Standard Bidding Document

📑 Procurement Notice (NIT)

Annual Tender FY 2026-27 (Stationary & IT)

Published on: Friday, November 20, 2026 11:45 AM

Ref# : P197793
QR Code

REQUEST FOR BIDS

PROCUREMENT OF GOODS

  1. The Shaheed Zulfiqar Ali Bhutto Medical, University, Islamabad (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad) has reserved Funds for the procurement planned for FY 2026-27. The Shaheed Zulfiqar Ali Bhutto Medical, University, Islamabad (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad) intends to apply part of the proceeds of this Fund to cover eligible payments under the contract for the "Annual Tender FY 2026-27 (Stationary & IT)" with the reference of "P197793"
  2. The Shaheed Zulfiqar Ali Bhutto Medical, University, Islamabad (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad) invites sealed Bids from eligible Bidders for procurement of goods described in the bidding documents on EPADS v2.0.
  3. Single Stage-One Envelope will be used by adopting Least Cost Based Selection (LCBS) Technique for the subject procurement, in line with the Public Procurement Rules, 2026 and any Regulations, Regulatory Guides, Procurement Guidelines or Instructions issued by the Authority from time to time.
  4. All Bids must be accompanied by a Bid Security amount described in Bid Security Section in Bidding Document in the form of  Pay Order or all bids must be accompanied by bid securing declaration in the format specified in the Bidding documents
  5. E-Bidding documents, containing detailed terms & conditions, specifications and requirements etc. are available on e-Pak Acquisition and Disposal System (EPADS) at https://epads.gov.pk/opportunities/federal/procurements/197793 for all the interested bidders registered on EPADS v2.0. Bidders are required to get themselves registered on EPADS v2.0 to participate in Bidding process.
  6. The e-bids, prepared in accordance with the instructions in the e-Bidding Documents, must be submitted through EPADS v2.0 on or before Monday, November 30, 2026 11:00 AM. E-bids will be opened using EPADS v2.0 on the same day at Monday, November 30, 2026 11:30 AM. Manual submission of Bids shall not be entertained. Those vendors who have not yet registered on the new version of EPADS v2.0, may register themselves on https://vendors.epads.gov.pk/. A tutorial to explain the registration process is available at https://www.youtube.com/watch?v=MNW6T38v7tc

In terms of Rule 65 of Public Procurement Rules, 2026 Grievance Redressal Committee (GRC) is notified for the subject procurement and notification copy is available on the procuring agency’s website and on Authority’s website at (www.ppra.gov.pk).

 

 

Shaheed Zulfiqar Ali Bhutto Medical, University, Islamabad (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad), Purchase Officer
Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory
+92-333-539-2247
purchaseofficer@szabmu.edu.pk

📑 Instructions to Bidders (ITB)

Annual Tender FY 2026-27 (Stationary & IT)

Published on: Friday, November 20, 2026 11:45 AM

Ref# : P197793
QR Code

A. Introduction

1.Scope of Bids

1.1 The Procuring Agency (PA), as indicated in the Bids Data Sheet (BDS) invites Bids through EPADS v2.0 for the provision of Goods as specified in the BDS and in Section V – Evaluation Criteria, Specifications & Schedule of Requirements. The name, identification, and number of items/deliverables are provided in the BDS. The successful Bidders will be expected to provide the goods within the specified period and timeline(s) as stated in the BDS.

2. Source of Funds

2.1 Source of funds is referred in Clause-2 I of Invitation for Bids.

3. Eligible Bidders

3.1 A Bidder may be natural person, company or firm or public or semi-public agency of Pakistan or any foreign country, or any combination of them with a formal existing agreement (on Judicial Papers) in the form of a joint venture, consortium, or association. In the case of a joint venture, consortium, or association, all members shall be jointly and severally liable for the execution of the Contract in accordance with the terms and conditions of the Contract. The joint venture, consortium, or association shall nominate a Lead Member as nominated in the BDS, who shall have the authority to conduct all business for and on behalf of any and all the members of the joint venture, consortium, or association during the Bidding process, and in case of award of contract, during the execution of the contract.

Verifiable copy of the agreement that forms a joint venture, consortium or association shall be required to be submitted as part of the Bid.

The appointment of Lead Member in the joint venture, consortium, or association shall be confirmed by submission of a valid Power of Attorney to the Procuring Agency.

Any bid submitted by the joint venture, consortium or association shall indicate the part of proposed contract to be performed by each party and each party shall be evaluated (or post qualified if required) with respect to its contribution only, and the responsibilities of each party shall not be substantially altered without prior written approval of the Procuring Agency and in line with any instructions issued by the Authority.

(The limit on the number of members of JV or Consortium or Association may be prescribed in BDS, in accordance with the guidelines issued by the PPRA).

3.2 The invitation for Bids is open to all prospective suppliers, manufacturers, or authorized agents / dealers subject to any provisions of incorporation or licensing by the respective national incorporating agency or statutory body established for that particular trade or business. Procuring agencies shall specify the registration/licensing requirements for the foreign bidders keeping in view the requirement of that business.

3.3 A Bidder shall not have a conflict of interest. All Bidders found to have a conflict of interest shall be disqualified. A Bidder may be considered to have a conflict of interest with one or more parties in this Bidding process, if they:

  1. are associated or have been associated in the past, directly or indirectly with a firm or any of its affiliates which have been engaged by the Procuring Agency to provide consulting services for the preparation of the design, specifications and other documents to be used for the procurement of the Goods to be purchased under this Invitation for Bids.
  2. have controlling shareholders in common; or
  3. receive or have received any direct or indirect subsidy from any of them; or
  4. have the same legal representative for purposes of this Bid; or
  5. have a relationship with each other, directly or through common third parties, that puts them in a position to have access to information about or influence on the Bids of another Bidder, or influence the decisions of the Procuring Agency regarding this Bidding process; or     
  6. Submit more than one Bid in this Bidding process.

3.4 A Bidder may be ineligible if –

  1. he is declared bankrupt or, in the case of company or firm, insolvent;
  2. payments in favor of the Bidder is suspended in accordance with the judgment of a court of law other than a judgment declaring bankruptcy and resulting (in accordance with the national laws) in the total or partial loss of the right to administer and dispose of its property;
  3. the Bidder is convicted, by a final judgment, of any offence involving professional conduct;
  4. the Bidder is blacklisted locally or by international organizations and hence debarred due to involvement in corrupt and fraudulent practices, or submission of false or misleading information or performance failure or involved in disrupting procurement process or due to breach of bid Securing Declaration.

3.5 As and when required, bidders shall provide to the Procuring Agency evidence of their eligibility, proof of compliance with the necessary legal requirements to carry out the contract effectively.

3.6 Bidders shall submit Bids relating to the nature, conditions and modalities of sub-contracting wherever the sub-contracting of any elements of the contract amounting to more than ten (10) percent of the Bid price is envisaged.

4. Eligible Goods and Related Services

4.1 All goods and related services to be supplied under the contract shall have their origin in eligible source countries, and all expenditures made under the contract will be limited to such goods and services. For purpose of this Bid, ineligible countries are the countries declared ineligible by the Federal Government. 

5. One Bid per Bidder

5.1 A bidder shall submit only one Bid, in the same bidding process, either individually as a Bidder or as a member in a joint venture or any similar arrangement.

5.2 The Bidder shall not engage a subcontractor for any portion of the contract if the value of such subcontracting exceeds thirty percent (30%) of the total contract amount.

6. Cost of Bidding

6.1 Any cost incurred by the bidder relating to the preparation and submission of its Bid shall be borne by the bidder, and the Procuring Agency shall in no case be responsible or liable for those costs, regardless of the conduct or outcome of the bidding process.

B. Bidding Documents

7. Contents of  Bidding Document

7.1 The Goods required, Bidding procedures, and terms and conditions of the contract are prescribed in the Bidding Documents.  In addition to the Invitation for Bids, the Bidding documents which should be read in conjunction with any addenda issued in accordance with ITB 10.1 include:

Section I -Invitation to Bids

Section II Instructions to Bidders (ITB)

Section III Bid Data Sheet (BDS)

Section IV Evaluation Criteria, Specifications, Schedule of Requirements

Section V Bid Forms

Section VI General Conditions of Contract (GCC)

Section VII Special Conditions of Contract (SCC)

Section VIII Contract Forms

Section IX Integrity Pact

Section X Declaration of Beneficial Ownership Information.

7.2 The Bidder is expected to examine all instructions, forms, terms and specifications in the Bidding documents. Failure to furnish all the information required in the Bidding documents through EPADS v2.0 will be at the Bidder’s risk and may result in the rejection of its Bids.

8. Clarification of Bidding documents

8.1 A prospective Bidder requiring any clarification of the Bidding documents may notify the Procuring Agency through EPADS v2.0.

8.2 The Procuring Agency will within two (02) working days after receiving the request for clarification, respond to any request for clarification through EPADS v2.0 provided that such request is received not later than three (03) days, prior to the deadline for the submission of Bids as prescribed in ITB 22

8.3 The Procuring Agency's response will be forwarded to all identified Prospective Bidders through EPADS v2.0, including a description of the inquiry, but without identifying its source.

8.4 Should the Procuring Agency deem it necessary to amend the Bidding document as a result of a clarification, it shall do so following the procedure under ITB 9.

8.5 If indicated in the BDS, the Bidder’s designated representative is invited at the Bidder’s cost to attend a pre-Bid meeting at the place, date and time mentioned in the BDS. During this pre-Bid meeting, prospective Bidders may request clarification of the schedule of requirement, the Evaluation Criteria or any other aspects of the Bidding document.

8.6 Minutes of the pre-Bid meeting, if applicable, including the text of the questions asked by Bidders, including those during the meeting (without identifying the source) and the responses given, together with any responses prepared after the meeting will be uploaded on EPADS v2.0. Any modification to the Bidding documents that may become necessary as a result of the pre-Bid meeting shall be made by the Procuring Agency exclusively through the use of an Addendum pursuant to ITB 9. Non-attendance at the pre-Bid meeting will not be a cause for disqualification of a Bidder.

9. Amendment of Bidding documents

9.1 Before the deadline for submission of Bids, the Procuring Agency for any reason, whether at its own initiative or in response to a clarification requested by a prospective Bidder or Pre-Bid meeting may modify the Bidding documents by issuing addenda through EPADS v2.0.

9.2 The Procuring Agency shall promptly publish the addendum through EPADS v2.0.

Any addendum issued including the notice of any extension of the deadline shall also be communicated through EPADS v2.0 to all the bidders who have already submitted their bids. Such bidders shall have the right to withdraw their already submitted bid and re-submit the revised bid prior to the original or extended bid submission deadline.

9.3 To give prospective Bidders reasonable time in which to take an addendum/corrigendum into account in preparing their Bids, the Procuring Agency may, at its discretion, extend the deadline for the submission of Bids through EPADS v2.0:

Provided that the Procuring Agency shall extend the deadline for submission of Bids, if such an addendum is issued within last three (03) days of the Bids submission deadline.

C. Preparation of Bids

10. Language of Bid

10.1 The Bid prepared by the bidder, as well as all correspondence and documents relating to the Bids exchanged by the Bidder and the Procuring Agency shall be written in the English language unless otherwise specified in the BDS.  Supporting documents and printed literature furnished by the Bidder may be in another language provided they are accompanied by an accurate translation of the relevant pages in the English language unless otherwise specified in the BDS, in which case, for purposes of interpretation of the Bidder, the translation shall govern.

11. Documents and samples Constituting the Bid

11.1 The Bid prepared by the Bidder shall constitute the  documents required in the BDS.

Details of sample(s) where applicable and requested in the BDS.

Documentary evidence established in accordance with ITB 13 that the Bidder is eligible and/or qualified for the subject bidding process;

Documentary evidence established in accordance with ITB  03 that the Bidder has been authorized by the manufacturer to deliver the goods into Pakistan, where required and where the supplier is not the manufacturer of those goods;

Documentary evidence established in accordance with ITB 12 that the goods and related services to be supplied by the Bidder are eligible goods and services, and conform to the Bidding Documents;

Bid security or Bid Securing Declaration furnished in accordance with ITB ---.

12. Documents Establishing Eligibility of the Goods and Conformity to Bidding documents

12.1 To establish the conformity of the bidder to the Bidding document, the Bidder shall furnish as part of its Bids the documentary evidence that Goods provided conform to the technical specifications and standards.

13. Documents Establishing Eligibility and Qualification of the Bidder

13.1 Pursuant to ITB 10, the Bidder shall furnish, as part of its Bid, all those documents establishing the Bidder’s eligibility to participate in the Bidding process and/or its qualification to perform the contract if its Bid is accepted.

14. Form of Bid

14.1 The Bidder shall fill the Form of Bid furnished in the Bidding document. The Bid Form must be completed without any alterations to its format and no substitute shall be accepted.

15. Bid Prices

15.1 The Bid Prices quoted by the Bidder in the Form of Bid and in the Price Schedules shall conform to the requirements specified below or exclusively mentioned hereafter in the Bidding documents.

15.2 All items in the Schedule of Requirement must be listed and priced separately in the Price Schedule(s). If a Price Schedule shows items listed but not priced and neither explicitly denied, their prices shall be construed to be included in the prices of other items.

15.3 In the event that any item(s) in the Price Schedule are not quoted, and such omission is determined by the Procuring Agency not to materially affect the responsiveness of the Bid, the Procuring Agency may, for the sole purpose of bid evaluation and comparison, assign a price to the unquoted item(s) in accordance with the following methodology:

(a) The assigned price shall be the average of the prices quoted for the same item(s) by all substantially responsive bidders; or

(b) In cases where no comparable quotations are available, the Procuring Agency shall apply the corresponding item price from its duly approved cost estimate for evaluation purposes.

The prices so assigned shall be utilized exclusively for bid evaluation and comparison, and shall not, under any circumstances, be incorporated into or form part of the Contract Price.

15.4 The Bid price to be quoted in the Form of Bid in accordance with ITB 13.1 shall be the total price of the Bid.

15.5 The Bidder shall indicate on the appropriate Price Schedule, the unit prices (where applicable) and total Bid price of the Goods it proposes to provide under the contract.

15.6 Prices quoted by the Bidder shall be fixed during the Bidder’s performance of the contract and not subject to variation on any account. A Bid submitted with an adjustable price will be treated as non-responsive and shall be rejected.

16. Bids Currencies

16.1 Prices shall be quoted in Pakistani Rupees unless otherwise specified in the BDS in accordance with Rule 42 (2) of the Public Procurement Rules, 2026.

17. Bids Validity Period

17.1 Such extensions may be more than one time but the total period of such extension shall not exceed the original bid validity period.

17.2 Bids shall remain valid for the period specified in the BDS after the Bid submission deadline prescribed by the Procuring Agency. A Bid valid for a shorter period shall be rejected by the Procuring Agency as non-responsive. The period of Bid validity will be determined from the complementary Bid securing instrument, i.e. the expiry period of Bid Security or Bids Securing Declaration as the case may be.

The procuring agency shall ordinarily be under an obligation to process and evaluate the bid and to issue letter of award within the stipulated bid validity period.

17.3 Under exceptional circumstances, prior to the expiration of the initial Bid validity period, the Procuring Agency may request the Bidders’ consent to an extension of the period of validity of their Bids through EPADS v2.0,. The Bid Security provided under ITB 17 shall also be suitably extended. A Bidder may refuse the request without forfeiting its Bid security or causing to be executed its Bid Securing Declaration.  A Bidder agreeing to the request will not be required nor permitted to modify its Bid, but will be required to extend the validity of its Bid Security or Bid Securing Declaration for the period of the extension.

18. Bid Security or Bid Securing Declaration

18.1 The Bidder shall furnish as part of its Bid, a Bid Security in accordance with Rule 36 of the Public Procurement Rules, 2026.

18.2 The original Bid Security shall be enclosed within the sealed envelope and to be submitted physically before closing time for submission of bids. Whereas, scanned copy of bid security shall be uploaded electronically through EPADS v2.0 before closing hours for submission of bids.

18.3 The Bidder who failed to submit the original Bids security before the submission deadline shall be disqualified straightaway. 

18.4 The Bid Security or Bid Securing Declaration is required to protect the Procuring Agency against the risk of Bidder’s conduct which would warrant the security’s forfeiture, pursuant to ITB 18.7.

18.5 The Bid Security shall be denominated in the local currency or in another freely convertible currency, and it shall be in the form specified in the BDS which shall be in any of the following:

a) a bank guarantee, a bank draft, an irrevocable letter of credit issued by a Scheduled bank in the form provided in the Bidding Documents or another form acceptable to the Procuring Agency;

b) a cashier’s or certified cheque; or

c) another security if indicated in the BDS.

The Bid Security shall be valid for twenty-eight (28) days beyond the end of the validity of the Bid. This shall also apply if the period for Bid Validity is extended. In either case, the form must include the complete name of the Bidder.

18.6 The Bid Security shall be payable promptly upon written demand by the Procuring Agency in case any of the conditions listed in ITB 18.7 are invoked.

18.7 Unsuccessful Bidders' Bid Security will be discharged or returned as promptly as possible, however in no case later than thirty (30) days after the expiration of the period of Bid Validity prescribed by the procuring agency pursuant to ITB 17. The Procuring Agency shall make no claim to the amount of the Bid Security, and shall promptly return the Bid Security documents, after whichever of the following that occurs earliest:

  1. the expiry of the Bid Security;
  2. the entry into force of a procurement contract and the provision of a Performance Guarantee, for the performance of the contract if such a guarantee, is required by the Bid documents;
  3. the rejection by the Procuring Agency of all Bids;
  4.  cancellation of procurement proceedings.
  5. the withdrawal of the Bid prior to the deadline for the submission of Bids, unless the Bid document stipulates that no such withdrawal is permitted.

18.8 The successful Bidder’s Bid Security will be discharged upon the Bidder signing the contract, or furnishing the Performance Guarantee.

18.9 The Bid Security may be forfeited or the Bid Securing Declaration executed:

  1.  if a Bidder:
  2. withdraws its Bid during the period of Bid Validity as specified by the Procuring Agency, and referred by the Bidder on the Form of Bids except as provided for in ITB 16.2; or
  3. does not accept the correction of errors; or
  4. in the case of a successful Bidder, if the Bidder fails:
  5. to sign the contract; or
  6. to furnish Performance Guarantee.

19. Withdrawal, Substitution, and Modification of Bid

19.1 Before Bid submission deadline, any Bidder may withdraw, substitute, or modify its Bid after it has been submitted through EPADS v2.0. 

20. Format and Signing of Bid

20.1 The Bidder shall prepare and submit Bids with due diligence after carefully reading all the terms and condition before bid submission deadline through EPADS v2.0.

D. Submission of Bids

21. Submission of Bids through EPADS v2.0 before bid submission deadline.

21.1 The Technical and Financial Bids, shall be submitted electronically through EPADS, before bid submission deadline. The bid submission option shall be automatically disabled once the deadline is over.

22. Deadline for Submission of Bids

22.1 Bids shall be received by the Procuring Agency through EPADS v2.0 before bid submission deadline.

22.2 The Procuring Agency may, under exceptional circumstances, extend the deadline for the submission of Bids, after recording reasons in writing and in an equal opportunity manner.   

In such case, all rights and obligations of the Procuring Agency and the Bidders that were previously governed by the original deadline shall thereafter be subject to the revised deadline.

E. Opening and Evaluation of Bids

23. Opening of Bids

23.1 The respective Bid Evaluation Committee of the Procuring Agency shall open all Bids through the EPADS v2.0, on the date and time specified in the Bid Data Sheet (BDS).

23.2 The respective Bid Evaluation Committee shall generate minutes through EPADS v2.0 containing brief details of bid opening process. The record of the Bid opening shall include, as a minimum: the name of the Bidder, the Bid price if applicable, and the presence or absence of a Bid Security or Bid Securing Declaration.

