Standard Bidding Document

📑 Procurement Notice (NIT)

Purchase of Civil Items etc. for Maintenance Sub Division of NIH

Published on: Wednesday, October 21, 2026 09:50 AM

Ref# : P152517
QR Code

REQUEST FOR BIDS

PROCUREMENT OF GOODS

  1. The National Institutes of Health (NIH) (National Institutes of Health (NIH)) has reserved Funds for the procurement planned for FY 2026-27. The National Institutes of Health (NIH) (National Institutes of Health (NIH)) intends to apply part of the proceeds of this Fund to cover eligible payments under the contract for the "Purchase of Civil Items etc. for Maintenance Sub Division of NIH" with the reference of "P152517"
  2. The National Institutes of Health (NIH) (National Institutes of Health (NIH)) invites sealed Bids from eligible Bidders for procurement of goods described in the bidding documents on EPADS v2.0.
  3. Single Stage-One Envelope will be used by adopting Least Cost Based Selection (LCBS) Technique for the subject procurement, in line with the Public Procurement Rules, 2026 and any Regulations, Regulatory Guides, Procurement Guidelines or Instructions issued by the Authority from time to time.
  4. All Bids must be accompanied by a Bid Security amount described in Bid Security Section in Bidding Document in the form of  Pay Order, Call at Deposit, Demand Draft or all bids must be accompanied by bid securing declaration in the format specified in the Bidding documents
  5. E-Bidding documents, containing detailed terms & conditions, specifications and requirements etc. are available on e-Pak Acquisition and Disposal System (EPADS) at https://epads.gov.pk/opportunities/federal/procurements/152517 for all the interested bidders registered on EPADS v2.0. Bidders are required to get themselves registered on EPADS v2.0 to participate in Bidding process.
  6. The e-bids, prepared in accordance with the instructions in the e-Bidding Documents, must be submitted through EPADS v2.0 on or before Tuesday, November 3, 2026 11:00 AM. E-bids will be opened using EPADS v2.0 on the same day at Tuesday, November 3, 2026 11:30 AM. Manual submission of Bids shall not be entertained. Those vendors who have not yet registered on the new version of EPADS v2.0, may register themselves on https://vendors.epads.gov.pk/. A tutorial to explain the registration process is available at https://www.youtube.com/watch?v=MNW6T38v7tc

In terms of Rule 65 of Public Procurement Rules, 2026 Grievance Redressal Committee (GRC) is notified for the subject procurement and notification copy is available on the procuring agency’s website and on Authority’s website at (www.ppra.gov.pk).

 

 

National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director
Park Road, Islamabad Capital Territory
+92-333-855-4884
purchaseprocurement58@gmail.com

📑 Instructions to Bidders (ITB)

Purchase of Civil Items etc. for Maintenance Sub Division of NIH

Published on: Wednesday, October 21, 2026 09:50 AM

Ref# : P152517
QR Code

A. Introduction

1.Scope of Bids

1.1 The Procuring Agency (PA), as indicated in the Bids Data Sheet (BDS) invites Bids through EPADS v2.0 for the provision of Goods as specified in the BDS and in Section V – Evaluation Criteria, Specifications & Schedule of Requirements. The name, identification, and number of items/deliverables are provided in the BDS. The successful Bidders will be expected to provide the goods within the specified period and timeline(s) as stated in the BDS.

2. Source of Funds

2.1 Source of funds is referred in Clause-2 I of Invitation for Bids.

3. Eligible Bidders

3.1 A Bidder may be natural person, company or firm or public or semi-public agency of Pakistan or any foreign country, or any combination of them with a formal existing agreement (on Judicial Papers) in the form of a joint venture, consortium, or association. In the case of a joint venture, consortium, or association, all members shall be jointly and severally liable for the execution of the Contract in accordance with the terms and conditions of the Contract. The joint venture, consortium, or association shall nominate a Lead Member as nominated in the BDS, who shall have the authority to conduct all business for and on behalf of any and all the members of the joint venture, consortium, or association during the Bidding process, and in case of award of contract, during the execution of the contract.

Verifiable copy of the agreement that forms a joint venture, consortium or association shall be required to be submitted as part of the Bid.

The appointment of Lead Member in the joint venture, consortium, or association shall be confirmed by submission of a valid Power of Attorney to the Procuring Agency.

Any bid submitted by the joint venture, consortium or association shall indicate the part of proposed contract to be performed by each party and each party shall be evaluated (or post qualified if required) with respect to its contribution only, and the responsibilities of each party shall not be substantially altered without prior written approval of the Procuring Agency and in line with any instructions issued by the Authority.

(The limit on the number of members of JV or Consortium or Association may be prescribed in BDS, in accordance with the guidelines issued by the PPRA).

3.2 The invitation for Bids is open to all prospective suppliers, manufacturers, or authorized agents / dealers subject to any provisions of incorporation or licensing by the respective national incorporating agency or statutory body established for that particular trade or business. Procuring agencies shall specify the registration/licensing requirements for the foreign bidders keeping in view the requirement of that business.

3.3 A Bidder shall not have a conflict of interest. All Bidders found to have a conflict of interest shall be disqualified. A Bidder may be considered to have a conflict of interest with one or more parties in this Bidding process, if they:

  1. are associated or have been associated in the past, directly or indirectly with a firm or any of its affiliates which have been engaged by the Procuring Agency to provide consulting services for the preparation of the design, specifications and other documents to be used for the procurement of the Goods to be purchased under this Invitation for Bids.
  2. have controlling shareholders in common; or
  3. receive or have received any direct or indirect subsidy from any of them; or
  4. have the same legal representative for purposes of this Bid; or
  5. have a relationship with each other, directly or through common third parties, that puts them in a position to have access to information about or influence on the Bids of another Bidder, or influence the decisions of the Procuring Agency regarding this Bidding process; or     
  6. Submit more than one Bid in this Bidding process.

3.4 A Bidder may be ineligible if –

  1. he is declared bankrupt or, in the case of company or firm, insolvent;
  2. payments in favor of the Bidder is suspended in accordance with the judgment of a court of law other than a judgment declaring bankruptcy and resulting (in accordance with the national laws) in the total or partial loss of the right to administer and dispose of its property;
  3. the Bidder is convicted, by a final judgment, of any offence involving professional conduct;
  4. the Bidder is blacklisted locally or by international organizations and hence debarred due to involvement in corrupt and fraudulent practices, or submission of false or misleading information or performance failure or involved in disrupting procurement process or due to breach of bid Securing Declaration.

3.5 As and when required, bidders shall provide to the Procuring Agency evidence of their eligibility, proof of compliance with the necessary legal requirements to carry out the contract effectively.

3.6 Bidders shall submit Bids relating to the nature, conditions and modalities of sub-contracting wherever the sub-contracting of any elements of the contract amounting to more than ten (10) percent of the Bid price is envisaged.

4. Eligible Goods and Related Services

4.1 All goods and related services to be supplied under the contract shall have their origin in eligible source countries, and all expenditures made under the contract will be limited to such goods and services. For purpose of this Bid, ineligible countries are the countries declared ineligible by the Federal Government. 

5. One Bid per Bidder

5.1 A bidder shall submit only one Bid, in the same bidding process, either individually as a Bidder or as a member in a joint venture or any similar arrangement.

5.2 The Bidder shall not engage a subcontractor for any portion of the contract if the value of such subcontracting exceeds thirty percent (30%) of the total contract amount.

6. Cost of Bidding

6.1 Any cost incurred by the bidder relating to the preparation and submission of its Bid shall be borne by the bidder, and the Procuring Agency shall in no case be responsible or liable for those costs, regardless of the conduct or outcome of the bidding process.

B. Bidding Documents

7. Contents of  Bidding Document

7.1 The Goods required, Bidding procedures, and terms and conditions of the contract are prescribed in the Bidding Documents.  In addition to the Invitation for Bids, the Bidding documents which should be read in conjunction with any addenda issued in accordance with ITB 10.1 include:

Section I -Invitation to Bids

Section II Instructions to Bidders (ITB)

Section III Bid Data Sheet (BDS)

Section IV Evaluation Criteria, Specifications, Schedule of Requirements

Section V Bid Forms

Section VI General Conditions of Contract (GCC)

Section VII Special Conditions of Contract (SCC)

Section VIII Contract Forms

Section IX Integrity Pact

Section X Declaration of Beneficial Ownership Information.

7.2 The Bidder is expected to examine all instructions, forms, terms and specifications in the Bidding documents. Failure to furnish all the information required in the Bidding documents through EPADS v2.0 will be at the Bidder’s risk and may result in the rejection of its Bids.

8. Clarification of Bidding documents

8.1 A prospective Bidder requiring any clarification of the Bidding documents may notify the Procuring Agency through EPADS v2.0.

8.2 The Procuring Agency will within two (02) working days after receiving the request for clarification, respond to any request for clarification through EPADS v2.0 provided that such request is received not later than three (03) days, prior to the deadline for the submission of Bids as prescribed in ITB 22

8.3 The Procuring Agency's response will be forwarded to all identified Prospective Bidders through EPADS v2.0, including a description of the inquiry, but without identifying its source.

8.4 Should the Procuring Agency deem it necessary to amend the Bidding document as a result of a clarification, it shall do so following the procedure under ITB 9.

8.5 If indicated in the BDS, the Bidder’s designated representative is invited at the Bidder’s cost to attend a pre-Bid meeting at the place, date and time mentioned in the BDS. During this pre-Bid meeting, prospective Bidders may request clarification of the schedule of requirement, the Evaluation Criteria or any other aspects of the Bidding document.

8.6 Minutes of the pre-Bid meeting, if applicable, including the text of the questions asked by Bidders, including those during the meeting (without identifying the source) and the responses given, together with any responses prepared after the meeting will be uploaded on EPADS v2.0. Any modification to the Bidding documents that may become necessary as a result of the pre-Bid meeting shall be made by the Procuring Agency exclusively through the use of an Addendum pursuant to ITB 9. Non-attendance at the pre-Bid meeting will not be a cause for disqualification of a Bidder.

9. Amendment of Bidding documents

9.1 Before the deadline for submission of Bids, the Procuring Agency for any reason, whether at its own initiative or in response to a clarification requested by a prospective Bidder or Pre-Bid meeting may modify the Bidding documents by issuing addenda through EPADS v2.0.

9.2 The Procuring Agency shall promptly publish the addendum through EPADS v2.0.

Any addendum issued including the notice of any extension of the deadline shall also be communicated through EPADS v2.0 to all the bidders who have already submitted their bids. Such bidders shall have the right to withdraw their already submitted bid and re-submit the revised bid prior to the original or extended bid submission deadline.

9.3 To give prospective Bidders reasonable time in which to take an addendum/corrigendum into account in preparing their Bids, the Procuring Agency may, at its discretion, extend the deadline for the submission of Bids through EPADS v2.0:

Provided that the Procuring Agency shall extend the deadline for submission of Bids, if such an addendum is issued within last three (03) days of the Bids submission deadline.

C. Preparation of Bids

10. Language of Bid

10.1 The Bid prepared by the bidder, as well as all correspondence and documents relating to the Bids exchanged by the Bidder and the Procuring Agency shall be written in the English language unless otherwise specified in the BDS.  Supporting documents and printed literature furnished by the Bidder may be in another language provided they are accompanied by an accurate translation of the relevant pages in the English language unless otherwise specified in the BDS, in which case, for purposes of interpretation of the Bidder, the translation shall govern.

11. Documents and samples Constituting the Bid

11.1 The Bid prepared by the Bidder shall constitute the  documents required in the BDS.

Details of sample(s) where applicable and requested in the BDS.

Documentary evidence established in accordance with ITB 13 that the Bidder is eligible and/or qualified for the subject bidding process;

Documentary evidence established in accordance with ITB  03 that the Bidder has been authorized by the manufacturer to deliver the goods into Pakistan, where required and where the supplier is not the manufacturer of those goods;

Documentary evidence established in accordance with ITB 12 that the goods and related services to be supplied by the Bidder are eligible goods and services, and conform to the Bidding Documents;

Bid security or Bid Securing Declaration furnished in accordance with ITB ---.

12. Documents Establishing Eligibility of the Goods and Conformity to Bidding documents

12.1 To establish the conformity of the bidder to the Bidding document, the Bidder shall furnish as part of its Bids the documentary evidence that Goods provided conform to the technical specifications and standards.

13. Documents Establishing Eligibility and Qualification of the Bidder

13.1 Pursuant to ITB 10, the Bidder shall furnish, as part of its Bid, all those documents establishing the Bidder’s eligibility to participate in the Bidding process and/or its qualification to perform the contract if its Bid is accepted.

14. Form of Bid

14.1 The Bidder shall fill the Form of Bid furnished in the Bidding document. The Bid Form must be completed without any alterations to its format and no substitute shall be accepted.

15. Bid Prices

15.1 The Bid Prices quoted by the Bidder in the Form of Bid and in the Price Schedules shall conform to the requirements specified below or exclusively mentioned hereafter in the Bidding documents.

15.2 All items in the Schedule of Requirement must be listed and priced separately in the Price Schedule(s). If a Price Schedule shows items listed but not priced and neither explicitly denied, their prices shall be construed to be included in the prices of other items.

15.3 In the event that any item(s) in the Price Schedule are not quoted, and such omission is determined by the Procuring Agency not to materially affect the responsiveness of the Bid, the Procuring Agency may, for the sole purpose of bid evaluation and comparison, assign a price to the unquoted item(s) in accordance with the following methodology:

(a) The assigned price shall be the average of the prices quoted for the same item(s) by all substantially responsive bidders; or

(b) In cases where no comparable quotations are available, the Procuring Agency shall apply the corresponding item price from its duly approved cost estimate for evaluation purposes.

The prices so assigned shall be utilized exclusively for bid evaluation and comparison, and shall not, under any circumstances, be incorporated into or form part of the Contract Price.

15.4 The Bid price to be quoted in the Form of Bid in accordance with ITB 13.1 shall be the total price of the Bid.

15.5 The Bidder shall indicate on the appropriate Price Schedule, the unit prices (where applicable) and total Bid price of the Goods it proposes to provide under the contract.

15.6 Prices quoted by the Bidder shall be fixed during the Bidder’s performance of the contract and not subject to variation on any account. A Bid submitted with an adjustable price will be treated as non-responsive and shall be rejected.

16. Bids Currencies

16.1 Prices shall be quoted in Pakistani Rupees unless otherwise specified in the BDS in accordance with Rule 42 (2) of the Public Procurement Rules, 2026.

17. Bids Validity Period

17.1 Such extensions may be more than one time but the total period of such extension shall not exceed the original bid validity period.

17.2 Bids shall remain valid for the period specified in the BDS after the Bid submission deadline prescribed by the Procuring Agency. A Bid valid for a shorter period shall be rejected by the Procuring Agency as non-responsive. The period of Bid validity will be determined from the complementary Bid securing instrument, i.e. the expiry period of Bid Security or Bids Securing Declaration as the case may be.

The procuring agency shall ordinarily be under an obligation to process and evaluate the bid and to issue letter of award within the stipulated bid validity period.

17.3 Under exceptional circumstances, prior to the expiration of the initial Bid validity period, the Procuring Agency may request the Bidders’ consent to an extension of the period of validity of their Bids through EPADS v2.0,. The Bid Security provided under ITB 17 shall also be suitably extended. A Bidder may refuse the request without forfeiting its Bid security or causing to be executed its Bid Securing Declaration.  A Bidder agreeing to the request will not be required nor permitted to modify its Bid, but will be required to extend the validity of its Bid Security or Bid Securing Declaration for the period of the extension.

18. Bid Security or Bid Securing Declaration

18.1 The Bidder shall furnish as part of its Bid, a Bid Security in accordance with Rule 36 of the Public Procurement Rules, 2026.

18.2 The original Bid Security shall be enclosed within the sealed envelope and to be submitted physically before closing time for submission of bids. Whereas, scanned copy of bid security shall be uploaded electronically through EPADS v2.0 before closing hours for submission of bids.

18.3 The Bidder who failed to submit the original Bids security before the submission deadline shall be disqualified straightaway. 

18.4 The Bid Security or Bid Securing Declaration is required to protect the Procuring Agency against the risk of Bidder’s conduct which would warrant the security’s forfeiture, pursuant to ITB 18.7.

18.5 The Bid Security shall be denominated in the local currency or in another freely convertible currency, and it shall be in the form specified in the BDS which shall be in any of the following:

a) a bank guarantee, a bank draft, an irrevocable letter of credit issued by a Scheduled bank in the form provided in the Bidding Documents or another form acceptable to the Procuring Agency;

b) a cashier’s or certified cheque; or

c) another security if indicated in the BDS.

The Bid Security shall be valid for twenty-eight (28) days beyond the end of the validity of the Bid. This shall also apply if the period for Bid Validity is extended. In either case, the form must include the complete name of the Bidder.

18.6 The Bid Security shall be payable promptly upon written demand by the Procuring Agency in case any of the conditions listed in ITB 18.7 are invoked.

18.7 Unsuccessful Bidders' Bid Security will be discharged or returned as promptly as possible, however in no case later than thirty (30) days after the expiration of the period of Bid Validity prescribed by the procuring agency pursuant to ITB 17. The Procuring Agency shall make no claim to the amount of the Bid Security, and shall promptly return the Bid Security documents, after whichever of the following that occurs earliest:

  1. the expiry of the Bid Security;
  2. the entry into force of a procurement contract and the provision of a Performance Guarantee, for the performance of the contract if such a guarantee, is required by the Bid documents;
  3. the rejection by the Procuring Agency of all Bids;
  4.  cancellation of procurement proceedings.
  5. the withdrawal of the Bid prior to the deadline for the submission of Bids, unless the Bid document stipulates that no such withdrawal is permitted.

18.8 The successful Bidder’s Bid Security will be discharged upon the Bidder signing the contract, or furnishing the Performance Guarantee.

18.9 The Bid Security may be forfeited or the Bid Securing Declaration executed:

  1.  if a Bidder:
  2. withdraws its Bid during the period of Bid Validity as specified by the Procuring Agency, and referred by the Bidder on the Form of Bids except as provided for in ITB 16.2; or
  3. does not accept the correction of errors; or
  4. in the case of a successful Bidder, if the Bidder fails:
  5. to sign the contract; or
  6. to furnish Performance Guarantee.

19. Withdrawal, Substitution, and Modification of Bid

19.1 Before Bid submission deadline, any Bidder may withdraw, substitute, or modify its Bid after it has been submitted through EPADS v2.0. 

20. Format and Signing of Bid

20.1 The Bidder shall prepare and submit Bids with due diligence after carefully reading all the terms and condition before bid submission deadline through EPADS v2.0.

D. Submission of Bids

21. Submission of Bids through EPADS v2.0 before bid submission deadline.

21.1 The Technical and Financial Bids, shall be submitted electronically through EPADS, before bid submission deadline. The bid submission option shall be automatically disabled once the deadline is over.

22. Deadline for Submission of Bids

22.1 Bids shall be received by the Procuring Agency through EPADS v2.0 before bid submission deadline.

22.2 The Procuring Agency may, under exceptional circumstances, extend the deadline for the submission of Bids, after recording reasons in writing and in an equal opportunity manner.   

In such case, all rights and obligations of the Procuring Agency and the Bidders that were previously governed by the original deadline shall thereafter be subject to the revised deadline.

E. Opening and Evaluation of Bids

23. Opening of Bids

23.1 The respective Bid Evaluation Committee of the Procuring Agency shall open all Bids through the EPADS v2.0, on the date and time specified in the Bid Data Sheet (BDS).

23.2 The respective Bid Evaluation Committee shall generate minutes through EPADS v2.0 containing brief details of bid opening process. The record of the Bid opening shall include, as a minimum: the name of the Bidder, the Bid price if applicable, and the presence or absence of a Bid Security or Bid Securing Declaration.

23.3 The procuring agency shall live broadcast the opening of bids on national media or on their website or digital channels, if the volume of procurement exceeds five hundred million rupees in case of goods and services and one thousand million rupees in case of works.

23.4 In case the date of opening of bid has been declared as public holiday or the procuring agency fails to open bid due to any EPADS v2.0 related issues, the submission and opening of bids shall be shifted to the next working day at the same time.

23.5 In case of Single Stage One Envelope Procedure, the Bidders names, the Bid prices, the total amount of each Bid and, the presence or absence of Bid Security, Bid Securing Declaration and such other details as the Procuring Agency may consider appropriate, will be announced by the Bid respective Evaluation Committee.

23.6 No bid will be rejected at the time of bid openning except for bids whose original bid security has not been provided to the procuring agency before bid submission deadline.

24. Clarification of Bids

24.1 To assist in the examination, evaluation and comparison of Bids of the Bidders, the respective Bid Evaluation Committee may, ask any Bidder for a clarification of its Bid including breakdown of prices.   

