7. In terms of Rules 48 of Public Procurement Rules, 2004 Grievance Redressal Committee (GRC) is notified for the subject procurement and notification copy is available on the procuring agency’s website and on Authority’s website at (www.ppra.org.pk).
FEDERAL GOVERNMENT POLYCLINIC ISLAMABAD (FGPC-PGMI) (Federal Government Polyclinic (FGPC-PGMI)), Joint Executive Director
FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
+92-333-550-9275
jed@fgpc.gov.pk
1.1 The Procuring Agency (PA), as indicated in the Bids Data Sheet (BDS) invites Bids through EPADS v2.0 for the provision of Goods for as specified in the BDS and in Section V – Evaluation Criteria, Specifications & Schedule of Requirements. The name, identification, and number of items/deliverables are provided in the BDS. The successful Bidders will be expected to provide the goods within the specified period and timeline(s) as stated in the BDS.
2.1 Source of funds is referred in Clause-1 of Invitation for Bids.
3.1 A Bidder may be natural person, company or firm or public or semi-public agency of Pakistan or any foreign country, or any combination of them with a formal existing agreement (on Judicial Papers) in the form of a joint venture, consortium, or association. In the case of a joint venture, consortium, or association, all members shall be jointly and severally liable for the execution of the Contract in accordance with the terms and conditions of the Contract. The joint venture, consortium, or association shall nominate a Lead Member as nominated in the BDS, who shall have the authority to conduct all business for and on behalf of any and all the members of the joint venture, consortium, or association during the Bidding process, and in case of award of contract, during the execution of the contract.
3.2 Verifiable copy of the agreement that forms a joint venture, consortium or association shall be required to be submitted as part of the Bid.
3.3 The appointment of Lead Member in the joint venture, consortium, or association shall be confirmed by submission of a valid Power of Attorney to the Procuring Agency.
3.4 Any bid submitted by the joint venture, consortium or association shall indicate the part of proposed contract to be performed by each party and each party shall be evaluated (or post qualified if required) with respect to its contribution only, and the responsibilities of each party shall not be substantially altered without prior written approval of the Procuring Agency and in line with any instructions issued by the Authority.
(The limit on the number of members of JV or Consortium or Association may be prescribed in BDS, in accordance with the guidelines issued by the PPRA).
3.5 The invitation for Bids is open to all prospective suppliers, manufacturers, or authorized agents / dealers subject to any provisions of incorporation or licensing by the respective national incorporating agency or statutory body established for that particular trade or business. Procuring agencies shall specify the registration/licensing requirements for the foreign bidders keeping in view the requirement of that business.
3.6 A Bidder shall not have a conflict of interest. All Bidders found to have a conflict of interest shall be disqualified. A Bidder may be considered to have a conflict of interest with one or more parties in this Bidding process, if they:
3.7 A Bidder may be ineligible if –
3.8 As and when required, bidders shall provide to the Procuring Agency evidence of their eligibility, proof of compliance with the necessary legal requirements to carry out the contract effectively.
3.9 Bidders shall submit Bids relating to the nature, conditions and modalities of sub-contracting wherever the sub-contracting of any elements of the contract amounting to more than ten (10) percent of the Bid price is envisaged.
4.1 All goods and related services to be supplied under the contract shall have their origin in eligible source countries, and all expenditures made under the contract will be limited to such goods and services. For purpose of this Bid, ineligible countries are the countries declared ineligible by the Federal Government.
5.1 A bidder shall submit only one Bid, in the same bidding process, either individually as a Bidder or as a member in a joint venture or any similar arrangement.
5.2 The Bidder shall not engage a subcontractor for any portion of the contract if the value of such subcontracting exceeds thirty percent (30%) of the total contract amount.
6.1 Any cost incurred by the bidder relating to the preparation and submission of its Bid shall be borne by the bidder, and the Procuring Agency shall in no case be responsible or liable for those costs, regardless of the conduct or outcome of the bidding process.
7.1 The Goods required, Bidding procedures, and terms and conditions of the contract are prescribed in the Bidding Documents. In addition to the Invitation for Bids, the Bidding documents which should be read in conjunction with any addenda issued in accordance with ITB 9.1 include:
Section I -Invitation to Bids
Section II Instructions to Bidders (ITB)
Section III Bid Data Sheet (BDS)
Section IV Evaluation Criteria, Specifications, Schedule of Requirements
Section V Bid Forms
Section VI General Conditions of Contract (GCC)
Section VII Special Conditions of Contract (SCC)
Section VIII Contract Forms
7.2 The Bidder is expected to examine all instructions, forms, terms and specifications in the Bidding documents. Failure to furnish all the information required in the Bidding documents through EPADS v2.0 will be at the Bidder’s risk and may result in the rejection of his Bids.
8.1 A prospective Bidder requiring any clarification of the Bidding documents may notify the Procuring Agency through EPADS v2.0.
8.2 The Procuring Agency will within three (3) working days after receiving the request for clarification, respond to any request for clarification through EPADS v2.0 provided that such request is received not later than three (03) days prior to the deadline for the submission of Bids as prescribed in ITB 22
8.3 Copies of the Procuring Agency's response will be forwarded to all identified Prospective Bidders through EPADS v2.0, including a description of the inquiry, but without identifying its source.
8.4 Should the Procuring Agency deem it necessary to amend the Bidding document as a result of a clarification, it shall do so following the procedure under ITB 9.
8.5 If indicated in the BDS, the Bidder’s designated representative is invited at the Bidder’s cost to attend a pre-Bid meeting at the place, date and time mentioned in the BDS. During this pre-Bid meeting, prospective Bidders may request clarification of the schedule of requirement, the Evaluation Criteria or any other aspects of the Bidding document.
8.6 Minutes of the pre-Bid meeting, if applicable, including the text of the questions asked by Bidders, including those during the meeting (without identifying the source) and the responses given, together with any responses prepared after the meeting will be uploaded on EPADS v2.0. Any modification to the Bidding documents that may become necessary as a result of the pre-Bid meeting shall be made by the Procuring Agency exclusively through the use of an Addendum pursuant to ITB 9. Non-attendance at the pre-Bid meeting will not be a cause for disqualification of a Bidder.
9.1 Before the deadline for submission of Bids, the Procuring Agency for any reason, whether at its own initiative or in response to a clarification requested by a prospective Bidder or Pre-Bid meeting may modify the Bidding documents by issuing addenda through EPADS v2.0.
9.2 The Procuring Agency shall promptly publish the addendum through EPADS v2.0.
9.3 Any addendum issued including the notice of any extension of the deadline shall also be communicated through EPADS v2.0 to all the bidders who have already submitted their bids. Such bidders shall have the right to withdraw their already submitted bid and re-submit the revised bid prior to the original or extended bid submission deadline.
9.4 To give prospective Bidders reasonable time in which to take an addendum/corrigendum into account in preparing their Bids, the Procuring Agency may, at its discretion, extend the deadline for the submission of Bids through EPADS v2.0:
Provided that the Procuring Agency shall extend the deadline for submission of Bids, if such an addendum is issued within last three (03) days of the Bids submission deadline.
10.1 The Bid prepared by the bidder, as well as all correspondence and documents relating to the Bids exchanged by the Bidder and the Procuring Agency shall be written in the English language unless otherwise specified in the BDS. Supporting documents and printed literature furnished by the Bidder may be in another language provided they are accompanied by an accurate translation of the relevant pages in the English language unless otherwise specified in the BDS, in which case, for purposes of interpretation of the Bidder, the translation shall govern.
11.1 The Bid prepared by the Bidder shall constitute thedocuments required in the BDS.
Details of sample(s) where applicable and requested in the BDS.
1. Documentary evidence established in accordance with ITB that the Bidder is eligible and/or qualified for the subject bidding process;
2. Documentary evidence establish that the Bidder has been authorized by the manufacturer to deliver the goods into Pakistan, where required and where the supplier is not the manufacturer of those goods;
3. Documentary evidence establish that the goods and related services to be supplied by the Bidder are eligible goods and services, and conform to the Bidding Documents;
4. Bid security or Bid Securing Declaration furnished in accordance with ITB 18.
12.1 To establish the conformity of the bidder to the Bidding document, the Bidder shall furnish as part of its Bids the documentary evidence that Goods provided conform to the technical specifications and standards.
13.1 The Bidder shall furnish, as part of itsBid, all those documents establishing the Bidder’s eligibility to participate in the Bidding process and/or its qualification to perform the contract if its Bid is accepted.
14.1 The Bidder shall fill the Form of Bid furnished in the Bidding documents.The Bids Form must be completed without any alterations to its format and no substitute shall be accepted.
15.1 The Bids Prices quoted by the Bidder in the Form of Bid and in the Price Schedules shall conform to the requirements specified below or exclusively mentioned hereafter in the Bidding documents.
15.2 All items in the Schedule of Requirement must be listed and priced separately in the Price Schedule(s). If a Price Schedule shows items listed but not priced and neither explicitly denied, their prices shall be construed to be included in the prices of other items.