23.3 The procuring agency shall live broadcast the opening of bids on national media or on their website or digital channels, if the volume of procurement exceeds five hundred million rupees in case of goods and services and one thousand million rupees in case of works.

23.4 In case the date of opening of bid has been declared as public holiday or the procuring agency fails to open bid due to any EPADS v2.0 related issues, the submission and opening of bids shall be shifted to the next working day at the same time.

23.5 In case of Single Stage One Envelope Procedure, the Bidders names, the Bid prices, the total amount of each Bid and, the presence or absence of Bid Security, Bid Securing Declaration and such other details as the Procuring Agency may consider appropriate, will be announced by the Bid respective Evaluation Committee.

23.6 No bid will be rejected at the time of bid openning except for bids whose original bid security has not been provided to the procuring agency before bid submission deadline.

24. Clarification of Bids

24.1 To assist in the examination, evaluation and comparison of Bids of the Bidders, the respective Bid Evaluation Committee may, ask any Bidder for a clarification of its Bid including breakdown of prices.   

24.2 The request for clarification and the response shall be sought through EPADS v2.0 before three days prior to the deadline for submission of bids. No change in the prices or substance of the Bids shall be sought, offered, or permitted.

24.3 The alteration or modification in the bids which in any way affect the following parameters will be considered as a change in the substance of a Bid:

  1. evaluation & qualification criteria;
  2. required scope of work or specifications;
  3. all securities requirements;
  4. tax requirements;
  5. terms and conditions of Bidding documents.
  6. change in the ranking of the Bidder

24.4 From the time of bid(s) opening to the time of Contract award if any Bidder wishes to contact the Procuring Agency on any matter related to the Bids it should do so through EPADS v2.0.

25. Preliminary Examination of Bids

25.1 Prior to the detailed evaluation of Bids, the respective Bid Evaluation Committee will determine whether each Bid:

  1. meets the eligibility criteria defined in ITB 3;
  2. has been prepared as per the format and contents defined by the Procuring Agency in the Bidding documents;
  3. is accompanied by the required securities; and
  4. is substantially responsive to the requirements of the Bidding documents.

25.2 The respective Bid Evaluation Committee's determination of a Bid's responsiveness will be based on the contents of the Bid itself.

25.3 A substantially responsive Bid is one which conforms to all the terms, conditions, and specifications of the Bidding documents, without material deviation or reservation. A material deviation or reservation is one that: -

  1. affects in any substantial way the scope, quality, or performance of the Goods;
  2. limits in any substantial way, inconsistent with the Bidding documents, the Procuring Agency's rights or the Bidders obligations under the Contract; or
  3. if rectified, would affect unfairly the competitive position of other Bidders presenting substantially responsive Bids.

25.4 If a Bid is not substantially responsive, it will be rejected by the respective Bid Evaluation Committee and may not subsequently be evaluated for complete technical responsiveness.

26. Examination of Terms and Conditions; Technical Evaluation

26.1 The respective Bid Evaluation Committee shall examine the Bids to confirm that all terms and conditions specified in the GCC and the SCC have been accepted by the Bidder without any material deviation or reservation.

26.2 The respective Bid Evaluation Committee shall evaluate the technical aspects of the Bids submitted, to confirm that all requirements specified in Schedule of Requirements and Technical Specifications of the Bidding documents have been met without material deviation or reservation.

26.3 If after the examination of the terms and conditions and the technical evaluation, the respective Bid Evaluation Committee determines that the Bid is not substantially responsive in accordance with ITB, it shall reject the Bid.

27. Correction of Errors

27.1 Bids determined to be substantially responsive will be checked for any arithmetic errors.  Errors will be corrected as follows: -

  1. if there is a discrepancy between unit price and the total price that is obtained by multiplying the unit price and quantity, the unit price shall prevail, and the total price shall be corrected, unless in the opinion of the respective Evaluation Committee there is an obvious misplacement of the decimal point in the unit price, in which the total price as quoted shall govern and the unit price shall be corrected;
  2. if there is an error in a total corresponding to the addition or subtraction of sub-totals, the sub-totals shall prevail and the total shall be corrected; and
  3. where there is a discrepancy between the amounts in figures and in words, the amount in words will govern.
  4. Where there is discrepancy between grand total of price schedule and amount mentioned on the Form of Bid, the amount referred in Price Schedule shall be treated as correct subject to elimination of other errors.

27.2 The amount stated in the Bid will be adjusted by the respective Bid Evaluation Committee in accordance with the above procedure for the correction of errors and, with the concurrence of the Bidder, shall be considered as binding upon the Bidder. If the Bidder does not accept the corrected amount, its Bid will then be rejected, and the Bid Security may be forfeited or the Bids Securing Declaration may be executed.

28. Conversion to Single Currency

28.1 For the purposes of comparison of bids quoted in different currencies, the price shall be converted into a single currency in accordance with Rule 42(2) of Public Procurement Rules,2026.

29. Evaluation of Bids

29.1 The Bids, quotations, or proposals shall be evaluated by the respective evaluation committees as per evaluation criteria prescribed in the Bidding Documents in accordance with Rule 11, 12 and 13 of the Public Procurement Rules, 2026.

29.2 While evaluating the bids, the procuring agency shall consider the following:

i. Bids will be evaluated on lump sum bid basis or items wise or Lot wise (contracts), as specified in the BDS; and the Bid Price;

ii. correction of arithmetic errors in accordance with ITB 27;

30. Domestic Preference

30.1 The respective Bid Evaluation Committee shall evaluate and compare bids, allow for preference to domestic bidders, while competing with the international bidders in accordance with the policies of the Federal Government.

The percentage of preference, to be accorded shall be clearly mentioned in the bidding documents under the bid evaluation criteria.

31. Determination of Successful Bid

31.1 Selection technique will be adopted for determining the Successful Bid in accordance with the criteria referred in the BDS or prescribed in the separate section titled as Evaluation Criteria.

31.2 Least Cost Based Selection (LCBS)
After meeting the requirements of eligibility, qualification and substantial responsiveness, the bid in compliance with all the mandatory (technical) specifications/requirements and/or requisite quality threshold (if any), and having lowest evaluated cost (or financial proposal) shall be considered Successful Bid.

31.3 Quality and Cost Based Selection (QCBS)
In such combination, there shall be some specific weightage of both the technical features and financial aspects of the proposal. The financial marks shall be awarded on the basis of inverse proportion calculations. The successful bid shall be declared, on the basis of combined evaluation.

31.4 Quality Based Selection (QBS)
After meeting the requirements of eligibility, qualification and substantial responsiveness the bid in compliance with all the mandatory (technical) specifications/requirements and attaining highest marks in the Technical Evaluation considering all other qualitative and/or quantitative parameters (or point rated criteria) for technical proposal(s) such as working methodology, implementation plan, resource allocation, additional functionalities, risk management approach, knowledge transfer techniques, post implementation methodology etc. shall be treated as highest ranked bid. Later on, the financial proposal of highest ranked bidder shall be opened, however, in case of failure to proceed further with such a bidder, the procuring agency may resort to second highest bidder and so on.

31.5 The Procuring Agency may adopt the Quality & Cost Based Selection Technique due to the following two reasons:

1. Where the Procuring Agency knows about the main features, usage and output of the products; however not clear about the complete features, technical specifications and functionalities of the goods to be procured and requires the bidders to submit their proposals defining those features, specifications and functionalities; or

2. Where the Procuring Agency, in addition to the mandatory requirements and mandatory technical specifications, requires parameters specified in Evaluation Criteria to be evaluated while determining the quality of the goods.

31.6 In such cases, the Procuring Agency may allocate certain weightage to these factors as a part of Evaluation Criteria, and may determine the ranking of the bidders on the basis of combined evaluation in accordance with provisions of Rule 2(1)(xxviii) of the Public Procurement Rules, 2026.

32. Abnormally Low Financial Bids

32.1 An abnormally low bid is a bid that, in light of the Procuring Agency's cost estimate, market conditions, or other received bids, appears to be unrealistically low and may not be sustainable for successfull contract execution.

32.2 Where the Bid price is considered to be abnormally low, the Procuring Agency shall perform price analysis either during determination of Successful Bids or as a part of the post-qualification process.

32.3 The Procuring Agency may reject an Abnormally low financial bid in accordance with Rule 43 of the Public Procurement Rules, 2026.

32.4 In order to identify the Abnormally Low Bids (ALB) following approaches can be considered to minimize the scope of subjectivity:

  1. Comparing the Bid price with the cost estimate;
  2. Comparing the Bid price with the Bid(s) offered by other Bidders submitting substantially responsive Bids; and
  3. Comparing the Bids price with prices paid in similar contracts in the recent past either government- or development partner-funded.

32.5 The respective Bid Evaluation Committee will determine to its satisfaction whether the Bidder that is selected as having submitted the successful bid is qualified to perform the contract satisfactorily.

32.6 The determination will take into account the Bidder’s financial, technical, and production capabilities.  It will be based upon an examination of the documentary evidence of the Bidder’s qualifications submitted by the Bidder, as well as such other information as the Procuring Agency deems necessary and appropriate. Factors not included in these Bidding documents shall not be used in the evaluation of the Bidders’ qualifications.

32.7 Respective Bid Evaluation Committee may seek “Certificate for Independent Price Determination” from the Bidder and the results of reference checks may be used in determining an award of contract.

Explanation: The Certificate shall be furnished by the Bidder. The Bidder shall certify that the price is determined keeping in view of all the essential aspects such as raw material, its processing, value addition, optimization of resources due to economy of scale, transportation, insurance and margin of profit etc.

32.8 An affirmative determination will be a prerequisite for award of the contract to the Bidder. A negative determination will result in rejection of the Bidder’s Bid, in which event the respective Bid Evaluation Committee will proceed to the next ranked Bidder to make a similar determination of that Bidder’s capabilities to perform satisfactorily.

F. Award of Contract

33. Criteria of Award

33.1 The Procuring Agency will award the Contract to the Bidder whose Bids has been determined to be substantially responsive to the Bidding documents and who has been declared as Successful Bidder.

34. Negotiations

34.1  In accordance with Rule 52A of Public Procurement Rules, 2026, without changing the cost and scope of work or services, the procuring agency may negotiate with the successful bidder (with a view to streamline the work or task execution, at the time of contract finalization) on methodology, work plan, staffing and special conditions of the contract.

There shall be no limitation on the successful bidder offering voluntary reduction in bid price without affecting the quality or scope of the procurement.

35. Procuring Agency's Right to reject all bids

35.1 The Procuring Agency reserves the right to reject all bids or proposals at any time prior to the issuance of the Letter of Award, without incurring any liability, in accordance with Rule 45 of the Public Procurement Rules, 2026.

36. Cancellation of Procurement

36.1 The procuring agency reserves the right to cancel the procurement proceedings in accordance with Rule 46 of the Public Procurement Rules, 2026.

37. Procuring Agency’s Right to Vary Quantities at the Time of Award

37.1 The Procuring Agency reserves the right at the time of contract award to increase or decrease the quantity of Goods originally specified in these Bidding documents provided this does not exceed by 15%, without any change in unit price or other terms and conditions of the Bids and Bidding documents.

38. Notification of Award

38.1 Prior to the award of contract, the procuring agency shall announce and publish the result of bid evaluation on EPADS v2.0 in accordance with Rule 48 of the Public Procurement Rules, 2026.

The Bidder whose Bids has been accepted will be notified of the award by the Procuring Agency prior to expiration of the Bids/Bid Validity period. The Letter of Award will state the sum that the Procuring Agency will pay the successful Bidder in consideration for the delivery of Goods as prescribed by the Contract (hereinafter and in the Contract called the "Contract Price).

38.2 The Letter of award will constitute the formation of the Contract, subject to the Bidder furnishing the Performance Guarantee and signing of the contract.

39. Signing of Contract

39.1 Promptly after issuance of Letter of award, Procuring Agency shall send the successful Bidder the draft Contract, incorporating all terms and conditions as agreed by the parties to the contract.

39.2 Immediately after the Redressal of grievance by the GRC (if any), and after fulfillment of all conditions precedent of the Contract Form, the successful Bidder and the Procuring Agency shall sign the Contract. 

40. Corrupt & Fraudulent Practices

40.1 Procuring Agencies (including beneficiaries of Government funded projects and procurement) as well as Bidders/Contractors under Government financed contracts, observe the highest standard of ethics during the procurement and execution of such contracts, and will avoid engaging in any corrupt and fraudulent practices. 

F. Grievance Redressal & Complaint Review Mechanism

41. Constitution of Grievance Redressal Committee

41.1 The Grievance Redressal Committee shall address the grievance, if any submitted by any party, including the bidder, in accordance with Rule 65 of the Public Procurement Rules, 2026 read with Redressal of Grievances Regulations, 2021.

In case if any party or the bidder is not satisfied with the decision of the GRC or if it fails to decide within ten days, the bidder or the party may file an appeal before the Appellate Committee of the Authority in accordance with Rule 65(7) of the Public Procurement Rules, 2026 to be read with Redressal of Grievances Regulations, 2021.

G. Mechanism of Blacklisting

42. Mechanism of Blacklisting

42.1 The Procuring Agency shall initiate blacklisting proceedings against any bidder, supplier, or contractor in accordance with the Rule 25 of the Public Procurement Rules, 2026.

42.2 The blacklisted/debarred bidder may file the review petition before the Authority in accordance with Rule 25 (6) of the Public Procurement Rules, 2026 to be read with Procedure of filing and disposal of Review Petitions Regulations, 2021.

43. Contract Management

43.1 For each procurement, the Procuring Agency shall designate a Contract Manager, who shall be duly responsible for the efficient management and administration of the contract in strict compliance with the provisions set forth under Rules 58, 59, and 60 of the Public Procurement Rules, 2026.

44. Inspection of goods and evaluation of services.

44.1 The Inspection Committee or the Firm shall have the right to conduct inspections of the goods in accordance with Rule 61 of the Public Procurement Rules, 2026.

45. Socio-economic development. 

 45.1 In accordance with Rule 63 of the Public Procurement Rules, 2026, preference may be granted to small and medium enterprises and marginalized groups in accordance with the policies notified by the Federal Government.

46. Environmental objectives

46.1 As per Rule 64 of the Public Procurement Rules, 2026, the procuring agency may seek to procure goods with a reduced environmental impact throughout their life cycle when compared to goods services with the same primary function that may otherwise be procured.

📑 Bid Data Sheet (BDS)

Annual Tender FY 2026-27 (Stationary & IT)

Published on: Friday, November 20, 2026 11:45 AM

Ref# : P197793
QR Code

Bids Data Sheet (BDS)

The following specific data for the procurement of Goods to be procured shall complement, supplement, or amend the provisions in the Instructions to Bidders (ITB).  Whenever there is a conflict, the provisions herein shall prevail over those in ITB.

BDS Clause Number
ITB Number
Amendments of, and Supplements to, Clauses in the Instruction to Bidders

A. Introduction

BDS Clause Number 1
ITB Number 1.1

Name of Procuring Agency: Shaheed Zulfiqar Ali Bhutto Medical, University, Islamabad (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad)

The subject of procurement is: Annual Tender FY 2026-27 (Stationary & IT)

Period for Provision of Goods:

Extension Period (if applicable):

Expected commencement date: Thursday, December 31, 2026

BDS Clause Number 2
ITB Number 2.1

Source of funds [Enter source of funds]

Financial year for the operations of the Procuring Agency: 2026-27

Name and identification number of the Contract: P197793 

Identification Number:

BDS Clause Number 3
ITB Clause Number 3.1

Eligible Bidder [Enter eligibility of bidder]

JV/Consortium or Association Allowed: No
Number of JV/Consortium Members: Nil
see section of eligibility criteria.

B. Bidding Documents

BDS Clause Number 4

ITB Clause Number 4.1

Eligible goods and related services [Enter requirements for eligible goods and related services, if any]


ITB Number 8.1

The Bidders may seek clarifications through EPADS v2.0 : Clarification Date: Friday, November 27, 2026

ITB Number 8.2

The Bidders may seek clarifications through EPADS v2.0 : Clarification Date: Friday, November 27, 2026

ITB Number 8.3

The Bidders may seek clarifications through EPADS v2.0 : Clarification Date: Friday, November 27, 2026

ITB Number 8.5

Pre-bid meeting will be/will not be held [Tick the appropriate] If yes write down the time, and date of the pre-Bid meeting:
[The meeting should take place not later than one weeks before the deadline for Bid submission.]

C. Preparation of Bids

BDS Clause Number 5
ITB Number 10.1

The Language of all correspondences and documents related to the Bids shall be in: English 

List of documents required along with the bid:

  1. 1. Bids are invited Single Stage & Two Envelope method through e-Pak Acquisition & Disposal System (E-PADS 2.0) as per PPRA rules 2004 from well-established national firms / contractors / dealers / suppliers duly registered with Sales Tax / Income Tax, NTN & GST departments, and registered in (ALT) Active Tax Payer List having offices in Islamabad Rawalpindi, during the Financial Year 2026-27.
  2. The work will be awarded on an item-wise basis to the lowest quoted bidder for each item.

BDS Clause Number 6
ITB Number 11.1

Documents required / not required with bid submission [enter list of documents] Samples required / not required with the bid [Enter the names and number of samples]
Items/Lots and their related documents:
See section items and Lots

BDS Clause Number 7
ITB Number 12.1

Items / Lots Specifications:

see section of items specifications.

BDS Clause Number 8
ITB Number 15.6

The price shall be Fixed.

BDS Clause Number 9
ITB Number 16.1

Currency of the Bids shall be : PKR

BDS Clause Number 10
ITB Number 17.1

The Bids/Bid Validity period shall be: 120 Days

BDS Clause Number 11
ITB Number 18.1

The amount of Bid Security shall be as defined in Bid Security Section for items and lots given in BDS 6
Instrument of Bid Security shall be in the Name of : Shaheed Zulfiqar Ali Bhutto Medical, University, Islamabad
The Bid Security shall be in the form of: Pay Order  

ITB Number 18.2

The address for submission of original bid security is [ Insert the address for bid security submission]

D. Submission of Bids

BDS Clause Number 12
ITB Number 20.1

Bid shall be submitted online on EPADS v2.0 whereas hard copy of the bid security should be submitted to the following;

Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory before bid submission deadline.

Bids that are not submitted on EPADS v2.0 shall be disqualified.

The deadline for Bids submission is: Monday, November 30, 2026 11:00 AM

Day : Monday

Date: Monday, November 30, 2026

Time : 11:30 AM

E. Opening and Evaluation of Bids

BDS Clause Number 13
ITB Number 23.1

The Bids opening shall take place on EPADS v2.0.

Day : Monday

Date: Monday, November 30, 2026

Time : 11:30 AM

ITB Number 29.2

The procuring agency shall consider the following:
lump sum bid basis; or 
items wise; or 
Lot wise (contracts), 

ITB Number 30.1

BDS Clause Number 14
ITB Number 31.1

Domestic Preference [applicable / not applicable]

ITB Number 31.2

Selection technique adopted will be: 
The Procuring Agency shall use any of the following evaluation techniques for determination of successful bid.

Least Cost Base Selection (LCBS)
Quality and Cost Based Selection (QCBS)
Quality Based Selection (QBS)
[Insert the Evaluation Technique]

Selection technique adopted will be: Least Cost Based Selection (LCBS)
see Evaluation Criteria

F. Review of Procurement Decisions

BDS Clause Number 15
ITB Number 41.1

Grievence against this procurement shall be submitted online on EPADS v2.0.

Arbitrator shall be appointed by mutual consent of the both parties.

ITB Number 42.2

The Address of PPRA Grievance Redressal Appellate Committee to submit a copy of grievance:

Grievance Redressal Appellate Committee,
Public Procurement Regulatory Authority
1st Floor, G-5/2, Islamabad, Pakistan
Tel: +92-51-9202254

Eligibility Criteria

All Active Taxpayers shall be eligible to participate in the procurement process, unless expressly excluded or otherwise restricted under the Eligibility Criteria specified by the Procuring Agency.