24.2 The request for clarification and the response shall be sought through EPADS v2.0 before three days prior to the deadline for submission of bids. No change in the prices or substance of the Bids shall be sought, offered, or permitted.

24.3 The alteration or modification in the bids which in any way affect the following parameters will be considered as a change in the substance of a Bid:

  1. evaluation & qualification criteria;
  2. required scope of work or specifications;
  3. all securities requirements;
  4. tax requirements;
  5. terms and conditions of Bidding documents.
  6. change in the ranking of the Bidder

24.4 From the time of bid(s) opening to the time of Contract award if any Bidder wishes to contact the Procuring Agency on any matter related to the Bids it should do so through EPADS v2.0.

25. Preliminary Examination of Bids

25.1 Prior to the detailed evaluation of Bids, the respective Bid Evaluation Committee will determine whether each Bid:

  1. meets the eligibility criteria defined in ITB 3;
  2. has been prepared as per the format and contents defined by the Procuring Agency in the Bidding documents;
  3. is accompanied by the required securities; and
  4. is substantially responsive to the requirements of the Bidding documents.

25.2 The respective Bid Evaluation Committee's determination of a Bid's responsiveness will be based on the contents of the Bid itself.

25.3 A substantially responsive Bid is one which conforms to all the terms, conditions, and specifications of the Bidding documents, without material deviation or reservation. A material deviation or reservation is one that: -

  1. affects in any substantial way the scope, quality, or performance of the Goods;
  2. limits in any substantial way, inconsistent with the Bidding documents, the Procuring Agency's rights or the Bidders obligations under the Contract; or
  3. if rectified, would affect unfairly the competitive position of other Bidders presenting substantially responsive Bids.

25.4 If a Bid is not substantially responsive, it will be rejected by the respective Bid Evaluation Committee and may not subsequently be evaluated for complete technical responsiveness.

26. Examination of Terms and Conditions; Technical Evaluation

26.1 The respective Bid Evaluation Committee shall examine the Bids to confirm that all terms and conditions specified in the GCC and the SCC have been accepted by the Bidder without any material deviation or reservation.

26.2 The respective Bid Evaluation Committee shall evaluate the technical aspects of the Bids submitted, to confirm that all requirements specified in Schedule of Requirements and Technical Specifications of the Bidding documents have been met without material deviation or reservation.

26.3 If after the examination of the terms and conditions and the technical evaluation, the respective Bid Evaluation Committee determines that the Bid is not substantially responsive in accordance with ITB, it shall reject the Bid.

27. Correction of Errors

27.1 Bids determined to be substantially responsive will be checked for any arithmetic errors.  Errors will be corrected as follows: -

  1. if there is a discrepancy between unit price and the total price that is obtained by multiplying the unit price and quantity, the unit price shall prevail, and the total price shall be corrected, unless in the opinion of the respective Evaluation Committee there is an obvious misplacement of the decimal point in the unit price, in which the total price as quoted shall govern and the unit price shall be corrected;
  2. if there is an error in a total corresponding to the addition or subtraction of sub-totals, the sub-totals shall prevail and the total shall be corrected; and
  3. where there is a discrepancy between the amounts in figures and in words, the amount in words will govern.
  4. Where there is discrepancy between grand total of price schedule and amount mentioned on the Form of Bid, the amount referred in Price Schedule shall be treated as correct subject to elimination of other errors.

27.2 The amount stated in the Bid will be adjusted by the respective Bid Evaluation Committee in accordance with the above procedure for the correction of errors and, with the concurrence of the Bidder, shall be considered as binding upon the Bidder. If the Bidder does not accept the corrected amount, its Bid will then be rejected, and the Bid Security may be forfeited or the Bids Securing Declaration may be executed.

28. Conversion to Single Currency

28.1 For the purposes of comparison of bids quoted in different currencies, the price shall be converted into a single currency in accordance with Rule 42(2) of Public Procurement Rules,2026.

29. Evaluation of Bids

29.1 The Bids, quotations, or proposals shall be evaluated by the respective evaluation committees as per evaluation criteria prescribed in the Bidding Documents in accordance with Rule 11, 12 and 13 of the Public Procurement Rules, 2026.

29.2 While evaluating the bids, the procuring agency shall consider the following:

i. Bids will be evaluated on lump sum bid basis or items wise or Lot wise (contracts), as specified in the BDS; and the Bid Price;

ii. correction of arithmetic errors in accordance with ITB 27;

30. Domestic Preference

30.1 The respective Bid Evaluation Committee shall evaluate and compare bids, allow for preference to domestic bidders, while competing with the international bidders in accordance with the policies of the Federal Government.

The percentage of preference, to be accorded shall be clearly mentioned in the bidding documents under the bid evaluation criteria.

31. Determination of Successful Bid

31.1 Selection technique will be adopted for determining the Successful Bid in accordance with the criteria referred in the BDS or prescribed in the separate section titled as Evaluation Criteria.

31.2 Least Cost Based Selection (LCBS)
After meeting the requirements of eligibility, qualification and substantial responsiveness, the bid in compliance with all the mandatory (technical) specifications/requirements and/or requisite quality threshold (if any), and having lowest evaluated cost (or financial proposal) shall be considered Successful Bid.

31.3 Quality and Cost Based Selection (QCBS)
In such combination, there shall be some specific weightage of both the technical features and financial aspects of the proposal. The financial marks shall be awarded on the basis of inverse proportion calculations. The successful bid shall be declared, on the basis of combined evaluation.

31.4 Quality Based Selection (QBS)
After meeting the requirements of eligibility, qualification and substantial responsiveness the bid in compliance with all the mandatory (technical) specifications/requirements and attaining highest marks in the Technical Evaluation considering all other qualitative and/or quantitative parameters (or point rated criteria) for technical proposal(s) such as working methodology, implementation plan, resource allocation, additional functionalities, risk management approach, knowledge transfer techniques, post implementation methodology etc. shall be treated as highest ranked bid. Later on, the financial proposal of highest ranked bidder shall be opened, however, in case of failure to proceed further with such a bidder, the procuring agency may resort to second highest bidder and so on.

31.5 The Procuring Agency may adopt the Quality & Cost Based Selection Technique due to the following two reasons:

1. Where the Procuring Agency knows about the main features, usage and output of the products; however not clear about the complete features, technical specifications and functionalities of the goods to be procured and requires the bidders to submit their proposals defining those features, specifications and functionalities; or

2. Where the Procuring Agency, in addition to the mandatory requirements and mandatory technical specifications, requires parameters specified in Evaluation Criteria to be evaluated while determining the quality of the goods.

31.6 In such cases, the Procuring Agency may allocate certain weightage to these factors as a part of Evaluation Criteria, and may determine the ranking of the bidders on the basis of combined evaluation in accordance with provisions of Rule 2(1)(xxviii) of the Public Procurement Rules, 2026.

32. Abnormally Low Financial Bids

32.1 An abnormally low bid is a bid that, in light of the Procuring Agency's cost estimate, market conditions, or other received bids, appears to be unrealistically low and may not be sustainable for successfull contract execution.

32.2 Where the Bid price is considered to be abnormally low, the Procuring Agency shall perform price analysis either during determination of Successful Bids or as a part of the post-qualification process.

32.3 The Procuring Agency may reject an Abnormally low financial bid in accordance with Rule 43 of the Public Procurement Rules, 2026.

32.4 In order to identify the Abnormally Low Bids (ALB) following approaches can be considered to minimize the scope of subjectivity:

  1. Comparing the Bid price with the cost estimate;
  2. Comparing the Bid price with the Bid(s) offered by other Bidders submitting substantially responsive Bids; and
  3. Comparing the Bids price with prices paid in similar contracts in the recent past either government- or development partner-funded.

32.5 The respective Bid Evaluation Committee will determine to its satisfaction whether the Bidder that is selected as having submitted the successful bid is qualified to perform the contract satisfactorily.

32.6 The determination will take into account the Bidder’s financial, technical, and production capabilities.  It will be based upon an examination of the documentary evidence of the Bidder’s qualifications submitted by the Bidder, as well as such other information as the Procuring Agency deems necessary and appropriate. Factors not included in these Bidding documents shall not be used in the evaluation of the Bidders’ qualifications.

32.7 Respective Bid Evaluation Committee may seek “Certificate for Independent Price Determination” from the Bidder and the results of reference checks may be used in determining an award of contract.

Explanation: The Certificate shall be furnished by the Bidder. The Bidder shall certify that the price is determined keeping in view of all the essential aspects such as raw material, its processing, value addition, optimization of resources due to economy of scale, transportation, insurance and margin of profit etc.

32.8 An affirmative determination will be a prerequisite for award of the contract to the Bidder. A negative determination will result in rejection of the Bidder’s Bid, in which event the respective Bid Evaluation Committee will proceed to the next ranked Bidder to make a similar determination of that Bidder’s capabilities to perform satisfactorily.

F. Award of Contract

33. Criteria of Award

33.1 The Procuring Agency will award the Contract to the Bidder whose Bids has been determined to be substantially responsive to the Bidding documents and who has been declared as Successful Bidder.

34. Negotiations

34.1  In accordance with Rule 52A of Public Procurement Rules, 2026, without changing the cost and scope of work or services, the procuring agency may negotiate with the successful bidder (with a view to streamline the work or task execution, at the time of contract finalization) on methodology, work plan, staffing and special conditions of the contract.

There shall be no limitation on the successful bidder offering voluntary reduction in bid price without affecting the quality or scope of the procurement.

35. Procuring Agency's Right to reject all bids

35.1 The Procuring Agency reserves the right to reject all bids or proposals at any time prior to the issuance of the Letter of Award, without incurring any liability, in accordance with Rule 45 of the Public Procurement Rules, 2026.

36. Cancellation of Procurement

36.1 The procuring agency reserves the right to cancel the procurement proceedings in accordance with Rule 46 of the Public Procurement Rules, 2026.

37. Procuring Agency’s Right to Vary Quantities at the Time of Award

37.1 The Procuring Agency reserves the right at the time of contract award to increase or decrease the quantity of Goods originally specified in these Bidding documents provided this does not exceed by 15%, without any change in unit price or other terms and conditions of the Bids and Bidding documents.

38. Notification of Award

38.1 Prior to the award of contract, the procuring agency shall announce and publish the result of bid evaluation on EPADS v2.0 in accordance with Rule 48 of the Public Procurement Rules, 2026.

The Bidder whose Bids has been accepted will be notified of the award by the Procuring Agency prior to expiration of the Bids/Bid Validity period. The Letter of Award will state the sum that the Procuring Agency will pay the successful Bidder in consideration for the delivery of Goods as prescribed by the Contract (hereinafter and in the Contract called the "Contract Price).

38.2 The Letter of award will constitute the formation of the Contract, subject to the Bidder furnishing the Performance Guarantee and signing of the contract.

39. Signing of Contract

39.1 Promptly after issuance of Letter of award, Procuring Agency shall send the successful Bidder the draft Contract, incorporating all terms and conditions as agreed by the parties to the contract.

39.2 Immediately after the Redressal of grievance by the GRC (if any), and after fulfillment of all conditions precedent of the Contract Form, the successful Bidder and the Procuring Agency shall sign the Contract. 

40. Corrupt & Fraudulent Practices

40.1 Procuring Agencies (including beneficiaries of Government funded projects and procurement) as well as Bidders/Contractors under Government financed contracts, observe the highest standard of ethics during the procurement and execution of such contracts, and will avoid engaging in any corrupt and fraudulent practices. 

F. Grievance Redressal & Complaint Review Mechanism

41. Constitution of Grievance Redressal Committee

41.1 The Grievance Redressal Committee shall address the grievance, if any submitted by any party, including the bidder, in accordance with Rule 65 of the Public Procurement Rules, 2026 read with Redressal of Grievances Regulations, 2021.

In case if any party or the bidder is not satisfied with the decision of the GRC or if it fails to decide within ten days, the bidder or the party may file an appeal before the Appellate Committee of the Authority in accordance with Rule 65(7) of the Public Procurement Rules, 2026 to be read with Redressal of Grievances Regulations, 2021.

G. Mechanism of Blacklisting

42. Mechanism of Blacklisting

42.1 The Procuring Agency shall initiate blacklisting proceedings against any bidder, supplier, or contractor in accordance with the Rule 25 of the Public Procurement Rules, 2026.

42.2 The blacklisted/debarred bidder may file the review petition before the Authority in accordance with Rule 25 (6) of the Public Procurement Rules, 2026 to be read with Procedure of filing and disposal of Review Petitions Regulations, 2021.

43. Contract Management

43.1 For each procurement, the Procuring Agency shall designate a Contract Manager, who shall be duly responsible for the efficient management and administration of the contract in strict compliance with the provisions set forth under Rules 58, 59, and 60 of the Public Procurement Rules, 2026.

44. Inspection of goods and evaluation of services.

44.1 The Inspection Committee or the Firm shall have the right to conduct inspections of the goods in accordance with Rule 61 of the Public Procurement Rules, 2026.

45. Socio-economic development. 

 45.1 In accordance with Rule 63 of the Public Procurement Rules, 2026, preference may be granted to small and medium enterprises and marginalized groups in accordance with the policies notified by the Federal Government.

46. Environmental objectives

46.1 As per Rule 64 of the Public Procurement Rules, 2026, the procuring agency may seek to procure goods with a reduced environmental impact throughout their life cycle when compared to goods services with the same primary function that may otherwise be procured.

📑 Bid Data Sheet (BDS)

Purchase of Civil Items etc. for Maintenance Sub Division of NIH

Published on: Wednesday, October 21, 2026 09:50 AM

Ref# : P152517
QR Code

Bids Data Sheet (BDS)

The following specific data for the procurement of Goods to be procured shall complement, supplement, or amend the provisions in the Instructions to Bidders (ITB).  Whenever there is a conflict, the provisions herein shall prevail over those in ITB.

BDS Clause Number
ITB Number
Amendments of, and Supplements to, Clauses in the Instruction to Bidders

A. Introduction

BDS Clause Number 1
ITB Number 1.1

Name of Procuring Agency: National Institutes of Health (NIH) (National Institutes of Health (NIH))

The subject of procurement is: Purchase of Civil Items etc. for Maintenance Sub Division of NIH

Period for Provision of Goods:

Extension Period (if applicable):

Expected commencement date: Monday, November 30, 2026

BDS Clause Number 2
ITB Number 2.1

Source of funds [Enter source of funds]

Financial year for the operations of the Procuring Agency: 2026-27

Name and identification number of the Contract: P152517 

Identification Number:

BDS Clause Number 3
ITB Clause Number 3.1

Eligible Bidder [Enter eligibility of bidder]

JV/Consortium or Association Allowed: No
Number of JV/Consortium Members: Nil
see section of eligibility criteria.

B. Bidding Documents

BDS Clause Number 4

ITB Clause Number 4.1

Eligible goods and related services [Enter requirements for eligible goods and related services, if any]


ITB Number 8.1

The Bidders may seek clarifications through EPADS v2.0 : Clarification Date: Saturday, October 31, 2026

ITB Number 8.2

The Bidders may seek clarifications through EPADS v2.0 : Clarification Date: Saturday, October 31, 2026

ITB Number 8.3

The Bidders may seek clarifications through EPADS v2.0 : Clarification Date: Saturday, October 31, 2026

ITB Number 8.5

Pre-bid meeting will be/will not be held [Tick the appropriate] If yes write down the time, and date of the pre-Bid meeting:
[The meeting should take place not later than one weeks before the deadline for Bid submission.]

C. Preparation of Bids

BDS Clause Number 5
ITB Number 10.1

The Language of all correspondences and documents related to the Bids shall be in: English 

List of documents required along with the bid: No

BDS Clause Number 6
ITB Number 11.1

Documents required / not required with bid submission [enter list of documents] Samples required / not required with the bid [Enter the names and number of samples]
Items/Lots and their related documents:
See section items and Lots

BDS Clause Number 7
ITB Number 12.1

Items / Lots Specifications:

see section of items specifications.

BDS Clause Number 8
ITB Number 15.6

The price shall be Fixed.

BDS Clause Number 9
ITB Number 16.1

Currency of the Bids shall be : PKR

BDS Clause Number 10
ITB Number 17.1

The Bids/Bid Validity period shall be: 120 Days

BDS Clause Number 11
ITB Number 18.1

The amount of Bid Security shall be as defined in Bid Security Section for items and lots given in BDS 6
Instrument of Bid Security shall be in the Name of : Executive Director, National Institutes of Health (NIH)
The Bid Security shall be in the form of: Pay Order, Call at Deposit, Demand Draft  

ITB Number 18.2

The address for submission of original bid security is [ Insert the address for bid security submission]

D. Submission of Bids

BDS Clause Number 12
ITB Number 20.1

Bid shall be submitted online on EPADS v2.0 whereas hard copy of the bid security should be submitted to the following;

Park Road, Islamabad Capital Territory before bid submission deadline.

Bids that are not submitted on EPADS v2.0 shall be disqualified.

The deadline for Bids submission is: Tuesday, November 3, 2026 11:00 AM

Day : Tuesday

Date: Tuesday, November 3, 2026

Time : 11:30 AM

E. Opening and Evaluation of Bids

BDS Clause Number 13
ITB Number 23.1

The Bids opening shall take place on EPADS v2.0.

Day : Tuesday

Date: Tuesday, November 3, 2026

Time : 11:30 AM

ITB Number 29.2

The procuring agency shall consider the following:
lump sum bid basis; or 
items wise; or 
Lot wise (contracts), 

ITB Number 30.1

BDS Clause Number 14
ITB Number 31.1

Domestic Preference [applicable / not applicable]

ITB Number 31.2

Selection technique adopted will be: 
The Procuring Agency shall use any of the following evaluation techniques for determination of successful bid.

Least Cost Base Selection (LCBS)
Quality and Cost Based Selection (QCBS)
Quality Based Selection (QBS)
[Insert the Evaluation Technique]

Selection technique adopted will be: Least Cost Based Selection (LCBS)
see Evaluation Criteria

F. Review of Procurement Decisions

BDS Clause Number 15
ITB Number 41.1

Grievence against this procurement shall be submitted online on EPADS v2.0.

Arbitrator shall be appointed by mutual consent of the both parties.

ITB Number 42.2

The Address of PPRA Grievance Redressal Appellate Committee to submit a copy of grievance:

Grievance Redressal Appellate Committee,
Public Procurement Regulatory Authority
1st Floor, G-5/2, Islamabad, Pakistan
Tel: +92-51-9202254

Eligibility Criteria

All Active Taxpayers shall be eligible to participate in the procurement process, unless expressly excluded or otherwise restricted under the Eligibility Criteria specified by the Procuring Agency.

Required Registration

NADRA CITIZENSHIP (CNIC/NICOP)

FBR (NTN)

FBR (GSTN)

Eligibility Criteria Document
A fresh Bank Statement Yes

Evaluation Criteria

Eligibile bidder(s) with substantially responsive bid(s) offering Least Cost Based Selection (LCBS) shall be consider for the award of contract(s).

