In terms of Rules 48 of Public Procurement Rules, 2004 Grievance Redressal Committee (GRC) is notified for the subject procurement and notification copy is available on the procuring agency’s website and also available on EPADS v2.0 as well as Authority’s website at (www.ppra.org.pk).
Quaid-e-Azam University Islamabad. (Ministry of Federal Education and Professional Training), Purchase Officer
Quaid-e-Azam University, Islamabad., Islamabad Capital Territory
+92-342-430-6291
pss@qau.edu.pk
The following specific data for the procurement of Consultancy Services to be procured shall complement, supplement, or amend the provisions in the Instructions to Bidders (ITB). Whenever there is a conflict, the provisions herein shall prevail over those in ITB.
BDS Clause Number
ITB Number
Amendments of, and Supplements to, Clauses in the Instruction to Bidders
1
1.1
Name of Procuring Agency: Quaid-e-Azam University Islamabad. (Ministry of Federal Education and Professional Training)
The subject of procurement is: HIRING OF ENGINEERING/ ARCHITECTURAL CONSULTANCY SERVICES FOR DESIGN AND TOP SUPERVISION OF THE PROJECT ESTABLISHMENT OF CHINA-PAKISTAN JOINT RESEARCH CENTRE (CPJRC) on Earth Sciences, Quaid-i-Azam University, Islamabad”. (June-2026)
Financial year for the operations of the Procuring Agency: 2026-27
Name and identification number of the Contract: P53366
BDS Clause Number 2
ITB Number 1.2 & 9.1
The Bidders may seek clarifications through EPADS v2.0: Clarification Date: Friday, July 10, 2026
Pre-Bid Meeting: Monday, July 13, 2026 02:00 PM
Venue: Committee Room Quaid-e-Azam University, Islamabad.
BDS Clause Number 3
ITB Number 4.1
The language of the proposals is: English
BDS Clause Number 4
ITB Number 6.1
Participation of Sub-consultants, Key Experts and Non-Key Experts in more than one Proposal is permissible? No
BDS Clause Number 6
ITB Number 7.1
Proposals shall be valid until 120 Days
BDS Clause Number 7
ITB Number 9.1
List of documents required along with the bid:
BDS Clause Number 8
ITB Number 10.2
The Consultant’s Proposal must include the minimum Key Experts’ time-input of __________person-months.
For the evaluation and comparison of Proposals only: if a Proposal includes less than the required minimum time-input, the missing time-input (expressed in person-month) is calculated as follows:
The missing time-input is multiplied by the highest remuneration rate for a Key Expert in the Consultant’s Proposal and added to the total remuneration amount. Proposals that quoted higher than the required minimum of time-input will not be adjusted. ]
BDS Clause Number 9
ITB Number 105
The price shall be Fixed.
Price schedule will be provided according to the format defined and acquired. see section price schedule.
BDS Clause Number 10
ITB Number 11.1
The qualification criteria to establish the supply / production capability of the bidder.
see Eligibility Criteria
BDS Clause Number 11
ITB Number 7.6
Services and Their related documents:
See section Required Services and ToR
BDS Clause Number 12
ITB Number 8.1 & 8.2
The amount of Bid Security shall be as defined in Bid Security Section for items and lots given in BDS 6
The Bid Security shall be in the form of: Pay Order, Banker's Cheque, Call at Deposit, Bank Guarantee, Demand Draft
BDS Clause Number 13
ITB Number 13.1
Currency of the Bids shall be : PKR
BDS Clause Number 14
ITB Number 14.1
Proposal shall be submitted online on EPADS v2.0 whereas hard copy of the bid security should be submitted to the following;
Quaid-e-Azam University, Islamabad., Islamabad Capital Territory
Bids that are not submitted on EPADS v2.0 shall be disqualified.
The deadline for Bids submission is: Monday, July 20, 2026 02:00 PM
BDS Clause Number 15
ITB Number 15.1
The Bids opening shall take place on EPADS v2.0.
Day : Monday
Date: Monday, July 20, 2026
Time : 02:30 PM
BDS Clause Number 16
ITB Number 20
Selection technique adopted will be: Least Cost Based Selection (LCBS)
see Evaluation Criteria
BDS Clause Number 18
ITB Number 21.5
The Performance guarantee shall: 0%.