Required Registration

NADRA CITIZENSHIP (CNIC/NICOP)

FBR (NTN)

FBR (GSTN)

Eligibility Criteria Document
AS per PPRA Rules Manufacturers/Distributors/ Suppliers must have valid NTN and GST. Manufacturers/Distributors/ Suppliers must be ATL in FBR Active Taxpayer List. Quoted prices should be Inclusive of All Taxes and Delivery charges. Quotation must be valid for 1 week. Procuring agency have the right to Accept or Reject any quotation at any time. Final Decision should be taken by Procurement department and cannot to be challenged. Yes

Evaluation Criteria

Eligibile bidder(s) with substantially responsive bid(s) offering Least Cost Based Selection (LCBS) shall be consider for the award of contract(s).

Least Cost Based Selection (LCBS)

Weightage

Technical Evaluation %
100
Technical Marks100
Passing Marks70
Relevant Experience in Similar Supplies (Minimum 5 Years)
Relevant Experience in Similar Supplies (Minimum 5 Years) (Quantitative)(Doc Required)

  8 year plus   (25)

  6-7 Year   (20)

  5 year   (15)

25
Annual Turnover (Verified through Tax Returns or Bank Statement)
Annual Turnover (Verified through Tax Returns or Bank Statement) (Quantitative)(Doc Required)

  Rs. 20 Million or Above   (20)

  Rs. 16-20 Million   (16)

  Rs. 10-15 Million   (12)

20
Valid Registrations (NTN, GST, ATL)
Valid Registrations (NTN, GST, ATL) (Quantitative)(Doc Required)15
Office Location in Islamabad/Rwp (Office Presence in either city)
Office Location in Islamabad/Rwp (Office Presence in either city) (Quantitative)(Doc Required)10
Compliance with Specification Requirements
Compliance with Specification Requirements (Quantitative)(Doc Required)

  Fully Compliant   (20)

  Partially Compliant   (15)

  Non-Compliant   (1)

20
Undertaking / Affidavit (non blacklisting)
Undertaking / Affidavit (non blacklisting) (Quantitative)(Doc Required)5
Company Profile & Past Performance (Strong Documentation with client reference )
Company Profile & Past Performance (Strong Documentation with client reference ) (Quantitative)(Doc Required)5

Items/Lots

Items Without Lots :

Item UNSPSC Delivery Schedule Quantity Bid SecurityWarranty
Ball Point 0.8mm Piano (or equivalent) Ball point pens
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 05 Days Quantity: 2500/Qty
2500/Qty 488 PKR--
Ball Point (Clipper Dollar (or equivalent) Ball point pens
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 05 Days Quantity: 2500/Qty
2500/Qty 488 PKR--
Gel Pen Gel pens
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: Days 05 Quantity: 250/Qty
250/Qty 293 PKR--
Ball Pen Ball point pens
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 01 Days Quantity: 250/Qty
250/Qty 3120 PKR--
Pointer Pointers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 05 Days Quantity: 250/Qty
250/Qty 85 PKR--
Permanent Marker Markers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 05 Days Quantity: 200/Qty
200/Qty 170 PKR--
White Board Marker Markers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 05 Days Quantity: 200/Qty
200/Qty 170 PKR--
Highlighter Highlighters
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 01 Days Quantity: 200/Qty
200/Qty 118 PKR--
Fluid Pen Correction fluid
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: Days05 Quantity: 200/Qty
200/Qty 118 PKR--
Ring Binder Binders
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 05Days Quantity: 100/Qty
100/Qty 416 PKR--
Binder Clip Paper clips
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 01 Days Quantity: 100/Qty
100/Qty 11.5 PKR--
Binder Clip Paper clips
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 01 Days Quantity: 100/Qty
100/Qty 16.5 PKR--
Binding Sheet Sheet protectors
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 01 Days Quantity: 20/Qty
20/Qty 208 PKR--
Binding tape Binding covers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 05 Days Quantity: 100/Qty
100/Qty 495 PKR--
Dollar Ink Ink refills
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 05 Days Quantity: 10/Qty
10/Qty 7.8 PKR--
Stamp Automatic Stamps
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 05 Days Quantity: 10/Qty
10/Qty 208 PKR--
Stamp Automatic Stamps
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 05Days Quantity: 50/Qty
50/Qty 975 PKR--
Ink for Automatic Stamp Stamps
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 01 Days Quantity: 50/Qty
50/Qty 293 PKR--
Manual Stamp Stamps
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 05 Days Quantity: 30/Qty
30/Qty 195 PKR--
Stamp Pad Stamps
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 05 Days Quantity: 50/Qty
50/Qty 39 PKR--
Single Hole Punch Paper or eyelet punches
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 01 Days Quantity: 50/Qty
50/Qty 39 PKR--
Double Hole Punch Small Paper or eyelet punches
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 195 PKR--
Double Hole Punch Large Paper or eyelet punches
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 195 PKR--
Glue Stick Small Acid free glue sticks
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 200/Qty
200/Qty 559 PKR--
Glue Stick Large Acid free glue sticks
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 200/Qty
200/Qty 260 PKR--
Paper Tape Paper tapes
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 390 PKR--
Paper Tape Paper tapes
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 260 PKR--
Paper Tape Paper tapes
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 260 PKR--
Packing Tape Packaging tape
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 143 PKR--
Packing Tape Packaging tape
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 135 PKR--
Scotch Tape Transparent Transparent tape
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 235 PKR--
Scotch Tape Transparent Transparent tape
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 180 PKR--
Scotch Tape Transparent Transparent tape
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 175 PKR--
Scotch Tape Dispenser (Small) Tape dispensers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 245 PKR--
Scotch Tape Dispenser (Large) Tape dispensers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 325 PKR--
Foot Scale Rulers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 91 PKR--
ID Card Dori Protective coveralls
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10000/Qty
10000/Qty 170 PKR--
Plastic Card Pouch Protective coveralls
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 1000/Qty
1000/Qty 200 PKR--
Note Sheet A4 Printer or copier paper
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 78 PKR--
Note Sheet Legal Printer or copier paper
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 104 PKR--
Envelop Small (Plain) Mailers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 5.2 PKR--
Envelop A4 (Plain) Mailers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 10.4 PKR--
Envelop Legal (Plain) Mailers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 13 PKR--
Envelop Extra Large (Plain) Mailers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 19.5 PKR--
Paper Clip Large Paper clips
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 59 PKR--
Paper Clip Small Paper clips
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 84.5 PKR--
Common Pin Pins or tacks
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 36 PKR--
Pin Opener Scissors
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 65 PKR--
Notice Board Pin Pins or tacks
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 14.4 PKR--
Paper/Knife Cutter Paper cutters or refills
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 65 PKR--
Scissor Large Scissors
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 78 PKR--
Scissor Small Scissors
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 39 PKR--
Lead Pencil Wooden pencils
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 500/Qty
500/Qty 120 PKR--
Pencil Sharpener Manual pencil sharpener
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 500/Qty
500/Qty 90 PKR--
Sharpener Plastic Manual pencil sharpener
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 500/Qty
500/Qty 70 PKR--
Eraser Erasers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 500/Qty
500/Qty 195 PKR--
Pen Stand Marble Pen or pencil holders
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 110.5 PKR--
Drafting Pad Small Paper pads or notebooks
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 68 PKR--
Drafting Pad Medium Paper pads or notebooks
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 75 PKR--
Drafting Pad Large Paper pads or notebooks
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 85 PKR--
Attendance Register Log books or pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 45.5 PKR--
Attendance Register Log books or pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 136.5 PKR--
Stock/Issue Register Log books or pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 182 PKR--
Stock/Issue Register Log books or pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 113.75 PKR--
Stock/Issue Register Log books or pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 273 PKR--
Ledger Register Log books or pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 182 PKR--
Dispatch Regiser Log books or pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 182 PKR--
Salary Register Log books or pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 45.5 PKR--
Register Imported Log books or pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 42.9 PKR--
Register Imported Log books or pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 57.2 PKR--
Register Imported Log books or pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 71.5 PKR--
Register Imported Log books or pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 85.8 PKR--
Register Imported Log books or pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 143 PKR--
Peon Book Log books or pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 255 PKR--
Log Book 6 Nos Log books or pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 625 PKR--
Movement Register Log books or pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 156 PKR--
Lamination Sheets A4 Laminator pouches
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/pack
10/pack 260 PKR--
Lamination Sheets Legal Laminator pouches
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/pack
10/pack 325 PKR--
Color Paper Printer or copier paper
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/pack
10/pack 227.5 PKR--
Box File Box file
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 179 PKR--
File Board Folders
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 26 PKR--
File Cover Plastic Folders
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 36 PKR--
File Separator Set File inserts or tabs
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 67.5 PKR--
File Flag Binder pockets or accessories
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/pack
50/pack 36 PKR--
Photostat Paper A4 Printer or copier paper
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 500/Qty
500/Qty 7500 PKR--
Photostat Paper Legal Printer or copier paper
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 609 PKR--
Paper Ream A4 Printer or copier paper
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 724.5 PKR--
Paper Ream A4 Printer or copier paper
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 200/Qty
200/Qty 2996 PKR--
Paper Ream Legal Printer or copier paper
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 200/Qty
200/Qty 3458 PKR--
Paper Ream A4 Printer or copier paper
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 200/Qty
200/Qty 3250 PKR--
Plastic File/Report cover Folders
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 162.5 PKR--
Sticky Note Self adhesive note paper
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/pack
100/pack 162.5 PKR--
Sticky Note Self adhesive note paper
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 250/pack
250/pack 210 PKR--
File Tags Binder pockets or accessories
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 250/pack
250/pack 245 PKR--
Color Flags Binder pockets or accessories
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 250/pack
250/pack 180 PKR--
Photo Glassy Paper Sheet Printer or copier paper
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 357.5 PKR--
Ring File Binders
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 455 PKR--
Ring File Binders
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 485 PKR--
Rubber Band Rubber bands
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/pack
100/pack 78 PKR--
Stamp Pad Ink Stamps
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 7.2 PKR--
Staple Machine (Small) Staplers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 495 PKR--
Staple Machine (Heavy Duty) Staplers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 312 PKR--
Staple Pin 24/6 Staples
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 500/pack
500/pack 360 PKR--
Stapler Pins 23/17 Staples
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/pack
10/pack 40.3 PKR--
Stapler Pins 23/13 Staples
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/pack
10/pack 32.5 PKR--
Stapler Pins 23/10 Staples
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/pack
50/pack 136.5 PKR--
Stapler Pins 23/8 Staples
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/pack
10/pack 20.8 PKR--
Table Diary Diaries or refills
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/pack
10/pack 49.9 PKR--
Table Set Rexine Desktop trays or organizers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 195 PKR--
Table Set (Marble) Desktop trays or organizers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 110.5 PKR--
UHU Tube 35 ml. Glues
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 384 PKR--
UHU Tube 60 ml. Glues
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 549 PKR--
UHU Tube 125 mI. Glues
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 877 PKR--
Visiting Card Holder Business card holders
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days0 Quantity: 10/Qty
10/Qty 45.5 PKR--
Visiting Card Case Business card holders
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 13 PKR--
White Board Dry erase boards or accessories
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 78 PKR--
White board Dry erase boards or accessories
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 156 PKR--
White Board Stand Tables
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 97.5 PKR--
Duster for white Board Whiteboard eraser
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 3.9 PKR--
Notice Board Bulletin boards or accessories
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 78 PKR--
Notice Board Bulletin boards or accessories
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 78 PKR--
Water Dumper Food service trays
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 156 PKR--
Laptop Bag Computer bags
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 9.75 PKR--
Photo Paper Printer or copier paper
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 39 PKR--
Clear Bag Zipper bag
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 39 PKR--
Table Scheduler Stand Calendars
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 195 PKR--
Table Calendar Calendars
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 78 PKR--
Table Tray Desktop trays or organizers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 48.75 PKR--
L Shap Folder A4 Folders
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 1.85 PKR--
Calculator (12- Digits) Adding machines
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 78 PKR--
Calculator (14- Digits) Adding machines
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 390 PKR--
Duster Yellow Paper cutters or refills
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 200/Qty
200/Qty 104 PKR--
File Tray /Basket Desktop trays or organizers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 65 PKR--
Remote Bell/Peon Bell Sirens
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 286 PKR--
Dust Bin Large Waste containers or rigid liners
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 270 PKR--
Dust Bin Medium Waste containers or rigid liners
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 30/Qty
30/Qty 285 PKR--
Glass /Wood Cleaner Glass or window cleaners
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 130 PKR--
Air freshened Air freshener
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 162.5 PKR--
Insect Killer Insecticides
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 18 PKR--
Pencil Cell Alkaline batteries
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 18 PKR--
Pencil Cell Alkaline batteries
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 18 PKR--
Cell Alkaline batteries
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 17.5 PKR--
Cell Alkaline batteries
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 15 PKR--
Table Cloth Velvet Napkins
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 13 PKR--
Table Glass Domestic tumble dryers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 25.5 PKR--
Tissue Paper Paper towels
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 1000/Qty
1000/Qty 3100 PKR--
Toilet Roll Toilet tissue
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 52 PKR--
Face Mask Masks or accessories
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 97.5 PKR--
Hand Gloves Small Protective gloves
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/box
50/box 575 PKR--
Hand Gloves Medium Protective gloves
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/box
50/box 600 PKR--
Hand Gloves Large Protective gloves
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/box
50/box 617.5 PKR--
Hand Gloves Small Protective gloves
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/box
50/box 675 PKR--
Hand Gloves Medium Protective gloves
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/box
50/box 700 PKR--
Hand Gloves Large Protective gloves
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/box
50/box 728 PKR--
Towel White (Small) Hand towels
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 715 PKR--
Towel White (Large) Hand towels
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 910 PKR--
Wall Clock Wall clocks
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 260 PKR--
Electric Extension 05 Meters Electrical plugs
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 30/Qty
30/Qty 825 PKR--
Electric Extension 10 Meters Electrical plugs
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 30/Qty
30/Qty 1005 PKR--
Steno Set with CLI Analog telephones
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 585 PKR--
Telephone Set with CLI Analog telephones
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 262.5 PKR--
Key Boards (USB Port, PS/2) Keyboards
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 260 PKR--
Mouse Wireless Computer mouse
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 214.5 PKR--
Mouse Wired Computer mouse
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 104 PKR--
Flash Drive 3.2 Pen or flash drive
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 29.25 PKR--
Flash Drive 3.2 Pen or flash drive
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 44.25 PKR--
Flash Drive 3.2 Pen or flash drive
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 135 PKR--
Flash Drive 3.2 Pen or flash drive
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 156 PKR--
USB Extension Lead for Data Cable Computer cable
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 52 PKR--
CD (R) 700 MB Compact disks CDs
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/box
5/box 123.5 PKR--
DVD (R) 4.7 Blank tapes
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/box
5/box 149.5 PKR--
DVD (R) 8 GB Blank tapes
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/box
5/box 455 PKR--
Printer Data Cable (USB) Signal cable
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 22.75 PKR--
Wifi Adaptor Network routers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 9.25 PKR--
LCD Display VGA Cable Signal cable
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 22.75 PKR--
HDMI Cable Signal cable
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 36.5 PKR--
HDMI Cable Signal cable
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 35.75 PKR--
HDMI Cable Signal cable
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 97.5 PKR--
HDMI Cable Signal cable
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 120.25 PKR--
HDMI Cable Signal cable
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 617.5 PKR--
Internet Cable Network cable
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 20.75 PKR--
internet Cable Network cable
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 21 PKR--
Internet Cable Network cable
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 31.25 PKR--
Internet Routed Network routers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 197.5 PKR--
Passport Portable External Hard Drive (Passport) Hard disk drives
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 403 PKR--
Passport Portable External Hard Drive (Passport) Hard disk drives
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 514.8 PKR--
Ram Memory module cards
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 140 PKR--
Ram Memory module cards
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 140 PKR--
Ram Memory module cards
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 247.5 PKR--
Ram Memory module cards
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 357.5 PKR--
Ram Memory module cards
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 492.5 PKR--
Ram Memory module cards
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 578.5 PKR--
LED Tube Rod Fluorescent lamps
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 459 PKR--
Led Bulb Light emitting diode LED lamp
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 175 PKR--
Led Penal/Ceiling Light Light emitting diode LED fixture
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 2675 PKR--
Mineral Water Bottle Water
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2000/Qty
2000/Qty 1340 PKR--
Juice Box Shelf stable juice
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2000/Qty
2000/Qty 1680 PKR--
Juice Box Shelf stable juice
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2000/Qty
2000/Qty 1100 PKR--
Biscuit Sweet biscuits or cookies/Croissants
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2000/Qty
2000/Qty 300 PKR--
Biscuit Sweet biscuits or cookies/Croissants
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2000/Qty
2000/Qty 800 PKR--
Complaint Box Hanging rails or holders
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 416 PKR--
Electric Insect Killer Insecticides
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 58 PKR--
Electric Kettle Domestic pizelle or cookie maker
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 24.75 PKR--
Needle Cutter Paper cutters or refills
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 24.75 PKR--
Nylon Rope (Rassi) Nylon rope
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 32.5 PKR--
Pad Lock Padlocks
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 45.5 PKR--
Pad Lock Padlocks
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 52 PKR--
Wire Lock Cable locks
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 4.25 PKR--
Strips Transparent tape
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 20 PKR--
Printer Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 410 PKR--
Printer Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 330 PKR--
Printer Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 330 PKR--
Printer Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 480 PKR--
Printer Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 450 PKR--
Printer Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 410 PKR--
Printer Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 2850 PKR--
Printer Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 350 PKR--
Printer Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 3500 PKR--
Printer Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 300/Qty
300/Qty 14100 PKR--
Printer Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 660 PKR--
Printer Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 300/Qty
300/Qty 25200 PKR--
Printer Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 3000 PKR--
Photocopier Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 5880 PKR--
Printer Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 2240 PKR--
Printer Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 4200 PKR--
Drum Printer or facsimile or photocopier drums
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 760 PKR--
Drum Printer or facsimile or photocopier drums
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 20/Qty
20/Qty 760 PKR--
Drum Printer or facsimile or photocopier drums
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 1190 PKR--
Photocopier Toner Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 540 PKR--
BizHub Toner 185 Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 660 PKR--
BizHub Toner 215 Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 295 PKR--
Riso Master Roll Printer ribbon
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 566.4 PKR--
Riso Master INK Printer ribbon
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 342.2 PKR--
Riso Master Roll Printer ribbon
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 708 PKR--
Riso Master INK Printer ribbon
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 566.4 PKR--
Refill of Tonners (Any Tonner) Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 150 PKR--
Printer Toner HP-80-A Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 205 PKR--
Printer Toner HP-83-A Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 165 PKR--
Printer Toner HP-85-A Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 165 PKR--
Printer Toner HP-15-A Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 240 PKR--
Printer Toner HP-53-A Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 225 PKR--
Printer Toner HP-05-A Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 205 PKR--
Printer Toner Color 131-A (4-Color Set) Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 1425 PKR--
Printer Toner HP-30-A Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 175 PKR--
Printer Toner HP-17-A Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 1750 PKR--
Printer Toner HP-107-A Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 2350 PKR--
Printer Toner HP-59-A Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 330 PKR--
Printer Toner HP-151A (For HP-4103 Printer) Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 4200 PKR--
Printer Toner Canon-051 Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 2843.7 PKR--
Photocopier Toner Canon NPG-73 Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 5705.1 PKR--
Printer Toner Canon-337 Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 2631.9 PKR--
Printer Toner Canon Color 045 (4-Color Set) Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 12273.6 PKR--
Drum Drum 19-A Original Printer or facsimile or photocopier drums
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 190 PKR--
Drum Drum 32-A Original Printer or facsimile or photocopier drums
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 190 PKR--
Drum 051-A Drum Original Printer or facsimile or photocopier drums
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 595 PKR--
Photocopier Toner Ricoh MP 1900 Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 540 PKR--
BizHub Toner 185 Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 660 PKR--
BizHub Toner 215 Original Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 5/Qty
5/Qty 295 PKR--
Riso Master Roll F11 Types (S.No.8130UA) for EZ-371 Original Printer ribbon
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 6350 PKR--
Riso Ink F11 Types (S.No.8113UA) for EZ-371 Original Printer ribbon
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 3500 PKR--
Riso Master Roll F11 Types (S.No.81892UA) for SF-5130 Original Printer ribbon
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 1/Qty
1/Qty 1000 PKR--
Riso Ink F11 Types (S.No.8113UA) for SF-5130 Original Printer ribbon
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 5900 PKR--
Wet Mop (Posharay) Large Dust mops
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 10/Qty
10/Qty 3500 PKR--
Refill Steel Puchara 500GSM Dust mops
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 1500 PKR--
Dry Mop Large Dust mops
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 910 PKR--
Viper (Best Quality) Small Sponges
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 1690 PKR--
Viper (Best Quality) Medium Sponges
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 940 PKR--
Viper (Best Quality) Large Sponges
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 1040 PKR--
Bathroom Cleaner (Harpic or Equivalent) 500ml Toilet cleaners
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 790 PKR--
Acid Bottles (Local)500ml General purpose cleaners
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 110 PKR--
Surf (Bonus or Equivalent) 0.5 Kg Laundry products
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 276 PKR--
Antiseptic Liquid (Dettol or Equivalent)100ml Laundry products
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 1290 PKR--
Hand wash Bottle 500ml Soaps
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 580 PKR--
Soap for washrooms (Lux of Equivalent) 125gm Soaps
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 390 PKR--
Phenyl (Finis or Equivalent) 3 Liter General purpose cleaners
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 880 PKR--
Scotch Brite Sponge Small Sponges
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 170 PKR--
Scrapper Small Scouring pads
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 590 PKR--
Dish wash Liquid (Lemon Max or Equivalent) 425ml Dishwashing products
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 1140 PKR--
Trash Bag Dustbin Yellow/Blue/Red/White 4’ Plastic bags
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 780 PKR--
Trash Bag Dustbin Yellow/Blue/Red/White 3’ Plastic bags
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 780 PKR--
Trash Bag Dustbin Yellow/Blue/Red/White 2’ Plastic bags
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 780 PKR--
Washroom cleaning brush Medium Cleaning brushes
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 590 PKR--
Water Bucket X-Large Cleaning pails or buckets
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 5840 PKR--
Gloves for cleaning (Local) Box Protective gloves
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/box
100/box 4600 PKR--
Broom Goua 400GSM Brooms
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 360 PKR--
Broom Soft with Plastic Grip Each Brooms
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 830 PKR--
Water Dispenser Bottle 19 Liter Food service trays
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 100/Qty
100/Qty 2250 PKR--
Door Mate (Rubber) (48” x 30”) Large Door mats
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 1000 PKR--
Door Mate (Rubber) (26” x 19”) Small Door mats
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 1500 PKR--
Dustbin Foot Step Plastic Small Waste containers or rigid liners
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 2950 PKR--
Dustbin Foot Step Plastic Large Waste containers or rigid liners
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 50/Qty
50/Qty 5250 PKR--
Dust Pan (Pure Plastic) Medium Dust brushes or pans
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 40/Qty
40/Qty 304 PKR--
Commode Cleaning Brush Standard Cleaning brushes
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 40/Qty
40/Qty 300 PKR--
Double Bucket Trolley Pak Made China Standard Cleaning dusters
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 40/Qty
40/Qty 17400 PKR--
BRANDED LAPTOP Notebook computer
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 17200 PKR1 Years
BRANDED LAPTOP Notebook computer
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 20784 PKR1 Years
BRANDED DESKTOP COMPUTER Notebook computer
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 19488 PKR1 Years
BRANDED DESKTOP COMPUTER Notebook computer
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 8000 PKR1 Years
BRANDED DESKTOP COMPUTER Notebook computer
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 24640 PKR1 Years
BRANDED SCANNER Scanners
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 8176 PKR1 Years
PRINTER (BLACK) Laser printers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 7504 PKR1 Years
Toner for the Same Printer Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 313.6 PKR1 Years
COLOR PRINTER Multi function printers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 8400 PKR1 Years
Toner for the Same Printer Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 2040 PKR1 Years
PRINTER ALL IN ONE 30PPM Multi function printers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 10640 PKR1 Years
Toner for the Same Printer Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 792 PKR1 Years
Toner for the Same Printer Printer or facsimile toner
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 6720 PKR1 Years
PRINTER ALL IN ONE 40PPM Laser printers
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 14336 PKR1 Years
MULTIMEDIA PROJECTOR WITH SCREEN (Laser) Multimedia projectors
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 6720 PKR1 Years
MULTIMEDIA PROJECTOR WITH SCREEN (Lamp) Multimedia projectors
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 11760 PKR1 Years
LCD-19" Televisions
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 2688 PKR1 Years
LCD-22" Televisions
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 3136 PKR1 Years
LCD-24" Televisions
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 3920 PKR1 Years
LCD-27" Televisions
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 5040 PKR1 Years
Chromebook (Brand New) Notebook computer
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 10000 PKR1 Years
Chromebook (Refurbish) Notebook computer
Address: Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory Schedule: 27 Days Quantity: 2/Qty
2/Qty 7600 PKR1 Years