Least Cost Based Selection (LCBS)

Items/Lots

Items Without Lots :

Item UNSPSC Delivery Schedule Quantity Bid Security
P.P.R Pipe 25mm Master PN-20 Pipeline
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3000/rft
3000/rft 5700 PKR
P.P.R Pipe 32mm Master PN-20 Pipeline
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3000/rft
3000/rft 5700 PKR
P.P.R Pipe 63mm Master PN-20 Pipeline
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1000/rft
1000/rft 5700 PKR
P.P.R Elbow 25mm Master PN-20 ABS plastic pipe elbow
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 210/Qty
210/Qty 5700 PKR
P.P.R Elbow 32mm Master PN-20 ABS plastic pipe elbow
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 220/Qty
220/Qty 5700 PKR
P.P.R Elbow 63mm Master PN-20 ABS plastic pipe elbow
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
P.P.R Socket 25mm Master PN-20 ABS plastic pipe socketweld flange
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 200/Qty
200/Qty 684 PKR
P.P.R Socket 32mm Master PN-20 ABS plastic pipe socketweld flange
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 200/Qty
200/Qty 684 PKR
P.P.R Socket 63mm Master PN-20 ABS plastic pipe socketweld flange
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 80/Qty
80/Qty 684 PKR
P.P.R Tee 25mm Master PN-20 ABS plastic pipe tee
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 684 PKR
P.P.R Tee 32mm Master PN-20 ABS plastic pipe tee
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 55/Qty
55/Qty 684 PKR
P.P.R Tee 62mm Master PN-20 ABS plastic pipe tee
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 30/Qty
30/Qty 684 PKR
P.P.R Tee 63x25mm Master PN-20 ABS plastic pipe tee
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 30/Qty
30/Qty 684 PKR
P.P.R Tee 63x32mm Master PN-20 ABS plastic pipe tee
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 30/Qty
30/Qty 684 PKR
P.P.R Union 25mm Master PN-20 ABS plastic pipe union
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 684 PKR
P.P.R Union 32mm Master PN-20 ABS plastic pipe union
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
P.P.R Union 63mm Master PN-20 ABS plastic pipe union
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 30/Qty
30/Qty 158 PKR
P.P.R valve 25 Master PN-20 Air valve
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
P.P.R valve 32 Master PN-20 Air valves / cylinders rule 3, 4 & 9
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
P.P.R valve 63 Master PN-20 Air valve
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 30/Qty
30/Qty 158 PKR
Thread Elbow 32x 3/4” Master PN-20 ABS plastic pipe elbow
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
Thread Elbow 25x 34” Master PN-20 ABS plastic pipe elbow
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
Thread Elbow 32x 1/2” Master PN-20 ABS plastic pipe elbow
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 158 PKR
Thread Elbow 25x 1/2” Master PN-20 ABS plastic pipe elbow
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 158 PKR
Hand Troli (Rary with tire) heavy work Hand trucks or accessories
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Pickaxe (Genti) with Handle Pickaxe
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
Showel (Belcha) Special Heavy Duty as per requirement Bathing/showering assessment
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 158 PKR
Cheni hard steel Alloy steel sucker rods
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 158 PKR
Hammer 2kg Claw hammer
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 158 PKR
Grinder Machine big SMT Crankshaft grinder
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Gotti set 6mmx32mm Finland Pipeline
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Hilti Machine SMT best quality Automatic teller machine accessories
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
P.P.P Heater 25mm to 63mm Best as sample Absorption chiller heater
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
P.P.R Cutter Bar or rod cutter
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Plier best quality Electrostatic pliers
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 4/Qty
4/Qty 158 PKR
Grip Plier best quality Finland Mini pliers
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Saw Frame best quality heavy duty as per sample Bow saw
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 4/Qty
4/Qty 158 PKR
Screw Driver best quality Acetabular screws
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 4/Qty
4/Qty 158 PKR
Wrench 12”, 18”, 24”, best as complete 2+2+2=6 Heavy duty Finland Adjustable wrenches
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Screw Wrench 10” 12”, 18”, 2best as complete 2+2+2=6 Heavy duty Finland Adjustable wrenches
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Spinner Set complete 6/32 mm Finland Spinners
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/set
1/set 158 PKR
Combination spinner Panna Set complete 9/33” Finland Automated slide spinner
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/set
1/set 158 PKR
Ring spinner set Spinners
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/set
1/set 158 PKR
Black Cement (50 kg Bestway/Fouji) Acoustic cement bond ratio logging services
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 350/bag
350/bag 158 PKR
Sand lanaspur/Ghazi Sand or water tables or activity centers
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2500/cft
2500/cft 158 PKR
Crush ½” Crushers
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1200/cft
1200/cft 158 PKR
Bricks Grade I Brick mould
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2500/Qty
2500/Qty 158 PKR
Pedestal Fan 24” copper winding Pak Fans Pedestals
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Emulsion Paintex ICI white Emulsions
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 56/balty
56/balty 158 PKR
Emulsion Paintex ICI off white Emulsions
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 62/balty
62/balty 158 PKR
Enamel Duluxe ICI white Enamel paints
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/gallon
20/gallon 158 PKR
Enamel Duluxe ICI off white Enamel paints
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 60/gallon
60/gallon 2350 PKR
Weather Shield ICI any color Weather ship
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 25/balty
25/balty 2350 PKR
Turpentine oil Topical turpentine oil preparations
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 250/Ltr
250/Ltr 200 PKR
Plaster of Paris Plaster or mortar mixers
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 250/Qty
250/Qty 158 PKR
White Cement 50 kg Cement
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/bag
20/bag 600 PKR
Sand Paper 120 No Acid sand control pumping services
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 150/Qty
150/Qty 158 PKR
Brush for Emulsion and Enamel paint 5”+4” black cat 20+20 Basters or basting brushes
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 40/Qty
40/Qty 158 PKR
Plastic Water Tap best Super Asia Plastic water jet cut gasket
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 500/Qty
500/Qty 246.66 PKR
Steel Water Tap best Super Asia 230 gram Alloy steel/stainless steel check valve
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 300/Qty
300/Qty 158 PKR
Sink mixer with Head Faisal Boring or sinking machinery
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 158 PKR
Wash Basin White 3 Star 18"X24" with pedestal , bracket Wash pipe
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
Wash Basin mixer Faisal Basin Sets-Single
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 25/Qty
25/Qty 158 PKR
Plastic Water Tank 200 gallon master Tuff original Six ply 01 year Warranty Company printed on body. Above ground storage or tankage service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Measurement Tap 12’x50’ 2+2=4 Acoustic measurement when drilling services
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 4/Qty
4/Qty 158 PKR
Pillar cock faisal Advertising pillars
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 15/Qty
15/Qty 158 PKR
Screw Flat 12” Screw for plastic
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Gotti set 6/32mm Finland Pipeline spheres
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Star screw driver set Aircraft drive shafts power take offs or screw jacks
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/Qty
3/Qty 158 PKR
Ball valve ½” Super Asia Ball valves
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
Ball valve ¾” Super Asia Ball valves
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 56/Qty
56/Qty 184.44 PKR
Flash Tank Master Above ground storage or tankage service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 24/Qty
24/Qty 158 PKR
W.C Indian Best Quality Master Washroom sanitation services
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 24/Qty
24/Qty 158 PKR
P Trap 4" Glazzed Fiber straps
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 30/Qty
30/Qty 158 PKR
Wooden Piece kale 7’x4” 1 ½” Wooden bar
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 60/Qty
60/Qty 158 PKR
Wooden Piece kale 7’x4” 2 ½” Wooden piling
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 60/Qty
60/Qty 158 PKR
Wooden Piece kale 7’x10” x 1 ½ " Wooden piling
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 158 PKR
Wooden Piece kale 7’x7” 1 ½” Wooden piling
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
Wooden kale Piece 7’x3” 1 ½” Wooden piling
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 158 PKR
Wooden kale Piece 10’x2 ½” x 1 ¼ ” (22x60) Wooden piling
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 5/bundle
5/bundle 158 PKR
Wooden Chockat Complete 80"x42” (3”x4”) kale Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
Wooden Solid door 78”x37” 1 ½” Pakistani kale Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
Wooden wire mesh Window 34”x20” x1 ½” Pakistani kale Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 40/Qty
40/Qty 158 PKR
Wooden wire mesh door 78”x37” 1 ½” Pakistani kale Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
Wooden Window Complete with glass Pakistani Kale Complete 34"x20"x 1 ½” Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 40/Qty
40/Qty 158 PKR
Wooden Solid door double 78”x44” x 1 ½” Pakistani kale Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 158 PKR
Wooden Malaysian Door with ply 78”x37” 1 1/2” Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 1000 PKR
Wooden wire mesh window complete 44”x19” x 1.5” Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
Glass window complete 44”x19” x1/2” x 6mm (Window) 1 ½” Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
Handle Lock Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 48/Qty
48/Qty 158 PKR
Table Drazz Lock 3/4" Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 60/Qty
60/Qty 158 PKR
Handle "4”x5”(30+30) Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 60/box
60/box 158 PKR
Door Hinges 4” Pistol Marka Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 60/box
60/box 158 PKR
Tower Bolt 6”x8” 60+60=120 Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 120/box
120/box 158 PKR
Sliding Bolt 12” Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 72/Qty
72/Qty 158 PKR
Door Spring Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 60/Qty
60/Qty 158 PKR
Wooden Chockat 80"x42" (3”x4”) with wire mash door Pakistani Kale Complete 78"x37" x 1 ½” Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Wooden Chockat 80"x42" with solid door Pakistani Kale Complete 80"x38" 1 ½” Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Lamination Sheet Patex 8'x4' x ¾” Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Door Closer Japan/China Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 27/Qty
27/Qty 158 PKR
Glass Cutter (kalam) Glass cutters
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Glue Jarman 1 kg Glitter glue
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/dozen
20/dozen 158 PKR
Iron File (Raiti) Complete Set with 4 Piece Ascorbic acid/iron
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 4/Qty
4/Qty 158 PKR
Chisel set complete best quality Chisel bit
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Glander tap san SMT Diagnosis of glanders
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/Qty
3/Qty 158 PKR
Electrical Hand cutter 7” SMT Cutter bar
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Bit set (barma)SMT Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/set
3/set 158 PKR
Concrete Bit set (barma) SMT Cement or concrete posts
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/set
3/set 158 PKR
Utility Knife cutter Dough knife
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Secular blade 10”x12” 6+6=12 Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 12/Qty
12/Qty 158 PKR
Combination stone Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
Pincer (Jamboor) 12” Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
Canadian Takora Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 60/Qty
60/Qty 158 PKR
Tri squire 12” (Goonia) Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Hammer Black 01 kg Clawy Ammer KTC Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 12/Qty
12/Qty 158 PKR
Flat hammer KTC as per sample Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 12/Qty
12/Qty 158 PKR
Safety Glass Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Plier best quality Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
Hand Saw Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
Grinder Machine SMT Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Chisel complete Set Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 4/Qty
4/Qty 158 PKR
Level 12” + 18" (2+2) Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 4/Qty
4/Qty 158 PKR
Hand Planer Complete set best quality Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
Jack planer (Randa) Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/Qty
3/Qty 158 PKR
Electric Drill SMT Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/Qty
3/Qty 158 PKR
Charging Drill Machine SMT Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Adjustable spanner SMT Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Tin cutter best quality Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Measurement Tap 12’x24’ 8+8+=16 Air pollution monitoring or measurement services
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 16/Qty
16/Qty 158 PKR
Screw 4 slotted 12” Allen screw
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Screw driver four way slotted Offset screw driver
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Screw driver Flat 12” Offset screw driver
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Screw driver set complete Offset screw driver
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/Qty
3/Qty 158 PKR
Screw star bit Acetabular screws
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/box
6/box 158 PKR
Steel Nail 1” Nail or router gauges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 40/pack
40/pack 158 PKR
Steel Nail 2” Nail or router gauges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 40/pack
40/pack 158 PKR
Steel Nail 3” Nail or router gauges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 40/pack
40/pack 158 PKR
Steel Nail 4” Nail or router gauges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 40/pack
40/pack 158 PKR
Steel Nail 1 1/2” Nail or router gauges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 40/pack
40/pack 158 PKR
Nail 1" x 17 No (Head) Nail or router gauges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Kg
20/Kg 158 PKR
Nail 1" x 17 No Top Less Nail or router gauges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Kg
5/Kg 158 PKR
Nail 1" x 14 No (Head) Nail or router gauges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Kg
10/Kg 158 PKR
Nail 1 1/4" x17 No (Head) Nail or router gauges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Kg
10/Kg 158 PKR
Nail 1 1/2" x 17 No Top Less Nail or router gauges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Kg
20/Kg 158 PKR
Nail 1 1/2" x 14 No (Head) Nail or router gauges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Kg
20/Kg 158 PKR
Nail 2" x 14 No (Head) Nail or router gauges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Kg
20/Kg 158 PKR
Nail 2" x 15 No Top Less Nail or router gauges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Kg
20/Kg 158 PKR
Nail 3"x14 No (Head) Nail or router gauges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Kg
20/Kg 158 PKR
Nail 3"x12 No (Head) Nail or router gauges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Kg
20/Kg 158 PKR
Nail 4" x 12 (Head) Nail or router gauges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Kg
10/Kg 158 PKR
Black Screw 1 1/2" x 6 No Set screws
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/box
20/box 158 PKR
Black Screw 1" x 6 No Set screws
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/box
20/box 158 PKR
Black Screw 2 1/2" x 6 No Set screws
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/box
20/box 158 PKR
Black Screw 3" x 6 No Set screws
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/box
20/box 158 PKR
Black Screw 4" x 8 No Set screws
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/box
20/box 158 PKR
Black Screw 5/8" x 6 No Set screws
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/box
20/box 158 PKR
Black Screw 3/4" x 6 No Set screws
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/box
20/box 158 PKR
Plimer Machine Blade 24" x 1 1/2" (As per Sample) Autopsy knives or blades
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 12/Qty
12/Qty 158 PKR
Made to order MS pipe bore dia of 10-3/4", with wall thickness of 1/8" Pipeline
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 60/rft
60/rft 158 PKR
Flange 12 inch diameter, MS 1/2" thick with 12 holes Cylinder diameter measuring equipment
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 158 PKR
Flange 10 inch diameter, MS 1/2" thick with 12 holes ABS plastic pipe plate flange
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 158 PKR
AC copper Pipe 1/2" original cooper Universal brand/equivalent 18 Gauge Commercial copper pipe
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/rft
50/rft 158 PKR
AC copper Pipe 1/4" original cooper Universal brand/ equivalent 18 Gauge Copper pipe cross
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/rft
50/rft 158 PKR
Gas R 410 USA (13.5 kg cylinder) Air or gas tanks or cylinders
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 4/Cylinder
4/Cylinder 158 PKR
Fully copper pipe 5/8" Universal brand/equivalent 18 Gauge Copper pipe cap
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/rft
50/rft 158 PKR
Fully copper pipe 3/8" Universal brand/equivalent 18 Gauge Copper pipe cross
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/rft
50/rft 158 PKR
Baby Drill Machine SMT 1-13mm bit size Bench drilling machine
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Baby grinder ingco/total/equivalent 5 inch Bench grinder
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Rotary Compressor 18000 Btu 220V Mitsubishi/equivalent Rotary compressors
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/Qty
3/Qty 158 PKR
Rotary Compressor 24000 Btu 220V Mitsubishi/equivalent Rotary compressors
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/Qty
3/Qty 158 PKR
R-134 A gas USA (13.5 kg cylinder) Air or gas tanks or cylinders
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/cylinder
2/cylinder 200 PKR
R-22 gas USA (13.5 kg cylinder) Air or gas tanks or cylinders
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 5/cylinder
5/cylinder 200 PKR
PPF A/G Cartridge 20" for water filtration plant Air filtration or purification equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
PPY Imperial Cartridge 20" for water filtration plant Water filtration cartridges
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
Anti-Scallant for water filtration plant Air filtration or purification equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Ltr
10/Ltr 158 PKR
Chlorine Dioxide Table Detrain for water filtration plant Chlorine Cl
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 30/Qty
30/Qty 158 PKR
UV lamp 33" for filtration plant Air filtration or purification equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Capacitor 60 mfu 220v for AC Amber Capacitor tester
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 12/Qty
12/Qty 158 PKR
Capacitor 50 mfu 220v for AC Amber Capacitor tester
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 12/Qty
12/Qty 158 PKR
Capacitor 35 mfu 220v for AC Amber Capacitor networks
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 12/Qty
12/Qty 158 PKR
GI Nut Bolt Best Quality 5/8” x 4” as per sample Bearing nuts
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 80/Kg
80/Kg 158 PKR
RCC Pipe 9" Dia 6 ft length with collar ABS plastic pipe adapter
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 12/Qty
12/Qty 158 PKR
Magnetic contactor relay 220v for ACs Magnetic circuit breakers
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 12/Qty
12/Qty 158 PKR
Gas Welding rod (copper) Gas welding or brazing or cutting apparatus
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Kg
2/Kg 158 PKR
Flare Nut 1/2" brass high quality for AC as per sample Flares
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 24/Qty
24/Qty 158 PKR
Flare Nut 1/4" brass high quality for AC as per sample Flares
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 24/Qty
24/Qty 158 PKR
Flare Nut 5/8" brass high quality for AC as per sample Flares
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 24/Qty
24/Qty 158 PKR
Flare Nut 3/8" brass high quality for AC as per sample Flares
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 24/Qty
24/Qty 158 PKR
Union 1/2" for AC best quality as per sample ABS plastic pipe union
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 24/Qty
24/Qty 158 PKR
Union 1/4" for AC best quality as per sample ABS plastic pipe union
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 24/Qty
24/Qty 158 PKR
Union 5/8" for AC best quality as per sample ABS plastic pipe union
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 24/Qty
24/Qty 158 PKR
Union 3/8" for AC best quality as per sample ABS plastic pipe union
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 24/Qty
24/Qty 158 PKR
Screw driver set best quality ingco/ total/ equivalent 6 pieces Offset screw driver
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 4/Qty
4/Qty 158 PKR
Plier ingco/equivalent Pliers set
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 12/Qty
12/Qty 158 PKR
Cutter nose plier ingco/total/equivalent Cutters
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Stain less steel hinges for aluminum door and brand (China) Alloy steel/stainless steel check valve
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 48/Qty
48/Qty 158 PKR
Aluminum door closer Best Quality Door closers
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 24/Qty
24/Qty 158 PKR
Aluminum door lock Best Quality Door closers
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 24/Qty
24/Qty 158 PKR
Aluminum blind rivets Different sizes (4-8mm die x 16.0mm) length Blind rivets
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Welding rod 10 No Tiger/equivalent as approved Welding rod
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 15/pack
15/pack 158 PKR
Die tap set( 3mm to 12mm) China Tape drives
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/set
1/set 158 PKR
Combination tools set original INGCO German/japan (142 piece) Production logging tools spare parts and accessories
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/set
1/set 158 PKR
Hilti drill 500w SMT 6220 Acoustic measurement when drilling services
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
drill bit set (1mm to 13mm) Darmit Acoustic measurement when drilling services
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Oil Filter (Perkins 2654403) Oil filters
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 12/Qty
12/Qty 158 PKR
Fuel Filter (Perkins 26561113 ) Fuel filters
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 12/Qty
12/Qty 158 PKR
Oil Filter Fled Guard (Lf691A) Oil filters
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 24/Qty
24/Qty 158 PKR
Fuel Filter Fled Guard (FF4070) Fuel filters
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 12/Qty
12/Qty 158 PKR
Air filter for Dorman Generator 300KVA as per sample Air filters
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Compressor rotary type 24000 BTU 220V Mitsubishi/equivalent as approved by client Air compressor rental and maintenance service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Charging Drill Machine (Medium Size) SMT Acoustic measurement when drilling services
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Cutting Disc 7 Inch for hand grinder (SMT Company/equivalent ) Aheli amarillo seed or cutting
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
Baby Grinder Cutting Disc 5 Inch Thick MST/equivalent Bench grinder
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 158 PKR
Grinding Disc 1/2" x 4" (SMT Company/equivalent) Centerless grinding machine
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
Bass Grinder Cutting Disc 1"x12" (SMT Company/ equivalent) Bench grinder
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 24/Qty
24/Qty 158 PKR
Welding Lead wire (copper 16mm) Arc welding services
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/rft
50/rft 158 PKR
Gas kit rubber sheet 8mm Sharpening stones or tools or kits
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 40/Kg
40/Kg 158 PKR
Key set SMT Key seating machine
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Gotti set SMT Anatomy charts or sets
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
AC service gun complete set best quality SMT Air conditioning installation or maintenance or repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Wrapping Tap for ACs Gift wrapping paper or bags or boxes
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 158 PKR
Self-type Screw 3/4 inch Augment connection screws
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/pack
50/pack 158 PKR
Wire 3/0.029 Single Core Copper (Newage/Pakistan) full gage 1.5mm (Red+Black) 15+15=30 Copper wire
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 30/roll
30/roll 3787.2 PKR
Wire 7/0.029 Single Core Copper (Newage/Pakistan) full gage 2.5mm (Red+Black)(10+10) Copper wire
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/roll
20/roll 3787.2 PKR
Wire 3/0.029 Two Core Copper (Newage/Pakistan) full gage 1.5mm (1+1) Copper wire
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/roll
2/roll 3787.2 PKR
Wire 7/0.029 Two Core Copper (Newage/Pakistan) Full gage2.5mm (1+1) Copper wire
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/roll
2/roll 158 PKR
Wire 7/0.036 Two Core Copper (Newage/Pakistan) Full gage 4mm (2+1) Copper wire
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/roll
3/roll 158 PKR
Light Plug (13 Amp) Madina/Hero equivalent Air purification and LED lighting fixture
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 200/Qty
200/Qty 158 PKR
Power Plug (20 Amp) Hero/Madina equivalent Auxiliary power unit systems APUs
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 158 PKR
Capacitor (3.5uf) Best Quality Capacitor tester
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 300/Qty
300/Qty 158 PKR
Switch Piano Type (Hero/equivalent) Switch part or accessory
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1000/Qty
1000/Qty 2640 PKR
Check Valve (3”) Brass Best Quality Control valves
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 158 PKR
Bulb Mercury 250 Watt (Philips/Osram) Original Pipette bulbs
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 158 PKR
Choke (Mercury) 250 Watt Philips Original Copper Copper
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 158 PKR
Socket Piano Type(Hero/equivalent) Sockets
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 500/Qty
500/Qty 158 PKR
PVC Duct ¾” Dura Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 110/length
110/length 158 PKR
Insulation Tapes Osaka Drafting dots or tapes
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 500/Qty
500/Qty 158 PKR
Link Unit (11kv) H.T China complete set Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/Qty
3/Qty 158 PKR
Circuit Breaker (32A) 2 Pole (Terasaki/ equivalent) Circuit breakers
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
PVC box 4x4 Madina (single hole) Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 200/Qty
200/Qty 158 PKR
Wire 40/0.076 2 core Flexible Fast/GM Copper wire
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/roll
3/roll 158 PKR
Steel Nail (1”+ 1½” ) (15+15) Wire nails
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 30/pack
30/pack 158 PKR
Steel (1 1/2''+ 2 ½”) (15+15) 8No Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 30/pack
30/pack 158 PKR
HT (High tension) Rod for 11 KV lines 10 ft 2 piece total 20 ft (IESCO approved) Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/set
1/set 158 PKR
Wire 7/0.044 single core copper (Newage/Pakistan) full gage (6mm) Copper wire
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/roll
1/roll 158 PKR
Wire 7/0.064 single core copper (Newage/Pakistan) full gage (16mm) Copper wire
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/roll
1/roll 158 PKR
Dimmer (Pak/Yunus/Royal) Dimmers and accessories
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 200/Qty
200/Qty 158 PKR
Light Plug box (4"X4") china fitting Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 158 PKR
Main Switch Iron Clair (100amp) T/P (Heavy duty) Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Retched set (gotti panna)(72-77) pieces INGCO or equivalent original German/japan Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/set
1/set 158 PKR
Main Switch S/P (30A) Iron Clair large size, best quality Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 30/Qty
30/Qty 158 PKR
PVC/Back o lite sheet (9'X11") 6 hole Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
PVC/Back o lite sheet (4"X4") (2 hole + 1 hole ) (25+25) Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
PVC Socket (3/4") Polo/Dura/Beta Point socket
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/dozen
10/dozen 158 PKR
PVC Bend (3/4") Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/dozen
10/dozen 158 PKR
Three Pin Light shoe (10-13Amp) Hero/PPI/equivalent Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 158 PKR
Three Pin Power shoe (15-20Amp) Hero/PPI/Equivalent Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
Line man Gloves (lather+ Rubber) (Wapda Approved) Electric wireline manpower services
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/set
2/set 158 PKR
Line man Belt (lather) Heavy Duty IESO / Wapda Approved Belts or suspenders
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/Qty
3/Qty 158 PKR
Line man Shoes Service/Bata (7No, 8No or 9 No)2+3+1 Mills or burning shoes
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/set
6/set 158 PKR
Long Shoes Rubber (8 No, 9 No) Best Quality Safety shoes
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/set
2/set 158 PKR
HT Tester with fibber rod 4-5 feet for 11KV lines Complete Wapda approved Aggregate specific gravity tester
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
PVC Clips (6 No +8No) (10+10) 100 pieces in each packet Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/pack
20/pack 158 PKR
Knife Heavy Duty folding 3" with wooden handle Dough knife
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Paper Cutter with Heavy Duty Blade Cutters
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Tester 220 Volt L.T Best Quality White Brake tester
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 158 PKR
Clamp Meter UNI-T (202 A+) Digital with leads Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Cutter Plier C.Mart A0075.240 Original or as per sample Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Plier 8" imported best quality Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
Screw driver 8" flat 2 way Imported Best quality Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
Screw driver 8" (Round) 4 way Imported Best quality Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
Circuit Breaker (100A) 3 Pole (Terasaki/equivalent) Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Rawal Bolt ( 2 1/2" x 3/6") Best Quality Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 158 PKR
LED Ceiling light 18 watt 6" Size Osaka/equivalent warm Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
Choke 125watt Phillips/equivalent original copper Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 158 PKR
Mercury bulb 125watt Phillips/equivalent 3 pin Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 158 PKR
Torch full beam sogo japan/equivalent Model JPN-8880 Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Power Plug Box (4"x4") China Fitting Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 158 PKR
Line Man Helmet Plastic / Fiber Wapda Approved different sizes as per requirement or standard size Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
Uniform for Electric Staff (Trouser + Shirt) Navy Blue Color imported fabric (6+2) pocket + 2 tags on shirt (electrical staff) front side, NIH on back side different sizes, size will be provided by MSD on the spot or as per sample Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 14/Qty
14/Qty 158 PKR
Tool Bag Para Shoot/ Best Material 03 pocket (15" x 15") with hanging belt Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/Qty
3/Qty 158 PKR
Holder 3 Pin Back O Lite Best Quality (Cooper Pins) Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 310/Qty
310/Qty 158 PKR
PVC Box 8"x10" Madina (8 hole) Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 110/Qty
110/Qty 158 PKR
PVC Box 7"x4" Madina (5 hole) Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 110/Qty
110/Qty 158 PKR
PVC Pipe 3/4" Madina (Polo / Beta / Adam jee Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 100/length
100/length 158 PKR
Power Plug 20 AMP (Multi /Bush /Madina) or equivalent Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 158 PKR
Wooden Screw 1"+ 1 1//2" + 2" + 2 1/2" (10+20+10+20) 60 Box Set screws
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 60/box
60/box 158 PKR
Screw Driver (6"+8") Multi Flat + round combined 3+3 imported Offset screw driver
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Line gauge (Imperial Single) Jaw exercise equipments
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Plaring tool set complete Pneumatic tool set
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Clamp Meter (AC+ DC) Digital Monitor or meter accessories
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Adjustable Warne 12" Jaw exercise equipments
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Holesaa (Hole) 4" Jaw exercise equipments
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Player Best Quality Measuring exercise equipments
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Screw Driver Complete Set Offset screw driver
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Gass Charging Lead 04 inverter Ac + 4 Manual AC (4+4=8) Degassing service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 8/Qty
8/Qty 158 PKR
Wire 110/76 (Cooper) 3 Core Copper wire
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/roll
1/roll 158 PKR
L. Key Sets Best Quality Key seating machine
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Ring + Pana combination complete set Measuring exercise equipments
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Rings keys set 6mm to 24mm Keys
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Ring Panna Set 6mm to 24mm Acetabular rings
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Support screw driver(Hoteche) Offset screw driver
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/box
2/box 158 PKR
Building Rod Tiger or equivalent as approved Abortion of products of conception, abortifacient, via natural or artificial opening
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/pack
20/pack 158 PKR
Safety Screen use for Welding Anti-slip safety products
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Safety Glasses black use for welding Safety glasses
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 12/Qty
12/Qty 158 PKR
Safety Gluffs use for welding Anti-slip safety products
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/set
6/set 158 PKR
Safety shoes 8 No use for welding Safety shoes
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/set
2/set 158 PKR
Grease High Temperature Grease
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Kg
20/Kg 158 PKR
Drill Machine hilti heavy duty with bit Complete set Hitachi SMT /ingco/ Equivalent Brazed drill
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 158 PKR
Steel Nail 1 inch best quality Finishing nails
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/pack
50/pack 158 PKR
Emulsion Paintex ICI ash white Emulsions
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 13/balty
13/balty 158 PKR
Enamel Dulux ICI ash white Enamel paints
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/gallon
3/gallon 158 PKR
Enamel Dulux ICI Light Grey Enamel paints
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 4/gallon
4/gallon 158 PKR
Acrylic Paint nippon/paintex/ equivalent best quality. Acrylic paints
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/gallon
6/gallon 158 PKR
Emulsion Ruler with rod Captain + Tray Emulsions
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 5/seat
5/seat 158 PKR
Enamel Ruler with rod Captain + Tray Rulers
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 8/seat
8/seat 158 PKR
West pipe best quaility Pipeline
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 4/Qty
4/Qty 158 PKR
West Cup best quaility East west cooperation services
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 4/Qty
4/Qty 158 PKR
P.P.R Socket 25mm 1/2 (Master) PN-20 Point socket
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
P.P.R Elbow 25mm x 1/2 (Master) PN-20 ABS plastic pipe elbow
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Bath Room Accessories complete set (Master) Kitchen and bathroom remodeling service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/set
6/set 158 PKR
GI Nipple 1/2 ABS plastic pipe nipple
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Tee Cock Faisal ABS plastic pipe tee
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
Looking Mirror (2’x1-1/2’) Bathroom or toilet mirror
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 158 PKR
Flush Tank Golden/master/equivalent as approved by client Above ground storage or tankage service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 4/Qty
4/Qty 158 PKR
Stove Nasgas/Super Asia five burner Heating stoves
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Hockey Pipe best quality Pipeline
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Screw Black 1 1/2x8 No Aircraft drive shafts power take offs or screw jacks
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/pack
3/pack 158 PKR
Lamination Sheet (Patex) (8'x4'x3/4") Lamination film
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 14/Qty
14/Qty 505 PKR
Wire mash 6’x3’ Islamabad Wire mesh sheet
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
PVC Gola 16mm silver PVC garage door
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 60/length
60/length 189.6 PKR
Elfie jimsa (Big) Jaw exercise equipments
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/bottle
3/bottle 158 PKR
Wooden Lasani sheet (8’x4’ x 1/4”) Wooden framework
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/sheet
10/sheet 158 PKR
Wooden molding Gola (8’x 3/4’’ x 3/4’’) Rough carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 14/Qty
14/Qty 158 PKR
Wooden pieces (7’ x 1 1/2” x 3”) Rough carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 8/Qty
8/Qty 158 PKR
P.P.R Elbow ¾ 32mm Master PN-20 ABS plastic pipe elbow
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 158 PKR
Double bib cock Faisal Bib
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 158 PKR
Wire mash 6’x4’ Cable or wire lug
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 158 PKR
Wooden kale wire mesh +Door 37”x78” 1 ½” Rough carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 158 PKR
Glass 4’x4’ (6mm or 5mm) best quality Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 50/sheet
50/sheet 947 PKR
Sliding Bolt 8” pistol Parts of guns or pistols
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 12/Qty
12/Qty 158 PKR
Screw Black 5/8’ x 6 Allen screw
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/box
6/box 158 PKR
Lassani sheets size (8’x4’x3/4’) Finish carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 6/Qty
6/Qty 158 PKR
Wooden Kale Piece size 2 ½” x 4” x 10’ Rough carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 15/Qty
15/Qty 158 PKR
Press Board size 8’x4’ x 6mm Rough carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 158 PKR
Patti Kabza size 6’ Rough carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 15/Qty
15/Qty 158 PKR
Door Handle rod size 6” Rough carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 30/Qty
30/Qty 283.8 PKR
Catcher Plastic Rough carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 40/Qty
40/Qty 283.8 PKR
Screw Black ¾’ x 6 No Rough carpentry service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 3/box
3/box 283.8 PKR
Cooking Range Three Burner Super Asia/Nasgas Complete (Best Quality) Cooking machinery
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 505 PKR
Electric Geyser 35 Gallon Super Asia/ Nas Gas with Thermostat (Complete Electrical equipment maintenance and repair service
Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 799.56 PKR

