In terms of Rule 65 of Public Procurement Rules, 2026, the Grievance Redressal Committee (GRC) has been notified for the subject procurement. The notification is available on the Procuring Agency's website and on PPRA's website.
Ministry of Religious Affairs & Interfaith Harmony (Ministry of Religious Affairs and Interfaith Harmony (MORA))
Section Officer
1st Floor, Kohsar Complex, T.U.V. Blocks, Pak Secretariat, Islamabad, Islamabad Capital Territory
+92-334-553-6199
sogeneralmora@gmail.com
The following specific data for the Framework Agreement shall complement, supplement, or amend the provisions in the Instructions to Applicants/Bidders (ITB). Whenever there is a conflict, the provisions herein shall prevail over those in ITB.
FDS Clause Number
ITB Number
Amendments of, and Supplements to, Clauses in the Instructions to Applicants/Bidders
FDS Clause Number 1
ITB Number 1.1
Identification Number of the Framework Agreement: FFW9751
The Procuring Agency is: Ministry of Religious Affairs & Interfaith Harmony (Ministry of Religious Affairs and Interfaith Harmony (MORA))
Framework Agreement Title: Framework Agreements of Machinery, Hardware, Software, IT Equipment, Furniture Fixture, Repair Building, Fire Safety equipment’s etc
FDS Clause Number 2
ITB Number 2.1
The name of Procuring Agency is: Ministry of Religious Affairs & Interfaith Harmony (Ministry of Religious Affairs and Interfaith Harmony (MORA))
The name of Framework Agreement is: Framework Agreements of Machinery, Hardware, Software, IT Equipment, Furniture Fixture, Repair Building, Fire Safety equipment’s etc
FDS Clause Number 3
ITB Number 2.2
Participating / Authorized Procuring Agencies under this Framework Agreement:
ITA Number 4.2
Maximum number of members in a Joint Venture (JV): Nil
FDS Clause Number 4
ITB Number 3.1
Framework Type: Open Framework Agreement
FDS Clause Number 5
ITB Number 4.1
Framework Duration: 36 Months Address: 1st Floor, Kohsar Complex, T.U.V. Blocks, Pak Secretariat, Islamabad, Islamabad Capital Territory Address: 1st Floor, Kohsar Complex, T.U.V. Blocks, Pak Secretariat, Islamabad, Islamabad Capital Territory Address: 1st Floor, Kohsar Complex, T.U.V. Blocks, Pak Secretariat, Islamabad, Islamabad Capital Territory Address: 1st Floor, Kohsar Complex, T.U.V. Blocks, Pak Secretariat, Islamabad, Islamabad Capital Territory Address: 1st Floor, Kohsar Complex, T.U.V. Blocks, Pak Secretariat, Islamabad, Islamabad Capital Territory Address: 1st Floor, Kohsar Complex, T.U.V. Blocks, Pak Secretariat, Islamabad, Islamabad Capital Territory Address: 1st Floor, Kohsar Complex, T.U.V. Blocks, Pak Secretariat, Islamabad, Islamabad Capital Territory
Commencement Date: Expired after the framework duration of 36 months from the award date.
Expiry Date:
Positions Without Lots :
Position
Delivery Schedule
Quantity
Repair of Hardware items etc
1/Qty
Repair/maintenance of machinery and equipment, including printers, computers, UPS, LED, fax, scanner, photocopier, air conditioners, water dispensers, refrigerators, CCTV cameras, sound systems, heaters, fans and allied equipment
1/Qty
Repair/maintenance of furniture and fixtures, including sofa sets, chairs, tables, almirahs, cabinets, racks and allied items
1/Qty
Repair/maintenance of Buildings and Structures, including whitewash, aluminium doors/windows, washrooms, PVC panels, corridors, plantation, aluminium partitions and allied works
1/Qty
Repair of IT Equipment's etc
1/Qty
Software
1/Qty
Fire Safety Equipment etc
1/Qty
FDS Clause Number 6
ITB Number 5.1
A list of debarred firms and individuals is available on PPRA website: https://ppra.gov.pk
FDS Clause Number 7
ITB Number 7.1
For clarification, the Applicant shall seek clarifications through: EPADS v2.0
FDS Clause Number 8
ITB Number 7.1 & 8.2
Information related to the Framework Agreement shall be published on: EPADS v2.0
FDS Clause Number 9
ITB Number 7.2
Pre-Bid Meeting: Clarification Date: Friday, October 9, 2026
FDS Clause Number 10
ITB Number 10.1
This Framework Agreement Document has been issued in the language: English
FDS Clause Number 11
ITB Number 11.1(d)
Additional documents to be submitted through {SYSTEMSHORTTITLE}:
No
FDS Clause Number 12
ITB Number 14.2
Source for determining exchange rates: Not Applicable
FDS Clause Number 18
ITB Number 16.1
Deadline for Bid Submission:
Day: Monday
Date: Monday, October 12, 2026
Time: 11:00 AM
FDS Clause Number 19
ITB Number 17.1
Opening of Bids shall be conducted through: EPADS v2.0
Day: Monday
Date: Monday, October 12, 2026
Time: 11:30 AM
Virtual participation link: https://vendors.epads.gov.pk/
FDS Clause Number 20
ITB Number 21.1
Margin of Domestic Preference: Not Applicable
FDS Clause Number 21
ITB Number 22.1
Framework Award Basis: Quality Based Selection (QBS)
FDS Clause Number 22
ITB Number 23.1
Suppliers admitted to the Framework Agreement shall not be guaranteed any minimum quantity, value, or volume of business unless otherwise stated in the Framework Agreement.