15.3 Items not listed in the Price Schedule shall be assumed not to be included in the Bid, and provided that the Bid is still substantially responsive in their absence or due to their nominal nature, the corresponding average price of the respective item(s) of the remaining substantially responsive Bidder(s) shall be construed to be the price of those missing item(s)
15.4 The Bid price to be quoted in the Form of Bid in accordance with ITB 14.1 shall be the total price of the Bid.
15.5 The Bidder shall indicate on the appropriate Price Schedule, the unit prices (where applicable) and total Bid price of the Goods it proposes to provide under the contract.
15.6 Prices quoted by the Bidder shall be fixed during the Bidder’s performance of the contract and not subject to variation on any account. A Bid submitted with an adjustable price will be treated as non-responsive and shall be rejected.
16.1 Prices shall be quoted in Pakistani Rupees unless otherwise specified in the BDS in accordance with Rule 30 (2) of the Public Procurement Rules, 2004.
17.1 Bids shall remain valid for the period specified in the BDS after the Bid submission deadline prescribed by the Procuring Agency. A Bid valid for a shorter period shall be rejected by the Procuring Agency as non-responsive. The period of Bid validity will be determined from the complementary Bid securing instrument, i.e. the expiry period of Bid Security or Bids Securing Declaration as the case may be.
17.2 The procuring agency shall ordinarily be under an obligation to process and evaluate the bid and to issue letter of award within the stipulated bid validity period.
17.3 Under exceptional circumstances, prior to the expiration of the initial Bid validity period, the Procuring Agency may request the Bidders’ consent to an extension of the period of validity of their Bids only once through EPADS v2.0, for the period not more than the period of initial bid validity. The Bid Security provided under ITB 18 shall also be suitably extended. A Bidder may refuse the request without forfeiting its Bid security or causing to be executed its Bid Securing Declaration. A Bidder agreeing to the request will not be required nor permitted to modify its Bid, but will be required to extend the validity of its Bid Security or Bid Securing Declaration for the period of the extension.
18.1 The Bidder shall furnish as part of its Bid, a Bid Security in accordance with Rule 25 of the Public Procurement Rules, 2004.
18.2 The original Bid Security shall be enclosed within the sealed envelope and to be submitted physically before closing time for submission of bids. Whereas, scanned copy of bid security shall be uploaded electronically through EPADS v2.0 before closing hours for submission of bids.
18.3 The Bidder who failed to submit the original Bids security before the submission deadline shall be disqualified straightaway.
18.4 The Bid Security or Bid Securing Declaration is required to protect the Procuring Agency against the risk of Bidder’s conduct which would warrant the security’s forfeiture, pursuant to ITB 18.7.
18.5 The Bid Security shall be denominated in the local currency, and it shall be a Bank Draft in the name of the Procuring Agency and valid for twenty-eight (28) days beyond the end of the validity of the Bid. This shall also apply if the period for Bids/Bid Validity is extended. In either case, the form must include the complete name of the Bidder.
18.6 The Bid Security shall be payable promptly upon written demand by the Procuring Agency in case any of the conditions listed in ITB 18 are invoked.
18.7 Unsuccessful Bidders’ Bid Security will be discharged or returned as promptly as possible, however in no case later than thirty (30) days after the expiration of the period of Bids Validity prescribed by the Procuring Agency pursuant to ITB 17. The Procuring Agency shall make no claim to the amount of the Bid Security, and shall promptly return the Bid Security document, after whichever of the following that occurs earliest:
18.8 The successful Bidder’s Bids Security will be discharged upon the Bidder signing the contract, or furnishing the Performance Guarantee.
18.9 The Bid Security may be forfeited or the Bid Securing Declaration executed:
19.1 Before Bid submission deadline, any Bidder may withdraw, substitute, or modify its Bid after it has been submitted through EPADS v2.0. Bids requested to be withdrawn, shall be returned unopened to the Bidders through EPADS v2.0.
20.1 The Bidder shall prepare and submit Bids with due diligence after carefully reading all the terms and condition before bid submission deadline through EPADS v2.0.
21.1 The Technical and Financial Bids if required to submitted, shall be submitted on EPADS v2.0.
22.1 Bids shall be received by the Procuring Agency through EPADS v2.0 before bid submission deadline.
22.2 The Procuring Agency may, under exceptional circumstances, extend the deadline for the submission of Bids, after recording reasons in writing and in an equal opportunity manner.
In such case, all rights and obligations of the Procuring Agency and the Bidders that were previously governed by the original deadline shall thereafter be subject to the revised deadline.
23.1 The Bid Evaluation Committee of the Procuring Agency shall open all Bids through the EPADS v2.0, on the date and time specified in the Bid Data Sheet (BDS).
23.2 The Bid Evaluation Committee shall generate minutes through EPADS v2.0 containing brief details of bid opening process. The record of the Bid opening shall include, as a minimum: the name of the Bidder, the Bid price if applicable, and the presence or absence of a Bid Security or Bid Securing Declaration.
23.3 The procuring agency shall live broadcast the opening of bids on national media or on their website or digital channels, if the volume of procurement exceeds five hundred million rupees in case of goods and services and one thousand million rupees in case of works.
23.4 In case the date of opening of bid has been declared as public holiday or the procuring agency fail to open bid due to any EPADS v2.0 related issues, the submission and opening of bids shall be shifted to the next working day on the same time.
23.5 In case of Single Stage One Envelope Procedure, the Bidders names, the Bid prices, the total amount of each Bid and, the presence or absence of Bid Security, Bid Securing Declaration and such other details as the Procuring Agency may consider appropriate, will be announced by the Bid Evaluation Committee.
24.1 To assist in the examination, evaluation and comparison of Bids of the Bidders, the Procuring Agency may, ask any Bidder for a clarification of its Bid including breakdown of prices.
24.2 The request for clarification and the response shall be sought through EPADS v2.0 before three days prior to the deadline for submission of bids. No change in the prices or substance of the Bids shall be sought, offered, or permitted.
24.3 The alteration or modification in the BIDS which in any way affect the following parameters will be considered as a change in the substance of a Bids:
24.4 From the time of Bids opening to the time of Contract award if any Bidder wishes to contact the Procuring Agency on any matter related to the Bids it should do so through EPADS v2.0.
25.1 Prior to the detailed evaluation of Bids, the Procuring Agency will determine whether each Bid:
25.2 The Procuring Agency's determination of a Bid's responsiveness will be based on the contents of the Bid itself.
25.3 A substantially responsive Bid is one which conforms to all the terms, conditions, and specifications of the Bidding documents, without material deviation or reservation. A material deviation or reservation is one that: -
25.3 If a Bids is not substantially responsive, it will be rejected by the Procuring Agency and may not subsequently be evaluated for complete technical responsiveness.
26.1 The Procuring Agency shall examine the Bids to confirm that all terms and conditions specified in the GCC and the SCC have been accepted by the Bidder without any material deviation or reservation.
26.2 The Procuring Agency shall evaluate the technical aspects of the Bids submitted, to confirm that all requirements specified in Schedule of Requirements and Technical Specifications of the Bidding documents have been met without material deviation or reservation.
26.3 If after the examination of the terms and conditions and the technical evaluation, the Procuring Agency determines that the Bid is not substantially responsive in accordance with ITB 25.2, it shall reject the Bid.
27.1 Bids determined to be substantially responsive will be checked for any arithmetic errors. Errors will be corrected as follows: -
27.2 The amount stated in the Bid will, be adjusted by the Procuring Agency in accordance with the above procedure for the correction of errors and, with the concurrence of the Bidder, shall be considered as binding upon the Bidder. If the Bidder does not accept the corrected amount, its Bid will then be rejected, and the Bid Security may be forfeited or the Bids Securing Declaration may be executed.
28.1 To facilitate evaluation and comparison, the Procuring Agency will convert all Bids prices expressed in the amounts in various currencies in which the Bids prices are payable. For the purposes of comparison of bids quoted in different currencies, the price shall be converted into a single currency specified in the bidding documents. The rate of exchange shall be the selling rate prevailing on the date of opening of financial bids specified in the bidding documents, in accordance with weighted average customer exchange rates list issued by the State Bank of Pakistan on that day.
29.1 The Bids, quotations, or proposals shall be evaluated by the respective evaluation committees as per evaluation criteria described in the Bidding Documents in accordance with Rule 29 and 30 of the Public Procurement Rules, 2004.
1. Least Cost Based Selection (LCBS)
After meeting the requirements of eligibility, qualification and substantial responsiveness, the bid in compliance with all the mandatory (technical) specifications/requirements and/or requisite quality threshold (if any), and having lowest evaluated cost (or financial proposal) shall be considered Successful Bid.
2. Quality and Cost Based Selection (QCBS)
In such combination, there shall be some specific weightage of both the technical features and financial aspects of the proposal. The financial marks shall be awarded on the basis of inverse proportion calculations. The successful bid shall be declared, on the basis of combined evaluation.
3. Quality Based Selection (QBS)
Atter meeting the requirements of eligibility, qualification and substantial responsiveness the bid in compliance with all the mandatory (technical) specifications/requirements and attaining highest marks in the Technical Evaluation considering all other qualitative and/or quantitative parameters (or point rated criteria) for technical proposal(s) such as working methodology, implementation plan, resource allocation, additional functionalities, risk management approach, knowledge transfer techniques, post implementation methodology etc. shall be treated as highest ranked bid. Later on, the financial proposal of highest ranked bidder shall be opened, however, in case of failure to proceed further with such a bidder, the procuring agency may resort to second highest bidder and so on.
