Standard Bidding Document

📑 Framework Notice (NIT)

PURCHASE OF STATIONERY & COMPUTER STATIONERY

Published on: Thursday, October 1, 2026 05:00 PM

Ref# : FFW10221
QR Code

INVITATION FOR PREQUALIFICATION FOR CLOSED FRAMEWORK AGREEMENT

PROCUREMENT OF GOODS

  1. The Pakistan Software Export Board (PSEB) (Pakistan Software Export Board (PSEB)) has sufficient / has received / intends to apply for funds from Non-ADP and intends to apply part of such funds toward payments under the Framework Agreement for PURCHASE OF STATIONERY & COMPUTER STATIONERY having reference number FFW10221.
  2. The Pakistan Software Export Board (PSEB) (Pakistan Software Export Board (PSEB)) intends to prequalify suppliers for subsequent Invitation to Bid(s) and to sign a Closed Framework Agreement with the successful bidder(s) following completion of the bidding process.
  3. The objective of the intended Closed Framework Agreement is the on-demand supply of PURCHASE OF STATIONERY & COMPUTER STATIONERY through subsequent Call-Off Contract(s) during the Framework Agreement period. The purpose of this Prequalification Notice is to provide basic information to enable potential applicants to decide whether to respond to this Prequalification Notice.
  4. Only the prequalified applicants shall be entitled to participate in the subsequent procurement proceedings. It is expected that Invitations to Bid will be issued to the Prequalified Applicants in Wednesday, September 30, 2026. The Closed Framework Agreement is expected to be signed with the successful bidder(s) in Thursday, October 29, 2026 for a period of 9 Months.
  5. The Prequalification process is open to all National Applicants subject to fulfilling the eligibility requirements specified in the Prequalification Documents. Interested Applicants may obtain further information from Pakistan Software Export Board (PSEB) (Pakistan Software Export Board (PSEB)) through EPADS v2.0 during office hours. A complete set of Prequalification Documents may be accessed by interested Applicants through EPADS v2.0 at https://epads.gov.pk/opportunities/federal/framework-agreements/10221.
  6. The application, prepared in accordance with the instructions contained in the Prequalification Documents, must be submitted through EPADS v2.0 on or before Thursday, October 22, 2026 03:00 PM. Applications will be opened electronically through EPADS v2.0 on the same day at Thursday, October 22, 2026 03:30 PM. Manual submission of applications shall not be entertained.
  7. Vendors who have not yet registered on EPADS v2.0 may complete their registration at https://vendors.epads.gov.pk/. Guidance regarding registration and bid submission is available on the portal.

In terms of Rule 48 of Public Procurement Rules, 2004, the Grievance Redressal Committee (GRC) has been notified for the subject procurement. The notification is available on the Procuring Agency's website and on PPRA's website.

 

Pakistan Software Export Board (PSEB) (Pakistan Software Export Board (PSEB))
Administrative Assistant
6th Floor, New State Life Tower, Jinnah Avenue, Blue Area, Islamabad Capital Territory
+92-300-528-1549
aniaz@pseb.org.pk

📑 Instructions to Applicants (ITB)

PURCHASE OF STATIONERY & COMPUTER STATIONERY

Published on: Thursday, October 1, 2026 05:00 PM

Ref# : FFW10221
QR Code

A. General

  1. Scope of Application
    1. In connection with the “Invitation for Prequalification”, the Procuring Agency, as defined in Section II (Prequalification Data Sheet abbreviated as PDS), issues this set of Prequalification Documents (PD) to prospective applicants (also hereinafter referred as Applicants) interested in submitting applications (also hereinafter referred as Applications) to determine the capacity and capability of the Applicant(s) for supply of Goods and Related Services incidental thereto as specified in Section VII (Schedule of Requirements).
  2. Source of Funds
    1. Source of funds is same as referred in Invitation for Prequalification.
  3. Fraud and Corruption
    1. The Procuring Agency requires that the Applicants /Bidders/ Suppliers/Contractors under Government financed contracts, observe the highest standard of ethics during the procurement and execution of such agreements and contracts.
    2. The Applicants/Bidders shall permit and shall cause their agents (whether declared or not), sub-contractors, sub-consultants, service providers, suppliers, and their personnel, to permit the Procuring Agency to inspect all accounts, records and other documents relating to any, Application/Bid submission, Primary Procurement process, Framework Agreement performance, Secondary Procurement process, and/or Call-off Contract performance (in the case of award of a Call-off Contract), and to have them audited by auditors appointed by the Procuring Agency.
    3. Any communications between the Applicant and the Procuring Agency related to matters of alleged corrupt and fraudulent practices must be made in writing or in electronic forms that provide record of the content of communication.
    4. Procuring Agency will reject an application or bid or proposal, if it is established that the Applicant or the Bidder or Prosper was engaged in corrupt and fraudulent practices in competing for the contract.
    5. Procuring Agency will also declare the Applicant as blacklisted in accordance with Public Procurement Rule 19 and predefined standard mechanism.
  4. Eligible Applicants
    1. An Applicant may be a private entity, a state-owned enterprise or institution subject to ITB 4.6, or any combination of such entities in the form of a joint venture (JV) under an existing JV agreement or with the intent to enter into such an agreement supported by a letter of intent.
      In case of single (private or state-owned entity), it shall be liable for execution of all the provisions of the Framework Agreement (if signed b/w the Procuring Agency and the entity), the execution of any Call-off Contract(s) awarded (to the entity) under the Framework Agreement in accordance with the Call-off Contract conditions that apply.
      In the case of a joint venture, all members shall be jointly and severally liable for the execution of all the provisions of the Framework Agreement (if signed b/w the Procuring Agency and the JV), the execution of any Call-off Contract(s) awarded (to the JV) under the Framework Agreement in accordance with the Call-off Contract conditions that apply.
      The JV shall nominate a Representative who shall have the authority to conduct all business for and on behalf of any and all the members of the JV during the Prequalification process, Bidding process (in the event the prequalified JV submits a Bid) and during the period of framework agreement and contract execution (in the event the JV is awarded the Contract). Unless specified in the PDS, there is no limit on the number of members in a JV.
    2. An Applicant may apply for Prequalification both individually, and as part of a joint venture, or participate as a subcontractor. If prequalified as a JV only, it will not be permitted to bid for the same contract as an individual entity. Bids submitted in violation of this provision will be rejected.
    3. An Applicant and any of its affiliates (that directly or indirectly control, are controlled by or are under common control with that entity) may submit its Application for Prequalification either individually, as joint venture or as a sub-contractor among them for the same contract. However, if prequalified only one prequalified Applicant will be allowed to bid for the same contract. All Bids submitted in violation of this provision will be rejected.
    4. Applicants shall be considered to have a conflict of interest, if they participated as a consultant in the preparation of the design or technical specifications or have been hired or proposed to be hired by the Procuring Agency for execution of subsequent Framework Agreement(s) or Call-off Contract(s). In addition, Applicants may be considered to have a conflict of interest if they have a close business or family relationship with such professional staff of the Procuring Agency (or a recipient of a part of the funds) who:
      1. are directly or indirectly involved in the preparation of the Prequalification Documents or Bidding Documents or specifications of the Framework Agreement or Call-off Contract and/or the Prequalification or Bid evaluation process of such Contract; or
      2. would be involved in the implementation or supervision of such Framework Agreement or Call-off Contract, unless the conflict stemming from such relationship has been resolved throughout the Procurement Process, Bidding process during the execution of the Framework Agreement and/or Call-off Contract.
    5. An Applicant that has been declared debarred or blacklisted shall be ineligible to be prequalified to bid or enter into any Framework Agreement or Call-off Contract for such period of time and for such type of procurement for which he has been declared debarred or blacklisted. The list of debarred firms and individuals is available at PPRA’s website.
    6. An Applicant shall provide such documentary evidence for determining the eligibility of the Applicant to the reasonable satisfaction of the Procuring Agency.
  5. Eligibility (in terms of Nationality)
    1. Applicants may be ineligible if they are nationals of ineligible countries as indicated in Section V.