FDS Clause Number 23
ITB Number 29.1
Framework-related complaints / grievances shall be submitted in writing through: EPADS v2.0
A complaint may challenge:
SCOPE OF WORK Repair/Maintenance, Allied services.
The Ministry of Religious Affairs & Interfaith Harmony, Government of Pakistan, intends to pre-qualify eligible firms/workshops for provision of repair, maintenance, supply and allied services during Financial Year 2026-27. The scope of work shall cover the following categories, as and when required by the Ministry and against written work/supply orders:
IT Machinery, Equipment, Hardware & Software
Repair, maintenance, servicing, troubleshooting, installation and configuration of computers, laptops, printers, UPS, LED displays, fax machines, scanners, photocopiers, air conditioners, water dispensers, refrigerators, CCTV cameras, sound systems, heaters, fans and other allied equipment, including related hardware and approved software support.
Furniture & Fixtures
Repair, maintenance and restoration of sofa sets, chairs, tables, almirahs, cabinets, racks and other allied furniture and fixtures, including carpentry, upholstery, polishing, painting, fabrication and related works, where required.
 Building & Structure Maintenance
Repair, maintenance and minor renovation works of buildings and office premises, including washroom works, painting/whitewashing, aluminium doors/windows, aluminium partitions, tempered glass replacement, PVC panels, corridors and other allied civil/building works.
 Fire Safety Equipment
Supply, inspection, testing, repair, refilling/recharging, replacement and maintenance of fire safety equipment, including fire extinguishers, fire alarm systems, detectors and other allied fire safety equipment.
The Ministry of Religious Affairs & Interfaith Harmony, Government of Pakistan, intends to pre-qualify eligible firms/workshops for provision of repair, maintenance, supply and allied services during Financial Year 2026-27. The scope of work shall cover the following categories, as and when required by the Ministry and against written work/supply orders:
IT Machinery, Equipment, Hardware & Software
Repair, maintenance, servicing, troubleshooting, installation and configuration of computers, laptops, printers, UPS, LED displays, fax machines, scanners, photocopiers, air conditioners, water dispensers, refrigerators, CCTV cameras, sound systems, heaters, fans and other allied equipment, including related hardware and approved software support.
Furniture & Fixtures
Repair, maintenance and restoration of sofa sets, chairs, tables, almirahs, cabinets, racks and other allied furniture and fixtures, including carpentry, upholstery, polishing, painting, fabrication and related works, where required.
 Building & Structure Maintenance
Repair, maintenance and minor renovation works of buildings and office premises, including washroom works, painting/whitewashing, aluminium doors/windows, aluminium partitions, tempered glass replacement, PVC panels, corridors and other allied civil/building works.
 Fire Safety Equipment
Supply, inspection, testing, repair, refilling/recharging, replacement and maintenance of fire safety equipment, including fire extinguishers, fire alarm systems, detectors and other allied fire safety equipment.