Related Services of Goods:

No

Items/Lot Specification

Items Without Lots :

Item: Ball Point 0.8mm Piano (or equivalent)

UNSPSC: Ball point pens

Specifications / Requirementsss:

Ball Point 0.8mm Piano (or equivalent)

Item: Ball Point (Clipper Dollar (or equivalent)

UNSPSC: Ball point pens

Specifications / Requirementsss:

Clipper Dollar (or equivalent)

Item: Gel Pen

UNSPSC: Gel pens

Specifications / Requirementsss:

Uniball Signo (or equivalent)

Item: Ball Pen

UNSPSC: Ball point pens

Specifications / Requirementsss:

Uniball Original 150/157 (or equivalent)

Item: Pointer

UNSPSC: Pointers

Specifications / Requirementsss:

Dollar Plus 0.3MM or Equivalent

Item: Permanent Marker

UNSPSC: Markers

Specifications / Requirementsss:

Dollar or equivalent

Item: White Board Marker

UNSPSC: Markers

Specifications / Requirementsss:

(Snowman) (or equivalent)

Item: Highlighter

UNSPSC: Highlighters

Specifications / Requirementsss:

Text marker Pelikan 490 (Highlighter) (or equivalent)

Item: Fluid Pen

UNSPSC: Correction fluid

Specifications / Requirementsss:

Uni Correction Pen (or equivalent)

Item: Ring Binder

UNSPSC: Binders

Specifications / Requirementsss:

CS-647 (or equivalent)

Item: Binder Clip

UNSPSC: Paper clips

Specifications / Requirementsss:

25 mm (Deli) (or equivalent)

Item: Binder Clip

UNSPSC: Paper clips

Specifications / Requirementsss:

32 mm (Deli) (or equivalent)

Item: Binding Sheet

UNSPSC: Sheet protectors

Specifications / Requirementsss:

Plastic A4 Size (180 Micron) IBCO (or equivalent)

Item: Binding tape

UNSPSC: Binding covers

Specifications / Requirementsss:

2”x 13 Meters (Quality Brand) (or equivalent)

Item: Dollar Ink

UNSPSC: Ink refills

Specifications / Requirementsss:

60ML (Blue, Black, Red & Green

Item: Stamp Automatic

UNSPSC: Stamps

Specifications / Requirementsss:

Printy4912 or equivalent

Item: Stamp Automatic

UNSPSC: Stamps

Specifications / Requirementsss:

Shiny 843 (or equivalent)

Item: Ink for Automatic Stamp

UNSPSC: Stamps

Specifications / Requirementsss:

Ink for Automatic Stamp

Item: Manual Stamp

UNSPSC: Stamps

Specifications / Requirementsss:

Manual Stamp

Item: Stamp Pad

UNSPSC: Stamps

Specifications / Requirementsss:

Lancer (or equivalent)

Item: Single Hole Punch

UNSPSC: Paper or eyelet punches

Specifications / Requirementsss:

Steel With Soft Grip (or equivalent)

Item: Double Hole Punch Small

UNSPSC: Paper or eyelet punches

Specifications / Requirementsss:

Gest GP-4007 or equivalent

Item: Double Hole Punch Large

UNSPSC: Paper or eyelet punches

Specifications / Requirementsss:

KW-Trio or equivalent

Item: Glue Stick Small

UNSPSC: Acid free glue sticks

Specifications / Requirementsss:

21GSM (Dollar or equivalent)

Item: Glue Stick Large

UNSPSC: Acid free glue sticks

Specifications / Requirementsss:

40GSM (Dollar or equivalent)

Item: Paper Tape

UNSPSC: Paper tapes

Specifications / Requirementsss:

3” x 35 Yds. (ABRO) (or equivalent)

Item: Paper Tape

UNSPSC: Paper tapes

Specifications / Requirementsss:

2” x 35 Yds. (ABRO) (or equivalent)

Item: Paper Tape

UNSPSC: Paper tapes

Specifications / Requirementsss:

(Brown) 1” x72 P.V.C. (Nichiban) (or equivalent)

Item: Packing Tape

UNSPSC: Packaging tape

Specifications / Requirementsss:

(Brown) 2” x72 P.V.C. (Nichiban) (or equivalent)

Item: Packing Tape

UNSPSC: Packaging tape

Specifications / Requirementsss:

(Brown) 3” x72 P.V.C. (Nichiban) (or equivalent)

Item: Scotch Tape Transparent

UNSPSC: Transparent tape

Specifications / Requirementsss:

1" Abro 1 x 50 Yds (or equivalent)

Item: Scotch Tape Transparent

UNSPSC: Transparent tape

Specifications / Requirementsss:

2" Abro 1 x 50 Yds (or equivalent)

Item: Scotch Tape Transparent

UNSPSC: Transparent tape

Specifications / Requirementsss:

3" Abro 1 x 50 Yds (or equivalent)

Item: Scotch Tape Dispenser (Small)

UNSPSC: Tape dispensers

Specifications / Requirementsss:

K.W. No.3310 (or equivalent)

Item: Scotch Tape Dispenser (Large)

UNSPSC: Tape dispensers

Specifications / Requirementsss:

K.W. No.3311 (or equivalent)

Item: Foot Scale

UNSPSC: Rulers

Specifications / Requirementsss:

12” Steel

Item: ID Card Dori

UNSPSC: Protective coveralls

Specifications / Requirementsss:

Dark Blue

Item: Plastic Card Pouch

UNSPSC: Protective coveralls

Specifications / Requirementsss:

Plastic Card Pouch

Item: Note Sheet A4

UNSPSC: Printer or copier paper

Specifications / Requirementsss:

A4 Size 80 Gram (80 Sheets) (Imported Paper) (or equivalent)

Item: Note Sheet Legal

UNSPSC: Printer or copier paper

Specifications / Requirementsss:

Legal Size 80 Gram (80 Sheets) (Imported Paper) (or equivalent)

Item: Envelop Small (Plain)

UNSPSC: Mailers

Specifications / Requirementsss:

(9"x4") White Color

Item: Envelop A4 (Plain)

UNSPSC: Mailers

Specifications / Requirementsss:

A4 White Color 80GSM

Item: Envelop Legal (Plain)

UNSPSC: Mailers

Specifications / Requirementsss:

Legal White Color 80GSM

Item: Envelop Extra Large (Plain)

UNSPSC: Mailers

Specifications / Requirementsss:

Extra Large White Color 80GSM

Item: Paper Clip Large

UNSPSC: Paper clips

Specifications / Requirementsss:

26mm 3 Flower (or equivalent)

Item: Paper Clip Small

UNSPSC: Paper clips

Specifications / Requirementsss:

36mm 3 Flower (or equivalent)

Item: Common Pin

UNSPSC: Pins or tacks

Specifications / Requirementsss:

(Elephant) 28 Gram (or equivalent)

Item: Pin Opener

UNSPSC: Scissors

Specifications / Requirementsss:

KW-5080 or equivalent

Item: Notice Board Pin

UNSPSC: Pins or tacks

Specifications / Requirementsss:

Notice Board Pin colored

Item: Paper/Knife Cutter

UNSPSC: Paper cutters or refills

Specifications / Requirementsss:

SDI No. 426 (or equivalent)

Item: Scissor Large

UNSPSC: Scissors

Specifications / Requirementsss:

K.W. X- 017 (or equivalent)

Item: Scissor Small

UNSPSC: Scissors

Specifications / Requirementsss:

(Small) K.W. Superior (or equivalent)

Item: Lead Pencil

UNSPSC: Wooden pencils

Specifications / Requirementsss:

Goldfish-5000 Executive (or equivalent)

Item: Pencil Sharpener

UNSPSC: Manual pencil sharpener

Specifications / Requirementsss:

Deli or equivalent

Item: Sharpener Plastic

UNSPSC: Manual pencil sharpener

Specifications / Requirementsss:

Germany (or equivalent)

Item: Eraser

UNSPSC: Erasers

Specifications / Requirementsss:

AL-30 Pelikan (or equivalent)

Item: Pen Stand Marble

UNSPSC: Pen or pencil holders

Specifications / Requirementsss:

(Large)

Item: Drafting Pad Small

UNSPSC: Paper pads or notebooks

Specifications / Requirementsss:

Small Lucky or equivalent

Item: Drafting Pad Medium

UNSPSC: Paper pads or notebooks

Specifications / Requirementsss:

Lucky or equivalent

Item: Drafting Pad Large

UNSPSC: Paper pads or notebooks

Specifications / Requirementsss:

Lucky or equivalent

Item: Attendance Register

UNSPSC: Log books or pads

Specifications / Requirementsss:

Register No.02

Item: Attendance Register

UNSPSC: Log books or pads

Specifications / Requirementsss:

Register No.06

Item: Stock/Issue Register

UNSPSC: Log books or pads

Specifications / Requirementsss:

Register No.08

Item: Stock/Issue Register

UNSPSC: Log books or pads

Specifications / Requirementsss:

Register No.10

Item: Stock/Issue Register

UNSPSC: Log books or pads

Specifications / Requirementsss:

Register No.12

Item: Ledger Register

UNSPSC: Log books or pads

Specifications / Requirementsss:

Register 8Nos (Tayyaba or equivalent)

Item: Dispatch Regiser

UNSPSC: Log books or pads

Specifications / Requirementsss:

Register No.08 (Tayyaba or equivalent)

Item: Salary Register

UNSPSC: Log books or pads

Specifications / Requirementsss:

No.10 Printed

Item: Register Imported

UNSPSC: Log books or pads

Specifications / Requirementsss:

06Nos (Imported) (Tayyaba or equivalent)

Item: Register Imported

UNSPSC: Log books or pads

Specifications / Requirementsss:

08Nos (Imported) (Tayyaba or equivalent)

Item: Register Imported

UNSPSC: Log books or pads

Specifications / Requirementsss:

10Nos (Imported) (Tayyaba or equivalent)

Item: Register Imported

UNSPSC: Log books or pads

Specifications / Requirementsss:

12Nos (Imported) (Tayyaba or equivalent)

Item: Register Imported

UNSPSC: Log books or pads

Specifications / Requirementsss:

20Nos (Imported) (Tayyaba or equivalent)

Item: Peon Book

UNSPSC: Log books or pads

Specifications / Requirementsss:

Peon Book 96 Pages

Item: Log Book 6 Nos

UNSPSC: Log books or pads

Specifications / Requirementsss:

Log Book No.06 (Tayyaba or equivalent)

Item: Movement Register

UNSPSC: Log books or pads

Specifications / Requirementsss:

Register 08Nos (Tayyaba or equivalent)

Item: Lamination Sheets A4

UNSPSC: Laminator pouches

Specifications / Requirementsss:

IBCO Product A4 (Packet of 100 Sheets) (or equivalent)

Item: Lamination Sheets Legal

UNSPSC: Laminator pouches

Specifications / Requirementsss:

IBCO Product Legal (Packet of 100 Sheets) (or equivalent)

Item: Color Paper

UNSPSC: Printer or copier paper

Specifications / Requirementsss:

(100 Gram Imported 100 Sheets (Superior Quality) (or equivalent) different color

Item: Box File

UNSPSC: Box file

Specifications / Requirementsss:

Imperial/ Executive Rex3” (Imported) or equivalent

Item: File Board

UNSPSC: Folders

Specifications / Requirementsss:

File Size (Shaheen or equivalent)

Item: File Cover Plastic

UNSPSC: Folders

Specifications / Requirementsss:

350 GMS Blue Card Board Imported (As per sample)

Item: File Separator Set

UNSPSC: File inserts or tabs

Specifications / Requirementsss:

Set 10 Pieces Lucky (or equivalent)

Item: File Flag

UNSPSC: Binder pockets or accessories

Specifications / Requirementsss:

Different Colors (or equivalent)

Item: Photostat Paper A4

UNSPSC: Printer or copier paper

Specifications / Requirementsss:

70GSM A4 Size Imported (Paper One) 500 Sheets (or equivalent)

Item: Photostat Paper Legal

UNSPSC: Printer or copier paper

Specifications / Requirementsss:

70GSM Legal Size Imported (Paper One/Excellent) 500 Sheets (or equivalent)

Item: Paper Ream A4

UNSPSC: Printer or copier paper

Specifications / Requirementsss:

80GSM A4 size (Imported) 500 Sheet (Paper One/Excellent) (or equivalent)

Item: Paper Ream A4

UNSPSC: Printer or copier paper

Specifications / Requirementsss:

80GSM A4 size (Imported) 500 Sheet ( e A or equivalent)

Item: Paper Ream Legal

UNSPSC: Printer or copier paper

Specifications / Requirementsss:

80GSM Legal size (Imported) Size 500 sheets (Paper One/Excellent) (or equivalent)

Item: Paper Ream A4

UNSPSC: Printer or copier paper

Specifications / Requirementsss:

100GSM A4 size (Imported) 500 sheets (Brilliant White Superior/Excellent) (or equivalent)

Item: Plastic File/Report cover

UNSPSC: Folders

Specifications / Requirementsss:

Top Transparent A4 Size Nokya No. 554 ( In light blue, light green, and pink colors) (or equivalent)

Item: Sticky Note

UNSPSC: Self adhesive note paper

Specifications / Requirementsss:

3”x2” PRONOTI (or equivalent)

Item: Sticky Note

UNSPSC: Self adhesive note paper

Specifications / Requirementsss:

3”x3” PRONOTI (or equivalent)

Item: File Tags

UNSPSC: Binder pockets or accessories

Specifications / Requirementsss:

File Tags Small 12"

Item: Color Flags

UNSPSC: Binder pockets or accessories

Specifications / Requirementsss:

PRONOTI (or equivalent)

Item: Photo Glassy Paper Sheet

UNSPSC: Printer or copier paper

Specifications / Requirementsss:

200/210 GM (Superior Quality) (or equivalent)

Item: Ring File

UNSPSC: Binders

Specifications / Requirementsss:

D 2 Ring Xing PVC 1314 NK (Nokya) (Blue & White) A4 Size (or equivalent)

Item: Ring File

UNSPSC: Binders

Specifications / Requirementsss:

D 2 Ring (Nokya) No.1444 A4 Size (Blue & White) 25 mm. (or equivalent)

Item: Rubber Band

UNSPSC: Rubber bands

Specifications / Requirementsss:

(Superior Quality)

Item: Stamp Pad Ink

UNSPSC: Stamps

Specifications / Requirementsss:

Crystal (or equivalent)

Item: Staple Machine (Small)

UNSPSC: Staplers

Specifications / Requirementsss:

(45-N or Equivalent)

Item: Staple Machine (Heavy Duty)

UNSPSC: Staplers

Specifications / Requirementsss:

(M&G ABS92806 or equivalent)

Item: Staple Pin 24/6

UNSPSC: Staples

Specifications / Requirementsss:

24/6 Pkt. of 1000 Staples (Dollar or equivalent)

Item: Stapler Pins 23/17

UNSPSC: Staples

Specifications / Requirementsss:

23/13 (Dollar or equivalent)

Item: Stapler Pins 23/13

UNSPSC: Staples

Specifications / Requirementsss:

23/13 (Dollar or equivalent)

Item: Stapler Pins 23/10

UNSPSC: Staples

Specifications / Requirementsss:

23/10 (Dollar or equivalent)

Item: Stapler Pins 23/8

UNSPSC: Staples

Specifications / Requirementsss:

23/8 (Dollar or equivalent)

Item: Table Diary

UNSPSC: Diaries or refills

Specifications / Requirementsss:

Friend (or equivalent)

Item: Table Set Rexine

UNSPSC: Desktop trays or organizers

Specifications / Requirementsss:

Rexene Klingon No.5 (or equivalent)

Item: Table Set (Marble)

UNSPSC: Desktop trays or organizers

Specifications / Requirementsss:

(Marble) 09 Pieces Superior (or equivalent)

Item: UHU Tube 35 ml.