The Performance Guarantee shall be acceptable in the form of: Nil
BDS Clause Number 19
ITB Number 24.1
Grievence against this procurement shall be submitted online on EPADS v2.0.
| Bidder's Type | Required Registration |
|---|---|
|
Individual / Individual Consultant Sole Proprietorship Company (Private Limited) Company (Public Limited) Company (Holding Company) Company (Limited by Guarantee) State Owned Enterprise (Private Limited) State Owned Enterprise (Public Limited) |
NADRA CITIZENSHIP (CNIC/NICOP) FBR (NTN) FBR (GSTN) PEC |
| Eligibility Criteria | Document |
|---|---|
| Technical Proposal 3.2 In preparing the technical proposal, you are expected to examine all terms and instructions included in the Documents. Failure to provide all requested information shall be at your own risk and result in rejection of your proposal. 3.3 During preparation of the technical proposal, you must give particular attention to the following: | Yes |
| i. Consultancy Firms registered on EPADS of PPRA and having valid registration with PEC & PCATP can apply only. Joint ventures with other firms are not allowed. ii. Subcontracting part of the Assignment to other consultants is not allowed. iii. Max five similar assignments (HEIs only) of Category C-I will fetch the full marks against the firm’s similar experience. Not more than two ongoing projects will be considered for technical evaluation. | Yes |
| iv. Max five general assignments (other than HEI’s) of building projects only of Category A of same services offered will fetch the full marks against the firm’s general experience. Not more than two ongoing projects will be considered for technical evaluation. v. The key professional staff proposed shall be permanent employees of the firm. vi. Proposed staff should have experience preferably under conditions similar to those prevailing in the area of the Assignment. | Yes |
| 3.4 Your technical proposal shall provide information, using the attached formats under Appendix-I. Additional information in support of your proposal may also be provided. 3.5 The technical proposal shall not include any financial information. The Consultant’s comments, if any, on the data, services and facilities to be provided by the Client and indicated in the TOR shall be included in the technical proposal. | Yes |
| 3.6 Mandatory Documents to be attached with Technical proposal are as under, i. Valid Certificate of registration of a Firm with PEC and PCATP. ii. National Tax Number of consultant(s). iii. A certificate / affidavit that the firm has not been blacklisted or debarred by any Government / Autonomous / International Body. | Yes |
| Financial Proposal 3.7 The financial proposal should include all the costs associated with the Assignment. These normally cover remuneration for staff in the field and at headquarters, per diem, housing, transportation for mobilization and demobilization, services and equipment (vehicles, office equipment, furniture and supplies), printing of documents. Your financial proposal should be prepared using the formats attached as Appendix-II, else the proposal of applicant firm will be rejected. | Yes |
| 3.8 Costs may be expressed in Pak Rs. Inclusive of all taxes. 3.9 All the prevailing applicable Govt. taxes will be deducted from the consultancy Fees. | Yes |
Least Cost Based Selection (LCBS)
| Technical Marks | 100 | |
|---|---|---|
| Passing Marks | 70 | |
| Technical Evaluation Criteria | ||
| Company Profile (Quantitative)(Doc Required) Financial Soundness Average Turn over for any three of last six years (Attach copy of Audited Bank Statements or Bank Account Statements or Certificate from Bank as Documentary Evidence) Max. 10 Marks a) Full (10) Marks will be awarded if each financial year’s turnover is more than PKR 2,000 million or above. b) 5 Marks will be awarded if each year’s turnover is between PKR 1,000 million to 2,000 million. c) No mark will be awarded if turnover is less than PKR 1,000 million. (15) ISO Certification Max. 03 Marks a) 03 Marks will be awarded if the firm has Valid ISO Certifications. b) No Marks will be awarded in absence of said ISO certification. (3) Firm Presence in Rwp/Isld Max. 02 Marks a) 02 marks if the applicant has fully functional design and construction supervision office particularly in Islamabad / Rawalpindi. b) No mark will be awarded, if no permanent office in Islamabad / Rawalpindi. The Evaluation Committee may visit the Consultants’ office to assess the firms’ presence and technical capabilities before awarding the marks (2) | 15 | |