No
Positions Without Lots :
Position: Repair of Hardware items etc
Specifications / Requirements:
The Contractor shall provide repair, maintenance, troubleshooting and servicing of computer hardware and allied IT equipment, as and when required by the Ministry. 1. The Contractor shall inspect and diagnose the equipment before undertaking repair work and shall provide an estimate/quotation for replacement parts, where required. 2. No major component or spare part shall be replaced without prior approval of the Ministry. 3. All replacement parts shall be new, genuine and of standard quality, unless otherwise approved by the Ministry. 4. The Contractor shall provide all necessary labour, tools, testing equipment and technical expertise required for the repair. 5. Repaired equipment shall be tested and demonstrated to the satisfaction of the Ministry before acceptance. 6. All replaced/old parts shall be returned to the Ministry. 7. The Contractor shall collect, transport and return equipment to the Ministry at its own risk and cost, where applicable, in accordance with the work order. 8. The Contractor shall provide a six-month warranty for repair work and replaced parts, unless otherwise specified in the work order. 9. Substandard, counterfeit or used parts shall not be installed. 10. The repair work shall be completed within the time specified in the relevant work order.Position: Repair/maintenance of machinery and equipment, including printers, computers, UPS, LED, fax, scanner, photocopier, air conditioners, water dispensers, refrigerators, CCTV cameras, sound systems, heaters, fans and allied equipment
Specifications / Requirements:
The Contractor shall provide repair, maintenance, troubleshooting and servicing of computer hardware and allied IT equipment, as and when required by the Ministry. 1. The Contractor shall inspect and diagnose the equipment before undertaking repair work and shall provide an estimate/quotation for replacement parts, where required. 2. No major component or spare part shall be replaced without prior approval of the Ministry. 3. All replacement parts shall be new, genuine and of standard quality, unless otherwise approved by the Ministry. 4. The Contractor shall provide all necessary labour, tools, testing equipment and technical expertise required for the repair. 5. Repaired equipment shall be tested and demonstrated to the satisfaction of the Ministry before acceptance. 6. All replaced/old parts shall be returned to the Ministry. 7. The Contractor shall collect, transport and return equipment to the Ministry at its own risk and cost, where applicable, in accordance with the work order. 8. The Contractor shall provide a six-month warranty for repair work and replaced parts, unless otherwise specified in the work order. 9. Substandard, counterfeit or used parts shall not be installed. 10. The repair work shall be completed within the time specified in the relevant work order.Position: Repair/maintenance of furniture and fixtures, including sofa sets, chairs, tables, almirahs, cabinets, racks and allied items
Specifications / Requirements:
The Contractor shall provide repair, maintenance, restoration and allied services for furniture and fixtures of the Ministry, as and when required, against written work orders 1. The Contractor shall inspect the furniture/fixture and identify the nature and extent of repair before commencing the work. 2. Replacement of any major component/material shall be carried out only with the prior approval of the Ministry. 3. All replacement materials shall be new and of standard quality and shall conform to the specifications approved by the Ministry. 4. The Contractor shall provide all necessary labour, tools, equipment and materials required for satisfactory completion of the repair work. 5. Repaired furniture shall be properly finished, functional and restored to an acceptable condition to the satisfaction of the Ministry. 6. Any polishing, painting, upholstery, carpentry, welding, fabrication or allied work required for completion of the repair shall be included where specified in the work order. 7. All replaced/removed parts and materials shall be returned to the Ministry. 8. Where furniture is required to be taken to the Contractor's workshop, collection, transportation and return shall be at the Contractor's risk and cost, unless otherwise specified in the work order. 9. The Contractor shall provide a six-month warranty for repair work and replaced parts, unless otherwise specified in the work order. 10. Substandard, defective or used materials shall not be used. Any defective or unsatisfactory work shall be rectified/replaced by the Contractor at no additional cost.Position: Repair/maintenance of Buildings and Structures, including whitewash, aluminium doors/windows, washrooms, PVC panels, corridors, plantation, aluminium partitions and allied works
Specifications / Requirements:
1. The Contractor shall inspect the site/work area and assess the nature and extent of work before commencement. 2. All materials shall be new, standard quality and approved by the Ministry. 3. The colour/shade of paint and other finishing materials shall be selected/approved by the Ministry before application. 4. Tempered glass shall be of the required thickness, size and specification as approved by the Ministry and shall be properly fitted and secured. 5. Aluminium sections, fittings and accessories used for repair/replacement shall be compatible with the existing installation and of standard quality. 6. The Contractor shall provide all necessary labour, tools, equipment, transportation and consumable materials required for completion of the work. 7. The work shall be completed neatly and professionally without causing damage to existing structures, furniture, fixtures or office equipment. 8. Any defective or substandard work/material shall be rectified or replaced by the Contractor at no additional cost. 9. The Contractor shall remove and dispose of debris/waste generated during the work from the site as directed by the Ministry. 10. The completed work shall be inspected and accepted by the Ministry after satisfactory completion.Position: Repair of IT Equipment's etc