UNSPSC: Glues

Specifications / Requirementsss:

35 ml. (or equivalent)

Item: UHU Tube 60 ml.

UNSPSC: Glues

Specifications / Requirementsss:

60 ml. (or equivalent)

Item: UHU Tube 125 mI.

UNSPSC: Glues

Specifications / Requirementsss:

60 ml. (or equivalent)

Item: Visiting Card Holder

UNSPSC: Business card holders

Specifications / Requirementsss:

Album Orion (192 Packets) (or equivalent)

Item: Visiting Card Case

UNSPSC: Business card holders

Specifications / Requirementsss:

Superior or equivalent

Item: White Board

UNSPSC: Dry erase boards or accessories

Specifications / Requirementsss:

Size: 3’ X 2’ Feet White Glossy Formic Pressed On Particle Board With All Around Aluminum Channel With Duster

Item: White board

UNSPSC: Dry erase boards or accessories

Specifications / Requirementsss:

Size: 3’ X 4’ Feet White Glossy Formic Pressed On Particle Board With All Around Aluminum Channel With Duster

Item: White Board Stand

UNSPSC: Tables

Specifications / Requirementsss:

White Board Stand

Item: Duster for white Board

UNSPSC: Whiteboard eraser

Specifications / Requirementsss:

Superior Quality

Item: Notice Board

UNSPSC: Bulletin boards or accessories

Specifications / Requirementsss:

Notice Board with Blazer Cloth, Size 2'x3' .

Item: Notice Board

UNSPSC: Bulletin boards or accessories

Specifications / Requirementsss:

Notice Board with Blazer Cloth, Size 3'x4' .

Item: Water Dumper

UNSPSC: Food service trays

Specifications / Requirementsss:

Round Omega or equivalent

Item: Laptop Bag

UNSPSC: Computer bags

Specifications / Requirementsss:

Best quality leather (or equivalent)

Item: Photo Paper

UNSPSC: Printer or copier paper

Specifications / Requirementsss:

A4 (50 sheets) 260GSM

Item: Clear Bag

UNSPSC: Zipper bag

Specifications / Requirementsss:

With button (White & Colored)

Item: Table Scheduler Stand

UNSPSC: Calendars

Specifications / Requirementsss:

A4 Size best quality

Item: Table Calendar

UNSPSC: Calendars

Specifications / Requirementsss:

Best quality

Item: Table Tray

UNSPSC: Desktop trays or organizers

Specifications / Requirementsss:

Plastic (Somo or equivalent)

Item: L Shap Folder A4

UNSPSC: Folders

Specifications / Requirementsss:

L Shap Folder A4

Item: Calculator (12- Digits)

UNSPSC: Adding machines

Specifications / Requirementsss:

(12- Digits) Casio (or equivalent)

Item: Calculator (14- Digits)

UNSPSC: Adding machines

Specifications / Requirementsss:

(14- Digits) Casio (or equivalent)

Item: Duster Yellow

UNSPSC: Paper cutters or refills

Specifications / Requirementsss:

Size 1/2 Meter (or equivalent)Enamel 3.65 liter (Dulux/ICI/Berger) (or equivalent)

Item: File Tray /Basket

UNSPSC: Desktop trays or organizers

Specifications / Requirementsss:

Plastic (Somo or equivalent)

Item: Remote Bell/Peon Bell

UNSPSC: Sirens

Specifications / Requirementsss:

Excellent/Voye (or equivalent)

Item: Dust Bin Large

UNSPSC: Waste containers or rigid liners

Specifications / Requirementsss:

(Large) Nylon

Item: Dust Bin Medium

UNSPSC: Waste containers or rigid liners

Specifications / Requirementsss:

(Medium) Nylon

Item: Glass /Wood Cleaner

UNSPSC: Glass or window cleaners

Specifications / Requirementsss:

500ml Original (Glint/KIWI or equivalent)

Item: Air freshened

UNSPSC: Air freshener

Specifications / Requirementsss:

300 ml or (Kiwi/Do It equivalent)

Item: Insect Killer

UNSPSC: Insecticides

Specifications / Requirementsss:

(400 ml) (Mortin or equivalent)

Item: Pencil Cell

UNSPSC: Alkaline batteries

Specifications / Requirementsss:

AA (Toshiba/Sony or equivalent)

Item: Pencil Cell

UNSPSC: Alkaline batteries

Specifications / Requirementsss:

AAA (Toshiba/Sony) (or equivalent)

Item: Cell

UNSPSC: Alkaline batteries

Specifications / Requirementsss:

AA (Power Plus or equivalent)

Item: Cell

UNSPSC: Alkaline batteries

Specifications / Requirementsss:

AAA (Power Plus or equivalent)

Item: Table Cloth Velvet

UNSPSC: Napkins

Specifications / Requirementsss:

Vevet (Green) per meter (or equivalent) Superior Quality

Item: Table Glass

UNSPSC: Domestic tumble dryers

Specifications / Requirementsss:

Size=5 mm per Sq. Ft. (or equivalent)

Item: Tissue Paper

UNSPSC: Paper towels

Specifications / Requirementsss:

2x ply Rose Petal/Misk Luxury 200 Sheets (or equivalent)

Item: Toilet Roll

UNSPSC: Toilet tissue

Specifications / Requirementsss:

(Rose Petal) (Super soft single-pack packages) (or equivalent)

Item: Face Mask

UNSPSC: Masks or accessories

Specifications / Requirementsss:

(3-ply, 17.5 cmx9.5cm)

Item: Hand Gloves Small

UNSPSC: Protective gloves

Specifications / Requirementsss:

Powdered (Latex or equivalent)

Item: Hand Gloves Medium

UNSPSC: Protective gloves

Specifications / Requirementsss:

Powdered (Latex or equivalent)

Item: Hand Gloves Large

UNSPSC: Protective gloves

Specifications / Requirementsss:

Powdered (Latex or equivalent)

Item: Hand Gloves Small

UNSPSC: Protective gloves

Specifications / Requirementsss:

Non-Powdered (Latex or equivalent)

Item: Hand Gloves Medium

UNSPSC: Protective gloves

Specifications / Requirementsss:

Non-Powdered (Latex or equivalent)

Item: Hand Gloves Large

UNSPSC: Protective gloves

Specifications / Requirementsss:

Non-Powdered (Latex or equivalent)

Item: Towel White (Small)

UNSPSC: Hand towels

Specifications / Requirementsss:

Large Size (Superior Quality) (Al-Karam or equivalent)

Item: Towel White (Large)

UNSPSC: Hand towels

Specifications / Requirementsss:

Large Size (Superior Quality) (Al-Karam or equivalent)

Item: Wall Clock

UNSPSC: Wall clocks

Specifications / Requirementsss:

(Champion/Power/SIMCO or equivalent)

Item: Electric Extension 05 Meters

UNSPSC: Electrical plugs

Specifications / Requirementsss:

Meters (With Ten Points) Best Quality

Item: Electric Extension 10 Meters

UNSPSC: Electrical plugs

Specifications / Requirementsss:

10 Meters (With Ten Points) Best Quality

Item: Steno Set with CLI

UNSPSC: Analog telephones

Specifications / Requirementsss:

Panasonic or equivalent

Item: Telephone Set with CLI

UNSPSC: Analog telephones

Specifications / Requirementsss:

(Panasonic or equivalent)

Item: Key Boards (USB Port, PS/2)

UNSPSC: Keyboards

Specifications / Requirementsss:

(USB Port, PS/2) Dell/HP (HP or equivalent)

Item: Mouse Wireless

UNSPSC: Computer mouse

Specifications / Requirementsss:

Dell/HP or equivalent

Item: Mouse Wired

UNSPSC: Computer mouse

Specifications / Requirementsss:

Dell/HP (or equivalent

Item: Flash Drive 3.2

UNSPSC: Pen or flash drive

Specifications / Requirementsss:

3.2 8GB Kingston or equivalent

Item: Flash Drive 3.2

UNSPSC: Pen or flash drive

Specifications / Requirementsss:

3.2 16GB Kingston or equivalent

Item: Flash Drive 3.2

UNSPSC: Pen or flash drive

Specifications / Requirementsss:

3.2 32GB Kingston or equivalent

Item: Flash Drive 3.2

UNSPSC: Pen or flash drive

Specifications / Requirementsss:

Kingston or equivalent 3.2 64GB

Item: USB Extension Lead for Data Cable

UNSPSC: Computer cable

Specifications / Requirementsss:

5 Meter

Item: CD (R) 700 MB

UNSPSC: Compact disks CDs

Specifications / Requirementsss:

CD (R) 700 MB Sony (or equivalent)

Item: DVD (R) 4.7

UNSPSC: Blank tapes

Specifications / Requirementsss:

(Causing Individual) DVD (R) 4.7 GB Sony (or equivalent)

Item: DVD (R) 8 GB

UNSPSC: Blank tapes

Specifications / Requirementsss:

DVD (R) 8.00 GB DVD (RW) 8.00 GB (Sony or equivalent)

Item: Printer Data Cable (USB)

UNSPSC: Signal cable

Specifications / Requirementsss:

Printer Data Cable (USB)

Item: Wifi Adaptor

UNSPSC: Network routers

Specifications / Requirementsss:

(Alfa or Equivalent)

Item: LCD Display VGA Cable

UNSPSC: Signal cable

Specifications / Requirementsss:

(Standard Size)

Item: HDMI Cable

UNSPSC: Signal cable

Specifications / Requirementsss:

05 Meters

Item: HDMI Cable

UNSPSC: Signal cable

Specifications / Requirementsss:

15 Meters

Item: HDMI Cable

UNSPSC: Signal cable

Specifications / Requirementsss:

20 Meters

Item: HDMI Cable

UNSPSC: Signal cable

Specifications / Requirementsss:

30 Meters

Item: HDMI Cable

UNSPSC: Signal cable

Specifications / Requirementsss:

50 Meters

Item: Internet Cable

UNSPSC: Network cable

Specifications / Requirementsss:

3 Meters with Connectors UTP Cat-6.6 mm (or equivalent)

Item: internet Cable

UNSPSC: Network cable

Specifications / Requirementsss:

6 Meters with Connectors UTP Cat-6.6 mm (or equivalent)

Item: Internet Cable

UNSPSC: Network cable

Specifications / Requirementsss:

10 Meters with Connectors UTP Cat-6.6 mm (or equivalent)

Item: Internet Routed

UNSPSC: Network routers

Specifications / Requirementsss:

300 Mbps (Three Antena) TP-Link/Tenda (or equivalent)

Item: Passport Portable External Hard Drive (Passport)

UNSPSC: Hard disk drives

Specifications / Requirementsss:

1TB Sata USB 3.0

Item: Passport Portable External Hard Drive (Passport)

UNSPSC: Hard disk drives

Specifications / Requirementsss:

2TB Sata USB 3.0

Item: Ram

UNSPSC: Memory module cards

Specifications / Requirementsss:

4GB DDR-3

Item: Ram

UNSPSC: Memory module cards

Specifications / Requirementsss:

4GB DDR-4

Item: Ram

UNSPSC: Memory module cards

Specifications / Requirementsss:

8GB DDR-3

Item: Ram

UNSPSC: Memory module cards

Specifications / Requirementsss:

8GB DDR-4

Item: Ram

UNSPSC: Memory module cards

Specifications / Requirementsss:

16GB DDR-3

Item: Ram

UNSPSC: Memory module cards

Specifications / Requirementsss:

16GB DDR-4

Item: LED Tube Rod

UNSPSC: Fluorescent lamps

Specifications / Requirementsss:

08 Watt 2 Feet (Osaka or equivalent)

Item: Led Bulb

UNSPSC: Light emitting diode LED lamp

Specifications / Requirementsss:

18 Watt (Osaka or equivalent)

Item: Led Penal/Ceiling Light

UNSPSC: Light emitting diode LED fixture

Specifications / Requirementsss:

48 Watt 2 Feet Aluminum Frame (600x600mm) (Osaka or equivalent)

Item: Mineral Water Bottle

UNSPSC: Water

Specifications / Requirementsss:

500ml Nestle/Aquafina or Equivalent

Item: Juice Box

UNSPSC: Shelf stable juice

Specifications / Requirementsss:

Nestle Nesfruta Mango Juice (or Equivalent) 200ml

Item: Juice Box

UNSPSC: Shelf stable juice

Specifications / Requirementsss:

Slice Mango Juice (or Equivalent) 200 ml

Item: Biscuit

UNSPSC: Sweet biscuits or cookies/Croissants

Specifications / Requirementsss:

Peek Freans Sooper (or Equivalent) Ticky 24Pcs Pack Box

Item: Biscuit

UNSPSC: Sweet biscuits or cookies/Croissants

Specifications / Requirementsss:

LU Candi Original (or Equivalent) 24 Ticky Pack Box

Item: Complaint Box

UNSPSC: Hanging rails or holders

Specifications / Requirementsss:

Acrylic Size: 1’x1’

Item: Electric Insect Killer

UNSPSC: Insecticides

Specifications / Requirementsss:

Medium China or Equivalent

Item: Electric Kettle

UNSPSC: Domestic pizelle or cookie maker

Specifications / Requirementsss:

1.25 Liter (Steel Body) Philips or Equivalent

Item: Needle Cutter

UNSPSC: Paper cutters or refills

Specifications / Requirementsss:

Standard Size

Item: Nylon Rope (Rassi)

UNSPSC: Nylon rope

Specifications / Requirementsss:

Best quality

Item: Pad Lock

UNSPSC: Padlocks

Specifications / Requirementsss:

Tri-circle 2 Original china made

Item: Pad Lock

UNSPSC: Padlocks

Specifications / Requirementsss:

Tri-circle 2-1/2 Original china made

Item: Wire Lock

UNSPSC: Cable locks

Specifications / Requirementsss:

Medium Size China or Equivalent

Item: Strips

UNSPSC: Transparent tape

Specifications / Requirementsss:

Adjustable Disposable Fixed Plastic Strip Tags for Bags Locking Security Plastic Seal Plastic Tag

Item: Printer Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

TonerHP-80-A China or Equivalent

Item: Printer Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Toner HP-83-A China or Equivalent

Item: Printer Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Toner HP-85-A China or Equivalent

Item: Printer Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

TonerHP-15-A China or Equivalent

Item: Printer Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

TonerHP-53-A china or equivalent

Item: Printer Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Toner HP-05-A China or Equivalent

Item: Printer Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Toner Color 131-A (4-Color Set) china or Equivalent

Item: Printer Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Toner HP-30-A China or Equivalent

Item: Printer Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

TonerHP-17-A China or Equivalent

Item: Printer Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

TonerHP-107-A China or Equivalent

Item: Printer Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Toner HP-59-A China or Equivalent

Item: Printer Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Toner HP-151A (For HP-4103 Printer) China or Equivalent

Item: Printer Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

TonerCanon-051 China or Equivalent

Item: Photocopier Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Toner Canon NPG-73 China or Equivalent

Item: Printer Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Toner Canon-337 China or Equivalent

Item: Printer Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Toner Canon Color 045 (4-Color Set) china or equivalent

Item: Drum

UNSPSC: Printer or facsimile or photocopier drums

Specifications / Requirementsss:

Drum 19-A China or Equivalent

Item: Drum

UNSPSC: Printer or facsimile or photocopier drums

Specifications / Requirementsss:

Drum 32-A China or Equivalent

Item: Drum

UNSPSC: Printer or facsimile or photocopier drums

Specifications / Requirementsss:

051-A Drum China or Equivalent

Item: Photocopier Toner

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Photocopier Toner Ricoh MP 1900

Item: BizHub Toner 185

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

BizHub Toner 185

Item: BizHub Toner 215

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

BizHub Toner 215

Item: Riso Master Roll

UNSPSC: Printer ribbon

Specifications / Requirementsss:

Riso Master Roll F11 Types (S.No.8130UA) for EZ-371

Item: Riso Master INK

UNSPSC: Printer ribbon

Specifications / Requirementsss:

Riso Ink F11 Types (S.No.8113UA) for EZ-371

Item: Riso Master Roll

UNSPSC: Printer ribbon

Specifications / Requirementsss:

Riso Master Roll F11 Types (S.No.81892UA) for SF-5130

Item: Riso Master INK

UNSPSC: Printer ribbon

Specifications / Requirementsss:

Riso Ink F11 Types (S.No.8113UA) for SF-5130

Item: Refill of Tonners (Any Tonner)

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Refill of Tonners (Any Tonner)

Item: Printer Toner HP-80-A Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer Toner HP-80-A Original

Item: Printer Toner HP-83-A Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer Toner HP-83-A Original

Item: Printer Toner HP-85-A Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer Toner HP-85-A Original

Item: Printer Toner HP-15-A Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer Toner HP-15-A Original

Item: Printer Toner HP-53-A Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer Toner HP-53-A Original

Item: Printer Toner HP-05-A Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer Toner HP-05-A Original

Item: Printer Toner Color 131-A (4-Color Set) Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer Toner Color 131-A (4-Color Set) Original

Item: Printer Toner HP-30-A Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer Toner HP-30-A Original

Item: Printer Toner HP-17-A Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer Toner HP-17-A Original

Item: Printer Toner HP-107-A Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer Toner HP-107-A Original

Item: Printer Toner HP-59-A Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer Toner HP-59-A Original

Item: Printer Toner HP-151A (For HP-4103 Printer) Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer Toner HP-151A (For HP-4103 Printer) Original

Item: Printer Toner Canon-051 Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer Toner Canon-051 Original

Item: Photocopier Toner Canon NPG-73 Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Photocopier Toner Canon NPG-73 Original

Item: Printer Toner Canon-337 Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer Toner Canon-337 Original

Item: Printer Toner Canon Color 045 (4-Color Set) Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer Toner Canon Color 045 (4-Color Set) Original

Item: Drum Drum 19-A Original

UNSPSC: Printer or facsimile or photocopier drums

Specifications / Requirementsss:

Drum Drum 19-A Original

Item: Drum Drum 32-A Original

UNSPSC: Printer or facsimile or photocopier drums

Specifications / Requirementsss:

Drum Drum 32-A Original

Item: Drum 051-A Drum Original

UNSPSC: Printer or facsimile or photocopier drums

Specifications / Requirementsss:

Drum 051-A Drum Original

Item: Photocopier Toner Ricoh MP 1900 Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Photocopier Toner Ricoh MP 1900 Original

Item: BizHub Toner 185 Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

BizHub Toner 185 Original

Item: BizHub Toner 215 Original

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

BizHub Toner 215 Original

Item: Riso Master Roll F11 Types (S.No.8130UA) for EZ-371 Original

UNSPSC: Printer ribbon

Specifications / Requirementsss:

Riso Master Roll F11 Types (S.No.8130UA) for EZ-371 Original

Item: Riso Ink F11 Types (S.No.8113UA) for EZ-371 Original

UNSPSC: Printer ribbon

Specifications / Requirementsss:

Riso Ink F11 Types (S.No.8113UA) for EZ-371 Original

Item: Riso Master Roll F11 Types (S.No.81892UA) for SF-5130 Original

UNSPSC: Printer ribbon

Specifications / Requirementsss:

Riso Master Roll F11 Types (S.No.81892UA) for SF-5130 Original

Item: Riso Ink F11 Types (S.No.8113UA) for SF-5130 Original

UNSPSC: Printer ribbon

Specifications / Requirementsss:

Riso Ink F11 Types (S.No.8113UA) for SF-5130 Original

Item: Wet Mop (Posharay) Large

UNSPSC: Dust mops

Specifications / Requirementsss:

Wet Mop (Posharay) Large

Item: Refill Steel Puchara 500GSM

UNSPSC: Dust mops

Specifications / Requirementsss:

Refill Steel Puchara 500GSM

Item: Dry Mop Large

UNSPSC: Dust mops

Specifications / Requirementsss:

Dry Mop Large

Item: Viper (Best Quality) Small

UNSPSC: Sponges

Specifications / Requirementsss:

Viper (Best Quality) Small

Item: Viper (Best Quality) Medium

UNSPSC: Sponges

Specifications / Requirementsss:

Viper (Best Quality) Medium

Item: Viper (Best Quality) Large

UNSPSC: Sponges

Specifications / Requirementsss:

Viper (Best Quality) Large

Item: Bathroom Cleaner (Harpic or Equivalent) 500ml

UNSPSC: Toilet cleaners

Specifications / Requirementsss:

Bathroom Cleaner (Harpic or Equivalent) 500ml

Item: Acid Bottles (Local)500ml

UNSPSC: General purpose cleaners

Specifications / Requirementsss:

Acid Bottles (Local)500ml

Item: Surf (Bonus or Equivalent) 0.5 Kg

UNSPSC: Laundry products

Specifications / Requirementsss:

Surf (Bonus or Equivalent) 0.5 Kg

Item: Antiseptic Liquid (Dettol or Equivalent)100ml

UNSPSC: Laundry products

Specifications / Requirementsss:

Antiseptic Liquid (Dettol or Equivalent)100ml

Item: Hand wash Bottle 500ml

UNSPSC: Soaps

Specifications / Requirementsss:

Hand wash Bottle 500ml

Item: Soap for washrooms (Lux of Equivalent) 125gm

UNSPSC: Soaps

Specifications / Requirementsss:

Soap for washrooms (Lux of Equivalent) 125gm

Item: Phenyl (Finis or Equivalent) 3 Liter

UNSPSC: General purpose cleaners

Specifications / Requirementsss:

Phenyl (Finis or Equivalent) 3 Liter

Item: Scotch Brite Sponge Small

UNSPSC: Sponges

Specifications / Requirementsss:

Scotch Brite Sponge Small

Item: Scrapper Small

UNSPSC: Scouring pads

Specifications / Requirementsss:

Scrapper Small

Item: Dish wash Liquid (Lemon Max or Equivalent) 425ml

UNSPSC: Dishwashing products

Specifications / Requirementsss:

Dish wash Liquid (Lemon Max or Equivalent) 425ml

Item: Trash Bag Dustbin Yellow/Blue/Red/White 4’

UNSPSC: Plastic bags

Specifications / Requirementsss:

Trash Bag Dustbin Yellow/Blue/Red/White 4’

Item: Trash Bag Dustbin Yellow/Blue/Red/White 3’

UNSPSC: Plastic bags

Specifications / Requirementsss:

Trash Bag Dustbin Yellow/Blue/Red/White 3’

Item: Trash Bag Dustbin Yellow/Blue/Red/White 2’

UNSPSC: Plastic bags

Specifications / Requirementsss:

Trash Bag Dustbin Yellow/Blue/Red/White 2’

Item: Washroom cleaning brush Medium

UNSPSC: Cleaning brushes

Specifications / Requirementsss:

Washroom cleaning brush Medium

Item: Water Bucket X-Large

UNSPSC: Cleaning pails or buckets

Specifications / Requirementsss:

Water Bucket X-Large

Item: Gloves for cleaning (Local) Box

UNSPSC: Protective gloves

Specifications / Requirementsss:

Gloves for cleaning (Local) Box

Item: Broom Goua 400GSM

UNSPSC: Brooms

Specifications / Requirementsss:

Broom Goua 400GSM

Item: Broom Soft with Plastic Grip Each

UNSPSC: Brooms

Specifications / Requirementsss:

Broom Soft with Plastic Grip Each

Item: Water Dispenser Bottle 19 Liter

UNSPSC: Food service trays

Specifications / Requirementsss:

Water Dispenser Bottle 19 Liter

Item: Door Mate (Rubber) (48” x 30”) Large

UNSPSC: Door mats

Specifications / Requirementsss:

Door Mate (Rubber) (48” x 30”) Large

Item: Door Mate (Rubber) (26” x 19”) Small

UNSPSC: Door mats

Specifications / Requirementsss:

Door Mate (Rubber) (26” x 19”) Small

Item: Dustbin Foot Step Plastic Small

UNSPSC: Waste containers or rigid liners

Specifications / Requirementsss:

Dustbin Foot Step Plastic Small

Item: Dustbin Foot Step Plastic Large

UNSPSC: Waste containers or rigid liners

Specifications / Requirementsss:

Dustbin Foot Step Plastic Large

Item: Dust Pan (Pure Plastic) Medium

UNSPSC: Dust brushes or pans

Specifications / Requirementsss:

Dust Pan (Pure Plastic) Medium

Item: Commode Cleaning Brush Standard

UNSPSC: Cleaning brushes

Specifications / Requirementsss:

Commode Cleaning Brush Standard

Item: Double Bucket Trolley Pak Made China Standard

UNSPSC: Cleaning dusters

Specifications / Requirementsss:

Double Bucket Trolley Pak Made China Standard

Item: BRANDED LAPTOP

UNSPSC: Notebook computer

Specifications / Requirementsss:

Intel® Core™ Ultra 7 265U (up to 5.30 GHz) or equivalent, or higher Minimum 12 cores / 14 threads Integrated graphics 32 GB DDR5-5600 RAM, (2 × 16 GB) expandable 1 TB M.2 PCIe NVMe SSD, Gen 4 or later 15.6-inch, WUXGA (1920 × 1200) or higher, IPS, anti-glare, minimum 300 nits, 60 Hz Wi-Fi 6E or Wi-Fi 7; Bluetooth 5.3 or higher FHD 1080p webcam; IR optional 2 X USB-A (3.2 Gen 1) 2 X USB-C (Thunderbolt™ 4) HDMI 2.0 up to 4K/60 Hz RJ-45 Ethernet port 3.5 mm headphone/microphone combo jack Minimum 5 hours normal office use Original 65 W USB-C Power Delivery adapter Backlit, spill-resistant Windows 11 Pro 64-bit Branded Professional Backpack/carrying case USB-C Multifunction Adaptor (branded) Minimum 1-year local warranty

Item: BRANDED LAPTOP

UNSPSC: Notebook computer

Specifications / Requirementsss:

Intel® Core™ Ultra 5 225U (up to 4.80 GHz) or equivalent, or higher Minimum 12 cores / 14 threads Integrated graphics 16 GB DDR5-5600 RAM, (1 × 16 GB) expandable 512 GB M.2 PCIe NVMe SSD, Gen 4 or later 15.6-inch, WUXGA (1920 × 1200) or higher, IPS, anti-glare, minimum 300 nits, 60 Hz Wi-Fi 6E or Wi-Fi 7; Bluetooth 5.3 or higher FHD 1080p webcam; IR optional 2 X USB-A (3.2 Gen 1) 2 X USB-C (Thunderbolt™ 4) HDMI 2.0 up to 4K/60 Hz RJ-45 Ethernet port 3.5 mm headphone/microphone combo jack Minimum 5 hours’ normal office use Original 65 W USB-C Power Delivery adapter Backlit, spill-resistant Windows 11 Pro 64-bit Branded Professional Backpack/carrying case USB-C Multifunction Adaptor (branded) Minimum 1-year local warranty

Item: BRANDED DESKTOP COMPUTER

UNSPSC: Notebook computer

Specifications / Requirementsss:

Tower Intel Core Ultra 5 235 up to 5.0 GHz or equivalent Minimum 14 cores / 14 threads, Processor cache 24 MB Intel® UHD Graphics, supporting minimum 2 displays Minimum 2 DIMM slots 16 GB DDR5-5600 RAM, (1 × 16 GB) 512 GB M.2 PCIe NVMe SSD, Gen 4 or later Wi-Fi 6E or Wi-Fi 7; Bluetooth 5.3 or higher RJ-45 Ethernet port 10/100/1000 Mbps Integrated OEM wireless module supporting Wi-Fi 6E and Bluetooth 5.3 or higher Integrated audio (headphone and microphone combo) Two USB 2.0 (480 Mbps) ports One USB 3.2 Gen 1 (5 Gbps) Type-C port Three USB 3.2 Gen 1 (5 Gbps) ports Two USB 2.0 (480 Mbps) with SmartPower on ports 1x HDMI 2.1 port and 1x DisplayPort Reads from and writes to CDs and DVDs 180 W PSU, Energy-Efficient Power Supply Branded Full size USB keyboard spill-resistant Branded Laser mouse, minimum 3 buttons with scroll wheel Windows 11 Pro 64-bit Full HD 1920 x 1080 @ 75 Hz, IPS/ VA, VGA, HDMI, and DisplayPort Minimum 1-year local warranty

Item: BRANDED DESKTOP COMPUTER

UNSPSC: Notebook computer

Specifications / Requirementsss:

Tower Intel Core Ultra 7 265 up to 5.3 GHz or equivalent Minimum 20 cores / 20 threads, Processor cache 30 MB Intel® UHD Graphics, supporting minimum 2 displays Minimum 2 DIMM slots 32 GB DDR5-5600 RAM, (2 × 16 GB) 1 TB M.2 PCIe NVMe SSD, Gen 4 or later Wi-Fi 6E or Wi-Fi 7; Bluetooth 5.3 or higher RJ-45 Ethernet port 10/100/1000 Mbps Integrated OEM wireless module supporting Wi-Fi 6E and Bluetooth 5.3 or higher Integrated audio (headphone and microphone combo) Two USB 2.0 (480 Mbps) ports One USB 3.2 Gen 1 (5 Gbps) Type-C port Three USB 3.2 Gen 1 (5 Gbps) ports Two USB 2.0 (480 Mbps) with SmartPower on ports 1x HDMI 2.1 port and 1x DisplayPort Reads from and writes to CDs and DVDs 180 W PSU, Energy-Efficient Power Supply Branded Full size USB keyboard spill-resistant Branded Laser mouse, minimum 3 buttons with scroll wheel Windows 11 Pro 64-bit Full HD 1920 x 1080 @ 75 Hz, IPS/ VA, VGA, HDMI, and DisplayPort Minimum 1-year local warranty

Item: BRANDED DESKTOP COMPUTER

UNSPSC: Notebook computer

Specifications / Requirementsss:

Core i5, 10th Generation 16 GB DDR4 RAM 500 GB SSD (Solid State Drive) 21" LED/LCD Monitor (1920x1080 or higher) Standard USB Keyboard (wired) Standard USB Optical Mouse (wired) Minimum 4 USB Ports, HDMI/VGA, Audio In/Out Free DOS or equivalent (Windows if required) 1 Year local warranty

Item: BRANDED SCANNER

UNSPSC: Scanners

Specifications / Requirementsss:

Sheetfed "Scan to PC Scan to text, PDF and more with built in OCR" 600 x 600 dpi 24-bit (external), 48-bit (internal) Yes 256MB or higher Standard, 50 sheets ADF capacity or above Simplex 40PPM, duplex 80ipm scan speed or above Two scan modes (simplex/duplex) 216 x 3100 mm 2 x 2 in USB 3.0 connectivity Power cord; power adapter; USB cable One-year or above For text & images: PDF, PDF/A, Encrypted PDF, JPEG, PNG, BMP, TIFF, Word, Excel, PowerPoint, Text (.txt), Rich Text (.rtf) and Searchable PDF

Item: PRINTER (BLACK)

UNSPSC: Laser printers

Specifications / Requirementsss:

Printer only (Black) Up to 40 ppm or higher Up to 80,000 pages or higher Up to 1,200 x 1,200 dpi 300 dpi, 600 dpi Laser 800 MHz or higher 1 (black) UBS/Ethernet Yes Yes 256 MB or higher Automatic 3 x 5 to 8.5 x 14 in ENERGY STAR® certified One-year or above Power Cables, USB cable

Item: Toner for the Same Printer

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer only (Black) Up to 40 ppm or higher Up to 80,000 pages or higher Up to 1,200 x 1,200 dpi 300 dpi, 600 dpi Laser 800 MHz or higher 1 (black) UBS/Ethernet Yes Yes 256 MB or higher Automatic 3 x 5 to 8.5 x 14 in ENERGY STAR® certified One-year or above Power Cables, USB cable Toner for the Same printer above mentioned specification (China or Equivalent)

Item: COLOR PRINTER

UNSPSC: Multi function printers

Specifications / Requirementsss:

Printer only (Color Printer) Up to 35 ppm or higher Up to 80,000 pages or higher 600 x 600 dpi 600 x 600 dpi Laser 800 MHz or higher 4 (1 each black, cyan, magenta, yellow) UBS/Ethernet Yes Yes 512 MB or higher Automatic 3 x 5 to 8.5 x 14 in ENERGY STAR® certified One-year or above Quote Price Power Cables, USB cable

Item: Toner for the Same Printer

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Printer only (Color Printer) Up to 35 ppm or higher Up to 80,000 pages or higher 600 x 600 dpi 600 x 600 dpi Laser 800 MHz or higher 4 (1 each black, cyan, magenta, yellow) UBS/Ethernet Yes Yes 512 MB or higher Automatic 3 x 5 to 8.5 x 14 in ENERGY STAR® certified One-year or above Quote Price Power Cables, USB cable Toner for the Same printer above mentioned specification (China or Equivalent)

Item: PRINTER ALL IN ONE 30PPM

UNSPSC: Multi function printers

Specifications / Requirementsss:

Print, copy, scan, fax Up to 30 ppm or higher Up to 30,000 pages or higher Up to 1,200 x 1,200 dpi 300 dpi, FastRes 1200, ProRes1200 Laser 1 (black) 1 Hi-Speed USB 2.0; 1 rear host USB; 1 Front USB port; Gigabit Ethernet 10/100/1000BASE-T network; 802.3az(EEE); 802.11b/g/n/2.4/5 GHZ Wi-Fi radio Dual-band Wi-Fi Yes 256 MB or higher Automatic 3 x 5 to 8.5 x 14 in ENERGY STAR® certified One-year or above Power Cables, USB cable

Item: Toner for the Same Printer

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Print, copy, scan, fax Up to 30 ppm or higher Up to 30,000 pages or higher Up to 1,200 x 1,200 dpi 300 dpi, FastRes 1200, ProRes1200 Laser 1 (black) 1 Hi-Speed USB 2.0; 1 rear host USB; 1 Front USB port; Gigabit Ethernet 10/100/1000BASE-T network; 802.3az(EEE); 802.11b/g/n/2.4/5 GHZ Wi-Fi radio Dual-band Wi-Fi Yes 256 MB or higher Automatic 3 x 5 to 8.5 x 14 in ENERGY STAR® certified One-year or above Power Cables, USB cable Tone for the same printer China or Equivalent

Item: Toner for the Same Printer

UNSPSC: Printer or facsimile toner

Specifications / Requirementsss:

Print, copy, scan, fax Up to 30 ppm or higher Up to 30,000 pages or higher Up to 1,200 x 1,200 dpi 300 dpi, FastRes 1200, ProRes1200 Laser 1 (black) 1 Hi-Speed USB 2.0; 1 rear host USB; 1 Front USB port; Gigabit Ethernet 10/100/1000BASE-T network; 802.3az(EEE); 802.11b/g/n/2.4/5 GHZ Wi-Fi radio Dual-band Wi-Fi Yes 256 MB or higher Automatic 3 x 5 to 8.5 x 14 in ENERGY STAR® certified One-year or above Power Cables, USB cable Toner for the Same Printer For original toner (GD’s and CPR) will be required at the time of supply.

Item: PRINTER ALL IN ONE 40PPM

UNSPSC: Laser printers

Specifications / Requirementsss:

Print, copy, scan, fax Up to 40 ppm or higher Up to 80,000 pages or higher Up to 1,200 x 1,200 dpi 300 dpi, 600 dpi, FastRes 1200, ProRes1200 Laser 1 (black) 1 Hi-Speed USB 2.0; 1 rear host USB; 1 Front USB port; Gigabit Ethernet 10/100/1000BASE-T network; 802.3az(EEE); 802.11b/g/n/2.4/5 GHZ Wi-Fi Dual-band Wi-Fi Yes 512 MB or higher Automatic 3 x 5 to 8.5 x 14 in ENERGY STAR® certified One-year or above Power Cables, USB cable

Item: MULTIMEDIA PROJECTOR WITH SCREEN (Laser)

UNSPSC: Multimedia projectors

Specifications / Requirementsss:

3500 or higher 1,400:1 or higher 1280x800 or higher 1600x1200 or higher 720p, 1080i.1080, 576i, 576p or higher Up to 20,000 hours higher 1.2:1 or higher 4.2H x 15.8W x 12.7D or higher 3 years Parts and Labor on projector and 3 years or 6000 hours on lamp

Item: MULTIMEDIA PROJECTOR WITH SCREEN (Lamp)

UNSPSC: Multimedia projectors

Specifications / Requirementsss:

LCD/DLP 3300 ANSI or higher 3LCD or higher 15000 hours or higher 16000:1 or higher Yes Motorized (Size 8’ x 6) Complete installation with Mount kit, HDMI cable, power cable & ducting 1 Year or higher

Item: LCD-19"

UNSPSC: Televisions

Specifications / Requirementsss:

Dell/HP/Philips (or equivalent)

Item: LCD-22"

UNSPSC: Televisions

Specifications / Requirementsss:

Dell/HP/Philips (or equivalent) Full HD 1920 x 1080 @ 60 Hz, IPS/ VA, VGA, HDMI

Item: LCD-24"

UNSPSC: Televisions

Specifications / Requirementsss:

Dell/HP/Philips (or equivalent) Full HD 1920 x 1080 @ 75 Hz, IPS/ VA, VGA, HDMI, and DisplayPort

Item: LCD-27"

UNSPSC: Televisions

Specifications / Requirementsss:

Dell/HP/Philips (or equivalent) QHD 2560 x 1440 @ 75 Hz, IPS/VA, VGA, HDMI, and DisplayPort

Item: Chromebook (Brand New)

UNSPSC: Notebook computer

Specifications / Requirementsss:

Processor Intel Core i3 or Intel N100 RAM 8GB Storage 128GB SSD/eMMC Screen 14-inch Full HD Resolution 1920 × 1080 Operating system ChromeOS Battery 8–12 hours Wi-Fi Wi-Fi 6 Bluetooth 5.0 or newer Camera HD 720p or 1080p Condition Brand new, sealed Warranty Official warranty

Item: Chromebook (Refurbish)

UNSPSC: Notebook computer

Specifications / Requirementsss:

Brand HP, Dell, Lenovo, Acer Processor Intel Celeron N4020 or better RAM 4GB minimum, 8GB preferred Storage 32GB minimum, 64GB preferred Display 11.6–14 inches Battery At least 4–5 hours Touchscreen Optional ChromeOS updates Preferably supported until 2029 or later Warranty3–6 months preferred

Price Schedule

For Individual Items

# Item Title Quantity Unit Price (PKR) Total Price (PKR) Delivery Location Delivery Period / Year Country of Origin
1
2
For Lots
# Lot Title Total Lot Price (PKR) Country of Origin
1 [Lot 1 Title]

📑 General Conditions of Contract (GCC)

Annual Tender FY 2026-27 (Stationary & IT)

Published on: Friday, November 20, 2026 11:45 AM

Ref# : P197793
QR Code

A. General

1. Definitions

1.1 Unless the context otherwise requires, the following terms whenever used in this Contract shall have the same meaning and shall be interpreted as indicated
  1. “Applicable Law” means the laws and any other instruments having the force of law in the Government’s Country, or in such other country as may be specified in the Special Conditions of the Contract (SC), as they may be issued and in force from time to time;
  2. The “Arbitrator” is the person appointed with mutual consent of both the parties, to resolve contractual disputes as provided for in the General Conditions of the Contract GCC Clause 35 hereunder.
  3. “Authority” means Public Procurement Regulatory Authority.
  4. The “Commencement Date” is the date when the Supplier shall commence execution of the contract as specified in the SCC.
  5. “Completion date” means the date of completion of the Contract by the Bidder as certified by the Procuring Agency.
  6. “Procuring Agency” means:-
    1. any Ministry, Division, Department or any Office of the Government;
    2. any authority, corporation, body or organization established by or under a Law or which is owned or controlled by the Government;.
  7. “The Contract” means an agreement enforceable by law;
  8. “The Contract Price” means the price payable to the Bidder under the Contract for the full and proper performance of its contractual obligations;
  9. “Ancillary Services” means those services ancillary to the provision  of Goods, such as transportation and insurance, and any other incidental services, such as installation, commissioning, provision of technical assistance, training, and other such obligations of the Bidder covered under the  Contract;
  10. “GCC” means the General Conditions of Contract contained in this section;
  11. “SCC” means the Special Conditions of Contract by which the GCC may be amended or supplemented;
  12. “Day” means calendar day unless indicated otherwise.
  13. “Defective Goods” are those goods which are below standards, requirements or specifications stated by the Contract.
  14. “Delivery” means the transfer of the goods from the supplier equipment, machinery, and /or other materials which the Supplier is required to supply to the Procuring Agency under Contract.
  15. “Effective Date” means the date on which this Contract comes into force and effect.
  16. “Force Majeure” means an unforeseeable event which is beyond reasonable control of either Party and which makes a Party’s performance of its obligations under the Contract impossible or so impractical as to be considered     impossible under the circumstances. 