B. Contents of the Prequalification Documents

  1. Sections of Prequalification Documents
    1. This set of Prequalification Documents consists of Parts 1 and 2 which comprise all the sections indicated below, and which should be read in conjunction with any Addendum issued in accordance with ITA 8.
      PART 1 Prequalification Procedures
      • Section I - Instructions to Applicants (ITA)
      • Section II - Prequalification Data Sheet (PDS)
      • Section III - Qualification Criteria and Requirements
      • Section IV - Application Forms
      • Section V - Eligible Countries
      • Section VI - Fraud and Corruption
      PART 2 Supply Requirements
      • Section VII – Schedule of Requirements
    2. The Procuring Agency accepts no responsibility for the completeness of the Prequalification documents, responses to requests for clarification, the minutes of the pre-Application meeting (if any), or Addenda to the Prequalification documents in accordance with ITA 8. In case of any discrepancies, documents issued directly through ePADS shall prevail.
    3. The Applicant is expected to examine all instructions, forms, and terms in the Prequalification Documents and to furnish with its Application all information or documentation as is required by the Prequalification Documents.
  2. Clarification of Prequalification Documents and Pre-Application Meeting
    1. An Applicant requiring any clarification of the Prequalification Documents shall contact the Procuring Agency in writing through ePADS. The Procuring Agency will respond in writing through ePADS to any request for clarification provided that such request is received no later than three (03) days prior to the deadline for submission of the Applications. The Procuring Agency shall forward a copy of its response to all prospective Applicants through ePADS who have obtained the Prequalification Documents from ePADS, including a description of the inquiry but without identifying its source. If so indicated in the PDS, the Procuring Agency shall also promptly publish its response through ePADS. Should the Procuring Agency deem it necessary to amend the Prequalification Documents as a result of a clarification, it shall do so in accordance with the provisions of ITA 16.2.
    2. If indicated in the PDS, the Applicant’s designated representative is invited at the Applicant’s cost to attend a pre-Application meeting through online platform / ePADS as per date and time mentioned in the PDS. During this Pre-Application meeting, prospective Applicants may request clarification of the schedule of requirement, the qualification criteria or any other aspects of the Prequalification Documents.
    3. Minutes of the Pre-Application meeting, if applicable, including the text of the questions asked by Applicants, including those during the meeting (without identifying the source) and the responses given, together with any responses prepared after the meeting will be transmitted promptly through ePADS to all prospective Applicants who have obtained the Prequalification Documents. Any modification to the Prequalification Documents that may become necessary as a result of the pre-Application meeting shall be made by the Procuring Agency exclusively through the use of an Addendum pursuant to ITA 8 and through ePADS. Non-attendance at the pre-Application meeting will not be a cause for disqualification of an Applicant.
  3. Amendment of Prequalification Documents
    1. At any time prior to the deadline for submission of Applications, the Procuring Agency may amend the Prequalification Documents by issuing an Addendum through ePADS.
    2. Any Addendum issued shall be part of the Prequalification Document and shall be communicated in writing through ePADS to all Applicants who have obtained the Prequalification Documents from the Procuring Agency. The Procuring Agency shall promptly publish the Addendum at the Procuring Agency’s web page and ePADS.
      Provided that an Applicant who had already submitted their Applications prior to the issuance of any such addendum shall have the right to withdraw his already submitted Application and submit the revised Application prior to the original or extended Application submission deadline through ePADS.
    3. To give Applicants reasonable time to take an Addendum into account in preparing their Applications, the Procuring Agency may at its discretion, extend the deadline for the submission of Applications in accordance with ITA 16.2:
      Provided that the Procuring Agency shall extend the deadline for submission of Applications, if such an addendum is issued within last three (03) days of the Application submission deadline.