| Firm Experience (Quantitative)(Doc Required) Specific / Similar Experience (Attach copy of Completion Certificate/ Consultancy Agreement as documentary evidences) (50) In-Hand Similar Project (Attach copy of Consultancy Agreement as documentary evidence) Max. 20 Marks a) 05 marks will be awarded up-to maximum of 20 marks for each Building Project with Min. Rs. 2,000 Million cost in last 10 years. b) 2.5 marks will be awarded upto maximum of 20 marks for each Building Project with Min. Rs. 1,000 Million cost in last 10 years. c) No marks will be awarded if given criteria is not fully complied. (10) General Civil Works and Construction Supervision (Attach copy of Completion Certificate/ Consultancy Agreement as documentary) Max. 15 Marks a) 03 marks will be awarded for each completed Civil Construction Project having cost more than Rs. 2,000 million and above in the last 15 years. b) 1.5 marks will be awarded for each completed Civil Construction Project having cost more than Rs. 1,000 million and above in the last 15 years. c) No marks will be awarded if given criteria is not fully complied. (15) International Projects or Projects funded by international donor agencies/ departments Max. 05 marks a) 2.5 mark will be awarded for each completed Project outside Pakistan or funded by International Donor Agency / Department having cost more than Rs. 1,000 million. b) No marks will be awarded if given criteria is not fully complied. (5) | 50 | |
| iii. QUALITY OF FIRM’S PERSONNEL EXPERTISE (Quantitative)(Doc Required) Project Manager / Team Leader Max. 05 Marks MSc. Engineer or above qualification with Minimum 25 years of experience (35) Architect Max. 04 Marks Masters in Architecture or above qualification with Minimum 15 years of experience. (4) Structural Design Engineer Max. 04 Marks MSc. in Structural Engineering qualification with Minimum 20 years of exp (5) Electrical Design Engineer Max. 03 Marks MSc. in Electrical Engineering qualification with Minimum 15 years of experience. (2) Infrastructure Design Engineer Max. 03 Marks MSc. in Civil Engineering qualification with Minimum 15 years of experience. Geotechnical Engineer Max. 03 Marks MSc. in Geotechnical Engineering qualification with Minimum 15 years of experience (6) Quantity Surveyor Max. 03 Marks B. Tech in Civil Technology qualification with Minimum 15 years of experience (3) Resident Engineer Max. 03 Marks 3-marks for MSc. in Civil / Construction Engineering qualification with Minimum 15 years of experience Assistant Resident Engineer Max. 03 Marks BSc Civil Engineering qualification with Minimum 10 years of experience Site Inspector Civil Max. 02 Marks DAE or above in Civil Technology with minimum 10 years’ of experience Site Inspector Electrical Max. 02 Marks DAE or above in Electrical Technology with minimum 10 years’ of experience (10) | 35 | |
Lot Title : HIRING OF ENGINEERING/ ARCHITECTURAL CONSULTANCY SERVICES FOR DESIGN AND TOP SUPERVISION OF THE PROJECT ESTABLISHMENT OF CHINA-PAKISTAN JOINT RESEARCH CENTRE (CPJRC) on Earth Sciences, Quaid-i-Azam University, Islamabad”. (June-2026)
Bid Security : 900000 PKR
| Position | Delivery Schedule | Quantity |
|---|---|---|
| Task-I Master planning with detail Topographic Survey of the allocated land for CPJRC ( -Kanals) | Address: Quaid-e-Azam University, Islamabad., Islamabad Capital Territory Schedule: 120 DaysQuantity: 50/acre |
50 |
| Task-II Geotechnical Investigation of the Site of Buildings etc. Bore | Address: Quaid-e-Azam University, Islamabad., Islamabad Capital Territory Schedule: 120 DaysQuantity: 12/job |
12 |
| Task-III Reseacrchlabs/Academic Area- (87865 Sft), Innovation And Facilitation Block (23160 sft) i) Detailed Architectural, Structural and other engineering designs of the Academic Block building with allied services/Infrastructure/ Firefighting syst | Address: Quaid-e-Azam University, Islamabad., Islamabad Capital Territory Schedule: 120 DaysQuantity: 87865/sqft |
87865 |