29.2 In case of tie of bids, the bidders shall be provided an opportunity to offer their best and final monetary offer through EPADS v2.0. However, in no case the rates shall be higher than the original financial bids.
30.1 The procuring agency shall evaluate and compare bids, allow for preference to domestic bidders, while competing with the international bidders in accordance with the policies of Federal Government.
The percentage of preference, to be accorded shall be clearly mentioned in the bidding documents under the bid evaluation criteria.
31.1 Selection technique will be adopted for determining the Successful Bid in accordance with the criteria referred in the BDS or prescribed in the separate section titled as Evaluation Criteria.
31.2 In case where the Procuring Agency adopts the Cost Based Evaluation Technique and, the Bid with the lowest evaluated price from amongst those which are eligible, compliant and substantially responsive shall be the Successful Bid.
31.3 The Procuring Agency may adopt the Quality & Cost Based Selection Technique due to the following two reasons:
1. Where the Procuring Agency knows about the main features, usage and output of the products; however not clear about the complete features, technical specifications and functionalities of the goods to be procured and requires the bidders to submit their proposals defining those features, specifications and functionalities; or
2. Where the Procuring Agency, in addition to the mandatory requirements and mandatory technical specifications, requires parameters specified in Evaluation Criteria to be evaluated while determining the quality of the goods.
31.4 In such cases, the Procuring Agency may allocate certain weightage to these factors as a part of Evaluation Criteria, and may determine the ranking of the bidders on the basis of combined evaluation in accordance with provisions of Rule 2(1)(h) of the Public Procurement Rules, 2004.
32.1Where the Bid price is considered to be abnormally low, the Procuring Agency shall perform price analysis either during determination of Successful Bids or as a part of the post-qualification process.
32.2 The Procuring Agency may reject an Abnormally low financial bids.
32.3 In order to identify the Abnormally Low Bids (ALB) following approaches can be considered to minimize the scope of subjectivity:
32.4 The Procuring Agency will determine to its satisfaction whether the Bidder that is selected as having submitted the successful bid is qualified to perform the contract satisfactorily.
32.5 The determination will take into account the Bidder’s financial, technical, and production capabilities. It will be based upon an examination of the documentary evidence of the Bidder’s qualifications submitted by the Bidder, as well as such other information as the Procuring Agency deems necessary and appropriate. Factors not included in these Bidding documents shall not be used in the evaluation of the Bidders’ qualifications.
32.6 Procuring Agency may seek “Certificate for Independent Price Determination” from the Bidder and the results of reference checks may be used in determining an award of contract.
Explanation: The Certificate shall be furnished by the Bidder. The Bidder shall certify that the price is determined keeping in view of all the essential aspects such as raw material, its processing, value addition, optimization of resources due to economy of scale, transportation, insurance and margin of profit etc.
32.7 An affirmative determination will be a prerequisite for award of the contract to the Bidder. A negative determination will result in rejection of the Bidder’s Bids, in which event the Procuring Agency will proceed to the next ranked Bidder to make a similar determination of that Bidder’s capabilities to perform satisfactorily.
33.1 The Procuring Agency will award the Contract to the Bidder whose Bids has been determined to be substantially responsive to the Bidding documents and who has been declared as Most Advantageous Bidder.
34.1 The procuring agency shall not engage in negotiations with respect to scope and price with the bidder except when the procuring agency conducts a procurement using direct or negotiated contracting or a request for proposals with evaluation based on quality alone.
34.2 The procuring agency may negotiate with the most advantageous bid with a view to streamline the work or task execution, at the time of contract finalization on methodology, work plan, staffing, finalizing payment arrangements, delivery arrangements, minor amendments to the special conditions of the contract.
35.1 The Procuring Agency reserves the right to reject all bids or proposals at any time prior to the issuance of the Letter of Award, without incurring any liability, in accordance with Rule 33 of the Public Procurement Rules, 2004.
36.1 The Procuring Agency reserves the right at the time of contract award to increase or decrease the quantity of Goods originally specified in these Bidding documents provided this does not exceed by 15%, without any change in unit price or other terms and conditions of the Bids and Bidding documents.
37.1 Prior to the award of contract, the procuring agency shall announce and publish the result of bid evaluation on EPADS v2.0 in accordance with Rule 35 of the Public Procurement Rules, 2004.
37.2 The Bidder whose Bids has been accepted will be notified of the award by the Procuring Agency prior to expiration of the Bids/Bid Validity period. The Letter of Award will state the sum that the Procuring Agency will pay the successful Bidder in consideration for the delivery of Goods as prescribed by the Contract (hereinafter and in the Contract called the "Contract Price).
37.3 The Letter of award will constitute the formation of the Contract, subject to the Bidder furnishing the Performance Guarantee and signing of the contract.
38.1 Promptly after issuance of Letter of award, Procuring Agency shall send the successful Bidder the draft Contract, incorporating all terms and conditions as agreed by the parties to the contract.
38.2 Immediately after the Redressal of grievance by the GRC (if any), mandatory standstill period in accordance with Rule 35 of the Public Procurement Rules, 2004 and after fulfillment of all condition’s precedent of the Contract Form, the successful Bidder and the Procuring Agency shall sign the Contract.
39.1 Procuring Agencies (including beneficiaries of Government funded projects and procurement) as well as Bidders/Contractors under Government financed contracts, observe the highest standard of ethics during the procurement and execution of such contracts, and will avoid to engage in any corrupt and fraudulent practices.
40.1 The Grievance Redressal Committee shall address the grievance, if any submitted by any party, including the bidder, in accordance with Rule 48 of the Public Procurement Rules, 2004 to be read with Redressal of Grievances Regulations, 2021.
40.2 In case if any party or the bidder is not satisfied with the decision of the GRC or if it fails to decide within ten days, the bidder or the party may file an appeal before the Appellate Committee of the Authority in accordance with Rule 48 of the Public Procurement Rules, 2004 to be read with Redressal of Grievances Regulations, 2021.
41.1 The Procuring Agency shall initiate blacklisting proceedings against any bidder, supplier, or contractor in accordance with the Mechanism for Blacklisting Regulations, 2024, read with Rule 19 of the Public Procurement Rules, 2004.
41.2 The blacklisted/debarred bidder may file the review petition before the Authority in accordance with Rule 19 of the Public Procurement Rules, 2004 to be read with Procedure of filing and disposal of Review Petitions Regulations, 2021.
The following specific data for the procurement of Goods to be procured shall complement, supplement, or amend the provisions in the Instructions to Bidders (ITB). Whenever there is a conflict, the provisions herein shall prevail over those in ITB.
BDS Clause Number 1
ITB Number 1.1
Name of Procuring Agency: FEDERAL GOVERNMENT POLYCLINIC ISLAMABAD (FGPC-PGMI) (Federal Government Polyclinic (FGPC-PGMI))
The subject of procurement is: Re-Tender for Purchase of Electro-Medical Equipment/s of General Surgery Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.
Expected commencement date: Monday, August 31, 2026
BDS Clause Number 2
ITB Number 2.1
Financial year for the operations of the Procuring Agency: 2026-27
Name and identification number of the Contract: P45962
BDS Clause Number 3
ITB Clause Number 3.1
JV/Consortium or Association Allowed: No
Number of JV/Consortium Members: Nil
see section of eligibility criteria.
BDS Clause Number 4
ITB Number 8.1
The Bidders may seek clarifications through EPADS v2.0 : Clarification Date: Wednesday, June 17, 2026
BDS Clause Number 5
ITB Number 10.1
The Language of all correspondences and documents related to the Bids shall be in: English
List of documents required along with the bid:
BDS Clause Number 6
ITB Number 11.1
Items/Lots and threre related documents:
See section items and Lots
BDS Clause Number 7
ITB Number 12.1
Items / Lots Specifications:
see section of items specifications.
BDS Clause Number 8
ITB Number 15.6
The price shall be Fixed.
BDS Clause Number 9
ITB Number 16.1
Currency of the Bids shall be : PKR
BDS Clause Number 10
ITB Number 17.1
The Bids/Bid Validity period shall be: 180 Days
BDS Clause Number 11
ITB Number 18.1
The amount of Bid Security shall be as defined in Bid Security Section for items and lots given in BDS 6
The Bid Security shall be in the form of: Pay Order, Call at Deposit
BDS Clause Number 12
ITB Number 20.1
Bid shall be submitted online on EPADS v2.0 whereas hard copy of the bid security should be submitted to the following;
FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory before bid submission deadline.
Bids that are not submitted on EPADS v2.0 shall be disqualified.
The deadline for Bids submission is: Friday, June 26, 2026 09:00 AM
BDS Clause Number 13
ITB Number 23.1
The Bids opening shall take place on EPADS v2.0.
Day : Friday
Date: Friday, June 26, 2026
Time : 09:30 AM
BDS Clause Number 14
ITB Number 31.1
Selection technique adopted will be: Least Cost Based Selection (LCBS)
see Evaluation Criteria
BDS Clause Number 15
ITB Number 41.1
Grievence against this procurement shall be submitted online on EPADS v2.0.