C. Preparation of Applications

  1. Cost of Applications
    1. The Applicant shall bear all costs associated with the preparation and submission of its Application. The Procuring Agency will in no case be responsible or liable for those costs, regardless of the conduct or outcome of the Prequalification process.
  2. Language of Application
    1. The Application as well as all correspondence and documents relating to the Prequalification exchanged by the Applicant and the Procuring Agency, shall be written in the language specified in the PDS. Supporting documents and printed literature that are part of the Application may be in another language, provided they are accompanied by an accurate translation of the relevant passages in the language specified in the PDS, in which case, for purposes of interpretation of the Application, the translation shall govern.
  3. Documents Comprising the Application
    1. The Application shall comprise the following:
      1. Application Submission Letter, in accordance with ITA 12.1;
      2. Eligibility: documentary evidence establishing the Applicant’s eligibility, in accordance with ITA 13.1;
      3. Qualifications: documentary evidence establishing the Applicant’s qualifications, in accordance with ITA 14; and
      4. any other document required as specified in the PDS.
  4. Application Submission Letter
    1. The Applicant shall complete an Application Submission Letter as provided in Section IV (Application Forms). This Form must be completed without any alteration to its format.
  5. Documents Establishing the Eligibility of the Applicant
    1. To establish its eligibility in accordance with ITA 4, the Applicant shall complete the eligibility declarations in the Application Submission Letter and Form ELI-1.1 (eligibility), included in Section IV (Application Forms).
  6. Documents Establishing the Qualifications of the Applicant
    1. To establish its qualifications to perform the contract(s) in accordance with Section III (Qualification Criteria and Requirements), the Applicant shall provide the information requested in the corresponding Information Sheets included in Section IV (Application Forms).
    2. Wherever an Application Form requires an Applicant to state a monetary amount, Applicants should indicate the Pak Rupee equivalent using the rate of exchange determined as follows:
      1. for turnover or financial data required for each year - Exchange rate prevailing on the last day of the respective calendar year (in which the amounts for that year is to be converted).
      2. value of single contract - Exchange rate prevailing on the date of the contract.
    3. Exchange rates shall be taken from the publicly available source identified in the PDS. Any error in determining the exchange rates in the Application may be corrected by the Procuring Agency.
    4. The documentary evidence of the Applicant’s qualifications to conclude a Framework Agreement, and/or to perform any Call-off Contract(s) if awarded, shall establish to the Procuring Agency’s satisfaction:
      1. that, if required in the BDS, an Applicant that does not manufacture or produce the Goods it offers to supply shall submit the Manufacturer’s Authorization using the form included in Section IV A (Bidding Forms) to demonstrate that it has been duly authorized by the manufacturer or producer of the Goods to supply these Goods in the Procuring Agency’s Country;
      2. that, if required in the BDS, in case of an Applicant not doing business within Islamic Republic of Pakistan (or the country where the procurement is being made), the Applicant is, or will be, (if awarded the call off contract) represented by an Agent in the country, equipped and able to carry out the Supplier’s maintenance, repair, and spare parts stocking obligations in respect of the Goods.

D. Submission of Applications

  1. Submission of the Applications through ePADS
    1. The Bidder shall prepare and submit Bid with due diligence after carefully reading all the terms and condition before submission through ePADS in accordance with the procedures specified in the PDS.
    2. In case the Applicant is a JV, the Application shall submit an authorized representative of the JV on behalf of the JV and so as to be legally binding on all the members as evidenced by a power of attorney signed by their legally authorized signatories.
  2. Deadline for Submission of Applications
    1. Applicants shall be submitted through ePADS no later than the deadline indicated in the PDS.
    2. If required in accordance with the provisions of ITA 8.3, the Procuring Agency will extend the deadline for the submission of Applications, in which case all rights and obligations of the Procuring Agency and the Applicants subject to the previous deadline shall thereafter be subject to the deadline as extended.
    3. The deadline will be extended in the same manner as that of original Invitation for Prequalification (or the advertisement) through ePADS.
  3. Opening of Applications
    1. The Procuring Agency shall open all Applications on the date and time specified in the PDS through ePADS. Late Applications shall be treated in accordance with ITA 16.1.

E. Procedures for Evaluation of Applications

  1. Confidentiality
    1. Information relating to the Applications, their evaluation and results of the Prequalification shall not be disclosed to Applicants or any other persons not officially concerned with the Prequalification process until the notification of Prequalification results is made to all Applicants in accordance with ITA 26 through ePADS.
    2. From the deadline for submission of Applications to the time of notification of the results of the Prequalification in accordance with ITA 26, any Applicant that wishes to contact the Procuring Agency on any matter related to the Prequalification process may do so only in writing through ePADS.
  2. Clarification of Applications
    1. To assist in the evaluation of Applications, the Procuring Agency may, ask an Applicant for a clarification (including missing documents) of its Application, to be submitted within a stated reasonable period of time. Any request for clarification from the Procuring Agency and all clarifications from the Applicant shall be in writing through ePADS.
    2. If an Applicant does not provide clarifications and/or documents requested by the date and time set in the Procuring Agency’s request for clarification, its Application shall be evaluated based on the information and documents available at the time of evaluation of the Application.
  3. Responsiveness of Applications
    1. The Procuring Agency may reject any Application which is not responsive to the requirements of the Prequalification Documents. In case the information furnished by the Applicant is incomplete or otherwise requires clarification as per ITA 19.1, and the Applicant fails to provide satisfactory clarification and/or missing information within prescribed time, it may result in disqualification of the Applicant.
  4. Margin of Preference
    1. Unless otherwise specified in the PDS, a margin of preference shall not apply in the Bidding process resulting from this Prequalification.
  5. Sub-contractors
    1. Subcontractors’ qualification and experience will not be considered for evaluation of the Applicant. The Applicant on its own (without taking into account the qualification and experience of the Subcontractor) should meet the qualification criteria.