| Task -IV Boundary Wall- 3200 Rft Detailed Architectural, Structural and other engineering designs of the Boundary wall i/c some portion of Retaining wall with allied services/ Infrastructure including Cost Estimation, Bill of Quantities, Tender Docu | Address: Quaid-e-Azam University, Islamabad., Islamabad Capital Territory Schedule: 120 DaysQuantity: 3200/ft |
3200 |
| Task-IV Innovation and Facilitation Block- (23160 Sft) i) Detailed Architectural, Structural and other engineering designs of the Academic Block building with allied services/Infrastructure/Firefighting system including Cost Estimation, Bill of Quant | Address: Quaid-e-Azam University, Islamabad., Islamabad Capital Territory Schedule: 120 DaysQuantity: 23160/sqft |
23160 |
| Task-V Detailed Architectural, Structural and other engineering designs of various External development Works,including Utilities (Electricity Connection,Gas, Water connection etc)------including Cost Estimation, Bill of Quantities, Tender Documentat | Address: Quaid-e-Azam University, Islamabad., Islamabad Capital Territory Schedule: 120 DaysQuantity: 1/job |
1 |
| i- ICT services and Office Equipments Network infra. Computer/ Data storage & office related items ii- Data center establishment with NoC 24/7 IT services model iii- PBX voice Network and Biometric system Access setup | Address: Quaid-e-Azam University, Islamabad., Islamabad Capital Territory Schedule: 120 DaysQuantity: 1/job |
1 |
| Task-VII Top Supervision during Construction Phase (10-Visits) | Address: Quaid-e-Azam University, Islamabad., Islamabad Capital Territory Schedule: 120 DaysQuantity: 1/job |
1 |
| Task-VIII Providing Detail supervision during Construction (Man-month basis) Detail at Form-15 | Address: Quaid-e-Azam University, Islamabad., Islamabad Capital Territory Schedule: 120 DaysQuantity: 1/job |
1 |
No
Lot Title : HIRING OF ENGINEERING/ ARCHITECTURAL CONSULTANCY SERVICES FOR DESIGN AND TOP SUPERVISION OF THE PROJECT ESTABLISHMENT OF CHINA-PAKISTAN JOINT RESEARCH CENTRE (CPJRC) on Earth Sciences, Quaid-i-Azam University, Islamabad”. (June-2026)
Position: Task-I Master planning with detail Topographic Survey of the allocated land for CPJRC ( -Kanals)
Specifications / Requirements:
Position: Task-II Geotechnical Investigation of the Site of Buildings etc. Bore
Specifications / Requirements:
Position: Task-III Reseacrchlabs/Academic Area- (87865 Sft), Innovation And Facilitation Block (23160 sft) i) Detailed Architectural, Structural and other engineering designs of the Academic Block building with allied services/Infrastructure/ Firefighting syst
Specifications / Requirements:
Position: Task -IV Boundary Wall- 3200 Rft Detailed Architectural, Structural and other engineering designs of the Boundary wall i/c some portion of Retaining wall with allied services/ Infrastructure including Cost Estimation, Bill of Quantities, Tender Docu
Specifications / Requirements:
The Bid Evaluation Committee will correct any computational errors. When correcting computational errors, in case of discrepancy between a partial amount and the total amount, or between the word and figures, the former will prevail. In addition to the above corrections, activities and items described in the Technical Proposal but not priced, shall be deemed to be included in the prices of other activities or items
Position: Task-IV Innovation and Facilitation Block- (23160 Sft) i) Detailed Architectural, Structural and other engineering designs of the Academic Block building with allied services/Infrastructure/Firefighting system including Cost Estimation, Bill of Quant
Specifications / Requirements:
Position: Task-V Detailed Architectural, Structural and other engineering designs of various External development Works,including Utilities (Electricity Connection,Gas, Water connection etc)------including Cost Estimation, Bill of Quantities, Tender Documentat
Specifications / Requirements:
The Bid Evaluation Committee will correct any computational errors. When correcting computational errors, in case of discrepancy between a partial amount and the total amount, or between the word and figures, the former will prevail. In addition to the above corrections, activities and items described in the Technical Proposal but not priced, shall be deemed to be included in the prices of other activities or items.