Arbitrator shall be appointed by mutual consent of the both parties.
| Bidder's Type | Required Registration |
|---|---|
|
Individual / Individual Consultant Sole Proprietorship Partnership Firm Company (Private Limited) |
NADRA CITIZENSHIP (CNIC/NICOP) FBR (NTN) FBR (GSTN) |
| Eligibility Criteria | Document |
|---|---|
| Name of the Firm, Postal Address Telephone Number, Cell No.Fax # and Email address. | Yes |
| Name, Designation & specimen signature of owner/authorized person of the firm along with CNIC copies. | Yes |
| Distribution office/sub-office/warehouse/workshop in twin cities i.e. Rawalpindi & Islamabad | Yes |
| Authorization from Manufacturer or through its Sole Agent. In case of Distributor/sole agent the bidder must provide valid sole authorization certificate of all quoted product/s issued by the manufacturer or its exclusive sole agent. If manufacturer is directly applying he will attach prof of its manufacturer. | Yes |
| Technical Specification The bid must strictly comply with the advertised technical specifications of the quoted single item or complete package (as published in the tender). Any deviation from the specification of main equipment may result in straightaway rejection. However minor deviation in the accessories/instruments will be acceptable subject to the acceptance of procurement committee. | Yes |
| Quality Certifications. The products must comply with at least one or dual (specified in the specifications) of the following regulatory standards as required in technical specifications: (attached documentary of each quoted items/ equipment/s) a) FDA 510K b) CE (CE marked by conformity assessment bodies (CABs) notified in NANDO database under the relevant European directive for medical devices will be accepted only) c) MHLW d) In case of local instrument, CE or ISO13485 must be provide | Yes |
| Original brochure The firm must attach the brochure of all quoted Product/s along with its model that must be currently listed on the official website of the manufacturer. | Yes |
| Declaration of After-Sales Infrastructure Evaluation Declaration on letter head The infrastructure proposed by the bidder for after-sales services shall be evaluated for adequacy and compliance with the technical specifications and requirements outlined in the bidding documents. (committee can visit the office to evaluate if required) | Yes |
| Declaration of Accessories The bidder must clearly declare on letter head the make, model, and country of origin of all accessories included with the equipment other than main equipment. | Yes |
| Firm must have minimum one PEC Registered biomedical Engineer OR 01 PEC Professional Engineer (Electrical/Electronics) with 10 years’ experience. | Yes |
| Valid/updated document/s of manufacturer related to product. | Yes |
| The bidder will provide bank statement of last 03 (three) financial years (from 1st July to 30th June) i.e 2022-23, 2023-24 & 2024-25 | Yes |
| The bidder will provide 03 years audit report of chartered accountant for the years 2022-23, 2023-24 & 2024-25. | Yes |
| The bidder/vendor should have minimum 03 years experience for supply of electro medical equipment to public sector hospitals/Tertiary care Hospitals independently or through International Agencies and NGO’s (attach documentary proof). | Yes |
| The bidder must provide/attach satisfactory performance certificate regarding supplies/ services of electro-medical equipment issued by the public sector hospitals/Tertiary care Hospitals | Yes |
| Affidavit of non-blacklisting. The bidder must submit an affidavit on stamp paper worth Rs. 100/- declaring that the firm has not been blacklisted by any Federal or Provincial Government department, or any public sector organization within Pakistan. | Yes |
| •Ensures / undertakes on legally notarized stamp paper that it has no litigation(s) or arbitrary cases by any department, is not insolvent, in receivership, bankrupt or being penalized and its activities or affairs are not suspended or being administered under any Act, by a court or by a judicial officer. | Yes |
| Ensures / undertakes on legally notarized stamp paper that item/s will be delivered at FGPC by the bidder at its own expense. All freight/damages till final installation will be the responsibility of the vendor. | Yes |
| Ensures / undertakes on legally notarized stamp paper that the quoted product will be guaranteed/ warranted as per applicable rules. | Yes |
| Ensures / undertakes on legally notarized stamp paper that all documentation submitted with the bid is valid, authentic and genuine. No facts have been hidden and no forgery/false declaration has been made. If any such discrepancy is found at any stage, M/s ………….. Will be fully responsible for such miscommunication/ concealment of facts and will be liable for disciplinary action under PPRA Rules and tender TORs. | Yes |
| Ensures / undertakes on legally notarized stamp paper that the offered discount in the tender is not less than the offered discount in any other government hospital on same TOR’s. In case of any discrepancy found at any stage, the M/s………… will be bound to refund the excess amount through challan in government treasury or excess amount will be deducted from the outstanding bills/CDR. | Yes |
Eligibile bidder(s) with substantially responsive bid(s) offering Least Cost Based Selection (LCBS) shall be consider for the award of contract(s).
Least Cost Based Selection (LCBS)
| Technical Marks | 196 | |
|---|---|---|
| Passing Marks | 137 | |
| PEC Registered Engineer (Biomedical) (Quantitative)(Doc Required) | ||
| • 03 Biomedical Registered Engineers with valid PEC registration (Quantitative)(Doc Required) | 15 | |
| • 02 Biomedical Registered Engineers with valid PEC registration (Quantitative)(Doc Required) | 10 | |
| • 01 Biomedical Registered Engineers with valid PEC registration (Quantitative)(Doc Required) | 5 | |
| Availability of proper workshop with proper tools (Attach pictorial evidence and along with list of tools/equipment) | ||
| Local Workshop in ICT/ Rawalpindi (Quantitative)(Doc Required) | 10 | |
| workshop other than the mentioned cities (Quantitative)(Doc Required) | 5 | |
| History of installation of Electromedical/bio-medical equipment only in public sector teaching Institute/Hospital. (Documentary evidence required, Experience of authorized distributor and exclusive sole distributor will also be considered.): | ||
| • 5-8 supply/installation (Quantitative)(Doc Required) | 20 | |
| • 4-5 supply/installation (Quantitative)(Doc Required) | 10 | |
| • 2-3 supply/installation (Quantitative)(Doc Required) | 8 | |
| Vendor Past Performance of quoted equipment only in Public sector teaching Institute/Hospital. provision of performance report issued by the public sector teaching institution /hospitals regarding services/performance of quoted equipment. | ||
| Excellent performance (Quantitative)(Doc Required) | 15 | |
| Very Good Performance (Quantitative)(Doc Required) | 11 | |
| Good Performance (Quantitative)(Doc Required) | 7 | |
| Satisfactory Performance (Quantitative)(Doc Required) | 5 | |
| Financial Capability Assessed based on annual business turnover (supported by financial statements): Attach documentary evidence | ||
| Above 100 million (Quantitative)(Doc Required) | 20 | |
| Above 50 million to 100 (Quantitative)(Doc Required) | 15 | |
| 20 to 50 million : 10 (Quantitative)(Doc Required) | 10 | |
| DRAP Certification. DRAP Registration certificate: | ||
| Form 4 and form 8 (Quantitative)(Doc Required) | 10 | |
| Form 4 (Quantitative)(Doc Required) | 5 | |
| Bidder Experience in supplying medical equipment Attach documentary evidence | ||
| Above 4 years or above (Quantitative)(Doc Required) | 10 | |
| 3 to 4 years (Quantitative)(Doc Required) | 5 | |
Items Without Lots :
| Item | UNSPSC | Delivery Schedule | Quantity | Bid Security | Manufacturer / Dealer Authorization | Warranty |
|---|---|---|---|---|---|---|
| Laparoscopy Unit | General Laparoscopy |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 1
|
1 | 150000 | Any | 3 Years |
| Laparoscopic tower for emergency surgeries 4k | General Laparoscopy |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 1
|
1 | 100000 | Any | 3 Years |
| Laparscopic Basic sets | Laparoscopes or laparoscopic telescopes |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 2
|
2 | 20000 | Any | 3 Years |
| Vascular Clamp Set | Surgical clamp or forcep or surgical ligator accessories |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 2