F. Evaluation of Applications and Prequalification of Applicants

  1. Evaluation of Applications
    1. The Procuring Agency shall use the factors, methods, criteria, and requirements defined in Section III, Qualification Criteria and Requirements, to evaluate the qualifications of the Applicants, and no other methods, criteria, or requirements shall be used. The Procuring Agency reserves the right to waive minor deviations from the qualification criteria if they do not materially affect the technical capability and financial resources of an Applicant to perform the contract, however subject to the provisions of ITA 25.
    2. Subcontractors proposed by the Applicant shall be fully qualified for their parts of the Scope of Supply of the Goods and Allied Services.
    3. In case of multiple contracts, Applicants should indicate in their Applications the individual contract or combination of contracts in which they are interested. The Procuring Agency shall prequalify each Applicant for the maximum combination of contracts for which the Applicant has thereby indicated its interest and for which the Applicant meets the appropriate aggregate requirements. The Qualification Criteria and Requirements are mentioned in Section III.
    4. Only the qualifications of the Applicant shall be considered. The qualifications of other related entities such as the Applicant’s subsidiaries, parent entities, affiliates, subcontractors or any other firm(s) different from the Applicant shall not be taken into consideration in determining the qualifications of the Applicant.
  2. Procuring Agency’s Right to Accept or Reject Applications
    1. The Procuring Agency reserves the right to accept or reject all the Applications, and to annul the Prequalification process at any time, without thereby incurring any liability to the Applicants. However, the procuring agency shall record its reasons and justifications on ePADS, duly approved by the Principal Accounting Officer or Head of Organization.
  3. Prequalification of Applicants
    1. All Applicants whose Applications substantially meet or exceed the specified qualification requirements will be prequalified by the Procuring Agency.
    2. An Applicant may be “conditionally prequalified,” that is, qualified subject to the Applicant submitting or correcting certain specified nonmaterial documents or deficiencies to the satisfaction of the Procuring Agency.
    3. Applicants that are conditionally prequalified will be so informed along with the statement of the condition(s) which must be met to the satisfaction of the Procuring Agency before or at the time of submitting their Bids.
  4. Notification of Prequalification
    1. The Procuring Agency shall notify all Applicants in writing through ePADS indicating the names of those Applicants who have been prequalified or conditionally prequalified. In addition, those Applicants who have been disqualified will be informed separately through ePADS.
    2. The procuring agency shall communicate to those suppliers or contractors who have not been pre-qualified the reasons for not pre-qualifying them through ePADS.
  5. Request for Bids
    1. Promptly after the notification of the results of the Prequalification, the Procuring Agency will invite the Bids from all the Applicants that have been prequalified through ePADS.
  6. Changes in Qualifications of Applicants
    1. Any change in the structure or formation of an Applicant after being prequalified in accordance with ITA 25 and invited to bid (including, in the case of a JV, any change in the structure or formation of any member thereto) shall be subject to the written approval of the Procuring Agency prior to the deadline for submission of Bids. Such approval shall be denied if:
      1. a prequalified Applicant proposes to associate with a disqualified Applicant or in case of a disqualified joint venture, any of its members;
      2. as a consequence of the change, the Applicant no longer substantially meets the qualification criteria set forth in Section III, Qualification Criteria and Requirements; or
      3. in the opinion of the Procuring Agency, the change may result in a substantial reduction in competition.
    2. Any such change should be submitted to the Procuring Agency before the date of “Invitation to Bids”.
  7. Redressal of Grievances
    1. Procuring agency shall constitute a Grievance Redressal Committee (GRC) and proceed in accordance with the procedure and mechanism defined under Rule-65 of Public Procurement Rules, 2025.
    2. The GRC shall not have any of the members of Procurement Evaluation Committee. The committee must have one subject specialist depending on the nature of the procurement.
  8. Mechanism of Blacklisting
    1. The procuring agency shall initiate blacklisting or debarment proceedings against any bidder, supplier or contractor in accordance with the mechanism prescribed under Rule-25 of Public Procurement Rules, 2025 read with “Mechanism for Blacklisting Regulations, 2024”.

 

 

📑 Framework Data Sheet (BDS)

PURCHASE OF STATIONERY & COMPUTER STATIONERY

Published on: Thursday, October 1, 2026 05:00 PM

Ref# : FFW10221
QR Code

Framework Data Sheet (FDS)

The following specific data for the Framework Agreement shall complement, supplement, or amend the provisions in the Instructions to Applicants/Bidders (ITB). Whenever there is a conflict, the provisions herein shall prevail over those in ITB.

FDS Clause Number
ITB Number

Amendments of, and Supplements to, Clauses in the Instructions to Applicants/Bidders

A. General

FDS Clause Number 1
ITB Number 1.1

Identification Number of the Framework Agreement: FFW10221
The Procuring Agency is: Pakistan Software Export Board (PSEB) (Pakistan Software Export Board (PSEB))
Framework Agreement Title: PURCHASE OF STATIONERY & COMPUTER STATIONERY

FDS Clause Number 2
ITB Number 2.1

The name of Procuring Agency is: Pakistan Software Export Board (PSEB) (Pakistan Software Export Board (PSEB))
The name of Framework Agreement is: PURCHASE OF STATIONERY & COMPUTER STATIONERY

FDS Clause Number 3
ITB Number 2.2

Participating / Authorized Procuring Agencies under this Framework Agreement:

ITA Number 4.2

Maximum number of members in a Joint Venture (JV): Nil

FDS Clause Number 4
ITB Number 3.1

Framework Type: Closed Framework Agreement

FDS Clause Number 5
ITB Number 4.1

Framework Duration: 9 Months
Commencement Date: Expired after the framework duration of 9 months from the award date.
Expiry Date: Items Without Lots :

Item UNSPSC Delivery Schedule QuantitySample QuantityManufacturer / Dealer AuthorizationWarranty
Stationery & Computer Stationery Stationery
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days after issuance of purchase order Quantity: 1/Qty
1/Qty-- -- --