Position: i- ICT services and Office Equipments Network infra. Computer/ Data storage & office related items ii- Data center establishment with NoC 24/7 IT services model iii- PBX voice Network and Biometric system Access setup
Specifications / Requirements:
Position: Task-VII Top Supervision during Construction Phase (10-Visits)
Specifications / Requirements:
The Bid Evaluation Committee will correct any computational errors. When correcting computational errors, in case of discrepancy between a partial amount and the total amount, or between the word and figures, the former will prevail. In addition to the above corrections, activities and items described in the Technical Proposal but not priced, shall be deemed to be included in the prices of other activities or items
Position: Task-VIII Providing Detail supervision during Construction (Man-month basis) Detail at Form-15
Specifications / Requirements:
FORM-15
DETAIL SUPERVISION (ON MAN-MONTH BASIS)
|
S. #. |
Task |
No. of Posts |
No. of Months |
Salary per month (Rs.) |
Amount (Rs.) |
|
1. |
Resident Engineer (RE) (BPS-18) |
01- No. |
36-months
|
|
|
|
2 |
Material Engineer (BPS-17) |
01-No. |
36-Months |
|
|
|
3 |
Asstt: Resident Engineer (Civil & MEP) BPS-16 |
02-Nos. |
36-Months |
|
|
|
4 |
Supervisors (Civil & MEP) BPS-11 |
02-Nos. |
36-Months |
|
|
|
5 |
Surveyor BPS-11 |
01-No. |
36-Months |
|
|
|
6. |
Computer Operator/WPO BPS-7 |
01-No. |
36-Months |
|
|
|
7 |
Office Boy/N.Q (BPS-1) |
01-No. |
36-Months |
|
|
|
|
Total Detail Supervision (Form-15) Rs. |
|
For Individual Positions
| # | Position Title | Quantity | Unit Price (PKR) | Total Price (PKR) | Delivery Location | Delivery Period / Year | Country of Origin |
|---|---|---|---|---|---|---|---|
| 1 | |||||||
| 2 |
| # | Lot Title | Total Lot Price (PKR) | Country of Origin |
|---|---|---|---|
| 1 | [Lot 1 Title] |
The following Special Conditions of Contract shall supplement the General Conditions of Contract. Whenever there is a conflict, the provisions herein shall prevail over those in the Conditions of Contract. The corresponding clause number of the GCC is indicated in parentheses.
Number of GC Clause
Amendments of, and Supplements to, Clauses in the General Conditions of Contract>
Number of GC Clause 3.1
The Contract shall be interpreted in accordance with the laws of Islamic Republic of Pakistan
Number of GC Clause 4.1
The language is English
Number of GC Clause 6.1 and 6.2
The addresses are:
The Procuring Agency is: Quaid-e-Azam University Islamabad. (Ministry of Federal Education and Professional Training), Purchase Officer Quaid-e-Azam University, Islamabad., Islamabad Capital Territory
The Consultant Address:
The title of the subject procurement is:HIRING OF ENGINEERING/ ARCHITECTURAL CONSULTANCY SERVICES FOR DESIGN AND TOP SUPERVISION OF THE PROJECT ESTABLISHMENT OF CHINA-PAKISTAN JOINT RESEARCH CENTRE (CPJRC) on Earth Sciences, Quaid-i-Azam University, Islamabad”. (June-2026)
Number of GC Clause 8.1
[Note: If the Consultant consists only of one entity, state “N/A”;Or
The Lead Member on behalf of the JV is ___________ ______________________________ [insert name of the member]
Number of GC Clause 9.1
The Authorized Representatives are:
The Authorized Representatives are:
For the Procuring Agency:
Quaid-e-Azam University Islamabad. (Ministry of Federal Education and Professional Training), Purchase Officer
Quaid-e-Azam University, Islamabad., Islamabad Capital Territory
+92-342-430-6291
pss@qau.edu.pk
For the Bidder:
Name: ………………………
Designation: ……………..
Address: ……………………………..
Number of GC Clause 11.1
[Note: If there are no effectiveness conditions, state “N/A”]OR
List here any conditions of effectiveness of the Contract]
The effectiveness conditions are the following: [insert “N/A” or list the conditions]
Termination of Contract for Failure to Become Effective:
The time period shall be _______________________ [insert time period, e.g.: four months].
Commencement of Services:
The number of days shall be_________________ [e.g.: ten].
Confirmation of Key Experts’ availability to start the Assignment shall be submitted to the Procuring Agency in writing as a written statement signed by each Key Expert.
Expiration of Contract:
The time period shall be ________________________ [insert time period, e.g.: twelve months].
Number of GC Clause 23.1
No additional provisions.
The following limitation of the Consultant’s Liability towards the Procuring Agency can be subject to the Contract’s negotiations:
3. SERVICES TO BE PROVIDED BY THE CONSULTANTS AND THEIR RESPONSIBILITIES The Consultant will provide the following services against each Task: Task-I: Master Planning with detail Topographic Survey of the allocated land for CPJRC ( -Acers) Task-II: Geo technical investigation of the Site proposed for the Academic Block of CPJRC etc. (12- Bors)
Task-III: Detailed designing and estimation of Research Labs/ Academic Area (87865 Sft) Detailed Architectural/ Engineering designing of the Research Labs/ Academic Area, innovation and facilitation block Infrastructure with Cost Estimates, Bill of Quantities (BoQ), Evaluation of contractor Quoted prices, Tender Documentation and Bid evaluation which include:
a. Prepare the approved General plans, Schematic design (Conceptual drawing may be provided by the client) of all the building along with the statement of probable construction cost and submission to Client.