Specifications / Requirements:
The Contractor shall first diagnose the fault and provide details of the required repair/replacement before undertaking major repair work. Replacement of any hardware component shall be subject to prior approval of the Ministry. All replacement parts shall be new, genuine and of standard quality, unless otherwise approved by the Ministry. The Contractor shall provide necessary technical staff, tools, testing equipment and technical expertise. Software shall be installed/configured only from licensed, authorized or Ministry-approved sources. The Contractor shall not install pirated, unauthorized or unlicensed software. The Contractor shall maintain confidentiality of all official data and shall not copy, disclose, transfer or access official data except as specifically authorized by the Ministry. Repaired equipment shall be properly tested and handed over in working condition. All replaced/removed hardware parts shall be returned to the Ministry. Repair work and replaced parts shall carry a six-month warranty, unless otherwise specified in the work order. Any defective or unsatisfactory work shall be rectified by the Contractor at no additional cost.Position: Software
Specifications / Requirements:
The Contractor shall first diagnose the fault and provide details of the required repair/replacement before undertaking major repair work. Replacement of any hardware component shall be subject to prior approval of the Ministry. All replacement parts shall be new, genuine and of standard quality, unless otherwise approved by the Ministry. The Contractor shall provide necessary technical staff, tools, testing equipment and technical expertise. Software shall be installed/configured only from licensed, authorized or Ministry-approved sources. The Contractor shall not install pirated, unauthorized or unlicensed software. The Contractor shall maintain confidentiality of all official data and shall not copy, disclose, transfer or access official data except as specifically authorized by the Ministry. Repaired equipment shall be properly tested and handed over in working condition. All replaced/removed hardware parts shall be returned to the Ministry. Repair work and replaced parts shall carry a six-month warranty, unless otherwise specified in the work order. Any defective or unsatisfactory work shall be rectified by the Contractor at no additional cost.Position: Fire Safety Equipment etc
Specifications / Requirements:
1. All fire safety equipment shall be inspected and tested by the Contractor before and after servicing/repair. 2. Any defective component requiring replacement shall be replaced only with new and standard-quality components, subject to approval of the Ministry. 3. Fire extinguishers requiring refilling/recharging shall be serviced and refilled with the appropriate extinguishing agent as specified for the respective type of extinguisher. 4. The Contractor shall carry out necessary pressure, functionality and operational tests, where applicable. 5. All equipment shall be properly installed, serviced and made operational to the satisfaction of the Ministry. 6. The Contractor shall provide necessary skilled personnel, tools, testing equipment and other resources required for the work. 7. The Contractor shall submit service/inspection reports indicating the condition of equipment and work carried out. 8. Any defective or substandard work/material shall be rectified or replaced by the Contractor at no additional cost. 9. Where applicable, the Contractor shall possess and maintain valid PSQCA certificate/license or any other applicable certificate/license issued by the competent regulatory authority, as required under the bidding document. 10. The Contractor shall comply with all applicable fire safety standards, laws, regulations and directions of the Procuring Agency.
All Active Taxpayers shall be eligible to participate in the procurement process, unless expressly excluded or otherwise restricted under the Eligibility Criteria specified by the Procuring Agency.
| Bidder's Type | Required Registration |
|---|---|
|
Individual / Individual Consultant Sole Proprietorship Partnership Firm Company (Private Limited) Company (Public Limited) Company (Holding Company) Company (Limited by Guarantee) State Owned Enterprise (Private Limited) State Owned Enterprise (Public Limited) |
NADRA CITIZENSHIP (CNIC/NICOP) FBR (NTN) FBR (GSTN) |
| Eligibility Criteria | Document |
|---|---|
| Active Tax Payer Certificate | Yes |
| Non Black listing affidavit of the firm | Yes |
Quality Based Selection (QBS)
| Technical Marks | 100 | |
|---|---|---|
| Passing Marks | 70 | |
| Technical Evaluation Criteria | ||
| Relevant Experience: The firm has demonstrated relevant experience of at least three (03) years in the provision of similar jobs/services. (Qualitative)(Doc Required) | 30 | |
| Financial Soundness: The firm has submitted bank statements for the last three (03) financial years, evidencing a minimum turnover of Rs. 30 million. (Qualitative)(Doc Required) | 20 | |
| Technical Staff / Professional Capability: Details of qualified technical staff/professionals have been provided, demonstrating adequate technical capability. (Qualitative)(Doc Required) | 20 | |
| Workshop / Office / Equipment / Infrastructure (Qualitative)(Doc Required) | 20 | |
| Past Performance / Completion Certificates (Qualitative)(Doc Required) | 10 | |