|
2 | 10000 | Any | 3 Years |
| New Cautery Machines | Diathermy units |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 2
|
2 | 20000 | Any | 3 Years |
| VESSEL SEALER GENERATOR | Endoscopic vessel sealing and cutting attachments |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 1
|
1 | 50000 | Any | 3 Years |
| splits Thornas | Orthopedic splint systems |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 10
|
10 | 20000 | Any | 3 Years |
| Self Retaining Retractors Omni-track | Surgical retractors |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 2
|
2 | 6000 | Any | 3 Years |
| Ligature hand pieces (Open) | Surgical instrument holders or positioners |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 50
|
50 | 50000 | Any | 3 Years |
| Ligature hand pieces ( Laproscopic) | Surgical instrument holders or positioners |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 50
|
50 | 100000 | Any | 3 Years |
| Portable Ultrasound | Ultrasound |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 1
|
1 | 15000 | Any | 3 Years |
| Nerve stimulator | Surgical nerve stimulators |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 1
|
1 | 5000 | Any | 3 Years |
| Blood warmer | Blood warming or transfusion systems |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 2
|
2 | 6000 | Any | 3 Years |
| Choledochoscope | Diagnosis of choledochal cyst |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 1
|
1 | 40000 | Any | 3 Years |
| Dermatome with accessories | Surgical dermatomes or dermabraders or dermameshers |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 1
|
1 | 40000 | Any | 3 Years |
| Flexible sigmoidoscope | Sigmoidoscopes |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 1
|
1 | 20000 | Any | 3 Years |
| Laser machine with accessories | Surgical lasers |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 1
|
1 | 40000 | Any | 3 Years |
| Laparoscopic bariatric sets | Laparoscopes or laparoscopic telescopes |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 1
|
1 | 20000 | Any | 3 Years |
| Sterilization solution sprayer | Air sterilizer |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 4
|
4 | 20000 | Any | 3 Years |
| Suction machine Heavy duty | Mobile medical services suction antichoke devices |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 4
|
4 | 40000 | Any | 3 Years |
| Laparoscopic stapling guns | Medical powered stapling system or accessories for internal use |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 8
|
8 | 50000 | Any | 3 Years |
| Open stapling guns | Medical powered stapling system or accessories for internal use |
Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
Schedule: With in 120 days after issuance of Supply Order
Quantity: 30
|
30 | 500000 | Any | 3 Years |
Yes
| Item | UNSPSC | Related Services |
|---|---|---|
| Laparoscopy Unit | General Laparoscopy | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Laparoscopic tower for emergency surgeries 4k | General Laparoscopy | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Laparscopic Basic sets | Laparoscopes or laparoscopic telescopes | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Vascular Clamp Set | Surgical clamp or forcep or surgical ligator accessories | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| New Cautery Machines | Diathermy units | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| VESSEL SEALER GENERATOR | Endoscopic vessel sealing and cutting attachments | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| splits Thornas | Orthopedic splint systems | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Self Retaining Retractors Omni-track | Surgical retractors | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Ligature hand pieces (Open) | Surgical instrument holders or positioners | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Ligature hand pieces ( Laproscopic) | Surgical instrument holders or positioners | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Portable Ultrasound | Ultrasound | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Nerve stimulator | Surgical nerve stimulators | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Blood warmer | Blood warming or transfusion systems | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Choledochoscope | Diagnosis of choledochal cyst | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Dermatome with accessories | Surgical dermatomes or dermabraders or dermameshers | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Flexible sigmoidoscope | Sigmoidoscopes | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Laser machine with accessories | Surgical lasers | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Laparoscopic bariatric sets | Laparoscopes or laparoscopic telescopes | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Sterilization solution sprayer | Air sterilizer | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Suction machine Heavy duty | Mobile medical services suction antichoke devices | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Laparoscopic stapling guns | Medical powered stapling system or accessories for internal use | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
| Open stapling guns | Medical powered stapling system or accessories for internal use | Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period. |
Items Without Lots :
Item: Laparoscopy Unit
UNSPSC: General Laparoscopy
Specifications / Requirements:
| 3D Laparoscopic Unit with basic set | ||
|---|---|---|
| Sr.# | Description | Quantity |
| Name: 3D Laparoscopic Unit with basic set | ||
| Quantity: 01 | ||
| Description | ||
| 1 | Brand | |
| 2 | Make & Model | |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. | |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. | |
| 5 | Original Technical data sheet | |
| TECHNICAL SPECIFICATIONS | ||
| 1 | 32" Full HD 3D MONITOR OR BETTER (SAME MANUFACTURER) | 1 |
| Medically Approved Monitor | ||
| 2D/3D Switiching Button | ||
| Panel Type: LCD (IPS) (Better or More) | ||
| LED Backlight | ||
| Anti-Reflective Panel | ||
| Max Brightness(cd/m2): 650 (Better or More) | ||
| Resolution: 1920 x 1080 (Better or More) | ||
| Viewing Angle: 178 deg (Better or More) | ||
| Contrast Ratio : 1400:1 (Better or More) | ||
| Aspect Ratio: 16:9 (Better or More) | ||
| PiP and PoP Function OR MORE | ||
| Video Input: 2x 3G-SDI; 1x S-Video; 1x Video; 2x DVI; 1x RGB (Better or More) | ||
| Video Output: 2x 3G-SDI; 1x DVI; 1x SVideo; 1x Video; 1x RGB (Better or More) | ||
| Max Power Consumption: 97W (OR Better ) | ||
| Weight: 10.2 Kg (OR Better) | ||
| 2 | 3D/2D CAMERA CONTROL UNIT | 1 |
| Permanent prevention of endoscope fogging due to | ||
| integrated heating elements in the endoscope tip. | ||
| Focus-free image. | ||
| CMOS Chip Technology Produces True to Life Image (Better or More) | ||
| Display of Color Bars if no Camera Head is Connected to Camera control unit | ||
| Pre-installed profiles (General, Uro, Gyn, Cardio/Thoracic) (or More) | ||
| Within each Profile Following Settings can be Modified | ||
| (Brightness, Digital Zoom, Contast, Edge Enhancement) (Better or More) | ||
| Image Enhancement Modes: Red Enhancement, (Better or More) | ||
| Smoke Reduction, PoP, Status Indicators On Screen (Better or More) | ||
| Image Noise Reduction, De-Vignetting, Dynamic Contrast(Better or More) | ||
| Brightness Adjustment. | ||
| Combination Mode of Red Enhancement and Smoke reduction (Better or More) | ||
| 3 Freely programmable profiles in addition to 4 Pre-Installed (Better or More) | ||
| 4 Control Buttons on Camera Head & CCU Front to control (Better or More) | ||
| (Light Siource, Menu, Automatic White Balance, and | ||
| conrolling Image/Video Recording) (Better or More) | ||
| White Blance Control From CCU and Camera Head | ||
| Automatic Light Intensity Control in Comination of LED | ||
| Video Output: | ||
| 2 x 3D via 3G HD-SDI (1080p); 2 x 3D via DVI-D (1080p); (Better or More) | ||
| 2 x 2D via DVI-D (1080p); 1 x 2D via HD-SDI (1080i) (Better or More) | ||
| Mains Supply:100-240VAC,50/60Hz | ||
| Max Power Consumption : 120 W or better | ||
| Weight 11KG(or better) | ||
| CF Defibrillation Safe | ||
| 3 | Transportation Box for 3D Camera Heads | 1 |
| 4 | 3D CAMERA HEAD 30 DEG | 1 |
| Integrated Light cable (Monocable Concept) | ||
| Permanent prevention of endoscope fogging due to | ||