Related Services of Goods:

No

Items/Lot Specification

Items Without Lots :

Item: P.P.R Pipe 25mm Master PN-20

UNSPSC: Pipeline

Specifications / Requirementsss:

P.P.R Pipe 25mm Master PN-20

Item: P.P.R Pipe 32mm Master PN-20

UNSPSC: Pipeline

Specifications / Requirementsss:

P.P.R Pipe 32mm Master PN-20

Item: P.P.R Pipe 63mm Master PN-20

UNSPSC: Pipeline

Specifications / Requirementsss:

P.P.R Pipe 63mm Master PN-20

Item: P.P.R Elbow 25mm Master PN-20

UNSPSC: ABS plastic pipe elbow

Specifications / Requirementsss:

P.P.R Elbow 25mm Master PN-20

Item: P.P.R Elbow 32mm Master PN-20

UNSPSC: ABS plastic pipe elbow

Specifications / Requirementsss:

P.P.R Elbow 32mm Master PN-20

Item: P.P.R Elbow 63mm Master PN-20

UNSPSC: ABS plastic pipe elbow

Specifications / Requirementsss:

P.P.R Elbow 63mm Master PN-20

Item: P.P.R Socket 25mm Master PN-20

UNSPSC: ABS plastic pipe socketweld flange

Specifications / Requirementsss:

P.P.R Socket 25mm Master PN-20

Item: P.P.R Socket 32mm Master PN-20

UNSPSC: ABS plastic pipe socketweld flange

Specifications / Requirementsss:

P.P.R Socket 32mm Master PN-20

Item: P.P.R Socket 63mm Master PN-20

UNSPSC: ABS plastic pipe socketweld flange

Specifications / Requirementsss:

P.P.R Socket 63mm Master PN-20

Item: P.P.R Tee 25mm Master PN-20

UNSPSC: ABS plastic pipe tee

Specifications / Requirementsss:

P.P.R Tee 25mm Master PN-20

Item: P.P.R Tee 32mm Master PN-20

UNSPSC: ABS plastic pipe tee

Specifications / Requirementsss:

P.P.R Tee 32mm Master PN-20

Item: P.P.R Tee 62mm Master PN-20

UNSPSC: ABS plastic pipe tee

Specifications / Requirementsss:

P.P.R Tee 62mm Master PN-20

Item: P.P.R Tee 63x25mm Master PN-20

UNSPSC: ABS plastic pipe tee

Specifications / Requirementsss:

P.P.R Tee 63x25mm Master PN-20

Item: P.P.R Tee 63x32mm Master PN-20

UNSPSC: ABS plastic pipe tee

Specifications / Requirementsss:

P.P.R Tee 63x32mm Master PN-20

Item: P.P.R Union 25mm Master PN-20

UNSPSC: ABS plastic pipe union

Specifications / Requirementsss:

P.P.R Union 25mm Master PN-20

Item: P.P.R Union 32mm Master PN-20

UNSPSC: ABS plastic pipe union

Specifications / Requirementsss:

P.P.R Union 32mm Master PN-20

Item: P.P.R Union 63mm Master PN-20

UNSPSC: ABS plastic pipe union

Specifications / Requirementsss:

P.P.R Union 63mm Master PN-20

Item: P.P.R valve 25 Master PN-20

UNSPSC: Air valve

Specifications / Requirementsss:

P.P.R valve 25 Master PN-20

Item: P.P.R valve 32 Master PN-20

UNSPSC: Air valves / cylinders rule 3, 4 & 9

Specifications / Requirementsss:

P.P.R valve 32 Master PN-20

Item: P.P.R valve 63 Master PN-20

UNSPSC: Air valve

Specifications / Requirementsss:

P.P.R valve 63 Master PN-20

Item: Thread Elbow 32x 3/4” Master PN-20

UNSPSC: ABS plastic pipe elbow

Specifications / Requirementsss:

Thread Elbow 32x 3/4” Master PN-20

Item: Thread Elbow 25x 34” Master PN-20

UNSPSC: ABS plastic pipe elbow

Specifications / Requirementsss:

Thread Elbow 25x 34” Master PN-20

Item: Thread Elbow 32x 1/2” Master PN-20

UNSPSC: ABS plastic pipe elbow

Specifications / Requirementsss:

Thread Elbow 32x 1/2” Master PN-20

Item: Thread Elbow 25x 1/2” Master PN-20

UNSPSC: ABS plastic pipe elbow

Specifications / Requirementsss:

Thread Elbow 25x 1/2” Master PN-20

Item: Hand Troli (Rary with tire) heavy work

UNSPSC: Hand trucks or accessories

Specifications / Requirementsss:

Hand Troli (Rary with tire) heavy work

Item: Pickaxe (Genti) with Handle

UNSPSC: Pickaxe

Specifications / Requirementsss:

Pickaxe (Genti) with Handle

Item: Showel (Belcha) Special Heavy Duty as per requirement

UNSPSC: Bathing/showering assessment

Specifications / Requirementsss:

Showel (Belcha) Special Heavy Duty as per requirement

Item: Cheni hard steel

UNSPSC: Alloy steel sucker rods

Specifications / Requirementsss:

Cheni hard steel

Item: Hammer 2kg

UNSPSC: Claw hammer

Specifications / Requirementsss:

Hammer 2kg

Item: Grinder Machine big SMT

UNSPSC: Crankshaft grinder

Specifications / Requirementsss:

Grinder Machine big SMT

Item: Gotti set 6mmx32mm Finland

UNSPSC: Pipeline

Specifications / Requirementsss:

Gotti set 6mmx32mm Finland

Item: Hilti Machine SMT best quality

UNSPSC: Automatic teller machine accessories

Specifications / Requirementsss:

Hilti Machine SMT best quality

Item: P.P.P Heater 25mm to 63mm Best as sample

UNSPSC: Absorption chiller heater

Specifications / Requirementsss:

P.P.P Heater 25mm to 63mm Best as sample

Item: P.P.R Cutter

UNSPSC: Bar or rod cutter

Specifications / Requirementsss:

P.P.R Cutter

Item: Plier best quality

UNSPSC: Electrostatic pliers

Specifications / Requirementsss:

Plier best quality

Item: Grip Plier best quality Finland

UNSPSC: Mini pliers

Specifications / Requirementsss:

Grip Plier best quality Finland

Item: Saw Frame best quality heavy duty as per sample

UNSPSC: Bow saw

Specifications / Requirementsss:

Saw Frame best quality heavy duty as per sample

Item: Screw Driver best quality

UNSPSC: Acetabular screws

Specifications / Requirementsss:

Screw Driver best quality

Item: Wrench 12”, 18”, 24”, best as complete 2+2+2=6 Heavy duty Finland

UNSPSC: Adjustable wrenches

Specifications / Requirementsss:

Wrench 12”, 18”, 24”, best as complete 2+2+2=6 Heavy duty Finland

Item: Screw Wrench 10” 12”, 18”, 2best as complete 2+2+2=6 Heavy duty Finland

UNSPSC: Adjustable wrenches

Specifications / Requirementsss:

Screw Wrench 10” 12”, 18”, 2best as complete 2+2+2=6 Heavy duty Finland

Item: Spinner Set complete 6/32 mm Finland

UNSPSC: Spinners

Specifications / Requirementsss:

Spinner Set complete 6/32 mm Finland

Item: Combination spinner Panna Set complete 9/33” Finland

UNSPSC: Automated slide spinner

Specifications / Requirementsss:

Combination spinner Panna Set complete 9/33” Finland

Item: Ring spinner set

UNSPSC: Spinners

Specifications / Requirementsss:

Ring spinner set

Item: Black Cement (50 kg Bestway/Fouji)

UNSPSC: Acoustic cement bond ratio logging services

Specifications / Requirementsss:

Black Cement (50 kg Bestway/Fouji)

Item: Sand lanaspur/Ghazi

UNSPSC: Sand or water tables or activity centers

Specifications / Requirementsss:

Sand lanaspur/Ghazi

Item: Crush ½”

UNSPSC: Crushers

Specifications / Requirementsss:

Crush ½”

Item: Bricks Grade I

UNSPSC: Brick mould

Specifications / Requirementsss:

Bricks Grade I

Item: Pedestal Fan 24” copper winding Pak Fans

UNSPSC: Pedestals

Specifications / Requirementsss:

Pedestal Fan 24” copper winding Pak Fans

Item: Emulsion Paintex ICI white

UNSPSC: Emulsions

Specifications / Requirementsss:

Emulsion Paintex ICI white

Item: Emulsion Paintex ICI off white

UNSPSC: Emulsions

Specifications / Requirementsss:

Emulsion Paintex ICI off white

Item: Enamel Duluxe ICI white

UNSPSC: Enamel paints

Specifications / Requirementsss:

Enamel Duluxe ICI white

Item: Enamel Duluxe ICI off white

UNSPSC: Enamel paints

Specifications / Requirementsss:

Enamel Duluxe ICI off white

Item: Weather Shield ICI any color

UNSPSC: Weather ship

Specifications / Requirementsss:

Weather Shield ICI any color

Item: Turpentine oil

UNSPSC: Topical turpentine oil preparations

Specifications / Requirementsss:

Turpentine oil

Item: Plaster of Paris

UNSPSC: Plaster or mortar mixers

Specifications / Requirementsss:

Plaster of Paris

Item: White Cement 50 kg

UNSPSC: Cement

Specifications / Requirementsss:

White Cement 50 kg

Item: Sand Paper 120 No

UNSPSC: Acid sand control pumping services

Specifications / Requirementsss:

Sand Paper 120 No

Item: Brush for Emulsion and Enamel paint 5”+4” black cat 20+20

UNSPSC: Basters or basting brushes

Specifications / Requirementsss:

Brush for Emulsion and Enamel paint 5”+4” black cat 20+20

Item: Plastic Water Tap best Super Asia

UNSPSC: Plastic water jet cut gasket

Specifications / Requirementsss:

Plastic Water Tap best Super Asia

Item: Steel Water Tap best Super Asia 230 gram

UNSPSC: Alloy steel/stainless steel check valve

Specifications / Requirementsss:

Steel Water Tap best Super Asia 230 gram

Item: Sink mixer with Head Faisal

UNSPSC: Boring or sinking machinery

Specifications / Requirementsss:

Sink mixer with Head Faisal

Item: Wash Basin White 3 Star 18"X24" with pedestal , bracket

UNSPSC: Wash pipe

Specifications / Requirementsss:

Wash Basin White 3 Star 18"X24" with pedestal , bracket

Item: Wash Basin mixer Faisal

UNSPSC: Basin Sets-Single

Specifications / Requirementsss:

Wash Basin mixer Faisal

Item: Plastic Water Tank 200 gallon master Tuff original Six ply 01 year Warranty Company printed on body.