Lot Title : Stationery

Item UNSPSC Delivery Schedule QuantitySample QuantityManufacturer / Dealer AuthorizationWarranty
Ball Pen Blue Ball point pens
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 150/Qty
150 / Qty1 -- --
Ball Pen Black Ball point pens
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 150/Qty
150 / Qty1 -- --
Gel Pens Pointers Gel pens
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 60/Qty
60 / Qty1 -- --
Highlighter Highlighters
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 40/Qty
40 / Qty1 -- --
Permanenet Markers Markers
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 48/Qty
48 / Qty1 -- --
White Board Markers Markers
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 48/Qty
48 / Qty1 -- --
Pencils Pen or pencil sets
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 15/box
15 / box1 -- --
Erasers Erasers
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 27 Days Quantity: 90/Qty
90 / Qty1 -- --
Pencil Sharpners Manual pencil sharpener
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 180/Qty
180 / Qty1 -- --
Correction Pen/ Fluid Correction fluid
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 46/Qty
46 / Qty1 -- --
Rulers Rulers
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 15/Qty
15 / Qty1 -- --
Glue Sticks Glues
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 20/Qty
20 / Qty1 -- --
Scissors Scissors
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 10/Qty
10 / Qty1 -- --
Paper Cutter Cutters
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 20/Qty
20 / Qty1 -- --
Stapler Machine Medium Staplers
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 20/Qty
20 / Qty1 -- --
Stapler Heavy Duty Staplers
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 2/Qty
2 / Qty1 -- --
Stapler Pins Pins or tacks
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 100/Qty
100 / Qty1 -- --
Heavy Duty Stapler Pins Pins or tacks
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 20/Qty
20 / Qty1 -- --
Stapler Remover Heavy Duty Staple removers
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 20/Qty
20 / Qty1 -- --
Paper Clips Small Paper clips
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 27 Days Quantity: 25/pack
25 / pack1 -- --
Paper Clips Large Paper clips
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 27 Days Quantity: 25/pack
25 / pack1 -- --
Binder Clips Binder or bulldog clips
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 10/box
10 / box1 -- --
A4 Plain Paper Printer or copier paper
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 250/Qty
250 / Qty1 -- --
A4 Colored Papers Printer or copier paper
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 3/Qty
3 / Qty1 -- --
Envelop A4 Size Standard envelopes
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 1000/Qty
1000 / Qty1 -- --
Envelops Legal Size Standard envelopes
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 500/Qty
500 / Qty1 -- --
Envelop Small Standard envelopes
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 1000/Qty
1000 / Qty1 -- --
Sticky Notes Identification tags
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 50/pack
50 / pack1 -- --
Index/ Divider Sheets Identification tags
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 150/set
150 / set1 -- --
Box Files Box file
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 1500/Qty
1500 / Qty1 -- --
Clip File Plastic Folders
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 50/Qty
50 / Qty1 -- --
Transparent Folders Folders
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 100/Qty
100 / Qty1 -- --
Color Tags Identification tags
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 50/pack
50 / pack1 -- --
Note pads Paper pads or notebooks
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 60/Qty
60 / Qty1 -- --
Calculators Desktop calculator
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 27 Days Quantity: 2/Qty
2 / Qty1 -- --
Two Hole Puncher Binding punch machine
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 27 Days Quantity: 15/Qty
15 / Qty1 -- --
Big Document Punchre Binding punch machine
Address: 6th Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , IslamabadFloor, New State Life Tower, Jinnah Avenue, Blue Area, Islamabad Capital Territory Schedule: 10 Days Quantity: 2/Qty
2 / Qty1 -- --
Cell AA/AAA Zinc coal battery
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 60/Qty
60 / Qty1 -- --
A4 Size Diaries Exceutive Paper pads or notebooks
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 25/Qty
25 / Qty1 -- --
Ink Refiller Blue Ink refills
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 10/Qty
10 / Qty1 -- --
Printing of Visiting Cards Business cards
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 12500/Qty
12500 / Qty1 -- --
Finger Moistener Fingerprint or palmprint ink rollers
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 10/Qty
10 / Qty1 -- --
Printing of Office PVC Card With Printing Business cards
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 25/Qty
25 / Qty1 -- --
Rubber Stamp Printy Ink or stamp pads
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 15/Qty
15 / Qty1 -- --
Dak Pad Leatheroid/MOU Signing File (Leather) Folders
Address: Pakistan Software Export Board (G) Limited, 02nd Floor, PIDC Building , Daftkhwan, F-5/1, Islamabad Schedule: 10 Days Quantity: 10/Qty
10 / Qty1 -- --

Lot Title : Computer Stationery

Item UNSPSC Delivery Schedule QuantitySample QuantityManufacturer / Dealer AuthorizationWarranty
Toner HP Printer 151-A Printer or facsimile toner
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 20/Qty
20 / Qty1 Any 1 Years
Toner Photocopier TN 628 Konica Minolta bizhub 451i Photocopier toner
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 5/Qty
5 / Qty1 Any 1 Years
Mouse Wireless Computer mouse
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 25/Qty
25 / Qty1 -- 1 Years
USB 64 GB Universal serial bus general packet radio service USB GPRS modem
Address: Pakistan Software Export Board, 2nd Floor, PIDC Building, Daftarkhawan, Plot # 13, F-5/1, , Islamabad Schedule: 10 Days Quantity: 25/Qty
25 / Qty1 -- 1 Years

FDS Clause Number 6
ITB Number 5.1

A list of debarred firms and individuals is available on PPRA website: https://ppra.gov.pk

B. Contents of the Framework Document

FDS Clause Number 7
ITB Number 7.1

For clarification, the Applicant shall seek clarifications through: EPADS v2.0

FDS Clause Number 8
ITB Number 7.1 & 8.2

Information related to the Framework Agreement shall be published on: EPADS v2.0

FDS Clause Number 9
ITB Number 7.2

Pre-Bid Meeting: Clarification Date: Thursday, October 15, 2026

C. Preparation of Applications / Bids

FDS Clause Number 10
ITB Number 10.1

This Framework Agreement Document has been issued in the language: English

FDS Clause Number 11
ITB Number 11.1(d)

Additional documents to be submitted through {SYSTEMSHORTTITLE}:

  1. BID FORM (On Letter Head of Company) Name of the Bidder
  2. Status Manufacturer O Authorized Dealer O General Trader O
  3. Address of the office
  4. Year of Establishment
  5. Experience More than 5 years O More than 3 years O More than 1 year O
  6. Registration No. of Registrar Firms
  7. Registration Date
  8. NTN No.
  9. FBR Registration Date
  10. AGPR Vendor No.
  11. Bank Account No.
  12. Bank Name and Branch
  13. Name of Proprietors with CNIC Nos.
  14. Bid Security

FDS Clause Number 12
ITB Number 14.2

Source for determining exchange rates: Not Applicable

E. Submission of Applications / Bids

FDS Clause Number 18
ITB Number 16.1

Deadline for Bid Submission:
Day: Thursday
Date: Thursday, October 22, 2026
Time: 03:00 PM

FDS Clause Number 19
ITB Number 17.1

Opening of Bids shall be conducted through: EPADS v2.0
Day: Thursday
Date: Thursday, October 22, 2026
Time: 03:30 PM
Virtual participation link: https://vendors.epads.gov.pk/

F. Evaluation and Award

FDS Clause Number 20
ITB Number 21.1

Margin of Domestic Preference: Not Applicable

FDS Clause Number 21
ITB Number 22.1

Framework Award Basis: Least Cost Based Selection (LCBS)

FDS Clause Number 22
ITB Number 23.1

Suppliers admitted to the Framework Agreement shall not be guaranteed any minimum quantity, value, or volume of business unless otherwise stated in the Framework Agreement.