| integrated heating elements in the endoscope tip. | ||
| Image Sensor: CMOS or Better | ||
| Sensor Resolution: Native Full HD(1920x1080p) (Better or More) | ||
| Scan Mode: Progressive Scan | ||
| Focus-free image. | ||
| Digital Zoom: 1.8x or better | ||
| Depth of Field: 20-200mm (Better or More) | ||
| Focal Length: 4.6mm (Better or More) | ||
| Endoscope Working length: 315mm (Better or More) | ||
| 4.1m Long Camera Cable (Better or More) | ||
| Endoscope Shaft: 9.3 mm (10.0 mm including sterile camera drape) (Better or More) | ||
| 4 Control Buttons on Camera Head & CCU Front to control (Better or More) | ||
| (Light Siource, Menu, Automatic White Balance, and | ||
| conrolling Image/Video Recording) | ||
| Remote Control Functions: 8 (7 are freely selectable)(Better or More) | ||
| Classification: I | ||
| CF Defibrillation Safe | ||
| 5 | 3D Polarization Glasses Clip-on | 6 |
| 6 | 3D Antifog Polarization Glasses (pack of 5) | 2 |
| 7 | SINGLE USE COVER FOR CAMERA HEAD 0° | 2 |
| 8 | LED LIGHT SOURCE | 1 |
| Lamp lifetime 30,000 Hrs and with Integrated Light Cable Test(Better or More) | ||
| Light Intensity Control via Rotation Knob Steps of 5 (5-100%) (Better or More) | ||
| LCD/LED Front Panel | ||
| Activation/ Deactivation by Camera Head Button | ||
| Automatic Light Intensity Control Feature | ||
| Built-in Anti Glare Protection | ||
| Universal Light Cable Adaptor | ||
| Color temperature: 5,665 K(Better or More) | ||
| Light Flux: 2,510 Lumen(Better or More) | ||
| Weight: 8.5KG(Better or More) | ||
| Max Power Consumption: 240W(Better or More) | ||
| 9 | FLOW 50 L INSUFFLATOR | 1 |
| With Integrated Smoke Evacuation and Gas Heating | ||
| Indication Modes: Standard, Bariartic, Pediatric, Cardio (Better or More) | ||
| Display of Gas Consumption in Liter (Better or More) | ||
| Gas Supply Monitoring by Symbols and Acoustic Signals(Better or More) | ||
| Display: 5.7" Colour Touch Screen (Better or More) | ||
| Maximum CO2 Gas Flow: 50L/Min (Better or More) | ||
| Pressure Range: 1-30mmHg (Better or More) | ||
| Maximum Suction Rate: 12L/Min (Better or More) | ||
| Inlet Pressure Range: 2.7-80 Bar (Better or More) | ||
| Weight: 12Kg(Better or More) | ||
| Max Power Consumption: 120VA (Better or More) | ||
| Compressor with air seal technology if avaialble | ||
| Insufflator Accessories: | ||
| 9.1 | Reusable Heating Tube Set F/Insufflation | 1 |
| 9.2 | CO2 Filter (1 Box = 25 Units) | 2 |
| 9.3 | High Pressure Hose Pipe 5m Length (Better or More) | 1 |
| 9.4 | Smoke Evacuation Filter Cassette (1 Pack= 30 PCS) | 2 |
| 9.5 | Smoke Evacuation Tube With Filter (1 Pack= 10 PCS) | 2 |
| 9.6 | Universal Foot Control | 2 |
| 10 | 2D/ 3D Documentation System- 1TB Storage Internal | 1 |
| Recording of 2D/3D still images and video in Full HD | ||
| resolution (1920 x 1080 pixel)(Better or More) | ||
| Data Storage: Internal, CD/DVD, USB, PACS, Network | ||
| Recording Format of 2D/3D: 1920 x 1080 (Better or More) | ||
| Integration into almost any existing endoscopy tower (Better or More) | ||
| Easy documentation via camera head, USB mouse, | ||
| USB keyboard or touch screen monitor | ||
| DICOM 3.0 compatibility | ||
| image viewing software (compatible with Windows, Andoroid and Apple OS) | ||
| Patient data transfer from KIS System: HL7 (Better or More) | ||
| 2D format for still images JPEG, Bitmap, PNG (Better or More) | ||
| 2D format for videos MPEG-2 and MPEG-4 (AVC/H.264) (Better or More) | ||
| 3D format for still images MPO, PNS (Better or More) | ||
| 3D format for videos MVC format (Better or More) | ||
| 2D format for still images JPEG, Bitmap, PNG (Better or More) | ||
| Hard disk delete wizard: Yes | ||
| Weight : 8.1Kg (Better or More) | ||
| CF Defibrillation Safe | ||
| 11 | ENDOSCOPY EQUIPMENT CART NARROW | 1 |
| Accessories: | ||
| 11.1 | STANDARD RAIL F/ENDOSCOPY EQUIPMENT CART | 1 |
| 11.2 | EV3.0 CAMERA HEAD HOLDER | 1 |
| 11.3 | ACCESSORY BASKET | 1 |
| 11.4 | LIFTING HANDLE F/ENDOSCOPY EQUIPM.CART | 1 |
| 11.5 | PROTECT.COVER NARROW F/EQUIPM.CART | 1 |
| 11.6 | CENTRAL BACK PANEL | 1 |
| 11.7 | CROSSBAR NARROW F/EQUIPMENT CART | 1 |
| 11.8 | EXTENSION F/CENTR.MONIT.ARM | 1 |
| 11.9 | HEIGHT-ADJ.CENTR.MONITOR ARM F/CROSSBAR | 1 |
| 11.1 | ISOLATING TRANSFORMER 230V W/ISOGUARD | 1 |
| 11.11 | MAINS CORD | 5 |
| 11.12 | SPECIAL POWER CABLE EXTENSION | 1 |
| 11.13 | MAINS CORD ORANGE TYPE E/F (EURO PLUG) | 1 |
| 11.14 | LATERAL HEIGHT ADJUSTMENT MONITOR ARM | 1 |
| LAPAROSCOPIC BASIC SET | 1 | |
| TROCARS | ||
| Trocar, size 10 mm, color code: green, | ||
| Consisting of: | ||
| 12 | CANNULA COMPLETE W/O TROCAR D:10MM 110MM | 2 |
| 13 | TROCAR TRI-TIP 10MM 110MM | 1 |
| 14 | BLUNT CONICAL OBTURATOR D:10/110MM | 1 |
| Essential Accessories: | ||
| Sealing Cap. Diam 10mm, 20 Pcs | ||
| Valve 10mm, 20 Pcs | ||
| TROCAR 5.5MM/110MM, Color Code: RED | ||
| Consisting of: | ||
| 15 | CANNULA COMPLETE W/O TROCAR 5.5MM110MM | 4 |
| 16 | TROCAR TRI-TIP 5.5MM 110MM | 1 |
| 17 | BLUNT CONICAL OBTURATOR 5.5MM110MM LGTH | 1 |
| 18 | RING WITH INSUFFL.STOPCOCK D:5.5MM | 2 |
| Essential Accessories: | ||
| Sealing Cap. Diam 5.5mm, 20 Pcs | ||
| Valve 5.5mm, 20 Pcs | ||
| 19 | Reducer Sleeve ( 10/5mm) length 165mm | 2 |
| 20 | Veress Insufflation Needle 15cm | 1 |
| 21 | Maryland Dissecting Forceps, rotating, with | 2 |
| Connector pin for unipolar coagulation, size 5 mm, length 31cm, | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| 22 | RIGHT-ANGLE DISSECTOR 5MM 310MM | 2 |
| Connector pin for unipolar coagulation, size 5 mm, length 31cm, | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| 23 | METZENBAUM SCISSORS MEDIUM D:5/310MM | 2 |
| Connector pin for unipolar coagulation, size 5 mm, length 31cm, | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| 24 | PERIT.SCISSORS SERR 5MM 310MM | 2 |
| Connector pin for unipolar coagulation, size 5 mm, length 31cm, | ||
| Single action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| 25 | CLAW GRASPER 10MM 310MM | 2 |
| Connector pin for unipolar coagulation, size 10 mm, length 31cm, | ||
| Single action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| 26 | BULLET NOSE GRASPER 5MM 310MM | 1 |
| Connector pin for unipolar coagulation, size 10 mm, length 31cm, | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| L-HOOK ELECTRODE WITH HANDLE | 4 | |
| Diameter 5mm | ||
| Consists Of: | ||
| CERAMIC ELECTRODE TIP L-HK F/GK372R | ||
| HANDLE F/MONOPOLAR ELECTRODES 5MM | ||
| 29 | DORSEY GRSP FCPS 5MM 310MM | 1 |
| Connector pin for unipolar coagulation, size 10 mm, length 31cm, | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| 30 | SUCTION/IRRIGATION INSTRUMENT 5MM/330MM | 1 |
| SUCTION/IRRIGATION INSTRUMENT 10MM/330MM | 1 | |
| 31 | NEEDLE HOLDER LEFT CURVED 5MM 310MM | 1 |
| 32 | Monopolar HF High frequency cable | 1 |
| Instrument Container | ||
| (5000x Times Autoclavable) with: | ||
| 33 | MIS STORAGE RACK WITH BASKET | 1 |
| 34 | BOTTOM FOR 1/1 CONTAINER HEIGHT:187MM | 1 |
| 35 | FULL-SIZE LID W/RETENTION PLATE BLUE | 1 |
| 36 | Clip Applicator : Medium-Large Diamter 10mm, Length 330mm | 1 |
| 37 | LIGATURE CLIP MED.LARGE 20 MAG.=120 PCS. | |
| 38 | Monopolar Cable | 1 |
| 39 | ENDO FAN RETRACTOR D:10/400MM | 1 |
| 40 | telescope 30 degree 10 mm | 1 |
| 41 | telescope 0 degree 10 mm | 1 |
| 42 | telescope 30 degree 5 mm | 1 |
| 43 | telescope 0 degree 5 mm | 1 |
| 44 | Hemolock applicator all sizes with 1 box of each | 1 |
| 45 | Clip Applicator : LT 200 Diamter 05mm, Length 330mm | 1 |
| 46 | Blunt Tip Fenestrated Bipolar with cabel for laproscopy | 2 |
Item: Laparoscopic tower for emergency surgeries 4k
UNSPSC: General Laparoscopy
Specifications / Requirements:
| 4K LAPARSOCOPY CAMERA COMPLETE TOWER | ||
|---|---|---|
| Sr.# | Description | QUANTITY |
| Department : SURGERY | ||
| Name: 4K LAPARSOCOPY CAMERA COMPLETE TOWER | ||
| Quantity: 01 | ||
| Description | ||
| 1 | Brand | |
| 2 | Make & Model | |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. | |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. | |
| 5 | Original Technical data sheet | |
| TECHNICAL SPECIFICATIONS | ||
| 1 | CAMERA SYSTEM | |
| Full 4K resolution of 4096 x 2160 or better | ||
| With four times the resolution of regular, 4K technology gives sharpness a new (Better or More) | ||
| meaning | ||
| A complete solution from a single source | ||
| Brighter and sharper Endoscopes (Better or More) | ||
| 4K camera head | ||