    For the purposes of this Contract, “Force Majeure” means an event which is beyond the reasonable control of a Party, is not foreseeable, is unavoidable, and its origin is not due to negligence or lack of care on the part of a Party, and which makes a Party’s performance of its obligations hereunder impossible or so impractical as reasonably to be considered impossible in the circumstances. and includes, but is not limited to, war, riots, civil disorder, earthquake, fire, explosion, storm, flood, epidemics, or other adverse weather conditions, strikes, lockouts or other industrial action (except where such strikes, lockouts or other industrial action are within the power of the Party invoking Force Majeure to prevent), confiscation or any other action by Government agencies.

  17. The Bidder” means the individual or corporate body whose Bids to provide the Goods has been accepted by the Procuring Agency;
  18. “The Project Site,” where applicable, means the place or places named in Bids Data Sheet and technical Specifications;
  19. “Government” means the Government of Pakistan;
  20. “Subcontractor” means any entity to which the Bidder subcontracts any part of the Goods.
  21.  The “Services” means the work to be performed by the Bidder pursuant to this Contract and as prescribed in the Specifications and Schedule of Activities included in the Bidder’s Bids;
  22. “Party” means the Procuring Agency or the Bidder, as the case may be, and “Parties” means both of them;
  23. “Foreign Currency” means any currency other than the currency of the country of the Procuring Agency;
  24. “Completion Date” means the date of completion of the contract by the Bidder as certified by the Procuring Agency;
  25.  “In Writing” means communicated in written form with proof of receipt;
  26. “Local Currency” means the currency of Pakistan;
  27. “Origin” means the place where the Goods were mined, grown, or produced or from which the Services are supplied. Goods are produced when, through manufacturing, processing, or substantial and major assembly of components, a commercially recognized new produce results that is substantially different in basic characteristics or in purpose or utility from its components.
  28. “Specification” means the Specification of the Goods and performance of incidental services in accordance with the relevant standards included in the Contract and any modification or addition made or approved by the Procuring Agency.
  29. “Procuring Agency” means: -
    any Ministry, Division, Department or any Office of the Federal Government;
    any authority, corporation, body or organization established by or under a Federal Law or which is owned or controlled by the Federal Government;

2. Application and Interpretation

2.1 These General Conditions shall apply to the extent that they are not superseded by provisions of other parts of the Contract.

2.2 In interpreting these Conditions of Contract headings and marginal notes are used for convenience only and shall not affect  their interpretations unless specifically stated; references to singular include the plural and vice versa; and masculine include the feminine. Words have their ordinary meaning  under the   language of the Contract unless specifically defined.

3. Applicable Law

3.1 The contract shall be governed and interpreted in accordance with the laws of Pakistan, unless otherwise specified in SCC.

4. Governing Language

4.1 The Contract as well as all correspondence and documents relating to the Contract exchanged between the Bidder and the Procuring Agency, shall be written in the English language unless otherwise stated in the SCC.  Supporting documents and printed literature that are part of the Contract may be in another language provided these are accompanied by an accurate translation of the relevant passages in English, in which case, for purposes of interpretation of the Contract, this translation shall govern.

5. Notices

5.1 Any notice, request, or consent made pursuant to this Contract shall be in writing and shall be deemed to have been made when delivered in person to an authorized representative of the Party to whom the communication is addressed, or when sent by registered mail, telex, telegram, or facsimile to such Party at the address specified in the SCC.

6. Standard

6.1 The Goods supplied under this Contract shall conform to the standards mentioned in the Technical Specifications, and, when no applicable standard is mentioned, the American Standards (such as ACI, IEEE, ASME, etc.) or the Pakistani standards such as PSQCA Such standards shall be the latest issued by the concerned institution.

7. Delivery/Location

7.1 The Goods shall be delivered to such locations as the Procuring Agency may approve and as specified in SCC.

8. Authorized Representatives / Authority of Member in charge

8.1 Any action required or permitted to be taken, and any document required or permitted to be executed, under this Contract by the Procuring Agency or the Bidder may be taken or executed by the officials specified in the SCC.

B. Commencement, Completion, Modification, and Termination of Contract

8. Effectiveness of Contract

8.1 This Contract shall come into effect on the date the Contract is signed by both parties and such other later date as may be stated in the SCC.

9. Commencement of the Contract

9.1 The Bidder shall confirm availability of Key Experts and begin carrying out the Services not later than the number of days after the Effective Date specified in the SCC.

10. Program

10.1 Before commencement of the Contract, the Bidder shall submit to the Procuring Agency for approval a Program showing the general methods, arrangements, order and timing for all activities. The Services shall be carried out in accordance with the approved Program as updated.

11. Starting Date/Expiration Date

11.1 The Bidder shall start carrying out the Services Five (05) days after the date the Contract becomes effective, or at such other date as may be specified in the SCC.

11.2 Unless terminated earlier pursuant to Clause GCC 16 hereof, this Contract shall expire at the end of such time period after the Effective Date as specified in the SCC.

12. Entire Agreement

12.1 This Contract contains all covenants, stipulations and provisions agreed by the Parties.  No agent or representative of either Party has authority to make, and the Parties shall not be bound by or be liable for, any statement, representation, promise or agreement not set forth herein.

13. Modification

13.1 Any modification or variation of the terms and conditions of this Contract, including any modification or variation of the scope, may only be made by written agreement between the Parties. However, each Party shall give due consideration to any Bids for modification or variation made by the other Party.

13.2 In cases of any modifications or variations, the prior written consent of the Procuring Agency is required.

14. Force Majeure

14.1 Definition

For the purposes of this Contract, “Force Majeure” means an event which is beyond the reasonable control of a Party and which makes a Party’s performance of its obligations under the Contract impossible or so impractical as to be considered impossible under the circumstances.

14.2 No Breach of Contract

The failure of a Party to fulfill any of its obligations under the contract shall not be considered to be a breach of, or default under, this Contract in so far as such inability arises from an event of Force Majeure, provided that the Party affected by such an event (a) has taken all reasonable precautions, due care and reasonable alternative measures in order to carry out the terms and conditions of this Contract, and (b) has informed the other Party as soon as possible about the occurrence of such an event.

14.3 Extension of Time

Any period within which a Party shall, pursuant to this Contract, complete any action or task, shall be extended for a period equal to the time during which such Party was unable to perform such action as a result of Force Majeure. However, such period shall not exceed sixty (60) days.

14.4 Payments

During the period of their inability to perform the Services as a result of an event of Force Majeure, the Bidder shall be entitled to continue to be paid under the terms of this Contract, as well as to be reimbursed for additional costs reasonably and necessarily incurred by them during such period for the purposes of the Services and in reactivating the Service after the end of such period.

15. Termination

15.1 By the Procuring Agency

The Procuring Agency may terminate this Contract in case of the occurrence of any of the events specified in paragraphs (a) through (e) of this Clause. In such an occurrence the Procuring Agency shall give at least thirty (30) calendar days’ written notice of termination to the Bidder in case of the events referred to in (a) through (d); at least sixty (60) calendar days’ written notice in case of the event referred to in (e);

  1. If the Bidder fails to remedy a failure in the performance of its obligations hereunder, as specified in a notice of suspension;
  2. If the Bidder becomes (or, if the Bidder consists of more than one entity, if any of its members becomes) insolvent or bankrupt or enter into any agreements with their creditors for relief of debt or take advantage of any law for the benefit of debtors or go into liquidation or receivership whether compulsory or voluntary;
  3. If the Bidder fails to comply with any final decision reached as a result of arbitration proceedings;
  4. If, as the result of Force Majeure, the Bidder is unable to perform a material portion of the Services for a period of not less than sixty (60) calendar days;
  5. If the Procuring Agency, in its sole discretion and for any reason whatsoever, decides to terminate this Contract;

15.2 By the Bidder

The Bidder may terminate this Contract, by not less than thirty (30) calendar days’ written notice to the Procuring Agency, in case of the occurrence of any of the events specified in paragraphs (a) through (d) of this Clause.

  1. If the Procuring Agency fails to pay any money due to the Bidder pursuant to this Contract and not subject to dispute within forty-five (45) calendar days after receiving written notice from the Bidder  that such payment is overdue.
  2. If, as the result of Force Majeure, the Bidder is unable to perform a material portion of the Services for a period of not less than sixty (60) calendar days.
  3. If the Procuring Agency fails to comply with any final decision reached as a result of arbitration.
  4. If the Procuring Agency is in material breach of its obligations pursuant to this Contract and has not remedied the same within forty-five (45) days (or such longer period as the Bidder may have subsequently approved in writing) following the receipt by the Procuring Agency of the Bidder’s notice specifying such breach.

C.  Obligations of the Bidder

16. General

16.1 Standard of Performance

  1. The Bidder shall deliver the product and carry out the Services with all due diligence, efficiency and economy, in accordance with generally accepted professional standards and practices, and shall observe sound management practices, and employ appropriate technology and safe and effective equipment, machinery, materials and methods. The Bidder shall always act, in respect of any matter relating to this Contract or to the Services, as a faithful adviser to the Procuring Agency, and shall at all times support and safeguard the Procuring Agency’s legitimate interests in any dealings with the third parties.

16.2 Law Applicable to Goods

The Bidder shall deliver the goods in accordance with the Contract and in accordance with the Law of Pakistan and shall take all practicable steps to ensure that any of its Experts and Sub-Bidders, comply with the Applicable Law. 

17. Conflict of Interests

17.1 Bidder Not to Benefit from Commissions and Discounts.

The remuneration of the Bidder shall constitute the Bidder’s sole remuneration in connection with this Contract or the Services, and the Bidder shall not accept for their own benefit any trade commission, discount, or similar payment in connection with activities pursuant to this Contract or to the Services or in the discharge of their obligations under the Contract, and the Bidder shall use their best efforts to ensure that the Personnel, any Subcontractors, and agents of either of them similarly shall not receive any such additional remuneration.

17.2  Bidder and Affiliates Not to be Otherwise Interested in Project

The Bidder agree that, during the term of this Contract and after its termination, the Bidder and its affiliates, as well as any Subcontractor and any of its affiliates, shall be disqualified from providing Goods for any project resulting from or closely related to the Services.

17.3  Prohibition of Conflicting Activities

Neither the Bidder nor its Subcontractors nor the Personnel shall engage, either directly or indirectly, in any of the following activities:

  1. during the term of this Contract, any business or professional activities in the Government’s country which would conflict with the activities assigned to them under this Contract;
  2. during the term of this Contract, neither the Bidder nor their Subcontractors shall hire public employees in active duty or on any type of leave, to perform any activity under this Contract;

18. Confidentiality

18.1 Except with the prior written consent of the Procuring Agency, the Bidder and the Experts shall not at any time communicate to any person or entity any confidential information acquired in the course of the contract.

19. Insurance to be Taken Out by the Bidder

19.1 The Bidder(a) shall take out and maintain, and shall cause any Subcontractors to take out and maintain, at its (or the Subcontractors’, as the case may be) own cost but on terms and conditions approved by the Procuring Agency, insurance against the risks, loss or damage, and for the coverage, as shall be specified in the SCC; and (b) at the Procuring Agency’s request, shall provide evidence to the Procuring Agency showing that such insurance has been taken out and maintained and that the current premiums have been paid.

20. Bidder’s Actions Requiring Procuring Agency’s Prior Approval

20.1 The Bidder shall obtain the Procuring Agency’s prior approval in writing before taking any of the following actions:

(a)    appointing such members of the Personnel not provided by the Bidder;

(b)    changing the Program of activities; and

(c)     any other action that may be specified in the SCC.

21. Reporting Obligations

21.1 The Bidder shall submit to the Procuring Agency the reports and documents in the numbers, and within the periods as prescribed by the Procuring Agency.

22. Liquidated Damages

22.1  If the Supplier fails to deliver any or all of the Goods or to perform the Services within the period(s) specified in the Contract, the Procuring Agency shall, without prejudice to its other remedies under the Contract, deduct from the Contract Price, as liquidated damages, a sum equivalent to the percentage specified in SCC of the delivered price of the delayed Goods or unperformed Services for each week or part thereof of delay until actual delivery or performance, up to a maximum deduction of the performance security (or guarantee) specified in SCC. Once the said maximum is reached, the Procuring Agency may consider termination of the Contract pursuant to GCC Clause 16.

22.2  Correction for Over-payment

If the Intended Completion Date is extended after liquidated damages have been paid, the Procuring Agency shall correct any overpayment of liquidated damages by the Bidder by adjusting the next payment certificate.  The Bidder shall be paid interest on the overpayment, calculated from the date of payment to the date of repayment, at the rates specified in SCC.

22.3  Lack of performance penalty

If the Bidder has not corrected a Defect within the time specified in the Procuring Agency’s notice, a penalty for Lack of performance will be paid by the Bidder. The amount to be paid will be calculated as a percentage of the cost of having the Defect corrected, assessed as specified in the SCC.

23. Performance Guarantee

23.1 The Performance Security (or Guarantee) shall be provided to the Procuring Agency no later than the date specified in the Letter of Acceptance and shall be issued in an amount and form acceptable to the Procuring Agency as specified in SCC, and   denominated in the types and proportions of the currencies in which the Contract Price is payable as specified in the SCC.

23.2 Within Seven (07) days from the issuance of acceptance letter from the Procuring Agency, the successful Bidder shall furnish the Performance Guarantee in shape of ------- at the discretion of the PA in the amount specified in SCC. In case the amount of   Bids security is equal or greater than

23.3 The proceeds of the Performance Guarantee shall be payable to the Procuring agency as compensation for any loss resulting from the Supplier’s failure to complete its obligations under the Contract.

23.4 The Performance Guarantee shall be denominated in the currency of the Contract, or in a freely convertible currency acceptable to the Procuring agency and shall be in the acceptable form as specified in SCC.

23.5 The Performance Guarantee will be discharged by the Procuring agency and returned to the Supplier not later than thirty (30) days following the date of completion of the Supplier’s performance obligations under the Contract, including any warranty obligations, unless otherwise specified in SCC.

23.6 The bid security of the successful bidder shall not be substituted with the Performance Guarantee.

24. Fraud and Corruption

24.1 The Procuring Agency requires the Supplier to disclose any commissions or fees that may have been paid or are to be paid to agents or any other party with respect to the Bidding process or execution of the Contract. The information disclosed must include at least the name and address of the agent or other party, the amount and currency, and the purpose of the commission, gratuity or fee.

25. Sustainable Procurement

25.1 The Bidder shall conform to the sustainable procurement contractual provisions, if and as specified in the SCC.

D. Bidder’s Personnel

26. Description of Personnel

26.1 The titles, agreed job descriptions, minimum qualifications, and estimated periods of engagement in the carrying out of the Services of the Bidder’s Key Personnel.  The Key Personnel listed by title as well as by name are hereby approved by the Procuring Agency.

27. Removal and/or Replacement of Personnel

27.1 Except as the Procuring Agency may otherwise agree, no changes shall be made in the Key Personnel.  If, for any reason beyond the reasonable control of the Bidder, it becomes necessary to replace any of the Key Personnel, the Bidder shall provide as a replacement a person of equivalent or better qualifications.

27.2 If the Procuring Agency finds that any of the Personnel have (i) committed serious misconduct or have been charged with having committed a criminal action, or (ii) have reasonable cause to be dissatisfied with the performance of any of the Personnel, then the Bidder shall, at the Procuring Agency’s written request specifying the grounds thereof, provide as a replacement a person with qualifications and experience acceptable to the Procuring Agency.

27.3 The Bidder shall have no claim for additional costs arising out of or incidental to any removal and/or replacement of Personnel.

E.  Obligations of the Procuring Agency

28. Assistance and Exemptions

28.1 The Procuring Agency shall use its best efforts to ensure that the Government shall provide the Bidder such assistance and exemptions as specified in the SCC.

29. Change in the Applicable Law

29.1 If, after the date of this Contract, there is any change in the Applicable Law with respect to taxes and duties which increases or decreases the cost of the related Services rendered by the Bidder, then the remuneration and reimbursable expenses otherwise payable to the Bidder under this Contract shall be increased or decreased accordingly by agreement between the Parties, and corresponding adjustments shall be made to the amounts referred in the SCC.

30. Services and Facilities

30.1 The Procuring Agency shall make available to the Bidder and the Experts, for the purposes of the Services and free of any charge, the services, facilities and property described , at the times and in the manner specified in the SCC or terms of reference.

30.2 In case that such services, facilities and property shall not be made available to the Bidder, the Parties shall agree on (i) any time extension that it may be appropriate to grant to the Bidder for the performance of the Services, (ii) the manner in which the Bidder shall procure any such services, facilities and property from other sources, and (iii) the additional payments, if any, to be made to the Bidder as a result thereof.

F. Payments to the Bidder

31. Contract Price

31.1 The price payable shall be in Pakistani Rupees unless otherwise specified in the SCC. Prices charged by the Supplier for Goods delivered under the Contract shall not vary from the prices quoted by the Supplier in its Bid.

32. Terms and Conditions of Payment

32.1 Payments will be made to the Bidder according to the payment schedule stated in the SCC and as per actual invoice submitted by the Bidder.

32.2 Unless otherwise stated in the SCC, the advance payment shall be made against the provision by the Bidder of a bank guarantee for the same amount, and shall be valid for the period stated in the SCC.  Any other payment shall be made after the conditions listed in the SCC for such payment have been met, and the Bidder have submitted an invoice to the Procuring Agency specifying the amount due.