FDS Clause Number 23
ITB Number 29.1

Framework-related complaints / grievances shall be submitted in writing through: EPADS v2.0
A complaint may challenge:

  • The terms of the Framework Agreement Documents
  • The Procuring Agency’s evaluation decision
  • The Procuring Agency’s Framework Award decision

 

Framework Items / Lots

Brief Description

Purchase of Stationery and Computer Stationery 

Related Services of Consultancy Services:

Yes

Computer Stationery

Position Related Services
Toner HP Printer 151-A Installation, Testing and Commisioning
Toner Photocopier TN 628 Konica Minolta bizhub 451i Installation, Testing and Commisioning

Specification

Positions Without Lots :

Position: Stationery & Computer Stationery

Specifications / Requirements:

Brand Trodat Upto 3 Lines Blue or black inkpad ONLINE STAMP HOUSE Trodat text stamp self-inking 4913Printy

Lot Title : Stationery

Position: Ball Pen Blue

Specifications / Requirements:

Retractable Ballpoint Pen in 0.7 mm Tip for smooth effortless writing Retractable push-button mechanism. Durable Plastic Pocket Clip Round Body/Barrel. Soft Grip. Low-viscosity ink Available Colours: Blue

Position: Ball Pen Black

Specifications / Requirements:

Retractable Ballpoint Pen in 0.7 mm Tip for smooth effortless writing Retractable push-button mechanism. Durable Plastic Pocket Clip Round Body/Barrel. Soft Grip. Low-viscosity ink Available Colours: Black

Position: Gel Pens Pointers

Specifications / Requirements:

1.0mm Broad Tip for bold and clear writing Extremely Smooth Gel Ink Flow & Comfortable Rubber Grip for better control Classic Stick Gel Pen Design Super Smooth Ink Performance without skipping

Position: Highlighter

Specifications / Requirements:

5 mm shoulder tip. Japanese Acrylic tips, and 90 (chisel tip) Fluorescent ink for text-marking/highlighting. Usable for paper, copy, fax Shows the property of light fastness of the respective instrument-ink Available in Yellow, Green and Blue colours which are Fluorescent.

Position: Permanenet Markers

Specifications / Requirements:

Heavy-duty wear-resistant 70 / 2 mm Round Tip Permanent Marker, is permanent on Plastic, Glass, Metal, Fibre and More Water proof and light fast on a wide variety of surfaces Available Colours: Blue and Black

Position: White Board Markers

Specifications / Requirements:

Premium Whiteboard Marker for glass, flip charts and board marking Durable tip. Long life. Easy to refill. Non-toxic material Wipe-able ink on non-absorbent surfaces. Refillable and recyclable marker Available in 4 different ink colours: Blue, Black

Position: Pencils

Specifications / Requirements:

2 ½ HB Black Graphite Lead Pencils for daily Office / School. In Pack of 10 Specially formulated break-resistant lead. Rubber-tipped pencil Fully bonded 2 ½ HB black graphite lead to prevent any breakage Available in 10 Pencil packs in blue, red, pink & green assorted colours

Position: Erasers

Specifications / Requirements:

High quality eraser for pencils·which is Made in Germany Gentle on paper Latex-free, Phthalate-free· Per Piece Dimensions: 65 x 21 x 12 mm

Position: Pencil Sharpners

Specifications / Requirements:

high-quality pencil sharpeners Durable blades for precise, clean cuts Ideal for classrooms, offices, and art studios Compact and easy to use

Position: Correction Pen/ Fluid

Specifications / Requirements:

Multi-purpose and Quick Drying Produces strong, even, bold white lines or highlights Any pen rewrites on Correction Pen Special soft and fine metal tip 0.02 mm

Position: Rulers

Specifications / Requirements:

Material: Stainless Steel Length: 12 Inches (30cm) Weight: 38g Premium and long lasting quality stainless steel Size 12 inch 0.9mm

Position: Glue Sticks

Specifications / Requirements:

Material: Stainless Steel Length: 12 Inches (30cm) Weight: 38g Premium and long lasting quality stainless steel

Position: Scissors

Specifications / Requirements:

Made of a 2.0mm stainless steel polished blade TPE soft handles for easy handling and a pointed tip for safe usage Non-sticky surface. Strong rivet for durability and Heavy duty cut Office and school scissors.

Position: Paper Cutter

Specifications / Requirements:

Utility Knife Paper Cutter Rotary Lock with 18 mm SK5 steel blade Blades snap-off using end cap to provide 8 additional blade segments Made of durable ABS + carbon tool steel + Cold rolled steel plate Product Dimensions: 160 x 3 5 x 26 mm (cutter). 3 x Blades included

Position: Stapler Machine Medium

Specifications / Requirements:

Size & Spec.:25sheets,24/6 & 26/6 Material: Steel + ABS cap and bottom, metal stapler structure Half strip stapler Metal pull bar Metal wrap touch Paper edge distance:65mm Product size:137.000*44.000*60.000MM Metal wrap cover and based for super comfortable holding Convenient low-staple indicator Metal pull bar for extra durability Anti-skid base

Position: Stapler Heavy Duty

Specifications / Requirements:

210 Pages Heavy Duty Stapler has integrated staples storage part Rotatable anvil for permanent and temporary stapling. Anti-skid base Patented jammed staple remover mech. Comfort touch handle to ease stapling Fully adjustable paper guide. Front Loading mechanism and Paper Stop System

Position: Stapler Pins

Specifications / Requirements:

No. 10 Stapler Pins Max Staple Capatcity: Up to 15 Sheets/Papers of 70 gsm Galvanized Steel Wire

Position: Heavy Duty Stapler Pins

Specifications / Requirements:

24/8 Stapler Pins Max Staple Capatcity: Up to 40 Sheets/Papers of 70 gsm

Position: Stapler Remover Heavy Duty

Specifications / Requirements:

Remover for Stapler Pins Number: B8, 26/6, 24/6, 23/6, 23/8, upto 23/23 Heavy Duty Staple Removing Capacity: 200 Sheets/Papers Material: All Metal Construction Colours Available: Black

Position: Paper Clips Small

Specifications / Requirements:

Paper Clips 33mm (E39716) vinyl-coated document fastening clips. Product Type: Office stationery supplies, document fasteners, paper clips, and desk accessories. Design & Features: Features a 33mm standard length, assorted vibrant color finish, smooth anti-rust coating, and flexible wire construction. Material & Build: Manufactured from durable spring steel wire protected with a smooth colored plastic vinyl coating.