UNSPSC: Above ground storage or tankage service

Specifications / Requirementsss:

Plastic Water Tank 200 gallon master Tuff original Six ply 01 year Warranty Company printed on body.

Item: Measurement Tap 12’x50’ 2+2=4

UNSPSC: Acoustic measurement when drilling services

Specifications / Requirementsss:

Measurement Tap 12’x50’ 2+2=4

Item: Pillar cock faisal

UNSPSC: Advertising pillars

Specifications / Requirementsss:

Pillar cock faisal

Item: Screw Flat 12”

UNSPSC: Screw for plastic

Specifications / Requirementsss:

Screw Flat 12”

Item: Gotti set 6/32mm Finland

UNSPSC: Pipeline spheres

Specifications / Requirementsss:

Gotti set 6/32mm Finland

Item: Star screw driver set

UNSPSC: Aircraft drive shafts power take offs or screw jacks

Specifications / Requirementsss:

Star screw driver set

Item: Ball valve ½” Super Asia

UNSPSC: Ball valves

Specifications / Requirementsss:

Ball valve ½” Super Asia

Item: Ball valve ¾” Super Asia

UNSPSC: Ball valves

Specifications / Requirementsss:

Ball valve ¾” Super Asia

Item: Flash Tank Master

UNSPSC: Above ground storage or tankage service

Specifications / Requirementsss:

Flash Tank Master

Item: W.C Indian Best Quality Master

UNSPSC: Washroom sanitation services

Specifications / Requirementsss:

W.C Indian Best Quality Master

Item: P Trap 4" Glazzed

UNSPSC: Fiber straps

Specifications / Requirementsss:

P Trap 4" Glazzed

Item: Wooden Piece kale 7’x4” 1 ½”

UNSPSC: Wooden bar

Specifications / Requirementsss:

Wooden Piece kale 7’x4” 1 ½”

Item: Wooden Piece kale 7’x4” 2 ½”

UNSPSC: Wooden piling

Specifications / Requirementsss:

Wooden Piece kale 7’x4” 2 ½”

Item: Wooden Piece kale 7’x10” x 1 ½ "

UNSPSC: Wooden piling

Specifications / Requirementsss:

Wooden Piece kale 7’x10” x 1 ½ "

Item: Wooden Piece kale 7’x7” 1 ½”

UNSPSC: Wooden piling

Specifications / Requirementsss:

Wooden Piece kale 7’x7” 1 ½”

Item: Wooden kale Piece 7’x3” 1 ½”

UNSPSC: Wooden piling

Specifications / Requirementsss:

Wooden kale Piece 7’x3” 1 ½”

Item: Wooden kale Piece 10’x2 ½” x 1 ¼ ” (22x60)

UNSPSC: Wooden piling

Specifications / Requirementsss:

Wooden kale Piece 10’x2 ½” x 1 ¼ ” (22x60)

Item: Wooden Chockat Complete 80"x42” (3”x4”) kale

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Wooden Chockat Complete 80"x42” (3”x4”) kale

Item: Wooden Solid door 78”x37” 1 ½” Pakistani kale

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Wooden Solid door 78”x37” 1 ½” Pakistani kale

Item: Wooden wire mesh Window 34”x20” x1 ½” Pakistani kale

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Wooden wire mesh Window 34”x20” x1 ½” Pakistani kale

Item: Wooden wire mesh door 78”x37” 1 ½” Pakistani kale

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Wooden wire mesh door 78”x37” 1 ½” Pakistani kale

Item: Wooden Window Complete with glass Pakistani Kale Complete 34"x20"x 1 ½”

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Wooden Window Complete with glass Pakistani Kale Complete 34"x20"x 1 ½”

Item: Wooden Solid door double 78”x44” x 1 ½” Pakistani kale

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Wooden Solid door double 78”x44” x 1 ½” Pakistani kale

Item: Wooden Malaysian Door with ply 78”x37” 1 1/2”

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Wooden Malaysian Door with ply 78”x37” 1 1/2”

Item: Wooden wire mesh window complete 44”x19” x 1.5”

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Wooden wire mesh window complete 44”x19” x 1.5”

Item: Glass window complete 44”x19” x1/2” x 6mm (Window) 1 ½”

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Glass window complete 44”x19” x1/2” x 6mm (Window) 1 ½”

Item: Handle Lock

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Handle Lock

Item: Table Drazz Lock 3/4"

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Table Drazz Lock 3/4"

Item: Handle "4”x5”(30+30)

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Handle "4”x5”(30+30)

Item: Door Hinges 4” Pistol Marka

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Door Hinges 4” Pistol Marka

Item: Tower Bolt 6”x8” 60+60=120

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Tower Bolt 6”x8” 60+60=120

Item: Sliding Bolt 12”

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Sliding Bolt 12”

Item: Door Spring

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Door Spring

Item: Wooden Chockat 80"x42" (3”x4”) with wire mash door Pakistani Kale Complete 78"x37" x 1 ½”

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Wooden Chockat 80"x42" (3”x4”) with wire mash door Pakistani Kale Complete 78"x37" x 1 ½”

Item: Wooden Chockat 80"x42" with solid door Pakistani Kale Complete 80"x38" 1 ½”

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Wooden Chockat 80"x42" with solid door Pakistani Kale Complete 80"x38" 1 ½”

Item: Lamination Sheet Patex 8'x4' x ¾”

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Lamination Sheet Patex 8'x4' x ¾”

Item: Door Closer Japan/China

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Door Closer Japan/China

Item: Glass Cutter (kalam)

UNSPSC: Glass cutters

Specifications / Requirementsss:

Glass Cutter (kalam)

Item: Glue Jarman 1 kg

UNSPSC: Glitter glue

Specifications / Requirementsss:

Glue Jarman 1 kg

Item: Iron File (Raiti) Complete Set with 4 Piece

UNSPSC: Ascorbic acid/iron

Specifications / Requirementsss:

Iron File (Raiti) Complete Set with 4 Piece

Item: Chisel set complete best quality

UNSPSC: Chisel bit

Specifications / Requirementsss:

Chisel set complete best quality

Item: Glander tap san SMT

UNSPSC: Diagnosis of glanders

Specifications / Requirementsss:

Glander tap san SMT

Item: Electrical Hand cutter 7” SMT

UNSPSC: Cutter bar

Specifications / Requirementsss:

Electrical Hand cutter 7” SMT

Item: Bit set (barma)SMT

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Bit set (barma)SMT

Item: Concrete Bit set (barma) SMT

UNSPSC: Cement or concrete posts

Specifications / Requirementsss:

Concrete Bit set (barma) SMT

Item: Utility Knife cutter

UNSPSC: Dough knife

Specifications / Requirementsss:

Utility Knife cutter

Item: Secular blade 10”x12” 6+6=12

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Secular blade 10”x12” 6+6=12

Item: Combination stone

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Combination stone

Item: Pincer (Jamboor) 12”

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Pincer (Jamboor) 12”

Item: Canadian Takora

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Canadian Takora

Item: Tri squire 12” (Goonia)

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Tri squire 12” (Goonia)

Item: Hammer Black 01 kg Clawy Ammer KTC

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Hammer Black 01 kg Clawy Ammer KTC

Item: Flat hammer KTC as per sample

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Flat hammer KTC as per sample

Item: Safety Glass

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Safety Glass

Item: Plier best quality

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Plier best quality

Item: Hand Saw

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Hand Saw

Item: Grinder Machine SMT

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Grinder Machine SMT

Item: Chisel complete Set

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Chisel complete Set

Item: Level 12” + 18" (2+2)

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Level 12” + 18" (2+2)

Item: Hand Planer Complete set best quality

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Hand Planer Complete set best quality

Item: Jack planer (Randa)

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Jack planer (Randa)

Item: Electric Drill SMT

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Electric Drill SMT

Item: Charging Drill Machine SMT

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Charging Drill Machine SMT

Item: Adjustable spanner SMT

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Adjustable spanner SMT

Item: Tin cutter best quality

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Tin cutter best quality

Item: Measurement Tap 12’x24’ 8+8+=16

UNSPSC: Air pollution monitoring or measurement services

Specifications / Requirementsss:

Measurement Tap 12’x24’ 8+8+=16

Item: Screw 4 slotted 12”

UNSPSC: Allen screw

Specifications / Requirementsss:

Screw 4 slotted 12”

Item: Screw driver four way slotted

UNSPSC: Offset screw driver

Specifications / Requirementsss:

Screw driver four way slotted

Item: Screw driver Flat 12”

UNSPSC: Offset screw driver

Specifications / Requirementsss:

Screw driver Flat 12”

Item: Screw driver set complete

UNSPSC: Offset screw driver

Specifications / Requirementsss:

Screw driver set complete

Item: Screw star bit

UNSPSC: Acetabular screws

Specifications / Requirementsss:

Screw star bit

Item: Steel Nail 1”

UNSPSC: Nail or router gauges

Specifications / Requirementsss:

Steel Nail 1”

Item: Steel Nail 2”

UNSPSC: Nail or router gauges

Specifications / Requirementsss:

Steel Nail 2”

Item: Steel Nail 3”

UNSPSC: Nail or router gauges

Specifications / Requirementsss:

Steel Nail 3”

Item: Steel Nail 4”

UNSPSC: Nail or router gauges

Specifications / Requirementsss:

Steel Nail 4”

Item: Steel Nail 1 1/2”

UNSPSC: Nail or router gauges

Specifications / Requirementsss:

Steel Nail 1 1/2”

Item: Nail 1" x 17 No (Head)

UNSPSC: Nail or router gauges

Specifications / Requirementsss:

Nail 1" x 17 No (Head)

Item: Nail 1" x 17 No Top Less

UNSPSC: Nail or router gauges

Specifications / Requirementsss:

Nail 1" x 17 No Top Less

Item: Nail 1" x 14 No (Head)

UNSPSC: Nail or router gauges

Specifications / Requirementsss:

Nail 1" x 14 No (Head)

Item: Nail 1 1/4" x17 No (Head)

UNSPSC: Nail or router gauges

Specifications / Requirementsss:

Nail 1 1/4" x17 No (Head)

Item: Nail 1 1/2" x 17 No Top Less

UNSPSC: Nail or router gauges

Specifications / Requirementsss:

Nail 1 1/2" x 17 No Top Less

Item: Nail 1 1/2" x 14 No (Head)

UNSPSC: Nail or router gauges

Specifications / Requirementsss:

Nail 1 1/2" x 14 No (Head)

Item: Nail 2" x 14 No (Head)

UNSPSC: Nail or router gauges

Specifications / Requirementsss:

Nail 2" x 14 No (Head)

Item: Nail 2" x 15 No Top Less

UNSPSC: Nail or router gauges

Specifications / Requirementsss:

Nail 2" x 15 No Top Less

Item: Nail 3"x14 No (Head)

UNSPSC: Nail or router gauges

Specifications / Requirementsss:

Nail 3"x14 No (Head)

Item: Nail 3"x12 No (Head)

UNSPSC: Nail or router gauges

Specifications / Requirementsss:

Nail 3"x12 No (Head)

Item: Nail 4" x 12 (Head)

UNSPSC: Nail or router gauges

Specifications / Requirementsss:

Nail 4" x 12 (Head)

Item: Black Screw 1 1/2" x 6 No

UNSPSC: Set screws

Specifications / Requirementsss:

Black Screw 1 1/2" x 6 No

Item: Black Screw 1" x 6 No

UNSPSC: Set screws

Specifications / Requirementsss:

Black Screw 1" x 6 No

Item: Black Screw 2 1/2" x 6 No

UNSPSC: Set screws

Specifications / Requirementsss:

Black Screw 2 1/2" x 6 No

Item: Black Screw 3" x 6 No

UNSPSC: Set screws

Specifications / Requirementsss:

Black Screw 3" x 6 No

Item: Black Screw 4" x 8 No

UNSPSC: Set screws

Specifications / Requirementsss:

Black Screw 4" x 8 No

Item: Black Screw 5/8" x 6 No

UNSPSC: Set screws

Specifications / Requirementsss:

Black Screw 5/8" x 6 No

Item: Black Screw 3/4" x 6 No

UNSPSC: Set screws

Specifications / Requirementsss:

Black Screw 3/4" x 6 No

Item: Plimer Machine Blade 24" x 1 1/2" (As per Sample)

UNSPSC: Autopsy knives or blades

Specifications / Requirementsss:

Plimer Machine Blade 24" x 1 1/2" (As per Sample)

Item: Made to order MS pipe bore dia of 10-3/4", with wall thickness of 1/8"

UNSPSC: Pipeline

Specifications / Requirementsss:

Made to order MS pipe bore dia of 10-3/4", with wall thickness of 1/8"

Item: Flange 12 inch diameter, MS 1/2" thick with 12 holes

UNSPSC: Cylinder diameter measuring equipment

Specifications / Requirementsss:

Flange 12 inch diameter, MS 1/2" thick with 12 holes

Item: Flange 10 inch diameter, MS 1/2" thick with 12 holes

UNSPSC: ABS plastic pipe plate flange

Specifications / Requirementsss:

Flange 10 inch diameter, MS 1/2" thick with 12 holes

Item: AC copper Pipe 1/2" original cooper Universal brand/equivalent 18 Gauge

UNSPSC: Commercial copper pipe

Specifications / Requirementsss:

AC copper Pipe 1/2" original cooper Universal brand/equivalent 18 Gauge

Item: AC copper Pipe 1/4" original cooper Universal brand/ equivalent 18 Gauge

UNSPSC: Copper pipe cross

Specifications / Requirementsss:

AC copper Pipe 1/4" original cooper Universal brand/ equivalent 18 Gauge

Item: Gas R 410 USA (13.5 kg cylinder)

UNSPSC: Air or gas tanks or cylinders

Specifications / Requirementsss:

Gas R 410 USA (13.5 kg cylinder)

Item: Fully copper pipe 5/8" Universal brand/equivalent 18 Gauge

UNSPSC: Copper pipe cap

Specifications / Requirementsss:

Fully copper pipe 5/8" Universal brand/equivalent 18 Gauge

Item: Fully copper pipe 3/8" Universal brand/equivalent 18 Gauge

UNSPSC: Copper pipe cross

Specifications / Requirementsss:

Fully copper pipe 3/8" Universal brand/equivalent 18 Gauge

Item: Baby Drill Machine SMT 1-13mm bit size

UNSPSC: Bench drilling machine

Specifications / Requirementsss:

Baby Drill Machine SMT 1-13mm bit size

Item: Baby grinder ingco/total/equivalent 5 inch

UNSPSC: Bench grinder

Specifications / Requirementsss:

Baby grinder ingco/total/equivalent 5 inch

Item: Rotary Compressor 18000 Btu 220V Mitsubishi/equivalent

UNSPSC: Rotary compressors

Specifications / Requirementsss:

Rotary Compressor 18000 Btu 220V Mitsubishi/equivalent

Item: Rotary Compressor 24000 Btu 220V Mitsubishi/equivalent

UNSPSC: Rotary compressors

Specifications / Requirementsss:

Rotary Compressor 24000 Btu 220V Mitsubishi/equivalent

Item: R-134 A gas USA (13.5 kg cylinder)

UNSPSC: Air or gas tanks or cylinders

Specifications / Requirementsss:

R-134 A gas USA (13.5 kg cylinder)

Item: R-22 gas USA (13.5 kg cylinder)

UNSPSC: Air or gas tanks or cylinders

Specifications / Requirementsss:

R-22 gas USA (13.5 kg cylinder)

Item: PPF A/G Cartridge 20" for water filtration plant

UNSPSC: Air filtration or purification equipment maintenance and repair service

Specifications / Requirementsss:

PPF A/G Cartridge 20" for water filtration plant

Item: PPY Imperial Cartridge 20" for water filtration plant

UNSPSC: Water filtration cartridges

Specifications / Requirementsss:

PPY Imperial Cartridge 20" for water filtration plant

Item: Anti-Scallant for water filtration plant

UNSPSC: Air filtration or purification equipment maintenance and repair service

Specifications / Requirementsss:

Anti-Scallant for water filtration plant

Item: Chlorine Dioxide Table Detrain for water filtration plant

UNSPSC: Chlorine Cl

Specifications / Requirementsss:

Chlorine Dioxide Table Detrain for water filtration plant

Item: UV lamp 33" for filtration plant

UNSPSC: Air filtration or purification equipment maintenance and repair service

Specifications / Requirementsss:

UV lamp 33" for filtration plant

Item: Capacitor 60 mfu 220v for AC Amber

UNSPSC: Capacitor tester

Specifications / Requirementsss:

Capacitor 60 mfu 220v for AC Amber

Item: Capacitor 50 mfu 220v for AC Amber

UNSPSC: Capacitor tester

Specifications / Requirementsss:

Capacitor 50 mfu 220v for AC Amber

Item: Capacitor 35 mfu 220v for AC Amber

UNSPSC: Capacitor networks

Specifications / Requirementsss:

Capacitor 35 mfu 220v for AC Amber

Item: GI Nut Bolt Best Quality 5/8” x 4” as per sample

UNSPSC: Bearing nuts

Specifications / Requirementsss:

GI Nut Bolt Best Quality 5/8” x 4” as per sample

Item: RCC Pipe 9" Dia 6 ft length with collar

UNSPSC: ABS plastic pipe adapter

Specifications / Requirementsss:

RCC Pipe 9" Dia 6 ft length with collar

Item: Magnetic contactor relay 220v for ACs

UNSPSC: Magnetic circuit breakers

Specifications / Requirementsss:

Magnetic contactor relay 220v for ACs

Item: Gas Welding rod (copper)

UNSPSC: Gas welding or brazing or cutting apparatus

Specifications / Requirementsss:

Gas Welding rod (copper)

Item: Flare Nut 1/2" brass high quality for AC as per sample

UNSPSC: Flares

Specifications / Requirementsss:

Flare Nut 1/2" brass high quality for AC as per sample

Item: Flare Nut 1/4" brass high quality for AC as per sample

UNSPSC: Flares

Specifications / Requirementsss:

Flare Nut 1/4" brass high quality for AC as per sample

Item: Flare Nut 5/8" brass high quality for AC as per sample

UNSPSC: Flares

Specifications / Requirementsss:

Flare Nut 5/8" brass high quality for AC as per sample

Item: Flare Nut 3/8" brass high quality for AC as per sample

UNSPSC: Flares

Specifications / Requirementsss:

Flare Nut 3/8" brass high quality for AC as per sample

Item: Union 1/2" for AC best quality as per sample

UNSPSC: ABS plastic pipe union

Specifications / Requirementsss:

Union 1/2" for AC best quality as per sample

Item: Union 1/4" for AC best quality as per sample

UNSPSC: ABS plastic pipe union

Specifications / Requirementsss:

Union 1/4" for AC best quality as per sample

Item: Union 5/8" for AC best quality as per sample

UNSPSC: ABS plastic pipe union

Specifications / Requirementsss:

Union 5/8" for AC best quality as per sample

Item: Union 3/8" for AC best quality as per sample

UNSPSC: ABS plastic pipe union

Specifications / Requirementsss:

Union 3/8" for AC best quality as per sample

Item: Screw driver set best quality ingco/ total/ equivalent 6 pieces

UNSPSC: Offset screw driver

Specifications / Requirementsss:

Screw driver set best quality ingco/ total/ equivalent 6 pieces

Item: Plier ingco/equivalent

UNSPSC: Pliers set

Specifications / Requirementsss:

Plier ingco/equivalent

Item: Cutter nose plier ingco/total/equivalent

UNSPSC: Cutters

Specifications / Requirementsss:

Cutter nose plier ingco/total/equivalent

Item: Stain less steel hinges for aluminum door and brand (China)

UNSPSC: Alloy steel/stainless steel check valve

Specifications / Requirementsss:

Stain less steel hinges for aluminum door and brand (China)

Item: Aluminum door closer Best Quality

UNSPSC: Door closers

Specifications / Requirementsss:

Aluminum door closer Best Quality

Item: Aluminum door lock Best Quality

UNSPSC: Door closers

Specifications / Requirementsss:

Aluminum door lock Best Quality

Item: Aluminum blind rivets Different sizes (4-8mm die x 16.0mm) length

UNSPSC: Blind rivets

Specifications / Requirementsss:

Aluminum blind rivets Different sizes (4-8mm die x 16.0mm) length

Item: Welding rod 10 No Tiger/equivalent as approved

UNSPSC: Welding rod

Specifications / Requirementsss:

Welding rod 10 No Tiger/equivalent as approved

Item: Die tap set( 3mm to 12mm) China

UNSPSC: Tape drives

Specifications / Requirementsss:

Die tap set( 3mm to 12mm) China

Item: Combination tools set original INGCO German/japan (142 piece)