b. Prepare from the approved Schematic Design and top supervision, the final Design and Development Documents, consisting of working drawings including plans, elevations and such other drawings, outline specifications to fix and illustrate entire building in its essentials as to kind of materials, type of structure, mechanical and electrical systems and such other works as may be required by the Client for approval. The working drawings shall comprise the following:
i) Detailed drawings of the buildings ii) Architectural drawings (internal and external) iii) Structural Design, Drawings and Calculations for record and check iv) Detailed Drawings related to Internal and External Water Supply, Sanitation and Drainage, Internal and External Electrification, HVAC points, Gas Installation and Communication System, Fire Fighting system etc
v) Detailed Drawings related to approach roads/ footpaths, Car Parking, landscaping, compound walls, gates and security posts etc. where required. vi) Prepare Detailed Cost Estimates including Rate Analysis of Non Schedule Items vii) Prepare detailed Bill of Quantities (BoQs), Estimates, Technical Specifications and Tender Documents including Terms and Conditions of Contract and evaluation of Bids. viii) Any other documents necessary for the proper implementation and construction of the buildin
ix) Approval of the design and Plans of Academic Block etc. from the Building Control Section (BCS) of CDA as per rules. x) To defend the design/plans before the Technical Committee and Building Committee. xi) To prepare As Built Drawings after Construction.
Task-IV. Detailed designing and estimation of Boundary Wall (3200-Rft) a. Preparation of detailed design drawings of boundary wall including Retaining wall in some portion b. Preparation of detailed design of Guard rooms and Electric Room. c. Preparation of detailed design of Main entrance and security checkup arrangements.
d. Preparation of Cost Estimates, Bill of Quantities, Technical Specifications and Tender Documents including Terms and Conditions of Contract and evaluation of Bids. e. To defend the design/plans before the Technical Committee and Building Committee.
Task-V: Detailed designing and estimation of External development works a. Preparation of detailed design drawings External Development Works including utilities (Electricity, gas, Water etc) b. Preparation of Cost Estimates, Bill of Quantities, Technical Specifications and Tender Documents including Terms and Conditions of Contract and evaluation of Bids. c. To defend the design/plans before the Technical Committee and Building Committee. d. To prepare As Built Drawings after Construction.
Task-VI: ICT services and Office Equipment Network infra. Computer/ Data storage & office related items Data center establishment with NoC 24/7 IT services model PBX voice Network and Biometric system Access setup
Task-VII: Providing Top Supervision during Construction a. Visit to site of work by Consultants’ professional in Foundation Checking, at Plinth Level, at Roof slab pouring, during plastering/ flooring stage, on completion of work and as and when needed by the Client if any clarification is required on site of work. b. Providing additional details and drawings during construction phase where necessary
c. Interpreting and clarifying the existing details/ specifications, contract conditions, analyzing and recommending rate for any non-contract item d. Assisting the Client in resolving any dispute arising out or related to the construction contract document prepared by the Consultants Task-VIII: Providing Detail Supervision during Construction
Additional Responsibilities a. Consultants will assume complete and undivided responsibility for the technical viability/ adequacy of the scheme/ schemes, structural soundness of the buildings and the capacity/ design and layout of all the internal and external utilities b. Consultants shall work out and ensure correctness of the quantities to be exhibited in the BoQ/ Tender Documents to an accuracy of +5%.
c. The Consultants shall conform all their drawings/ designs as per the Govt./ CDA bye-laws and Building Codes. d. The Consultants shall affirm and guarantee that they are skilled and fully qualified and that they shall make use of all such skills and qualification in the best professional standards and skills. e. The Consultants shall be fully responsible for the correctness and suitability of their design and the safety of the structure and services built according to their design and specific
Number of GC Clause 24.1
The insurance coverage against the risks shall be as follows:
(a) Professional liability insurance, with a minimum coverage of ______________________ [insert amount and currency which should be not less than the total ceiling amount of the Contract];
Number of GC Clause 33. Removal of Experts or Sub-consultants
[Note to Procuring Agency: include the following for supervision of infrastructure contracts (such as Plant or Works) and for other consulting service where the social risks are substantial or high, otherwise delete.]
Price adjustment on the remuneration …………….. [insert “applies” or “ does not apply”]
[If the Contract is less than 18 months, price adjustment does not apply.