Position: Paper Clips Large

Specifications / Requirements:

Paper Clips 50mm (E39716) vinyl-coated document fastening clips. Product Type: Office stationery supplies, document fasteners, paper clips, and desk accessories. Design & Features: Features a 33mm standard length, assorted vibrant color finish, smooth anti-rust coating, and flexible wire construction. Material & Build: Manufactured from durable spring steel wire protected with a smooth colored plastic vinyl coating.

Position: Binder Clips

Specifications / Requirements:

Office stationery, paper fasteners, and desk organization tools. Design & Features: Features a 25mm standard width size, tempered steel wire arms, black-finished metal body, and a reusable folding grip mechanism. Material & Build: Manufactured from high-tensile spring steel engineered for strong clamping force, corrosion resistance, and long-term paper retention.

Position: A4 Plain Paper

Specifications / Requirements:

Paper Size: A4 (210 × 297 mm / 8.27 × 11.69 inches)Paper Weight (GSM): 100 gsm (grams per square meter), indicating a thicker, sturdier build than standard 100gms office paper Sheets per Ream: Typically 500 sheets Color: High bright white finish for enhanced color contrast and sharpnessSurface Texture: Extra smooth finish designed for low dust content, reducing jams and curling in printers Printer Compatibility: Suitable for laser printers, inkjet printers, photocopiers, and offset printing

Position: A4 Colored Papers

Specifications / Requirements:

Paper Weight (GSM): 80gsm (grams per square meter), indicating standard copy-paper thickness that prevents basic ink bleed. Standard Size: A4 (210 x 297 mm / 8.27 x 11.69 inches), with alternative sizes like A3, A5, Letter, and Legal available from select manufacturers. Sheet Quantities: Commonly packaged in 100-sheet or 500-sheet reams, available in single colors or assorted multi-color packs. Material Composition: Typically manufactured from 100% virgin wood pulp, often acid-free to ensure long-term color stability. Printer Compatibility: Engineered for jam-free performance in inkjet printers, laser printers, high-speed copiers, and manual writing. Common Applications: Utilized for office document coding, flyers, school art projects, origami, and scrapbooking

Position: Envelop A4 Size

Specifications / Requirements:

Color BROWN or WHITE Size A4 Material Paper Pattern Plain GSM 70 GSM

Position: Envelops Legal Size

Specifications / Requirements:

Paper Envelopes Colour: Brown or White Size: Legal (5 × 11.5 inches (127 × 292 mm))

Position: Envelop Small

Specifications / Requirements:

Dimensions:(6x9 inches) 80 gms White or Brown

Position: Sticky Notes

Specifications / Requirements:

Removable Self-Adhesive Memo/Sticky Notes Size: 3×5 Inches / 76×126 mm 100 Sheets in Single Colour. Light Pastel Colours Available Colours: Light Pink, Light Yellow, Light Blue, Light Green

Position: Index/ Divider Sheets

Specifications / Requirements:

Product Type: Document sorting and filing accessory consisting of multi-punched stiff index sheets used to categorize loose sheets and important records. Material & Build: Constructed from good and strong plastic manufacture utilizing thin, stiff polymer stock designed to keep paper and important documents neatly organized. Dimensions & Layout: Standard A4 sizing measuring approximately 22 cm in width by 29.7 cm in height, featuring multi-punched margin holes for ring binders and lever-arch files. Color: Multicolor tab indexing system featuring numbered colored sections for quick visual categorization. Application Use: Ideal for organizing office files, school projects, legal documentation, and administrative records. Paper Quality Card Board

Position: Box Files

Specifications / Requirements:

A4 Size Lever Arch Box File File Width: 3 Inches. Material: PVC Available Colours: Blue & Black Document Handling Size: A4 (8.27 x 11.69 Inches / 210 x 297 mm)

Position: Clip File Plastic

Specifications / Requirements:

Extra side pocket Upper side wrapped tag which is used for to write name of file by hand One sided transparent Plastic strong adhesive clip adjust plastic clip for grapping docs Used for multipurpose docs

Position: Transparent Folders

Specifications / Requirements:

Size: A4 Material: PP Thickness: 0.12mm Quantity: 12 L Shape Folders Made with high-quality pp material, eco-friendly and non-toxic. Flexible and durable L-shaped...

Position: Color Tags

Specifications / Requirements:

Multi color Good Quality

Position: Note pads

Specifications / Requirements:

Size: 4.1″ x 5.8″ (A6) Pages: 200 Pages (100 Sheets) 70g Offset Paper

Position: Calculators

Specifications / Requirements:

14-digit large LCD display Dual Power: Solar + Battery Check & Correct function (Auto Replay) Grand Total (GT) & Memory functions Percentage (%) & Square Root (√) calculations Large, easy-to-press keys Durable desktop design

Position: Two Hole Puncher

Specifications / Requirements:

20 Pages 2-Hole Punch Machine Construction: Metal & Plastic Built-in Lock. Removable Chip Tray. Precise Paper Guide

Position: Big Document Punchre

Specifications / Requirements:

290-Sheet Capacity: Heavy-duty manual punch for thick report stacks, calendars and thesis volumes. 6 mm Twin Holes: Standard 70/80 mm hole spacing fits ring binders and filing systems. Spring-Assisted Lever: High-leverage handle reduces operator effort on large stacks. Guide Bar: Adjustable margin guide for consistent hole alignment every punch. Removable Chip Tray: Easy paper-confetti disposal keeps the workspace clean. Anti-Skid Base: Protects desk surfaces during repeated commercial use.