| Acquisition of FULL 4K resolution from three sensors (Better or More) | ||
| Innovative 4K Camera Controller Integrated processing: | ||
| recorded image and video HD resolution (Better or More) | ||
| Robust fusion light cables (Better or More) | ||
| Bright, color-intense monitors With special tuning (Better or More) | ||
| Full 4K resolution of 4096 x 2160 pixels for live display (Better or More) | ||
| Integrated Special Imaging Modes (SIM): Digital algorithms for easier tissue differentiation | ||
| Storage of high-resolution images and videos on USB storage media User-friendly | ||
| Clinically developed presets for different disciplines | ||
| 4K Camera Control Unit | ||
| comprising: | ||
| Full 4K Camera Controller , handheld remote control | ||
| USB Flash Storage 32 GB or better , HDMI / HDMI cable interlock | ||
| Video and data recorder | ||
| Touch Screen controller | ||
| Built in Recording system, storage of high resolution images and Videos on | ||
| Intergraded special imaging modes for easier tissue differentiation | ||
| Aspect ratio 16: 9 or better | ||
| Special imaging modes | ||
| PIP control via camera head | ||
| control of recording system via camera head button | ||
| 4K Camera Head | ||
| 4K CAMERA HEAD 3x1/3 inch CMOS image sensor or Better | ||
| C-Mount, 3 chip, 2 programmable camera-head buttons, Sensor size: 1/3" (Better or More) | ||
| Progressive Scan, 50 Hz, with 2 freely programmable (Better or More) | ||
| Camera Head buttons, Each button with two functions | ||
| Autoclavable | ||
| Cable length 3.0 m (Better or More) | ||
| Light sensitivity (max. gain) < 0,7 Lux (Better or More) | ||
| Weight of camera head (without cable) min 130 g (or Better ) | ||
| ZOOM LENS F 13-29MM C-Mount, Snap-On lock (Better or More) | ||
| Medical graded 27" LCD MONITOR or better | ||
| LCD MONITOR 4K 27'' or better | ||
| Dual Monitor with one remote display on both simultaneously | ||
| Brilliant visualization experience (Better or More) | ||
| 4K UHD resolution | ||
| Light-intense, anti-glare OptiContrast PanelTM for vibrant and high-contrast images (Better or More) | ||
| FIBER LIGHT CABLE 3.5 MM OR MORE | ||
| IMPORTED TROLLEY | ||
| LED LIGHT SOURCE | ||
| Lamp lifetime 30,000 Hrs and with Integrated Light Cable Test(Better or More) | ||
| Light Intensity Control via Rotation Knob Steps of 5 (5-100%) (Better or More) | ||
| LCD/LED Front Panel | ||
| Activation/ Deactivation by Camera Head Button | ||
| Automatic Light Intensity Control Feature | ||
| Built-in Anti Glare Protection | ||
| Universal Light Cable Adaptor | ||
| Color temperature: 5,665 K(Better or More) | ||
| Light Flux: 2,510 Lumen(Better or More) | ||
| Weight: 8.5KG(Better or More) | ||
| Max Power Consumption: 240W(Better or More) | ||
| FLOW 50 L INSUFFLATOR | ||
| With Integrated Smoke Evacuation and Gas Heating | ||
| Indication Modes: Standard, Bariartic, Pediatric, Cardio (Better or More) | ||
| Display of Gas Consumption in Liter (Better or More) | ||
| Gas Supply Monitoring by Symbols and Acoustic Signals(Better or More) | ||
| Display: 5.7" Colour Touch Screen (Better or More) | ||
| Maximum CO2 Gas Flow: 50L/Min (Better or More) | ||
| Pressure Range: 1-30mmHg (Better or More) | ||
| Maximum Suction Rate: 12L/Min (Better or More) | ||
| Inlet Pressure Range: 2.7-80 Bar (Better or More) | ||
| Weight: 12Kg( or Better ) | ||
| Max Power Consumption: 120VA (Better or More) | ||
| Compressor with air seal technology if avaialble | ||
Item: Laparscopic Basic sets
UNSPSC: Laparoscopes or laparoscopic telescopes
Specifications / Requirements:
| LAPARSOCOPIC BASIC SET | ||
|---|---|---|
| Sr.# | Description | QUANTITY |
| Department : SURGERY | ||
| Name: LAPARSOCOPIC BASIC SET | ||
| Quantity: 02 | ||
| Description | ||
| 1 | Brand | |
| 2 | Make & Model | |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. | |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. | |
| 5 | Original Technical data sheet | |
| TECHNICAL SPECIFICATIONS | ||
| LAPAROSCOPIC BASIC SET | 1 | |
| TROCARS | ||
| Trocar, size 10 mm, color code: green, | ||
| Consisting of: | ||
| CANNULA COMPLETE W/O TROCAR D:10MM 110MM | 2 | |
| TROCAR TRI-TIP 10MM 110MM | 1 | |
| BLUNT CONICAL OBTURATOR D:10/110MM | 1 | |
| Essential Accessories: | ||
| Sealing Cap. Diam 10mm | 20 | |
| Valve 10mm | 20 | |
| TROCAR 5.5MM/110MM, Color Code: RED | ||
| Consisting of: | ||
| CANNULA COMPLETE W/O TROCAR 5.5MM110MM | 4 | |
| TROCAR TRI-TIP 5.5MM 110MM | 1 | |
| BLUNT CONICAL OBTURATOR 5.5MM110MM LGTH | 1 | |
| RING WITH INSUFFL.STOPCOCK D:5.5MM | 2 | |
| Essential Accessories: | ||
| Sealing Cap. Diam 5.5mm, | 20 | |
| Valve 5.5mm, | 20 | |
| Reducer Sleeve ( 10/5mm) length 165mm | 2 | |
| Veress Insufflation Needle 15cm | 1 | |
| Maryland Dissecting Forceps, rotating, with | 2 | |
| Connector pin for unipolar coagulation, size 5 mm, length 31cm, | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| RIGHT-ANGLE DISSECTOR 5MM 310MM | 2 | |
| Connector pin for unipolar coagulation, size 5 mm, length 31cm, | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| METZENBAUM SCISSORS MEDIUM D:5/310MM | 2 | |
| Connector pin for unipolar coagulation, size 5 mm, length 31cm, | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| PERIT.SCISSORS SERR 5MM 310MM | 2 | |
| Connector pin for unipolar coagulation, size 5 mm, length 31cm, | ||
| Single action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| CLAW GRASPER 10MM 310MM | 2 | |
| Connector pin for unipolar coagulation, size 10 mm, length 31cm, | ||
| Single action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| BULLET NOSE GRASPER 5MM 310MM | 1 | |
| Connector pin for unipolar coagulation, size 10 mm, length 31cm, | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| L-HOOK ELECTRODE WITH HANDLE | 4 | |
| Diameter 5mm | ||
| Connector pin for unipolar coagulation, size 10 mm, length 31cm, | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| SUCTION/IRRIGATION INSTRUMENT 5MM/330MM | 1 | |
| SUCTION/IRRIGATION INSTRUMENT 10MM/330MM | 1 | |
| NEEDLE HOLDER LEFT CURVED 5MM 310MM | 1 | |
| Monopolar HF High frequency cable | 3 | |
| Instrument Container | ||
| (5000x Times Autoclavable) with: | ||
| MIS STORAGE RACK WITH BASKET | 1 | |
| BOTTOM FOR 1/1 CONTAINER HEIGHT:187MM | 1 | |
| FULL-SIZE LID W/RETENTION PLATE BLUE | 1 | |
| Clip Applicator : 10mm, Length 330mm for LT300 AND LT400 | 1 EACH | |
| LIGATURE CLIP MED.LARGE 20 MAG | 10 | |
| Monopolar Cable | 1 | |
| telescope 30 degree 10 mm | 1 | |
| telescope 0 degree 10 mm | 1 | |
| telescope 30 degree 5 mm | 1 | |
| telescope 0 degree 5 mm | 1 | |
| Hemolock applicator all sizes with 1 box of each | 1 | |
| Bipolar Sheares laparoscopic with cable | 1 | |
Item: Vascular Clamp Set
UNSPSC: Surgical clamp or forcep or surgical ligator accessories
Specifications / Requirements:
| Vascular clamp Set | |||||
|---|---|---|---|---|---|
| Sr.# | Description | ||||
| Department : General Surgery | |||||
| Name: Vascular clamp Set | |||||
| Quantity: 02 | |||||
| Description | |||||
| 1 | Brand | ||||
| 2 | Make & Model | ||||
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. | ||||
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. | ||||
| 5 | Original Technical data sheet | ||||
| TECHNICAL SPECIFICATIONS | |||||
| 1 | Clamp Name | Type | Jaw Configuration | Length (cm) | Quantity |
| DeBakey Atraumatic Vascular Clamp | Occlusion | Straight | 16–18 | 2 | |
| DeBakey Atraumatic Vascular Clamp | Occlusion | Angled (45°) | 16–18 | 2 | |
| DeBakey Atraumatic Vascular Clamp | Occlusion | Straight | 20–24 | 2 | |
| DeBakey Atraumatic Vascular Clamp | Occlusion | Angled | 20–24 | 2 | |
| Satinsky Vascular Clamp | Partial occlusion | Angled | 20–24 | 2 | |
| Satinsky Vascular Clamp | Partial occlusion | Straight | 18–22 | 2 | |
| Cooley Vascular Clamp | Occlusion | Angled | 18–20 | 2 | |
| Cooley Vascular Clamp | Occlusion | Straight | 18–20 | 2 | |
| Bulldog Clamp | Cross-action | Straight | 3–5 | 4 | |
| Bulldog Clamp | Cross-action | Angled | 3–5 | 4 | |
| Bulldog Clamp | Cross-action | Large | 5–7 | 4 | |
| Microvascular Clamp | Occlusion | Straight | 2–4 | 4 | |
| Microvascular Clamp | Occlusion | Curved | 2–4 | 4 | |
| Carotid Clamp | Occlusion | Angled | 14–16 | 2 | |
| Carotid Clamp | Occlusion | Straight | 14–16 | 2 | |
| Aortic Cross Clamp | Occlusion | Straight | 24–30 | 2 | |
| Aortic Cross Clamp | Occlusion | Angled | 24–30 | 2 | |
| Micro VASCULAR INSTRUMENT SHOULD ALSO BE QUOTED ALONG WITH OFFER | 1 | ||||