33. Currency of Payment

33.1 Any payment under this Contract shall be made in the currency(ies) specified in the SCC.

G. Quality Control

34. Identifying Defects

34.1 The principle and modalities of Inspection of the Goods by the Procuring Agency shall be as indicated in the SCC. The Procuring Agency shall check the Bidder’s performance and notify him of any Defects that are found.  Such checking shall not affect the Bidder’s responsibilities.  The Procuring Agency may instruct the Bidder to search for a Defect and to uncover and test any service that the Procuring Agency considers may have a Defect. Defect Liability Period is as defined in the SCC.

35. Correction of Defects, and

Lack of Performance Penalty

35.1 The Procuring Agency shall give notice to the Bidder of any Defects before the end of the Contract.  The Defects liability period shall be extended for as long as Defects remain to be corrected.

35.2 Every time notice a Defect is given, the Bidder shall correct the notified Defect within the length of time specified by the Procuring Agency’s notice.

35.3 If the Bidder has not corrected a Defect within the time specified in the Procuring Agency’s notice, the Procuring Agency will assess the cost of having the Defect corrected, the Bidder will pay this amount, and a Penalty for Lack of Performance.

36. Taxes and Duties

36.1 A Supplier shall be entirely responsible for all taxes, duties, fees, etc., incurred until delivery of the contracted Goods to the Procuring Agency.

H. Settlement of Disputes

37. Alternate Dispute Resolution

37.1 Upon the commencement of the Procurement Contract, any disputes arising between the contracting parties shall be resolved in accordance with Rule 66 of the Public Procurement Rules, 2026.

37.2 The procuring agency may refer the matter to the Chief Justice Islamabad High Court or Managing Director PPRA or the Secretary Ministry of Law & Justice for appointment of Arbitrator.

37.3 The fee for the Arbitrator shall be specified in Pak Rupees as determined by the appointing authority which shall be borne and shared equally by the contracting parties.

38. Change Orders

The Procuring Agency may at any time, by a written order given to the Supplier, make changes within the general scope of the Contract in any one or more of the following:

a)Drawings, designs, or specifications, where Goods to be furnished under the Contract are to be specifically manufactured for the Procuring Agency;
b)The method of shipment or packing;
c)The place of delivery; and/or
d)The Services to be provided by the Supplier.

39. Contract Amendenments

39.1 Subject to GCC Clause 32, no variation in or modification of the terms of the Contract shall be made except by written amendment signed by the parties.

40. Sub-Contracts

40.1 The Supplier shall consult the Procuring Agency in the event of subcontracting under this contract if not already specified in the Bid.  Subcontracting shall not alter the Supplier’s obligations.

📑 Special Conditions of Contract (SCC)

Annual Tender FY 2026-27 (Stationary & IT)

Published on: Friday, November 20, 2026 11:45 AM

Ref# : P197793
QR Code

SECTION VIII. SPECIAL CONDITIONS OF CONTRACT

The following Special Conditions of Contract shall supplement the General Conditions of Contract. Whenever there is a conflict, the provisions herein shall prevail over those in the Conditions of Contract. The corresponding clause number of the GCC is indicated in parentheses.

Number of GC Clause

Amendments of, and Supplements to, Clauses in the General Conditions of Contract

Number of GC Clause 1

Definitions

The Procuring Agency is: Shaheed Zulfiqar Ali Bhutto Medical, University, Islamabad (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad), Purchase Officer Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory

The Supplier is:

The title of the subject procurement is: Annual Tender FY 2026-27 (Stationary & IT)

Number of GC Clause 3

Applicable/Governing Law:

The Contract shall be interpreted in accordance with the laws of Islamic Republic of Pakistan

Number of GC Clause 4

Language:

The language of the Contract, all correspondence and communications to be given, and all other documentation to be prepared and supplied under the Contract shall be in English.

Number of GC Clause 5

Notices:

The addresses for the notices are:

The Authority: 

Shaheed Zulfiqar Ali Bhutto Medical, University, Islamabad (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad), Purchase Officer
Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory
+92-333-539-2247
purchaseofficer@szabmu.edu.pk

Contractor/ Bidder: 

 [Name, address and telephone number].

The Contractor/ Bidder’s Representative(s)

[Name, address, telephone number and e-mail address]

Number of GC Clause 7.1

The Authorized Representatives are:

For the Procuring Agency:

Shaheed Zulfiqar Ali Bhutto Medical, University, Islamabad (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad), Purchase Officer
Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory
+92-333-539-2247
purchaseofficer@szabmu.edu.pk

For the Bidder:

Name: ………………………

Designation: ……………..

Address: ……………………………..

Number of GC Clause 8

Effectiveness of the contract

Number of GC Clause 9

Commencement of Contract:

Number of GC Clause 11.2

Expiration of Contract:

Number of GC Clause 15

Termination

In the event of termination of the contract due to any reason as already defined in the General Conditions of Contract, the Bidder shall be responsible for providing to the Authority the Goods till the time of alternate arrangements.

Number of GC Clause 17

Conflict of Interest:

The Procuring Agency reserves the right to determine on a case-by-case basis whether the Bidder should be disqualified from providing goods or services due to a conflict of a nature described in Clause GCC 17.

Number of GC Clause 22

Liquidated Damages 

If the Bidder fails to provide services as required under the contract or in case of any data loss/data breach or any incident compromising the data security or other such failures related to any services, the Bidder shall pay to the Procuring Agency as Liquidated Damages at a rate of 1.00% to 10.00% of the Contract value, in accordance with the extent of performance failure & the cost of investigating such incidents as judged by the Authority.

Number of GC Clause 23

Performance Guarantee:


Instrument of Performance Guarantee shall be in the Name of : Nil

The amount of performance guarantee shall be 0% of the contract price in acceptable form of Nil

Number of GC Clause 32

Payment terms:

Payment will be made to the Bidder against the procured Goods and services according to the actual invoice or running bills submitted by the Bidder against the services provided within the time given in the conditions of the contract.

Number of GC Clause 33

Currency of Payment:

All the payment to be released to the contractor/Bidder shall be in Pakistani Rupees.

Number of GC Clause 34

Identifying Defects:

The Authority reserves the right at any time to inspect the premises of the provider to inspect the goods and monitor the goods being provided.

Inspections & Tests Requirements

For being Brand New, bearing relevant reference numbers of the equipment (Certificate from supplier)

For Physical Fitness having No Damages (Certificate from supplier)

For the Country of Origin as quoted by the Supplier (Certificate from manufacturer)

For conformance to specifications and performance parameters, through Prior to delivery inspection (Inspection Report by Procurement Committee / Inspection Team)

For successful operation at site after complete installation, testing and commissioning of the equipment (Installation, Testing and Commissioning Report by Procurement Committee / Inspection Team)

Delivery & Documents

Copies of the Supplier’s invoice showing Goods’ description, quantity, unit price, and total amount;

Original and two copies of the usual transport document (for example, a negotiable bill of lading, a non-negotiable sea waybill, an inland waterway document, an air waybill, a railway consignment note, a road consignment note, or a multimodal transport document) which the buyer may require to take the goods;

Copies of the packing list identifying contents of each package;

Insurance Certificate;

Manufacturer’s or Supplier’s Valid Warranty Certificate;

Inspection Certificate issued by the Nominated Inspection Agency (if any), and the Supplier’s Factory Inspection Report;

Certificate of Origin.

The above documents would be required even if the equipment has already been imported and is available with the supplier ex-stock

Number of GC Clause 37

Following is the guidance for Dispute Resolution

(a) For Contracts to be entered with foreign Contractor/ Service Provider:

All disputes arising in connection with the present Contract shall be finally settled under the Rules of Conciliation and Arbitration of the International Chamber of Commerce by one or more arbitrators appointed in accordance with said Rules.

(b) For Contracts to be entered with nationals of Pakistan:

i. If any dispute of any kind whatsoever shall arise between the Authority and the Bidder in connection with or arising out of the Contract, including without prejudice to the generality of foregoing, any question regarding its existence, validity, termination and the execution of the Contract – whether during developing phase or after their completion and whether before or after the termination, abandonment or breach of the Contract – the parties shall seek to resolve any such dispute or difference by mutual diligent negotiations in good faith within 14 (fourteen) days following a notice sent by one Party to the other Party in this regard. 

ii. At future of negotiation the dispute shall be resolved through mediation and mediator shall be appointed with the mutual consent of the both parties. 

iii. At the event of failure of mediation to resolve the dispute relating to this contract such dispute shall finally be resolved through binding Arbitration in accordance with GCC clause 38.

iv. The cost of the mediation and arbitration shall be shared by the parties in equal proportion however the both parties shall bear their own costs and lawyer’s fees regarding their own participation in the mediation and arbitration. However, the Arbitrator may make an award of costs upon the conclusion of the arbitration making any party to the dispute liable to pay the costs of another party to the dispute. 
v. Arbitration proceedings as mentioned in the above clause regarding resolution of disputes may be commenced prior to, during or after completion of the contract.

Notwithstanding any reference to the arbitration herein, the parties shall continue to perform their respective obligations under the Contract unless they otherwise agree that the Authority shall pay the Bidder any monies due to the Bidder.

Rules of procedure for arbitration proceedings: 

Any dispute between the Authority and a Bidder who is a national of the Islamic Republic of Pakistan arising in connection with the present Contract shall be referred to adjudication or arbitration in accordance with the laws of the Islamic Republic of Pakistan including Arbitration Act 1940, however above provision shall prevail in referring the case to the Arbitrator.

Place of Arbitration and Award:

The arbitration shall be conducted in English language and place of arbitration shall be at Islamabad. The award of the arbitrator shall be final and shall be binding on the parties.

📑 Bid Securing Declaration (BSD)

Annual Tender FY 2026-27 (Stationary & IT)

Published on: Friday, November 20, 2026 11:45 AM

Ref# : P197793
QR Code

Form 9: Bid Securing Declaration

Date: [insert date (as day, month and year)]

Bid No.:P197793

Alternative No.: [insert identification No if this is a Bid for an alternative]

To: Shaheed Zulfiqar Ali Bhutto Medical, University, Islamabad (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad), Purchase Officer Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory

 

We, the undersigned, declare that:

We understand that, according to your conditions, Bids must be supported by a Bid Securing Declaration.

We accept that we will be blacklisted and henceforth cross debarred  for participating in respective category of public procurement proceedings for a period of (not more than) six months, if fail to abide with a bid securing declaration, however without indulging in corrupt and fraudulent practices, if we are in breach of our obligation(s) under the Bid conditions, because we:

  1. have  withdrawn  or  modified  our  Bid  during  the  period  of  Bid  Validity specified in the Form of Bid;
  2. Disagreement to arithmetical correction made to the Bid price; or
  3. having been notified of the acceptance of our Bid by the Procuring Agency during the period of Bid Validity, (i) failure to sign the contract if required by Procuring Agency to do so or (ii) fail or refuse to furnish the Performance Security or to comply with any other condition precedent to signing the contract specified in the Bidding Documents.

We understand this Bid Securing Declaration shall expire if we are not the successful

Bidder, upon the earlier of (i) our receipt of your notification to us of the name of the successful Bidder; or (ii) twenty-eight (28) days after the expiration of our Bid.

Signed: [insert signature of person whose name and capacity are shown] In the capacity of
[insert legal capacity of person signing the Bid Securing Declaration]

Name: [insert complete name of person signing the Bid Securing Declaration]

Duly authorized to sign the Bid for and on behalf of: [insert complete name of Bidder]

Dated on        day of       ,       [insert date of signing]
Corporate Seal (where appropriate)

📑 Contract Form (CNF)

Annual Tender FY 2026-27 (Stationary & IT)

Published on: Friday, November 20, 2026 11:45 AM

Ref# : P197793
QR Code

SECTION IX: CONTRACT FORMS

 

THIS AGREEMENT made the _____ day of __________ 20_____ between Shaheed Zulfiqar Ali Bhutto Medical, University, Islamabad (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad), Purchase Officer Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory

 (hereinafter called “the Procuring Agency”) of the one part and [name of Bidder] of [city and country of Bidder] (hereinafter called “the Bidder”) of the other part:

 

WHEREAS the Procuring Agency invited Bids for provision of goods, viz., Annual Tender FY 2026-27 (Stationary & IT) (P197793) and has accepted a Bids by the Bidder for the provision of Goods in the sum of [contract price in words and figures] (hereinafter called “the Contract Price”).

 

NOW THIS CONTRACT WITNESSETH AS FOLLOWS:

 

1.   In this Contract words and expressions shall have the same meanings as are respectively assigned to them in the Conditions of Contract referred to.

2.   The following documents shall be deemed to form and be read and construed as part of this Contract, In the event of any ambiguity or conflict between the Contract Documents listed below, the order of precedence shall be the order in which the Contract Documents are listed below:-

  1. This form of Contract;
  2. the Form of Bids and the Price Schedule submitted by the Bidder;
  3. the Schedule of Requirements;
  4. the Technical Specifications;
  5. the Special Conditions of Contract;
  6. the General Conditions of the Contract;
  7. the Procuring Agency’s Letter of Acceptance; and
  8. [add here: any other documents]

3.   In consideration of the payments to be made by the Procuring Agency to the Bidder as hereinafter mentioned, the Bidder hereby covenants with the Procuring Agency to provide the Goods related services and to remedy defects therein in conformity in all respects with the provisions of the Contract.

4.   The Procuring Agency hereby covenants to pay the Bidder in consideration of the provision of Goods and the remedying of defects therein, the Contract Price or such other sum as may become payable under the provisions of the contract at the times and in the manner prescribed by the contract.

 

IN WITNESS whereof the parties hereto have caused this Contract to be executed in accordance with their respective laws the day and year first above written.

 

Signed, sealed, delivered by __________________the ________________ (for the Procuring Agency)

 

Witness to the signatures of the Procuring Agency:

………………………………………………

Signed, sealed, delivered by __________________the ________________ (for the Procuring Agency)

 

Witness to the signatures of the Bidder: …………………………………………………

 

 

📑 Integrity Pact (INP)

Annual Tender FY 2026-27 (Stationary & IT)

Published on: Friday, November 20, 2026 11:45 AM

Ref# : P197793
QR Code

Integrity Pact

DECLARATION OF FEES, COMMISSION AND BROKERAGE ETC. PAYABLE BYTHE SUPPLIERS OF GOODS, SERVICES & WORKS IN  CONTRACTS WORTH RS.10.00 MILLION OR MORE

 

Contract                           Number:  Contract                               Value:  Contract Title:

Dated:

 

[Name of Supplier] hereby declares that it has not obtained or induced the procurement of any contract, right, interest, privilege or other obligation or benefit from Government of Pakistan or any administrative subdivision or agency thereof or any other entity owned or controlled by it (GoP) through any corrupt business practice.

Without limiting the generality of the foregoing [Name of Supplier] represents and warrants that it has fully declared the brokerage, commission, fee etc. paid  or payable to anyone and not given or agreed to give and shall not give or agree to give to anyone within or outside Pakistan either directly or indirectly through any natural or juridical person, including its affiliate, agent, associate, broker, consultant, director, promoter, shareholder, sponsor or subsidiary, any commission, gratification, bribe, finder's fee or kickback, whether described as consultations fee or otherwise, with the object of obtaining or inducing the procurement of a contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP, except that which has been expressly declared pursuant hereto.

[Name of Supplier] certifies that it has made and will make full disclosure of all agreements and arrangements with all persons in respect of or related to the transaction with GoP and has not taken any action or will not take any action to circumvent the above declaration, representative or warranty.

[Name of Supplier] accepts full responsibility and strict liability for making and false declaration, not making full disclosure, misrepresenting fact or taking any action likely to defeat the purpose of this declaration, representation and warranty. It agrees that any contract, right interest, privilege or other obligation or benefit obtained or procured as aforesaid shall, without prejudice to any other right and remedies available to GoP under any law, contract or other instrument, be voidable at the option of GoP.

Notwithstanding any rights and remedies exercised by GoP in this regard, [Name of Supplier] agrees to indemnify GoP for any loss or damage incurred by it on account of its corrupt business practices and further pay compensation to GoP in an amount equivalent to ten time the sum of any commission, gratification, bribe, finder's fee or kickback given by [Name of Supplier] as aforesaid for the purpose of obtaining or inducing the procurement of any contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP.

📑 Performance Guarantee Form (PGF)

Annual Tender FY 2026-27 (Stationary & IT)

Published on: Friday, November 20, 2026 11:45 AM

Ref# : P197793
QR Code

Performance Guarantee Form

 

To:     Shaheed Zulfiqar Ali Bhutto Medical, University, Islamabad (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad), Purchase Officer Office # 522, 5th Floor, SOD SZABMU, Sector G-8/3, Ravi Road., Islamabad Capital Territory

 

WHEREAS [name of Bidder] (hereinafter called “the Bidder”) has undertaken, in pursuance of Contract No.  [reference number of the contract] dated [insert date] for provision of Goods(hereinafter called “the Contract”).

 

AND WHEREAS it has been stipulated by you in the said Contract that the Bidder shall furnish you with a Bank Guarantee by a reputable bank for the sum specified therein as security for compliance with the Bidder’s performance obligations in accordance with the Contract.

 

AND WHEREAS we have agreed to give the Bidders guarantee:

 

THEREFORE, WE hereby affirm that we are Guarantors and responsible to you, on behalf of the Bidder, up to a total of [amount of the guarantee in words and figures], and we undertake to pay you, upon your first written demand declaring the Bidder to be in default under the Contract and without cavil or argument, any sum or sums within the limits of [amount of guar­antee] as aforesaid, without your needing to prove or to show grounds or reasons for your demand or the sum specified therein.

 

This guarantee is valid until the: [insert date]

 

 

Signature and seal of the Guarantors

 

 

_____________________________________________________________________

[name of bank or financial institution]

 

 

_____________________________________________________________________

[address]

 

 

_____________________________________________________________________

[date}

📑 Annexure (ANX)

Annual Tender FY 2026-27 (Stationary & IT)

Published on: Friday, November 20, 2026 11:45 AM

Ref# : P197793
QR Code

Information read only

The terms and conditions to participate in the tender for purchase of STATIONARY, TONERS/ MISCELLANEOUS, IT/ MACHINERY EQUIPMENT, by the Shaheed Zulfiqar Ali Bhutto Medical University (SZABMU), Islamabad are as below:

  1. Bids are invited Single Stage & One Envelope method through e-Pak Acquisition & Disposal System (E-PADS 2.0) as per PPRA rules 2004 from well-established national firms / contractors / dealers / suppliers duly registered with Sales Tax / Income Tax, NTN & GST departments, and registered in (ALT) Active Tax Payer List having offices in Islamabad Rawalpindi, during the Financial Year 2026-27.
  2. The work will be awarded on an item-wise basis to the lowest quoted bidder for each item.
  3. The earnest money will be returned to the unsuccessful bidders immediately after finalization of the tender and in case of successful bidder(s), it will be converted into Security Deposit which will be retained till 30-06-2027 or till the finalization of next tender, whichever is later.
  4. Rates to be quoted inclusive of GST and all taxes and shall be valid upto 30-06-2027 or till the finalization of next tender. The procuring agency may extend contract period beyond 30-05-2027 till finalization of next tender.
  5. Tender to be filled carefully. Bids received with correction/alteration shall not be entertained. Each page must be signed and stamped, incomplete forms will not be accepted.
  6. All the bids must be in typed form, hand written or bids with cutting/fluid or alternation will not be accepted.
Information (Read-Only)

Technical Documents

Technical Submission (Vendor)

Document Required

Financial Documents

Financial Submission (Vendor)

Document Required

📑 Procurement Forms (PFD)

Annual Tender FY 2026-27 (Stationary & IT)

Published on: Friday, November 20, 2026 11:45 AM

Ref# : P197793
QR Code

Past Experience and Completed Contracts

Current Contracts and Their Progress

Financial Capacity and Net Worth Evaluation Form

Average Annual Turnover