If the Contract has duration of more than 18 months, a price adjustment provision on the remuneration for foreign and/or local inflation shall be included here. The adjustment should be made every 12 months after the date of the contract for remuneration in foreign currency and – except if there is very high inflation in the Procuring Agency’s country, in which case more frequent adjustments should be provided for – at the same intervals for remuneration in local currency. Remuneration in foreign currency should be adjusted by using the relevant index for salaries in the country of the respective foreign currency (which normally is the country of the Consultant) and remuneration in local currency by using the corresponding index for the Procuring Agency’s country. A sample provision is provided below for guidance:
Payments for remuneration made in [foreign and/or local] currency shall be adjusted as follows:
{or }
where
Rf is the adjusted remuneration;
Rfo is the remuneration payable on the basis of the remuneration rates (Appendix C) in foreign currency;
If is the official index for salaries in the country of the foreign currency for the first month for which the adjustment is supposed to have effect; and
Ifo is the official index for salaries in the country of the foreign currency for the month of the date of the Contract.
{or }
where
Rl is the adjusted remuneration;
Rlo is the remuneration payable on the basis of the remuneration rates (Appendix D) in local currency;
Il is the official index for salaries in the Procuring Agency’s country for the first month for which the adjustment is to have effect; and
Ilo is the official index for salaries in the Procuring Agency’s country for the month of the date of the Contract.
The currency of payment shall be the following: PKR
[The advance payment could be in either the foreign currency, or the local currency, or both; select the correct wording in the Clause here below. The advance bank payment guarantee should be in the same currency(ies)]
The following provisions shall apply to the advance payment and the advance bank payment guarantee:
Following is the guidance for Dispute Resolution
Notwithstanding any reference to the arbitration herein, the parties shall continue to perform their respective obligations under the Contract unless they otherwise agree that the Authority shall pay the Bidder any monies due to the Bidder.
Arbitrator’s fee:
The fee shall be specified in Pak Rupees, as determined by the Arbitrator, which shall be shared equally by both parties.
Appointing Authority for Arbitrator:
By the Mutual Consent or in accordance with the provisions of Arbitration Act, 1940, in case the parties fail to reach a consensus on the name of sole arbitrator, any party may submit an application to the Chief Justice Islamabad High Court for appointment of sole arbitrator. The Chief Justice IHC may appoint a former judge of any High Court or Supreme Court as the sole arbitrator to resolve the dispute between the parties.
Rules of procedure for arbitration proceedings:
Any dispute between the Authority and a Bidder who is a national of the Islamic Republic of Pakistan arising in connection with the present Contract shall be referred to adjudication or arbitration in accordance with the laws of the Islamic Republic of Pakistan including Arbitration Act 1940, however above provision shall prevail in referring the case to the Arbitrator.
Place of Arbitration and Award:
The arbitration shall be conducted in English language and place of arbitration shall be at Islamabad. The award of the arbitrator shall be final and shall be binding on the parties.
Date: [insert date (as day, month and year)]
Bid No.:P53366
To: Quaid-e-Azam University Islamabad. (Ministry of Federal Education and Professional Training), Purchase Officer Quaid-e-Azam University, Islamabad., Islamabad Capital Territory
We, the undersigned, declare that:
We understand that, according to your conditions, Bids must be supported by a Bid Securing Declaration.
We accept that we will be blacklisted and henceforth cross debarred for participating in respective category of public procurement proceedings for a period of (not more than) six months, if fail to abide with a bid securing declaration, however without indulging in corrupt and fraudulent practices, if we are in breach of our obligation(s) under the Bid conditions, because we:
We understand this Bid Securing Declaration shall expire if we are not the successful
Bidder, upon the earlier of (i) our receipt of your notification to us of the name of the successful Bidder; or (ii) twenty-eight (28) days after the expiration of our Bid.
This CONTRACT (hereinafter called the “Contract”) is made the [number] day of the month of [month], [year], between, on the one hand, [name of Procuring Agency or Recipient] (hereinafter called the “Procuring Agency”) and, on the other hand, [name of Consultant] (hereinafter called the “Consultant”).
[If the Consultant consist of more than one entity, the above should be partially amended to read as follows: “…(hereinafter called the “Procuring Agency”) and, on the other hand, a Joint Venture consisting of the following entities, each member of which will be jointly and severally liable to the Procuring Agency for all the Consultant’s obligations under this Contract, namely, [name of member] and [name of member] (hereinafter called the “Consultant”).]