UNSPSC: Production logging tools spare parts and accessories

Specifications / Requirementsss:

Combination tools set original INGCO German/japan (142 piece)

Item: Hilti drill 500w SMT 6220

UNSPSC: Acoustic measurement when drilling services

Specifications / Requirementsss:

Hilti drill 500w SMT 6220

Item: drill bit set (1mm to 13mm) Darmit

UNSPSC: Acoustic measurement when drilling services

Specifications / Requirementsss:

drill bit set (1mm to 13mm) Darmit

Item: Oil Filter (Perkins 2654403)

UNSPSC: Oil filters

Specifications / Requirementsss:

Oil Filter (Perkins 2654403)

Item: Fuel Filter (Perkins 26561113 )

UNSPSC: Fuel filters

Specifications / Requirementsss:

Fuel Filter (Perkins 26561113 )

Item: Oil Filter Fled Guard (Lf691A)

UNSPSC: Oil filters

Specifications / Requirementsss:

Oil Filter Fled Guard (Lf691A)

Item: Fuel Filter Fled Guard (FF4070)

UNSPSC: Fuel filters

Specifications / Requirementsss:

Fuel Filter Fled Guard (FF4070)

Item: Air filter for Dorman Generator 300KVA as per sample

UNSPSC: Air filters

Specifications / Requirementsss:

Air filter for Dorman Generator 300KVA as per sample

Item: Compressor rotary type 24000 BTU 220V Mitsubishi/equivalent as approved by client

UNSPSC: Air compressor rental and maintenance service

Specifications / Requirementsss:

Compressor rotary type 24000 BTU 220V Mitsubishi/equivalent as approved by client

Item: Charging Drill Machine (Medium Size) SMT

UNSPSC: Acoustic measurement when drilling services

Specifications / Requirementsss:

Charging Drill Machine (Medium Size) SMT

Item: Cutting Disc 7 Inch for hand grinder (SMT Company/equivalent )

UNSPSC: Aheli amarillo seed or cutting

Specifications / Requirementsss:

Cutting Disc 7 Inch for hand grinder (SMT Company/equivalent )

Item: Baby Grinder Cutting Disc 5 Inch Thick MST/equivalent

UNSPSC: Bench grinder

Specifications / Requirementsss:

Baby Grinder Cutting Disc 5 Inch Thick MST/equivalent

Item: Grinding Disc 1/2" x 4" (SMT Company/equivalent)

UNSPSC: Centerless grinding machine

Specifications / Requirementsss:

Grinding Disc 1/2" x 4" (SMT Company/equivalent)

Item: Bass Grinder Cutting Disc 1"x12" (SMT Company/ equivalent)

UNSPSC: Bench grinder

Specifications / Requirementsss:

Bass Grinder Cutting Disc 1"x12" (SMT Company/ equivalent)

Item: Welding Lead wire (copper 16mm)

UNSPSC: Arc welding services

Specifications / Requirementsss:

Welding Lead wire (copper 16mm)

Item: Gas kit rubber sheet 8mm

UNSPSC: Sharpening stones or tools or kits

Specifications / Requirementsss:

Gas kit rubber sheet 8mm

Item: Key set SMT

UNSPSC: Key seating machine

Specifications / Requirementsss:

Key set SMT

Item: Gotti set SMT

UNSPSC: Anatomy charts or sets

Specifications / Requirementsss:

Gotti set SMT

Item: AC service gun complete set best quality SMT

UNSPSC: Air conditioning installation or maintenance or repair service

Specifications / Requirementsss:

AC service gun complete set best quality SMT

Item: Wrapping Tap for ACs

UNSPSC: Gift wrapping paper or bags or boxes

Specifications / Requirementsss:

Wrapping Tap for ACs

Item: Self-type Screw 3/4 inch

UNSPSC: Augment connection screws

Specifications / Requirementsss:

Self-type Screw 3/4 inch

Item: Wire 3/0.029 Single Core Copper (Newage/Pakistan) full gage 1.5mm (Red+Black) 15+15=30

UNSPSC: Copper wire

Specifications / Requirementsss:

Wire 3/0.029 Single Core Copper (Newage/Pakistan) full gage 1.5mm (Red+Black) 15+15=30

Item: Wire 7/0.029 Single Core Copper (Newage/Pakistan) full gage 2.5mm (Red+Black)(10+10)

UNSPSC: Copper wire

Specifications / Requirementsss:

Wire 7/0.029 Single Core Copper (Newage/Pakistan) full gage 2.5mm (Red+Black)(10+10)

Item: Wire 3/0.029 Two Core Copper (Newage/Pakistan) full gage 1.5mm (1+1)

UNSPSC: Copper wire

Specifications / Requirementsss:

Wire 3/0.029 Two Core Copper (Newage/Pakistan) full gage 1.5mm (1+1)

Item: Wire 7/0.029 Two Core Copper (Newage/Pakistan) Full gage2.5mm (1+1)

UNSPSC: Copper wire

Specifications / Requirementsss:

Wire 7/0.029 Two Core Copper (Newage/Pakistan) Full gage2.5mm (1+1)

Item: Wire 7/0.036 Two Core Copper (Newage/Pakistan) Full gage 4mm (2+1)

UNSPSC: Copper wire

Specifications / Requirementsss:

Wire 7/0.036 Two Core Copper (Newage/Pakistan) Full gage 4mm (2+1)

Item: Light Plug (13 Amp) Madina/Hero equivalent

UNSPSC: Air purification and LED lighting fixture

Specifications / Requirementsss:

Light Plug (13 Amp) Madina/Hero equivalent

Item: Power Plug (20 Amp) Hero/Madina equivalent

UNSPSC: Auxiliary power unit systems APUs

Specifications / Requirementsss:

Power Plug (20 Amp) Hero/Madina equivalent

Item: Capacitor (3.5uf) Best Quality

UNSPSC: Capacitor tester

Specifications / Requirementsss:

Capacitor (3.5uf) Best Quality

Item: Switch Piano Type (Hero/equivalent)

UNSPSC: Switch part or accessory

Specifications / Requirementsss:

Switch Piano Type (Hero/equivalent)

Item: Check Valve (3”) Brass Best Quality

UNSPSC: Control valves

Specifications / Requirementsss:

Check Valve (3”) Brass Best Quality

Item: Bulb Mercury 250 Watt (Philips/Osram) Original

UNSPSC: Pipette bulbs

Specifications / Requirementsss:

Bulb Mercury 250 Watt (Philips/Osram) Original

Item: Choke (Mercury) 250 Watt Philips Original Copper

UNSPSC: Copper

Specifications / Requirementsss:

Choke (Mercury) 250 Watt Philips Original Copper

Item: Socket Piano Type(Hero/equivalent)

UNSPSC: Sockets

Specifications / Requirementsss:

Socket Piano Type(Hero/equivalent)

Item: PVC Duct ¾” Dura

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

PVC Duct ¾” Dura

Item: Insulation Tapes Osaka

UNSPSC: Drafting dots or tapes

Specifications / Requirementsss:

Insulation Tapes Osaka

Item: Link Unit (11kv) H.T China complete set

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Link Unit (11kv) H.T China complete set

Item: Circuit Breaker (32A) 2 Pole (Terasaki/ equivalent)

UNSPSC: Circuit breakers

Specifications / Requirementsss:

Circuit Breaker (32A) 2 Pole (Terasaki/ equivalent)

Item: PVC box 4x4 Madina (single hole)

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

PVC box 4x4 Madina (single hole)

Item: Wire 40/0.076 2 core Flexible Fast/GM

UNSPSC: Copper wire

Specifications / Requirementsss:

Wire 40/0.076 2 core Flexible Fast/GM

Item: Steel Nail (1”+ 1½” ) (15+15)

UNSPSC: Wire nails

Specifications / Requirementsss:

Steel Nail (1”+ 1½” ) (15+15)

Item: Steel (1 1/2''+ 2 ½”) (15+15) 8No

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Steel (1 1/2''+ 2 ½”) (15+15) 8No

Item: HT (High tension) Rod for 11 KV lines 10 ft 2 piece total 20 ft (IESCO approved)

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

HT (High tension) Rod for 11 KV lines 10 ft 2 piece total 20 ft (IESCO approved)

Item: Wire 7/0.044 single core copper (Newage/Pakistan) full gage (6mm)

UNSPSC: Copper wire

Specifications / Requirementsss:

Wire 7/0.044 single core copper (Newage/Pakistan) full gage (6mm)

Item: Wire 7/0.064 single core copper (Newage/Pakistan) full gage (16mm)

UNSPSC: Copper wire

Specifications / Requirementsss:

Wire 7/0.064 single core copper (Newage/Pakistan) full gage (16mm)

Item: Dimmer (Pak/Yunus/Royal)

UNSPSC: Dimmers and accessories

Specifications / Requirementsss:

Dimmer (Pak/Yunus/Royal)

Item: Light Plug box (4"X4") china fitting

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Light Plug box (4"X4") china fitting

Item: Main Switch Iron Clair (100amp) T/P (Heavy duty)

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Main Switch Iron Clair (100amp) T/P (Heavy duty)

Item: Retched set (gotti panna)(72-77) pieces INGCO or equivalent original German/japan

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Retched set (gotti panna)(72-77) pieces INGCO or equivalent original German/japan

Item: Main Switch S/P (30A) Iron Clair large size, best quality

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Main Switch S/P (30A) Iron Clair large size, best quality

Item: PVC/Back o lite sheet (9'X11") 6 hole

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

PVC/Back o lite sheet (9'X11") 6 hole

Item: PVC/Back o lite sheet (4"X4") (2 hole + 1 hole ) (25+25)

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

PVC/Back o lite sheet (4"X4") (2 hole + 1 hole ) (25+25)

Item: PVC Socket (3/4") Polo/Dura/Beta

UNSPSC: Point socket

Specifications / Requirementsss:

PVC Socket (3/4") Polo/Dura/Beta

Item: PVC Bend (3/4")

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

PVC Bend (3/4")

Item: Three Pin Light shoe (10-13Amp) Hero/PPI/equivalent

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Three Pin Light shoe (10-13Amp) Hero/PPI/equivalent

Item: Three Pin Power shoe (15-20Amp) Hero/PPI/Equivalent

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Three Pin Power shoe (15-20Amp) Hero/PPI/Equivalent

Item: Line man Gloves (lather+ Rubber) (Wapda Approved)

UNSPSC: Electric wireline manpower services

Specifications / Requirementsss:

Line man Gloves (lather+ Rubber) (Wapda Approved)

Item: Line man Belt (lather) Heavy Duty IESO / Wapda Approved

UNSPSC: Belts or suspenders

Specifications / Requirementsss:

Line man Belt (lather) Heavy Duty IESO / Wapda Approved

Item: Line man Shoes Service/Bata (7No, 8No or 9 No)2+3+1

UNSPSC: Mills or burning shoes

Specifications / Requirementsss:

Line man Shoes Service/Bata (7No, 8No or 9 No)2+3+1

Item: Long Shoes Rubber (8 No, 9 No) Best Quality

UNSPSC: Safety shoes

Specifications / Requirementsss:

Long Shoes Rubber (8 No, 9 No) Best Quality

Item: HT Tester with fibber rod 4-5 feet for 11KV lines Complete Wapda approved

UNSPSC: Aggregate specific gravity tester

Specifications / Requirementsss:

HT Tester with fibber rod 4-5 feet for 11KV lines Complete Wapda approved

Item: PVC Clips (6 No +8No) (10+10) 100 pieces in each packet

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

PVC Clips (6 No +8No) (10+10) 100 pieces in each packet

Item: Knife Heavy Duty folding 3" with wooden handle

UNSPSC: Dough knife

Specifications / Requirementsss:

Knife Heavy Duty folding 3" with wooden handle

Item: Paper Cutter with Heavy Duty Blade

UNSPSC: Cutters

Specifications / Requirementsss:

Paper Cutter with Heavy Duty Blade

Item: Tester 220 Volt L.T Best Quality White

UNSPSC: Brake tester

Specifications / Requirementsss:

Tester 220 Volt L.T Best Quality White

Item: Clamp Meter UNI-T (202 A+) Digital with leads

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Clamp Meter UNI-T (202 A+) Digital with leads

Item: Cutter Plier C.Mart A0075.240 Original or as per sample

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Cutter Plier C.Mart A0075.240 Original or as per sample

Item: Plier 8" imported best quality

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Plier 8" imported best quality

Item: Screw driver 8" flat 2 way Imported Best quality

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Screw driver 8" flat 2 way Imported Best quality

Item: Screw driver 8" (Round) 4 way Imported Best quality

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Screw driver 8" (Round) 4 way Imported Best quality

Item: Circuit Breaker (100A) 3 Pole (Terasaki/equivalent)

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Circuit Breaker (100A) 3 Pole (Terasaki/equivalent)

Item: Rawal Bolt ( 2 1/2" x 3/6") Best Quality

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Rawal Bolt ( 2 1/2" x 3/6") Best Quality

Item: LED Ceiling light 18 watt 6" Size Osaka/equivalent warm

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

LED Ceiling light 18 watt 6" Size Osaka/equivalent warm

Item: Choke 125watt Phillips/equivalent original copper

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Choke 125watt Phillips/equivalent original copper

Item: Mercury bulb 125watt Phillips/equivalent 3 pin

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Mercury bulb 125watt Phillips/equivalent 3 pin

Item: Torch full beam sogo japan/equivalent Model JPN-8880

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Torch full beam sogo japan/equivalent Model JPN-8880

Item: Power Plug Box (4"x4") China Fitting

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Power Plug Box (4"x4") China Fitting

Item: Line Man Helmet Plastic / Fiber Wapda Approved different sizes as per requirement or standard size

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Line Man Helmet Plastic / Fiber Wapda Approved different sizes as per requirement or standard size

Item: Uniform for Electric Staff (Trouser + Shirt) Navy Blue Color imported fabric (6+2) pocket + 2 tags on shirt (electrical staff) front side, NIH on back side different sizes, size will be provided by MSD on the spot or as per sample

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Uniform for Electric Staff (Trouser + Shirt) Navy Blue Color imported fabric (6+2) pocket + 2 tags on shirt (electrical staff) front side, NIH on back side different sizes, size will be provided by MSD on the spot or as per sample

Item: Tool Bag Para Shoot/ Best Material 03 pocket (15" x 15") with hanging belt

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Tool Bag Para Shoot/ Best Material 03 pocket (15" x 15") with hanging belt

Item: Holder 3 Pin Back O Lite Best Quality (Cooper Pins)

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Holder 3 Pin Back O Lite Best Quality (Cooper Pins)

Item: PVC Box 8"x10" Madina (8 hole)

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

PVC Box 8"x10" Madina (8 hole)

Item: PVC Box 7"x4" Madina (5 hole)

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

PVC Box 7"x4" Madina (5 hole)

Item: PVC Pipe 3/4" Madina (Polo / Beta / Adam jee

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

PVC Pipe 3/4" Madina (Polo / Beta / Adam jee

Item: Power Plug 20 AMP (Multi /Bush /Madina) or equivalent

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Power Plug 20 AMP (Multi /Bush /Madina) or equivalent

Item: Wooden Screw 1"+ 1 1//2" + 2" + 2 1/2" (10+20+10+20) 60 Box

UNSPSC: Set screws

Specifications / Requirementsss:

Wooden Screw 1"+ 1 1//2" + 2" + 2 1/2" (10+20+10+20) 60 Box

Item: Screw Driver (6"+8") Multi Flat + round combined 3+3 imported

UNSPSC: Offset screw driver

Specifications / Requirementsss:

Screw Driver (6"+8") Multi Flat + round combined 3+3 imported

Item: Line gauge (Imperial Single)

UNSPSC: Jaw exercise equipments

Specifications / Requirementsss:

Line gauge (Imperial Single)

Item: Plaring tool set complete

UNSPSC: Pneumatic tool set

Specifications / Requirementsss:

Plaring tool set complete

Item: Clamp Meter (AC+ DC) Digital

UNSPSC: Monitor or meter accessories

Specifications / Requirementsss:

Clamp Meter (AC+ DC) Digital

Item: Adjustable Warne 12"

UNSPSC: Jaw exercise equipments

Specifications / Requirementsss:

Adjustable Warne 12"

Item: Holesaa (Hole) 4"

UNSPSC: Jaw exercise equipments

Specifications / Requirementsss:

Holesaa (Hole) 4"

Item: Player Best Quality

UNSPSC: Measuring exercise equipments

Specifications / Requirementsss:

Player Best Quality

Item: Screw Driver Complete Set

UNSPSC: Offset screw driver

Specifications / Requirementsss:

Screw Driver Complete Set

Item: Gass Charging Lead 04 inverter Ac + 4 Manual AC (4+4=8)

UNSPSC: Degassing service

Specifications / Requirementsss:

Gass Charging Lead 04 inverter Ac + 4 Manual AC (4+4=8)

Item: Wire 110/76 (Cooper) 3 Core

UNSPSC: Copper wire

Specifications / Requirementsss:

Wire 110/76 (Cooper) 3 Core

Item: L. Key Sets Best Quality

UNSPSC: Key seating machine

Specifications / Requirementsss:

L. Key Sets Best Quality

Item: Ring + Pana combination complete set

UNSPSC: Measuring exercise equipments

Specifications / Requirementsss:

Ring + Pana combination complete set

Item: Rings keys set 6mm to 24mm

UNSPSC: Keys

Specifications / Requirementsss:

Rings keys set 6mm to 24mm

Item: Ring Panna Set 6mm to 24mm

UNSPSC: Acetabular rings

Specifications / Requirementsss:

Ring Panna Set 6mm to 24mm

Item: Support screw driver(Hoteche)

UNSPSC: Offset screw driver

Specifications / Requirementsss:

Support screw driver(Hoteche)

Item: Building Rod Tiger or equivalent as approved

UNSPSC: Abortion of products of conception, abortifacient, via natural or artificial opening

Specifications / Requirementsss:

Building Rod Tiger or equivalent as approved

Item: Safety Screen use for Welding

UNSPSC: Anti-slip safety products

Specifications / Requirementsss:

Safety Screen use for Welding

Item: Safety Glasses black use for welding

UNSPSC: Safety glasses

Specifications / Requirementsss:

Safety Glasses black use for welding

Item: Safety Gluffs use for welding

UNSPSC: Anti-slip safety products

Specifications / Requirementsss:

Safety Gluffs use for welding

Item: Safety shoes 8 No use for welding

UNSPSC: Safety shoes

Specifications / Requirementsss:

Safety shoes 8 No use for welding

Item: Grease High Temperature

UNSPSC: Grease

Specifications / Requirementsss:

Grease High Temperature

Item: Drill Machine hilti heavy duty with bit Complete set Hitachi SMT /ingco/ Equivalent

UNSPSC: Brazed drill

Specifications / Requirementsss:

Drill Machine hilti heavy duty with bit Complete set Hitachi SMT /ingco/ Equivalent

Item: Steel Nail 1 inch best quality

UNSPSC: Finishing nails

Specifications / Requirementsss:

Steel Nail 1 inch best quality

Item: Emulsion Paintex ICI ash white

UNSPSC: Emulsions

Specifications / Requirementsss:

Emulsion Paintex ICI ash white

Item: Enamel Dulux ICI ash white

UNSPSC: Enamel paints

Specifications / Requirementsss:

Enamel Dulux ICI ash white

Item: Enamel Dulux ICI Light Grey

UNSPSC: Enamel paints

Specifications / Requirementsss:

Enamel Dulux ICI Light Grey

Item: Acrylic Paint nippon/paintex/ equivalent best quality.

UNSPSC: Acrylic paints

Specifications / Requirementsss:

Acrylic Paint nippon/paintex/ equivalent best quality.

