In terms of Rule 48 of Public Procurement Rules, 2004 Grievance Redressal Committee (GRC) is notified for the subject procurement and notification copy is available on the procuring agency’s website and on Authority’s website at (www.ppra.org.pk).
Â
Â
Engineering Development Board EDB (MoI&P), DM
EDB compl
ex building 5-A constitution Avenue Islamabad
+92-323-503-3000
aslam@edb.gov.pk
Sections of Prequalifica¬tion Documents
The following specific data for the Prequalification of Applicants shall complement, supplement, or amend the provisions in the Instructions to Applicants (ITA). Whenever there is a conflict, the provisions herein shall prevail over those in ITA.
PDS Clause No
ITA No
Amendments of, and Supplements to, Clauses in the Instructions to Applicants
PDS Clause No 1
ITA No 1.1
Identification Number of the Invitation for Prequalification: P40952
The Procuring Agency is: Engineering Development Board EDB (MoI&P)
List of Contracts:
See section items and Lots
PDS Clause No 2
ITA No 2.1
The name of Procuring Agency is: Engineering Development Board EDB (MoI&P)
The name of Project / Procurement is: EXPRESSION OF INTEREST (EOI) FOR Pre-Qualification for the Second Phase and Subsequent Phases of the PAVE Subsidy Scheme Under NEV Policy 2025-30 Electric Bikes (EV-2 Wheelers)
PDS Clause No 3
ITA No 4.2
Maximum number of members in a Joint Venture (JV): Nil
PDS Clause No 4
ITA No 4.5
A list of debarred firms and individuals is available on PPRA website:https://ppra.gov.pk
PDS Clause No 5
ITA No 7.1
For clarification, the Applicant shall seek clarifications through: EPADS v2.0
PDS Clause No 6
ITA No 7.1 & 8.2
Information related to Prequalification shall be published on: EPADS v2.0
PDS Clause No 7
ITA No 7.2
Pre-Application Meeting: Clarification Date: Tuesday, June 2, 2026
Pre-Bid Meeting: Monday, June 1, 2026 12:00 PM
Venue: EDB complex building 5-A Constitution Avenue, Islamabad
PDS Clause No 8
ITA No 10.1
This Prequalification Document has been issued in the language: English
PDS Clause No 9
ITA No 11.1(d)
Additional documents to be submitted through EPADS v2.0:
PDS Clause No 10
ITA No 14.2
Source for determining exchange rates: Not Applicable
PDS Clause No 11
ITA No 16.1
Deadline for Application Submission:
Day: Tuesday
Date: Tuesday, June 9, 2026
Time: 11:00 AM
PDS Clause No 12
ITA No 17.1
Opening of Applications shall be conducted through: EPADS v2.0
Day: Tuesday
Date: Tuesday, June 9, 2026
Time: 11:30 AM
Virtual participation link: https://vendors.epads.gov.pk/
PDS Clause No 13
ITA No 21.1
Margin of Domestic Preference: Not Applicable
(Applicable only if authorized in Procurement Plan)
PDS Clause No 14
ITA No 29.1
Prequalification-related complaints / grievances shall be submitted in writing through: EPADS v2.0
A complaint may challenge:
| Bidder's Type | Required Registration |
|---|---|
|
Sole Proprietorship Partnership Firm Company (Private Limited) Company (Public Limited) Company (Holding Company) Company (Limited by Guarantee) State Owned Enterprise (Private Limited) State Owned Enterprise (Public Limited) |
FBR (NTN) FBR (GSTN) |
| Eligibility Criteria | Document |
|---|---|
| NTN Certificate | Yes |
| GST Certificate | Yes |
| EDB License | Yes |
| PSQCA Licenses | Yes |
| Product Brochures & Compliance Sheet | Yes |
| Experience Evidence | Yes |
| Financial reports | Yes |
| Bank Statements | Yes |
| Warranty Details | Yes |
| After-Sales Setup EV 2-Wheeler, Pictures, Models, Specifications Any other documents as specified in Annex-A | Yes |
| The bid Submission fee: Pay Order/Bank Draft/Demand Draft of Rs. 5,000 will be paid in favor of Drawing & Disbursement Officer (DDO), EDB and the same will uploaded on PPRA E-Pads as well as submitted in hard form at Drawing & Disbursement Officer (DDO), EDB, office before closing date and time. | Yes |