WHEREAS
NOW THEREFORE the parties hereto hereby agree as follows:
The following documents attached hereto shall be deemed to form an integral part of this Contract:
In the event of any inconsistency between the documents, the following order of precedence shall prevail: the Special Conditions of Contract; the General Conditions of Contract, including Attachment 1; Appendix A; Appendix B; Appendix C and Appendix D; and Appendix E. Any reference to this Contract shall include, where the context permits, a reference to its Appendices.
2. The mutual rights and obligations of the Procuring Agency and the Consultant shall be as set forth in the Contract, in particular:
(a) the Consultant shall carry out the Services in accordance with the provisions of the Contract; and
(b) the Procuring Agency shall make payments to the Consultant in accordance with the provisions of the Contract.
IN WITNESS WHEREOF, the Parties hereto have caused this Contract to be signed in their respective names as of the day and year first above written.
For and on behalf of [Name of Procuring Agency]
[Authorized Representative of the Procuring Agency – name, title and signature]
For and on behalf of [Name of Consultant or Name of a Joint Venture]
[Authorized Representative of the Consultant – name and signature]
[For a joint venture, either all members shall sign or only the lead member, in which case the power of attorney to sign on behalf of all members shall be attached.]
For and on behalf of each of the members of the Consultant [insert the name of the Joint Venture]
[Name of the lead member]
[Authorized Representative on behalf of a Joint Venture]
[add signature blocks for each member if all are signing]
Contract Number: Contract Value: Contract Title:
Dated:
[Name of Supplier] hereby declares that it has not obtained or induced the procurement of any contract, right, interest, privilege or other obligation or benefit from Government of Pakistan or any administrative subdivision or agency thereof or any other entity owned or controlled by it (GoP) through any corrupt business practice.
Without limiting the generality of the foregoing [Name of Supplier] represents and warrants that it has fully declared the brokerage, commission, fee etc. paid or payable to anyone and not given or agreed to give and shall not give or agree to give to anyone within or outside Pakistan either directly or indirectly through any natural or juridical person, including its affiliate, agent, associate, broker, consultant, director, promoter, shareholder, sponsor or subsidiary, any commission, gratification, bribe, finder's fee or kickback, whether described as consultations fee or otherwise, with the object of obtaining or inducing the procurement of a contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP, except that which has been expressly declared pursuant hereto.
[Name of Supplier] certifies that it has made and will make full disclosure of all agreements and arrangements with all persons in respect of or related to the transaction with GoP and has not taken any action or will not take any action to circumvent the above declaration, representative or warranty.
[Name of Supplier] accepts full responsibility and strict liability for making and false declaration, not making full disclosure, misrepresenting fact or taking any action likely to defeat the purpose of this declaration, representation and warranty. It agrees that any contract, right interest, privilege or other obligation or benefit obtained or procured as aforesaid shall, without prejudice to any other right and remedies available to GoP under any law, contract or other instrument, be voidable at the option of GoP.
Notwithstanding any rights and remedies exercised by GoP in this regard, [Name of Supplier] agrees to indemnify GoP for any loss or damage incurred by it on account of its corrupt business practices and further pay compensation to GoP in an amount equivalent to ten time the sum of any commission, gratification, bribe, finder's fee or kickback given by [Name of Supplier] as aforesaid for the purpose of obtaining or inducing the procurement of any contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP.
To: Quaid-e-Azam University Islamabad. (Ministry of Federal Education and Professional Training), Purchase Officer Quaid-e-Azam University, Islamabad., Islamabad Capital Territory
WHEREAS [name of Bidder] (hereinafter called “the Bidder”) has undertaken, in pursuance of Contract No. [reference number of the contract] dated [insert date] for provision of Goods(hereinafter called “the Contract”).
AND WHEREAS it has been stipulated by you in the said Contract that the Bidder shall furnish you with a Bank Guarantee by a reputable bank for the sum specified therein as security for compliance with the Bidder’s performance obligations in accordance with the Contract.
AND WHEREAS we have agreed to give the Bidders guarantee:
THEREFORE, WE hereby affirm that we are Guarantors and responsible to you, on behalf of the Bidder, up to a total of [amount of the guarantee in words and figures], and we undertake to pay you, upon your first written demand declaring the Bidder to be in default under the Contract and without cavil or argument, any sum or sums within the limits of [amount of guarantee] as aforesaid, without your needing to prove or to show grounds or reasons for your demand or the sum specified therein.
This guarantee is valid until the: [insert date]
Signature and seal of the Guarantors
_____________________________________________________________________
[name of bank or financial institution]
_____________________________________________________________________
[address]
_____________________________________________________________________
[date}