Position: Cell AA/AAA

Specifications / Requirements:

AA Specifications SHD AA Batteries offer stable and long-lasting current providing Reliable power for high-drain devices. Ultra-long lifespan No mercury and no cadmium added to the formula AAA Specification SHD AAA Batteries offer stable and long-lasting current providing Reliable power for high-drain devices. Ultra-long lifespan No mercury and no cadmium added to the formula

Position: A4 Size Diaries Exceutive

Specifications / Requirements:

Premium Diary/ Journal With Self Texture Finishing and Executive Mobile Pocket Premium quality pages Top notch quality with unique design Flexible pocket to hold your Mobile, Documents and Pen as well A5 size 5.8 x 8.3 inches No of pages: 110 papers X 2 = 220 pages

Position: Ink Refiller Blue

Specifications / Requirements:

Water-Based Stamp Pad Ink for Self-Inking Stamps & Shiny Stamp Pads Volume: 28 ml / 1 Oz Available Colour: Blue S-63,

Position: Printing of Visiting Cards

Specifications / Requirements:

300g Art Card 4 Color Printing

Position: Finger Moistener

Specifications / Requirements:

Best Quality Finger Wet Device Moistening gummed labels and envelopes for more accurate It helps in Easy counting. Best for paper sorting and filing. Nontoxic, odorless, non-greasy formula Used by bank tellers, cashiers, mailroom clerks, etc.

Position: Printing of Office PVC Card With Printing

Specifications / Requirements:

Type: Badge Holder Model Number: B-1 (Blue) Medium Border Material: PVC (Durable and Flexible) Color: Clear with Blue Medium Border (Stylish and Professional) Thickness: 200 Microns (Durable and long-lasting protection) Size: 102 x 65 mm (Perfect fit for most standard ID cards and badges) Pack Size: Pack of 20 (Ideal for teams, offices, or events)

Position: Rubber Stamp Printy

Specifications / Requirements:

Brand Trodat Upto 3 Lines Blue or black inkpad ONLINE STAMP HOUSE Trodat text stamp self-inking 4913Printy

Position: Dak Pad Leatheroid/MOU Signing File (Leather)

Specifications / Requirements:

Made of thick and premium quality board Comes with two vertical flaps (9"x7.5") and two horizontal flaps (14x7.5") for extra protection Comes with a lace tie closure The back cover provides space for naming and personalizing the file for easy access Dimensions: 37 x 26 cm

Lot Title : Computer Stationery

Position: Toner HP Printer 151-A

Specifications / Requirements:

Product subgroup Standard Capacity Toner Cartridges Print Cartridge/Bottle, Color(s) Black Page yield (black and white) Average cartridge yields 3,050 standard pages. Declared yield value in accordance with ISO/IEC 19752. Print technology Laser Operating humidity range 20 to 80% RH Operating temperature range 32 to 95°F Operating temperature range 0 to 35°C Non-Operating Humidity Range 10 to 90% RH Storage temperature range -4 to 104°F Storage temperature range -20 to 40°C Package dimensions (W x D x H) 362 x 102 x 198 mm Weight ~0.72 kg Package weight ~1.07 kg What's in the box 1 toner cartridge; Recycling guide

Position: Toner Photocopier TN 628 Konica Minolta bizhub 451i

Specifications / Requirements:

Original Mfr/Compatible Black Toner Cartridge Original Mfr/Compatible Attribute Explanation: Genuine Page Yield Black Toner Cartridge Page Yield Attribute Explanation: Estimated 24,000 pages Color Black Toner Cartridge Color Attribute Explanation: Black Condition Black Toner Cartridge Condition Attribute Explanation: New Shipping Weight Black Toner Cartridge Shipping Weight Attribute Explanation: 1 lb 11 oz Shipping Dimensions Black Toner Cartridge Shipping Dimensions Attribute Explanation: 20.9” x 3.3” x 3.3” Machine Section Black Toner Cartridge Machine Section Attribute Explanation: Toner Supply

Position: Mouse Wireless

Specifications / Requirements:

Connectivity 2.4 GHz Wireless connection Encryption AES-128 bits encryption Tracking type Red optical tracking Dots per inch 1000 DPI - 1600 DPI (Default value: 1200 DPI) Number of buttons 3 Battery (1) AA alkaline battery (included) Color Jack Black System requirement USB port Compatibility Windows 10, 8, 7

Position: USB 64 GB

Specifications / Requirements:

USB 3.2 Gen 2 (originally USB 3.1): 10 Gbit/s.

Eligibility & Qualification Criteria

All Active Taxpayers shall be eligible to participate in the procurement process, unless expressly excluded or otherwise restricted under the Eligibility Criteria specified by the Procuring Agency.

Bidder's Type Required Registration

Sole Proprietorship

Partnership Firm

Company (Private Limited)

NADRA CITIZENSHIP (CNIC/NICOP)

FBR (NTN)

FBR (GSTN)

Eligibility Criteria Document
Complete Bid (Unit price with applicable taxes of all items of each lot should be quoted with required earnest money pay order/ demand draft). Yes
Bidder must be the Sales Tax & Income Tax registered from FBR Yes
Valid Active Taxpayer List from FBR Yes
The bidder must have physical office/store/ warehouse in Islamabad/Rawalpindi. Address of Office in Islamabad/Rawalpindi with proof document Yes
The bidders must submit the bid security for Rs. 75,000 for LOT-A and Rs. 50,000/- for LOT-B in the shape of demand draft/ pay order/CDR from the schedule bank in the favor of Pakistan Software Export Board and Original Bid Security must be submitted to PSEB Head Office within Bid Submission deadline. Yes

Evaluation Criteria

Least Cost Based Selection (LCBS)

Call-Off / Secondary Procurement Procedure

📑 Annexure (ANX)

PURCHASE OF STATIONERY & COMPUTER STATIONERY

Published on: Thursday, October 1, 2026 05:00 PM

Ref# : FFW10221
QR Code

General Terms and Condition

Information (Read-Only)

📑 Procurement Forms (PFD)

PURCHASE OF STATIONERY & COMPUTER STATIONERY

Published on: Thursday, October 1, 2026 05:00 PM

Ref# : FFW10221
QR Code