| Evaluation of bids shall be carried out strictly in accordance with the criteria mentioned in Annex-A: Bidders must ensure that each requirement is fully complied with, supported by verifiable documentary evidence. Failure to meet any mandatory condition shall result in disqualification of the bid, and no further evaluation shall be carried out for such a bidder. | Yes |
Quality Based Selection (QBS)
| Technical Marks | 100 | |
|---|---|---|
| Passing Marks | 70 | |
| Technical Evaluation Criteria | ||
| Confirmation of Localization as per Annex-D (Qualitative)(Doc Required) | 25 | |
| EDB and PSQCA Certifications (Qualitative)(Doc Required) | 5 | |
| Technical Specifications Battery (05 marks)  Type: Lithium Iron Phosphate (LiFePO₄)  Voltage: Minimum 48 V  Warranty: Minimum 3 years or 40,000 km (whichever occurs first)  State-of-Health: Shall not fall below 80 % during the warranty period; replacement required if below threshold.  Labelling: Battery shall display UID Number, Type, Chemistry, Rating (Ah/Wh), Cycle Life, Temperature Range, Form Factor and Number of Cells.  Testing Certificates: (05 marks)  Acceptable pack standards: UL 2271 / GB 38031-2020 /ISO 12405-1:2011 /ISO 6469-1.  Mandatory transport certification: UN/DOT 38.3 or IEC 62281.  For locally assembled packs: cell certification to GB 31484-2015 / GB 31485-  2015 / GB 31486-2015 / IEC 62660 / IEC 62133-2:2017.  A Country-of-Origin (CoO) certificate required if above not available. Motor: (05 marks)  Type: Permanent Magnet Synchronous Motor (PMSM) – brushless only.  Minimum top speed: 45 km/h.  •Ingress Protection: IP-67 or above. Vehicle and Charger Performance: (05 marks)  Range: ≥ 60 km per full charge.  Charging Time: ≤ 6 hours (from 20 % to 100 %).  Charger Efficiency: ≥ 80 %  Speedometer and Odometer Accuracy: ± 2 %.  Data Logger: Mandatory GPS-enabled device with ≤ 5 m accuracy and 90-day history Safety and Environmental Compliance: (05 marks)  Compliance with all applicable PSQCA, EDB and environmental regulations is mandatory. (Qualitative)(Doc Required) | 25 | |
| Warranty and Performance Guarantee Vehicle Warranty (excluding battery): Minimum 2 years or 40,000 km (whichever comes first), covering manufacturing defects only. (Qualitative)(Doc Required) | 10 | |
| General Manufacturing and Operational Criteria  Experience (04 marks): Minimum one-year manufacturing of electric 2-wheelers.  Sales Track Record (03 marks): ≥ 200 units sold with verifiable documentation  Product Pricing (10 marks): At least one model within the price cap of PKR 250,000.  Production Facility (02 marks): Must include assembly line, testing fixtures, battery safety zone, and motor test bench.  Supply Chain (02 marks): Demonstrated vendor linkages for battery, motor, harness, and body components within Pakistan.  Stock Availability (04 marks): Minimum 500 ready units or two months component inventory. (Qualitative)(Doc Required) | 25 | |
| After-Sales and Service Support ď‚§ OEMs shall maintain minimum three service centers in each operating region/province. (03 marks) ď‚§ Technician Training: Staff must be EV-safety-certified. (03 marks) ď‚§ Parts Availability: Written undertaking ensuring spare parts supply for five (5) years post-sale. (04 marks) (Qualitative)(Doc Required) | 10 | |
Â
Submit your bid as per the attached bidding documentÂ
Reference is invited to the advertisement published on May 24, 2026 by Engineering Development Board (EDB) regarding Expression of Interest (EOI) for Pre-Qualification of all Electric Vehicle (EV) 2-Wheelers Original Equipment Manufacturers (OEMs) /Assemblers for PAVE Phase-II & Subsequent Phases.
It is hereby notified for information of all prospective bidders that the following information mentioned in the advertisement may be read as follows:
All other terms and conditions of the RFP shall remain unchanged.
As per the bidding documentÂ
As per the bidding documentÂ
As per the bidding documentÂ