Item: Emulsion Ruler with rod Captain + Tray

UNSPSC: Emulsions

Specifications / Requirementsss:

Emulsion Ruler with rod Captain + Tray

Item: Enamel Ruler with rod Captain + Tray

UNSPSC: Rulers

Specifications / Requirementsss:

Enamel Ruler with rod Captain + Tray

Item: West pipe best quaility

UNSPSC: Pipeline

Specifications / Requirementsss:

West pipe best quaility

Item: West Cup best quaility

UNSPSC: East west cooperation services

Specifications / Requirementsss:

West Cup best quaility

Item: P.P.R Socket 25mm 1/2 (Master) PN-20

UNSPSC: Point socket

Specifications / Requirementsss:

P.P.R Socket 25mm 1/2 (Master) PN-20

Item: P.P.R Elbow 25mm x 1/2 (Master) PN-20

UNSPSC: ABS plastic pipe elbow

Specifications / Requirementsss:

P.P.R Elbow 25mm x 1/2 (Master) PN-20

Item: Bath Room Accessories complete set (Master)

UNSPSC: Kitchen and bathroom remodeling service

Specifications / Requirementsss:

Bath Room Accessories complete set (Master)

Item: GI Nipple 1/2

UNSPSC: ABS plastic pipe nipple

Specifications / Requirementsss:

GI Nipple 1/2

Item: Tee Cock Faisal

UNSPSC: ABS plastic pipe tee

Specifications / Requirementsss:

Tee Cock Faisal

Item: Looking Mirror (2’x1-1/2’)

UNSPSC: Bathroom or toilet mirror

Specifications / Requirementsss:

Looking Mirror (2’x1-1/2’)

Item: Flush Tank Golden/master/equivalent as approved by client

UNSPSC: Above ground storage or tankage service

Specifications / Requirementsss:

Flush Tank Golden/master/equivalent as approved by client

Item: Stove Nasgas/Super Asia five burner

UNSPSC: Heating stoves

Specifications / Requirementsss:

Stove Nasgas/Super Asia five burner

Item: Hockey Pipe best quality

UNSPSC: Pipeline

Specifications / Requirementsss:

Hockey Pipe best quality

Item: Screw Black 1 1/2x8 No

UNSPSC: Aircraft drive shafts power take offs or screw jacks

Specifications / Requirementsss:

Screw Black 1 1/2x8 No

Item: Lamination Sheet (Patex) (8'x4'x3/4")

UNSPSC: Lamination film

Specifications / Requirementsss:

Lamination Sheet (Patex) (8'x4'x3/4")

Item: Wire mash 6’x3’ Islamabad

UNSPSC: Wire mesh sheet

Specifications / Requirementsss:

Wire mash 6’x3’ Islamabad

Item: PVC Gola 16mm silver

UNSPSC: PVC garage door

Specifications / Requirementsss:

PVC Gola 16mm silver

Item: Elfie jimsa (Big)

UNSPSC: Jaw exercise equipments

Specifications / Requirementsss:

Elfie jimsa (Big)

Item: Wooden Lasani sheet (8’x4’ x 1/4”)

UNSPSC: Wooden framework

Specifications / Requirementsss:

Wooden Lasani sheet (8’x4’ x 1/4”)

Item: Wooden molding Gola (8’x 3/4’’ x 3/4’’)

UNSPSC: Rough carpentry service

Specifications / Requirementsss:

Wooden molding Gola (8’x 3/4’’ x 3/4’’)

Item: Wooden pieces (7’ x 1 1/2” x 3”)

UNSPSC: Rough carpentry service

Specifications / Requirementsss:

Wooden pieces (7’ x 1 1/2” x 3”)

Item: P.P.R Elbow ¾ 32mm Master PN-20

UNSPSC: ABS plastic pipe elbow

Specifications / Requirementsss:

P.P.R Elbow ¾ 32mm Master PN-20

Item: Double bib cock Faisal

UNSPSC: Bib

Specifications / Requirementsss:

Double bib cock Faisal

Item: Wire mash 6’x4’

UNSPSC: Cable or wire lug

Specifications / Requirementsss:

Wire mash 6’x4’

Item: Wooden kale wire mesh +Door 37”x78” 1 ½”

UNSPSC: Rough carpentry service

Specifications / Requirementsss:

Wooden kale wire mesh +Door 37”x78” 1 ½”

Item: Glass 4’x4’ (6mm or 5mm) best quality

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Glass 4’x4’ (6mm or 5mm) best quality

Item: Sliding Bolt 8” pistol

UNSPSC: Parts of guns or pistols

Specifications / Requirementsss:

Sliding Bolt 8” pistol

Item: Screw Black 5/8’ x 6

UNSPSC: Allen screw

Specifications / Requirementsss:

Screw Black 5/8’ x 6

Item: Lassani sheets size (8’x4’x3/4’)

UNSPSC: Finish carpentry service

Specifications / Requirementsss:

Lassani sheets size (8’x4’x3/4’)

Item: Wooden Kale Piece size 2 ½” x 4” x 10’

UNSPSC: Rough carpentry service

Specifications / Requirementsss:

Wooden Kale Piece size 2 ½” x 4” x 10’

Item: Press Board size 8’x4’ x 6mm

UNSPSC: Rough carpentry service

Specifications / Requirementsss:

Press Board size 8’x4’ x 6mm

Item: Patti Kabza size 6’

UNSPSC: Rough carpentry service

Specifications / Requirementsss:

Patti Kabza size 6’

Item: Door Handle rod size 6”

UNSPSC: Rough carpentry service

Specifications / Requirementsss:

Door Handle rod size 6”

Item: Catcher Plastic

UNSPSC: Rough carpentry service

Specifications / Requirementsss:

Catcher Plastic

Item: Screw Black ¾’ x 6 No

UNSPSC: Rough carpentry service

Specifications / Requirementsss:

Screw Black ¾’ x 6 No

Item: Cooking Range Three Burner Super Asia/Nasgas Complete (Best Quality)

UNSPSC: Cooking machinery

Specifications / Requirementsss:

Cooking Range Three Burner Super Asia/Nasgas Complete (Best Quality)

Item: Electric Geyser 35 Gallon Super Asia/ Nas Gas with Thermostat (Complete

UNSPSC: Electrical equipment maintenance and repair service

Specifications / Requirementsss:

Electric Geyser 35 Gallon Super Asia/ Nas Gas with Thermostat (Complete

Price Schedule

For Individual Items

# Item Title Quantity Unit Price (PKR) Total Price (PKR) Delivery Location Delivery Period / Year Country of Origin
1
2
For Lots
# Lot Title Total Lot Price (PKR) Country of Origin
1 [Lot 1 Title]

📑 General Conditions of Contract (GCC)

Purchase of Civil Items etc. for Maintenance Sub Division of NIH

Published on: Wednesday, October 21, 2026 09:50 AM

Ref# : P152517
QR Code

A. General

1. Definitions

1.1 Unless the context otherwise requires, the following terms whenever used in this Contract shall have the same meaning and shall be interpreted as indicated
  1. “Applicable Law” means the laws and any other instruments having the force of law in the Government’s Country, or in such other country as may be specified in the Special Conditions of the Contract (SC), as they may be issued and in force from time to time;
  2. The “Arbitrator” is the person appointed with mutual consent of both the parties, to resolve contractual disputes as provided for in the General Conditions of the Contract GCC Clause 35 hereunder.
  3. “Authority” means Public Procurement Regulatory Authority.
  4. The “Commencement Date” is the date when the Supplier shall commence execution of the contract as specified in the SCC.
  5. “Completion date” means the date of completion of the Contract by the Bidder as certified by the Procuring Agency.
  6. “Procuring Agency” means:-
    1. any Ministry, Division, Department or any Office of the Government;
    2. any authority, corporation, body or organization established by or under a Law or which is owned or controlled by the Government;.
  7. “The Contract” means an agreement enforceable by law;
  8. “The Contract Price” means the price payable to the Bidder under the Contract for the full and proper performance of its contractual obligations;
  9. “Ancillary Services” means those services ancillary to the provision  of Goods, such as transportation and insurance, and any other incidental services, such as installation, commissioning, provision of technical assistance, training, and other such obligations of the Bidder covered under the  Contract;
  10. “GCC” means the General Conditions of Contract contained in this section;
  11. “SCC” means the Special Conditions of Contract by which the GCC may be amended or supplemented;
  12. “Day” means calendar day unless indicated otherwise.
  13. “Defective Goods” are those goods which are below standards, requirements or specifications stated by the Contract.
  14. “Delivery” means the transfer of the goods from the supplier equipment, machinery, and /or other materials which the Supplier is required to supply to the Procuring Agency under Contract.
  15. “Effective Date” means the date on which this Contract comes into force and effect.
  16. “Force Majeure” means an unforeseeable event which is beyond reasonable control of either Party and which makes a Party’s performance of its obligations under the Contract impossible or so impractical as to be considered     impossible under the circumstances. 

    For the purposes of this Contract, “Force Majeure” means an event which is beyond the reasonable control of a Party, is not foreseeable, is unavoidable, and its origin is not due to negligence or lack of care on the part of a Party, and which makes a Party’s performance of its obligations hereunder impossible or so impractical as reasonably to be considered impossible in the circumstances. and includes, but is not limited to, war, riots, civil disorder, earthquake, fire, explosion, storm, flood, epidemics, or other adverse weather conditions, strikes, lockouts or other industrial action (except where such strikes, lockouts or other industrial action are within the power of the Party invoking Force Majeure to prevent), confiscation or any other action by Government agencies.

  17. The Bidder” means the individual or corporate body whose Bids to provide the Goods has been accepted by the Procuring Agency;
  18. “The Project Site,” where applicable, means the place or places named in Bids Data Sheet and technical Specifications;
  19. “Government” means the Government of Pakistan;
  20. “Subcontractor” means any entity to which the Bidder subcontracts any part of the Goods.
  21.  The “Services” means the work to be performed by the Bidder pursuant to this Contract and as prescribed in the Specifications and Schedule of Activities included in the Bidder’s Bids;
  22. “Party” means the Procuring Agency or the Bidder, as the case may be, and “Parties” means both of them;
  23. “Foreign Currency” means any currency other than the currency of the country of the Procuring Agency;
  24. “Completion Date” means the date of completion of the contract by the Bidder as certified by the Procuring Agency;
  25.  “In Writing” means communicated in written form with proof of receipt;
  26. “Local Currency” means the currency of Pakistan;
  27. “Origin” means the place where the Goods were mined, grown, or produced or from which the Services are supplied. Goods are produced when, through manufacturing, processing, or substantial and major assembly of components, a commercially recognized new produce results that is substantially different in basic characteristics or in purpose or utility from its components.
  28. “Specification” means the Specification of the Goods and performance of incidental services in accordance with the relevant standards included in the Contract and any modification or addition made or approved by the Procuring Agency.
  29. “Procuring Agency” means: -
    any Ministry, Division, Department or any Office of the Federal Government;
    any authority, corporation, body or organization established by or under a Federal Law or which is owned or controlled by the Federal Government;

2. Application and Interpretation

2.1 These General Conditions shall apply to the extent that they are not superseded by provisions of other parts of the Contract.

2.2 In interpreting these Conditions of Contract headings and marginal notes are used for convenience only and shall not affect  their interpretations unless specifically stated; references to singular include the plural and vice versa; and masculine include the feminine. Words have their ordinary meaning  under the   language of the Contract unless specifically defined.

3. Applicable Law

3.1 The contract shall be governed and interpreted in accordance with the laws of Pakistan, unless otherwise specified in SCC.

4. Governing Language

4.1 The Contract as well as all correspondence and documents relating to the Contract exchanged between the Bidder and the Procuring Agency, shall be written in the English language unless otherwise stated in the SCC.  Supporting documents and printed literature that are part of the Contract may be in another language provided these are accompanied by an accurate translation of the relevant passages in English, in which case, for purposes of interpretation of the Contract, this translation shall govern.

5. Notices

5.1 Any notice, request, or consent made pursuant to this Contract shall be in writing and shall be deemed to have been made when delivered in person to an authorized representative of the Party to whom the communication is addressed, or when sent by registered mail, telex, telegram, or facsimile to such Party at the address specified in the SCC.

6. Standard

6.1 The Goods supplied under this Contract shall conform to the standards mentioned in the Technical Specifications, and, when no applicable standard is mentioned, the American Standards (such as ACI, IEEE, ASME, etc.) or the Pakistani standards such as PSQCA Such standards shall be the latest issued by the concerned institution.

7. Delivery/Location

7.1 The Goods shall be delivered to such locations as the Procuring Agency may approve and as specified in SCC.

8. Authorized Representatives / Authority of Member in charge

8.1 Any action required or permitted to be taken, and any document required or permitted to be executed, under this Contract by the Procuring Agency or the Bidder may be taken or executed by the officials specified in the SCC.

B. Commencement, Completion, Modification, and Termination of Contract

8. Effectiveness of Contract

8.1 This Contract shall come into effect on the date the Contract is signed by both parties and such other later date as may be stated in the SCC.

9. Commencement of the Contract

9.1 The Bidder shall confirm availability of Key Experts and begin carrying out the Services not later than the number of days after the Effective Date specified in the SCC.

10. Program

10.1 Before commencement of the Contract, the Bidder shall submit to the Procuring Agency for approval a Program showing the general methods, arrangements, order and timing for all activities. The Services shall be carried out in accordance with the approved Program as updated.

11. Starting Date/Expiration Date

11.1 The Bidder shall start carrying out the Services Five (05) days after the date the Contract becomes effective, or at such other date as may be specified in the SCC.

11.2 Unless terminated earlier pursuant to Clause GCC 16 hereof, this Contract shall expire at the end of such time period after the Effective Date as specified in the SCC.

12. Entire Agreement

12.1 This Contract contains all covenants, stipulations and provisions agreed by the Parties.  No agent or representative of either Party has authority to make, and the Parties shall not be bound by or be liable for, any statement, representation, promise or agreement not set forth herein.

13. Modification

13.1 Any modification or variation of the terms and conditions of this Contract, including any modification or variation of the scope, may only be made by written agreement between the Parties. However, each Party shall give due consideration to any Bids for modification or variation made by the other Party.

13.2 In cases of any modifications or variations, the prior written consent of the Procuring Agency is required.

14. Force Majeure

14.1 Definition

For the purposes of this Contract, “Force Majeure” means an event which is beyond the reasonable control of a Party and which makes a Party’s performance of its obligations under the Contract impossible or so impractical as to be considered impossible under the circumstances.

14.2 No Breach of Contract

The failure of a Party to fulfill any of its obligations under the contract shall not be considered to be a breach of, or default under, this Contract in so far as such inability arises from an event of Force Majeure, provided that the Party affected by such an event (a) has taken all reasonable precautions, due care and reasonable alternative measures in order to carry out the terms and conditions of this Contract, and (b) has informed the other Party as soon as possible about the occurrence of such an event.

14.3 Extension of Time

Any period within which a Party shall, pursuant to this Contract, complete any action or task, shall be extended for a period equal to the time during which such Party was unable to perform such action as a result of Force Majeure. However, such period shall not exceed sixty (60) days.

14.4 Payments

During the period of their inability to perform the Services as a result of an event of Force Majeure, the Bidder shall be entitled to continue to be paid under the terms of this Contract, as well as to be reimbursed for additional costs reasonably and necessarily incurred by them during such period for the purposes of the Services and in reactivating the Service after the end of such period.

15. Termination

15.1 By the Procuring Agency

The Procuring Agency may terminate this Contract in case of the occurrence of any of the events specified in paragraphs (a) through (e) of this Clause. In such an occurrence the Procuring Agency shall give at least thirty (30) calendar days’ written notice of termination to the Bidder in case of the events referred to in (a) through (d); at least sixty (60) calendar days’ written notice in case of the event referred to in (e);

  1. If the Bidder fails to remedy a failure in the performance of its obligations hereunder, as specified in a notice of suspension;
  2. If the Bidder becomes (or, if the Bidder consists of more than one entity, if any of its members becomes) insolvent or bankrupt or enter into any agreements with their creditors for relief of debt or take advantage of any law for the benefit of debtors or go into liquidation or receivership whether compulsory or voluntary;
  3. If the Bidder fails to comply with any final decision reached as a result of arbitration proceedings;
  4. If, as the result of Force Majeure, the Bidder is unable to perform a material portion of the Services for a period of not less than sixty (60) calendar days;
  5. If the Procuring Agency, in its sole discretion and for any reason whatsoever, decides to terminate this Contract;

15.2 By the Bidder

The Bidder may terminate this Contract, by not less than thirty (30) calendar days’ written notice to the Procuring Agency, in case of the occurrence of any of the events specified in paragraphs (a) through (d) of this Clause.

  1. If the Procuring Agency fails to pay any money due to the Bidder pursuant to this Contract and not subject to dispute within forty-five (45) calendar days after receiving written notice from the Bidder  that such payment is overdue.
  2. If, as the result of Force Majeure, the Bidder is unable to perform a material portion of the Services for a period of not less than sixty (60) calendar days.
  3. If the Procuring Agency fails to comply with any final decision reached as a result of arbitration.
  4. If the Procuring Agency is in material breach of its obligations pursuant to this Contract and has not remedied the same within forty-five (45) days (or such longer period as the Bidder may have subsequently approved in writing) following the receipt by the Procuring Agency of the Bidder’s notice specifying such breach.

C.  Obligations of the Bidder

16. General

16.1 Standard of Performance

  1. The Bidder shall deliver the product and carry out the Services with all due diligence, efficiency and economy, in accordance with generally accepted professional standards and practices, and shall observe sound management practices, and employ appropriate technology and safe and effective equipment, machinery, materials and methods. The Bidder shall always act, in respect of any matter relating to this Contract or to the Services, as a faithful adviser to the Procuring Agency, and shall at all times support and safeguard the Procuring Agency’s legitimate interests in any dealings with the third parties.

16.2 Law Applicable to Goods

The Bidder shall deliver the goods in accordance with the Contract and in accordance with the Law of Pakistan and shall take all practicable steps to ensure that any of its Experts and Sub-Bidders, comply with the Applicable Law. 

17. Conflict of Interests

17.1 Bidder Not to Benefit from Commissions and Discounts.

The remuneration of the Bidder shall constitute the Bidder’s sole remuneration in connection with this Contract or the Services, and the Bidder shall not accept for their own benefit any trade commission, discount, or similar payment in connection with activities pursuant to this Contract or to the Services or in the discharge of their obligations under the Contract, and the Bidder shall use their best efforts to ensure that the Personnel, any Subcontractors, and agents of either of them similarly shall not receive any such additional remuneration.

17.2  Bidder and Affiliates Not to be Otherwise Interested in Project

The Bidder agree that, during the term of this Contract and after its termination, the Bidder and its affiliates, as well as any Subcontractor and any of its affiliates, shall be disqualified from providing Goods for any project resulting from or closely related to the Services.

17.3  Prohibition of Conflicting Activities

Neither the Bidder nor its Subcontractors nor the Personnel shall engage, either directly or indirectly, in any of the following activities:

  1. during the term of this Contract, any business or professional activities in the Government’s country which would conflict with the activities assigned to them under this Contract;
  2. during the term of this Contract, neither the Bidder nor their Subcontractors shall hire public employees in active duty or on any type of leave, to perform any activity under this Contract;

18. Confidentiality

18.1 Except with the prior written consent of the Procuring Agency, the Bidder and the Experts shall not at any time communicate to any person or entity any confidential information acquired in the course of the contract.

19. Insurance to be Taken Out by the Bidder

19.1 The Bidder(a) shall take out and maintain, and shall cause any Subcontractors to take out and maintain, at its (or the Subcontractors’, as the case may be) own cost but on terms and conditions approved by the Procuring Agency, insurance against the risks, loss or damage, and for the coverage, as shall be specified in the SCC; and (b) at the Procuring Agency’s request, shall provide evidence to the Procuring Agency showing that such insurance has been taken out and maintained and that the current premiums have been paid.

20. Bidder’s Actions Requiring Procuring Agency’s Prior Approval

20.1 The Bidder shall obtain the Procuring Agency’s prior approval in writing before taking any of the following actions:

(a)    appointing such members of the Personnel not provided by the Bidder;

(b)    changing the Program of activities; and

(c)     any other action that may be specified in the SCC.

21. Reporting Obligations

21.1 The Bidder shall submit to the Procuring Agency the reports and documents in the numbers, and within the periods as prescribed by the Procuring Agency.

22. Liquidated Damages

22.1  If the Supplier fails to deliver any or all of the Goods or to perform the Services within the period(s) specified in the Contract, the Procuring Agency shall, without prejudice to its other remedies under the Contract, deduct from the Contract Price, as liquidated damages, a sum equivalent to the percentage specified in SCC of the delivered price of the delayed Goods or unperformed Services for each week or part thereof of delay until actual delivery or performance, up to a maximum deduction of the performance security (or guarantee) specified in SCC. Once the said maximum is reached, the Procuring Agency may consider termination of the Contract pursuant to GCC Clause 16.

22.2  Correction for Over-payment

If the Intended Completion Date is extended after liquidated damages have been paid, the Procuring Agency shall correct any overpayment of liquidated damages by the Bidder by adjusting the next payment certificate.  The Bidder shall be paid interest on the overpayment, calculated from the date of payment to the date of repayment, at the rates specified in SCC.

22.3  Lack of performance penalty

If the Bidder has not corrected a Defect within the time specified in the Procuring Agency’s notice, a penalty for Lack of performance will be paid by the Bidder. The amount to be paid will be calculated as a percentage of the cost of having the Defect corrected, assessed as specified in the SCC.

23. Performance Guarantee

23.1 The Performance Security (or Guarantee) shall be provided to the Procuring Agency no later than the date specified in the Letter of Acceptance and shall be issued in an amount and form acceptable to the Procuring Agency as specified in SCC, and   denominated in the types and proportions of the currencies in which the Contract Price is payable as specified in the SCC.

23.2 Within Seven (07) days from the issuance of acceptance letter from the Procuring Agency, the successful Bidder shall furnish the Performance Guarantee in shape of ------- at the discretion of the PA in the amount specified in SCC. In case the amount of   Bids security is equal or greater than

23.3 The proceeds of the Performance Guarantee shall be payable to the Procuring agency as compensation for any loss resulting from the Supplier’s failure to complete its obligations under the Contract.

23.4 The Performance Guarantee shall be denominated in the currency of the Contract, or in a freely convertible currency acceptable to the Procuring agency and shall be in the acceptable form as specified in SCC.

23.5 The Performance Guarantee will be discharged by the Procuring agency and returned to the Supplier not later than thirty (30) days following the date of completion of the Supplier’s performance obligations under the Contract, including any warranty obligations, unless otherwise specified in SCC.

23.6 The bid security of the successful bidder shall not be substituted with the Performance Guarantee.

24. Fraud and Corruption

24.1 The Procuring Agency requires the Supplier to disclose any commissions or fees that may have been paid or are to be paid to agents or any other party with respect to the Bidding process or execution of the Contract. The information disclosed must include at least the name and address of the agent or other party, the amount and currency, and the purpose of the commission, gratuity or fee.

25. Sustainable Procurement

25.1 The Bidder shall conform to the sustainable procurement contractual provisions, if and as specified in the SCC.

D. Bidder’s Personnel

26. Description of Personnel

26.1 The titles, agreed job descriptions, minimum qualifications, and estimated periods of engagement in the carrying out of the Services of the Bidder’s Key Personnel.  The Key Personnel listed by title as well as by name are hereby approved by the Procuring Agency.

27. Removal and/or Replacement of Personnel

27.1 Except as the Procuring Agency may otherwise agree, no changes shall be made in the Key Personnel.  If, for any reason beyond the reasonable control of the Bidder, it becomes necessary to replace any of the Key Personnel, the Bidder shall provide as a replacement a person of equivalent or better qualifications.

27.2 If the Procuring Agency finds that any of the Personnel have (i) committed serious misconduct or have been charged with having committed a criminal action, or (ii) have reasonable cause to be dissatisfied with the performance of any of the Personnel, then the Bidder shall, at the Procuring Agency’s written request specifying the grounds thereof, provide as a replacement a person with qualifications and experience acceptable to the Procuring Agency.

27.3 The Bidder shall have no claim for additional costs arising out of or incidental to any removal and/or replacement of Personnel.

E.  Obligations of the Procuring Agency

28. Assistance and Exemptions

28.1 The Procuring Agency shall use its best efforts to ensure that the Government shall provide the Bidder such assistance and exemptions as specified in the SCC.

29. Change in the Applicable Law

29.1 If, after the date of this Contract, there is any change in the Applicable Law with respect to taxes and duties which increases or decreases the cost of the related Services rendered by the Bidder, then the remuneration and reimbursable expenses otherwise payable to the Bidder under this Contract shall be increased or decreased accordingly by agreement between the Parties, and corresponding adjustments shall be made to the amounts referred in the SCC.

30. Services and Facilities

30.1 The Procuring Agency shall make available to the Bidder and the Experts, for the purposes of the Services and free of any charge, the services, facilities and property described , at the times and in the manner specified in the SCC or terms of reference.

30.2 In case that such services, facilities and property shall not be made available to the Bidder, the Parties shall agree on (i) any time extension that it may be appropriate to grant to the Bidder for the performance of the Services, (ii) the manner in which the Bidder shall procure any such services, facilities and property from other sources, and (iii) the additional payments, if any, to be made to the Bidder as a result thereof.

F. Payments to the Bidder

31. Contract Price

31.1 The price payable shall be in Pakistani Rupees unless otherwise specified in the SCC. Prices charged by the Supplier for Goods delivered under the Contract shall not vary from the prices quoted by the Supplier in its Bid.

32. Terms and Conditions of Payment

32.1 Payments will be made to the Bidder according to the payment schedule stated in the SCC and as per actual invoice submitted by the Bidder.

32.2 Unless otherwise stated in the SCC, the advance payment shall be made against the provision by the Bidder of a bank guarantee for the same amount, and shall be valid for the period stated in the SCC.  Any other payment shall be made after the conditions listed in the SCC for such payment have been met, and the Bidder have submitted an invoice to the Procuring Agency specifying the amount due.

33. Currency of Payment

33.1 Any payment under this Contract shall be made in the currency(ies) specified in the SCC.

G. Quality Control

34. Identifying Defects

34.1 The principle and modalities of Inspection of the Goods by the Procuring Agency shall be as indicated in the SCC. The Procuring Agency shall check the Bidder’s performance and notify him of any Defects that are found.  Such checking shall not affect the Bidder’s responsibilities.  The Procuring Agency may instruct the Bidder to search for a Defect and to uncover and test any service that the Procuring Agency considers may have a Defect. Defect Liability Period is as defined in the SCC.

35. Correction of Defects, and

Lack of Performance Penalty

35.1 The Procuring Agency shall give notice to the Bidder of any Defects before the end of the Contract.  The Defects liability period shall be extended for as long as Defects remain to be corrected.

35.2 Every time notice a Defect is given, the Bidder shall correct the notified Defect within the length of time specified by the Procuring Agency’s notice.

35.3 If the Bidder has not corrected a Defect within the time specified in the Procuring Agency’s notice, the Procuring Agency will assess the cost of having the Defect corrected, the Bidder will pay this amount, and a Penalty for Lack of Performance.

36. Taxes and Duties

36.1 A Supplier shall be entirely responsible for all taxes, duties, fees, etc., incurred until delivery of the contracted Goods to the Procuring Agency.

H. Settlement of Disputes

37. Alternate Dispute Resolution

37.1 Upon the commencement of the Procurement Contract, any disputes arising between the contracting parties shall be resolved in accordance with Rule 66 of the Public Procurement Rules, 2026.

37.2 The procuring agency may refer the matter to the Chief Justice Islamabad High Court or Managing Director PPRA or the Secretary Ministry of Law & Justice for appointment of Arbitrator.

37.3 The fee for the Arbitrator shall be specified in Pak Rupees as determined by the appointing authority which shall be borne and shared equally by the contracting parties.

38. Change Orders

The Procuring Agency may at any time, by a written order given to the Supplier, make changes within the general scope of the Contract in any one or more of the following:

a)Drawings, designs, or specifications, where Goods to be furnished under the Contract are to be specifically manufactured for the Procuring Agency;
b)The method of shipment or packing;
c)The place of delivery; and/or
d)The Services to be provided by the Supplier.

39. Contract Amendenments

39.1 Subject to GCC Clause 32, no variation in or modification of the terms of the Contract shall be made except by written amendment signed by the parties.

40. Sub-Contracts

40.1 The Supplier shall consult the Procuring Agency in the event of subcontracting under this contract if not already specified in the Bid.  Subcontracting shall not alter the Supplier’s obligations.

📑 Special Conditions of Contract (SCC)

Purchase of Civil Items etc. for Maintenance Sub Division of NIH

Published on: Wednesday, October 21, 2026 09:50 AM

Ref# : P152517
QR Code

SECTION VIII. SPECIAL CONDITIONS OF CONTRACT

The following Special Conditions of Contract shall supplement the General Conditions of Contract. Whenever there is a conflict, the provisions herein shall prevail over those in the Conditions of Contract. The corresponding clause number of the GCC is indicated in parentheses.

Number of GC Clause

Amendments of, and Supplements to, Clauses in the General Conditions of Contract

Number of GC Clause 1

Definitions

The Procuring Agency is: National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director Park Road, Islamabad Capital Territory

The Supplier is:

The title of the subject procurement is: Purchase of Civil Items etc. for Maintenance Sub Division of NIH

Number of GC Clause 3

Applicable/Governing Law:

The Contract shall be interpreted in accordance with the laws of Islamic Republic of Pakistan

Number of GC Clause 4

Language:

The language of the Contract, all correspondence and communications to be given, and all other documentation to be prepared and supplied under the Contract shall be in English.

Number of GC Clause 5

Notices:

The addresses for the notices are:

The Authority: 

National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director
Park Road, Islamabad Capital Territory
+92-333-855-4884
purchaseprocurement58@gmail.com

Contractor/ Bidder: 

 [Name, address and telephone number].

The Contractor/ Bidder’s Representative(s)

[Name, address, telephone number and e-mail address]

Number of GC Clause 7.1

The Authorized Representatives are:

For the Procuring Agency:

National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director
Park Road, Islamabad Capital Territory
+92-333-855-4884
purchaseprocurement58@gmail.com

For the Bidder:

Name: ………………………

Designation: ……………..

Address: ……………………………..

Number of GC Clause 8

Effectiveness of the contract

Number of GC Clause 9

Commencement of Contract:

Number of GC Clause 11.2

Expiration of Contract:

Number of GC Clause 15

Termination

In the event of termination of the contract due to any reason as already defined in the General Conditions of Contract, the Bidder shall be responsible for providing to the Authority the Goods till the time of alternate arrangements.

Number of GC Clause 17

Conflict of Interest:

The Procuring Agency reserves the right to determine on a case-by-case basis whether the Bidder should be disqualified from providing goods or services due to a conflict of a nature described in Clause GCC 17.

Number of GC Clause 22

Liquidated Damages 

If the Bidder fails to provide services as required under the contract or in case of any data loss/data breach or any incident compromising the data security or other such failures related to any services, the Bidder shall pay to the Procuring Agency as Liquidated Damages at a rate of 1.00% to 1.00% of the Contract value, in accordance with the extent of performance failure & the cost of investigating such incidents as judged by the Authority.

Number of GC Clause 23

Performance Guarantee:


Instrument of Performance Guarantee shall be in the Name of : Executive Director, National Institutes of Health (NIH)

The amount of performance guarantee shall be 5.00% of the contract price in acceptable form of Pay Order, Call at Deposit, Demand Draft

Number of GC Clause 32

Payment terms:

Payment will be made to the Bidder against the procured Goods and services according to the actual invoice or running bills submitted by the Bidder against the services provided within the time given in the conditions of the contract.

Number of GC Clause 33

Currency of Payment:

All the payment to be released to the contractor/Bidder shall be in Pakistani Rupees.

Number of GC Clause 34

Identifying Defects:

The Authority reserves the right at any time to inspect the premises of the provider to inspect the goods and monitor the goods being provided.

Number of GC Clause 37

Following is the guidance for Dispute Resolution

(a) For Contracts to be entered with foreign Contractor/ Service Provider:

All disputes arising in connection with the present Contract shall be finally settled under the Rules of Conciliation and Arbitration of the International Chamber of Commerce by one or more arbitrators appointed in accordance with said Rules.

(b) For Contracts to be entered with nationals of Pakistan:

i. If any dispute of any kind whatsoever shall arise between the Authority and the Bidder in connection with or arising out of the Contract, including without prejudice to the generality of foregoing, any question regarding its existence, validity, termination and the execution of the Contract – whether during developing phase or after their completion and whether before or after the termination, abandonment or breach of the Contract – the parties shall seek to resolve any such dispute or difference by mutual diligent negotiations in good faith within 14 (fourteen) days following a notice sent by one Party to the other Party in this regard. 

ii. At future of negotiation the dispute shall be resolved through mediation and mediator shall be appointed with the mutual consent of the both parties. 

iii. At the event of failure of mediation to resolve the dispute relating to this contract such dispute shall finally be resolved through binding Arbitration in accordance with GCC clause 38.

iv. The cost of the mediation and arbitration shall be shared by the parties in equal proportion however the both parties shall bear their own costs and lawyer’s fees regarding their own participation in the mediation and arbitration. However, the Arbitrator may make an award of costs upon the conclusion of the arbitration making any party to the dispute liable to pay the costs of another party to the dispute. 
v. Arbitration proceedings as mentioned in the above clause regarding resolution of disputes may be commenced prior to, during or after completion of the contract.

Notwithstanding any reference to the arbitration herein, the parties shall continue to perform their respective obligations under the Contract unless they otherwise agree that the Authority shall pay the Bidder any monies due to the Bidder.

Rules of procedure for arbitration proceedings: 

Any dispute between the Authority and a Bidder who is a national of the Islamic Republic of Pakistan arising in connection with the present Contract shall be referred to adjudication or arbitration in accordance with the laws of the Islamic Republic of Pakistan including Arbitration Act 1940, however above provision shall prevail in referring the case to the Arbitrator.

Place of Arbitration and Award:

The arbitration shall be conducted in English language and place of arbitration shall be at Islamabad. The award of the arbitrator shall be final and shall be binding on the parties.

📑 Bid Securing Declaration (BSD)

Purchase of Civil Items etc. for Maintenance Sub Division of NIH

Published on: Wednesday, October 21, 2026 09:50 AM

Ref# : P152517
QR Code

Form 9: Bid Securing Declaration

Date: [insert date (as day, month and year)]

Bid No.:P152517

Alternative No.: [insert identification No if this is a Bid for an alternative]

To: National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director Park Road, Islamabad Capital Territory

 

We, the undersigned, declare that:

We understand that, according to your conditions, Bids must be supported by a Bid Securing Declaration.

We accept that we will be blacklisted and henceforth cross debarred  for participating in respective category of public procurement proceedings for a period of (not more than) six months, if fail to abide with a bid securing declaration, however without indulging in corrupt and fraudulent practices, if we are in breach of our obligation(s) under the Bid conditions, because we:

  1. have  withdrawn  or  modified  our  Bid  during  the  period  of  Bid  Validity specified in the Form of Bid;
  2. Disagreement to arithmetical correction made to the Bid price; or
  3. having been notified of the acceptance of our Bid by the Procuring Agency during the period of Bid Validity, (i) failure to sign the contract if required by Procuring Agency to do so or (ii) fail or refuse to furnish the Performance Security or to comply with any other condition precedent to signing the contract specified in the Bidding Documents.

We understand this Bid Securing Declaration shall expire if we are not the successful

Bidder, upon the earlier of (i) our receipt of your notification to us of the name of the successful Bidder; or (ii) twenty-eight (28) days after the expiration of our Bid.

Signed: [insert signature of person whose name and capacity are shown] In the capacity of
[insert legal capacity of person signing the Bid Securing Declaration]

Name: [insert complete name of person signing the Bid Securing Declaration]

Duly authorized to sign the Bid for and on behalf of: [insert complete name of Bidder]

Dated on        day of       ,       [insert date of signing]
Corporate Seal (where appropriate)

📑 Contract Form (CNF)

Purchase of Civil Items etc. for Maintenance Sub Division of NIH

Published on: Wednesday, October 21, 2026 09:50 AM

Ref# : P152517
QR Code

SECTION IX: CONTRACT FORMS

 

THIS AGREEMENT made the _____ day of __________ 20_____ between National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director Park Road, Islamabad Capital Territory

 (hereinafter called “the Procuring Agency”) of the one part and [name of Bidder] of [city and country of Bidder] (hereinafter called “the Bidder”) of the other part:

 

WHEREAS the Procuring Agency invited Bids for provision of goods, viz., Purchase of Civil Items etc. for Maintenance Sub Division of NIH (P152517) and has accepted a Bids by the Bidder for the provision of Goods in the sum of [contract price in words and figures] (hereinafter called “the Contract Price”).

 

NOW THIS CONTRACT WITNESSETH AS FOLLOWS:

 

1.   In this Contract words and expressions shall have the same meanings as are respectively assigned to them in the Conditions of Contract referred to.

2.   The following documents shall be deemed to form and be read and construed as part of this Contract, In the event of any ambiguity or conflict between the Contract Documents listed below, the order of precedence shall be the order in which the Contract Documents are listed below:-

  1. This form of Contract;
  2. the Form of Bids and the Price Schedule submitted by the Bidder;
  3. the Schedule of Requirements;
  4. the Technical Specifications;
  5. the Special Conditions of Contract;
  6. the General Conditions of the Contract;
  7. the Procuring Agency’s Letter of Acceptance; and
  8. [add here: any other documents]

3.   In consideration of the payments to be made by the Procuring Agency to the Bidder as hereinafter mentioned, the Bidder hereby covenants with the Procuring Agency to provide the Goods related services and to remedy defects therein in conformity in all respects with the provisions of the Contract.

4.   The Procuring Agency hereby covenants to pay the Bidder in consideration of the provision of Goods and the remedying of defects therein, the Contract Price or such other sum as may become payable under the provisions of the contract at the times and in the manner prescribed by the contract.

 

IN WITNESS whereof the parties hereto have caused this Contract to be executed in accordance with their respective laws the day and year first above written.

 

Signed, sealed, delivered by __________________the ________________ (for the Procuring Agency)

 

Witness to the signatures of the Procuring Agency:

………………………………………………

Signed, sealed, delivered by __________________the ________________ (for the Procuring Agency)

 

Witness to the signatures of the Bidder: …………………………………………………

 

 

📑 Integrity Pact (INP)

Purchase of Civil Items etc. for Maintenance Sub Division of NIH

Published on: Wednesday, October 21, 2026 09:50 AM

Ref# : P152517
QR Code

Integrity Pact

DECLARATION OF FEES, COMMISSION AND BROKERAGE ETC. PAYABLE BYTHE SUPPLIERS OF GOODS, SERVICES & WORKS IN  CONTRACTS WORTH RS.10.00 MILLION OR MORE

 

Contract                           Number:  Contract                               Value:  Contract Title:

Dated:

 

[Name of Supplier] hereby declares that it has not obtained or induced the procurement of any contract, right, interest, privilege or other obligation or benefit from Government of Pakistan or any administrative subdivision or agency thereof or any other entity owned or controlled by it (GoP) through any corrupt business practice.

Without limiting the generality of the foregoing [Name of Supplier] represents and warrants that it has fully declared the brokerage, commission, fee etc. paid  or payable to anyone and not given or agreed to give and shall not give or agree to give to anyone within or outside Pakistan either directly or indirectly through any natural or juridical person, including its affiliate, agent, associate, broker, consultant, director, promoter, shareholder, sponsor or subsidiary, any commission, gratification, bribe, finder's fee or kickback, whether described as consultations fee or otherwise, with the object of obtaining or inducing the procurement of a contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP, except that which has been expressly declared pursuant hereto.

[Name of Supplier] certifies that it has made and will make full disclosure of all agreements and arrangements with all persons in respect of or related to the transaction with GoP and has not taken any action or will not take any action to circumvent the above declaration, representative or warranty.

[Name of Supplier] accepts full responsibility and strict liability for making and false declaration, not making full disclosure, misrepresenting fact or taking any action likely to defeat the purpose of this declaration, representation and warranty. It agrees that any contract, right interest, privilege or other obligation or benefit obtained or procured as aforesaid shall, without prejudice to any other right and remedies available to GoP under any law, contract or other instrument, be voidable at the option of GoP.

Notwithstanding any rights and remedies exercised by GoP in this regard, [Name of Supplier] agrees to indemnify GoP for any loss or damage incurred by it on account of its corrupt business practices and further pay compensation to GoP in an amount equivalent to ten time the sum of any commission, gratification, bribe, finder's fee or kickback given by [Name of Supplier] as aforesaid for the purpose of obtaining or inducing the procurement of any contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP.

📑 Performance Guarantee Form (PGF)

Purchase of Civil Items etc. for Maintenance Sub Division of NIH

Published on: Wednesday, October 21, 2026 09:50 AM

Ref# : P152517
QR Code

Performance Guarantee Form

 

To:     National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director Park Road, Islamabad Capital Territory

 

WHEREAS [name of Bidder] (hereinafter called “the Bidder”) has undertaken, in pursuance of Contract No.  [reference number of the contract] dated [insert date] for provision of Goods(hereinafter called “the Contract”).

 

AND WHEREAS it has been stipulated by you in the said Contract that the Bidder shall furnish you with a Bank Guarantee by a reputable bank for the sum specified therein as security for compliance with the Bidder’s performance obligations in accordance with the Contract.

 

AND WHEREAS we have agreed to give the Bidders guarantee:

 

THEREFORE, WE hereby affirm that we are Guarantors and responsible to you, on behalf of the Bidder, up to a total of [amount of the guarantee in words and figures], and we undertake to pay you, upon your first written demand declaring the Bidder to be in default under the Contract and without cavil or argument, any sum or sums within the limits of [amount of guar­antee] as aforesaid, without your needing to prove or to show grounds or reasons for your demand or the sum specified therein.

 

This guarantee is valid until the: [insert date]

 

 

Signature and seal of the Guarantors

 

 

_____________________________________________________________________

[name of bank or financial institution]

 

 

_____________________________________________________________________

[address]

 

 

_____________________________________________________________________

[date}

📑 Annexure (ANX)

Purchase of Civil Items etc. for Maintenance Sub Division of NIH

Published on: Wednesday, October 21, 2026 09:50 AM

Ref# : P152517
QR Code

Tender Document NIH

Information (Read-Only)

📑 Procurement Forms (PFD)

Purchase of Civil Items etc. for Maintenance Sub Division of NIH

Published on: Wednesday, October 21, 2026 09:50 AM

Ref# : P152517
QR Code