| TECHNICAL SPECIFICATIONS (Applicable to all clamps) | |||||
| Specification | |||||
| Material | Surgical stainless steel AISI 420 / ISO 7153-1 compliant | ||||
| Finish | Satin / matte finish | ||||
| Sterilization | Autoclave compatible (134°C or more) | ||||
| Joint | Box joint | ||||
| Serrations | Atraumatic DeBakey pattern | ||||
| Corrosion resistance | Passivated | ||||
| Reusable | Yes | ||||
Item: New Cautery Machines
UNSPSC: Diathermy units
Specifications / Requirements:
| Cautery Unit | ||
|---|---|---|
| Sr.# | Description | Quantity |
| Department : General Surgery | ||
| Name: Cautery Unit | ||
| Quantity: 03 | ||
| Description | ||
| 1 | Brand | |
| 2 | Make & Model | |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. | |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. | |
| 5 | Original Technical data sheet | |
| TECHNICAL SPECIFICATIONS | ||
| 1 | Universal electrosurgical platform with microprocessors of the latest generation providing energies adapted in real time to the evolution of the tissues (Better or More) | |
| 300 W complete electrosurgical unit, with a wide range of monopolar and bipolar effects (Better or More) | ||
| Specific waveforms dedicated to endoscopic polypectomy (Better or More) | ||
| A unique all-in-one system, which can seal, dissect and cut, (Better or More) | ||
| Memorization of the surgeon’s personal adjustments minimum 99 programs (Better or More) | ||
| 3 High Frequency outlets: 1 monopolar, 1 bipolar and 1 vessel sealing (Better or More) | ||
| Saline cut under saline irrigation wit Plasma Edge technology (Better or More) | ||
| Recognition of the vessel sealing instruments | ||
| Reusable cutting and sealing forceps (04 In Number) | 4 | |
| Monopolar Cuts: 200 - 300W or better in Endo, Blend and Forced Pure cut mode (Better or More) | ||
| Monopolar Cuts under liquid: 300W or better for transurethral resection of prostate (TURP) or the bladder (TURB) etc. (Better or More) | ||
| Monopolar Coagulations: 100-170W or better in Fulgration, Dessication and Soft Coagulation mode(Better or More) | ||
| Bipolar Coagulations: 100-170W or better in Soft coagulation, forced coagulation and saline plasma coagulation mode (Better or More) | ||
| Vessel Sealing System: 150W or better with sealing of vascular walls upto 7mm of diameter with reusable vessel sealing forceps (Better or More) | ||
| User interface keyboard with HF Power digital display (Better or More) | ||
| Adjustments: 1W / step for power < 50W and 5W / step for power > 50W (Better or More) | ||
| Storage of the setting parameters i.e. cut and coagulation modes, power adjustments (Better or More) | ||
| Twin footswitches for monopolar and bipolar cuts and coagulations | ||
| Single footswitch for bipolar coagulations and vessel sealing | ||
| Required ACCESSORIES | ||
| Reusebale foot plate | 5 | |
| Cautery leads | 50 | |
| Mount Trolley | 1 | |
Item: VESSEL SEALER GENERATOR
UNSPSC: Endoscopic vessel sealing and cutting attachments
Specifications / Requirements:
| VESSEL SEALER GENERATOR | ||
|---|---|---|
| Sr.# | Description | Quantity |
| Department : GENERAL SURGERY DEPARTMENT | ||
| Name: VESSEL SEALER GENERATOR | ||
| Quantity: 01 | ||
| Description | ||
| 1 | Brand | |
| 2 | Make & Model | |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. | |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. | |
| 5 | Original Technical data sheet | |
| TECHNICAL SPECIFICATIONS | ||
| 1 | Vessel Sealer Generator | |
| A multipurpose vessel sealing instrument (advanced bipolar) in laparoscopic and open | 1 | |
| surgery within the surgical fields of General surgery & Urology, Thoracic & Gynae | ||
| Consistent sealing quality from distal to proximal tip | ||
| Tip First Closure | ||
| One Seal Confidence through Uniform Compression and | ||
| Tip First Closure Concept. Only One Energy Activation Required | ||
| Hand click single energy activation | ||
| 80 Deg Jaw Articulation: (Better or More) | ||
| Allows simplified navigation in challenging anatomy | ||
| Max Voltage Ranges: 100V-240V (6.7A-2.8A) (Better or More) | ||
| HF Operating Frequency: 460 kHz ± 1 %, Quasi-Sinus (Better or More) | ||
| Seal Vessel upto 7mm diameter (Better or More) | ||
| Thermal Spread minimal thermal spread | ||
| · Feedback system Real Time tissue impedance monitoring | ||
| · Advance Vessel sealing instrument | ||
| Hand Instruments | ||
| 2 | Vessel Sealer Instrument - Maryland Tip - LAP Surgery | 1 |
| Diameter 5mm - Shaft Length 360mm / 36cm (Better or More) | ||
| 3 | Vessel Sealer Instrument - Straight Tip - LAP Surgery | 1 |
| Diameter 5mm - Shaft Length 240mm / 24cm (Better or More) | ||
| 4 | Vessel Sealer Instrument - Maryland Tip - Open Surgery | 1 |
| Diameter 5mm - Shaft Length 170mm / 17cm (Better or More) | ||
Item: splits Thornas
UNSPSC: Orthopedic splint systems
Specifications / Requirements:
| THOMAS SPLINT ADULT YOUNG LARGE SIZE | ||
|---|---|---|
| Sr.# | Description | Quantity |
| Department : General Surgery | ||
| Name: THOMAS SPLINT ADULT YOUNG LARGE SIZE | ||
| Quantity: 10 | ||
| Description | ||
| 1 | Brand | |
| 2 | Make & Model | |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. | |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. | |
| 5 | Original Technical data sheet | |
| TECHNICAL SPECIFICATIONS | ||
| 1 | Thomas splint frame | 1 |
| Thigh ring | 1 | |
| Support slings | 3–5 | |
| Traction windlass | 1 | |
| Padding cover | 1 | |
| Traction straps | 1 set | |
| Supply of Thomas Splint (Orthopedic Traction Splint) complete with accessories, suitable for immobilization and traction of lower limb fractures, especially femoral shaft fractures. | ||
Item: Self Retaining Retractors Omni-track
UNSPSC: Surgical retractors
Specifications / Requirements:
| Self Retaining Retractor Omni Track | ||
|---|---|---|
| Sr.# | Description | Quantity |
| Department : General Surgery | ||
| Name: Self Retaining Retractor Omni Track | ||
| Quantity: 02 | ||
| Description | ||
| 1 | Brand | |
| 2 | Make & Model | |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. | |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. | |
| 5 | Original Technical data sheet | |
| TECHNICAL SPECIFICATIONS | ||
| Typical sets include sterile field posts, extension arms, blade holders, and multiple blade types. | ||
| Supply, installation (where applicable), and commissioning of Self-Retaining Abdominal Retractor System, Omni-Tract type or equivalent, complete with frame, articulated arms, and interchangeable blades, suitable for open abdominal surgery. | ||
| 1 | SET SHOULD HAVE COMPLETE EQUIPMENT | |
| Sterile field post | 1 | |
| Cross bar | 1 | |
| Wishbone frame arms | 2 | |
| Extension arms | 2 | |
| Blade clamps | 6 | |
| Deaver blades | 2 | |
| Harrington blades | 2 | |
| Mayo blades | 2 | |
| Splanchnic blades | 2 | |
| Malleable blades | 2 | |
| Renal vein blades | 2 | |
| Storage container | 1 | |
Item: Ligature hand pieces (Open)
UNSPSC: Surgical instrument holders or positioners
Specifications / Requirements:
| Ligasure Hand Pieces Open | |
|---|---|
| Sr.# | Description |
| Department : General Surgery | |
| Name: Ligasure Hand Pieces Open | |
| Quantity: 50 | |
| Description | |
| 1 | Brand |
| 2 | Make & Model |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. |
| 5 | Original Technical data sheet |
| TECHNICAL SPECIFICATIONS | |
| a | LigaSure Precise (LP1050) X 5UNITS |
| b | LF1212 Exact → precision surgery X 27 UNITS |
| c | LF1923 Maryland → major abdominal surgery X 15 UNITS |
| d | LigaSure Impact Curved Jaw (LF4418) X 3 UNITS |
| Supply of Advanced Vessel Sealing Hand Instruments, compatible with already available modern electrosurgical vessel sealing generator Medtronic Valleylab LS-10 , suitable for open surgical procedures including general, hepatobiliary, colorectal, thyroid, and major abdominal surgery. | |
Item: Ligature hand pieces ( Laproscopic)
UNSPSC: Surgical instrument holders or positioners
Specifications / Requirements:
| Ligasure Hand Pieces Laparoscopic | |||
|---|---|---|---|
| Sr.# | Description | Compliance status Yes/No | Page # |
| Department : General Surgery | |||
| Name: Ligasure Hand Pieces Laparoscopic | |||
| Quantity: 50 | |||
| Description | |||
| 1 | Brand | ||
| 2 | Make & Model | ||
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. | ||
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. | ||
| 5 | Original Technical data sheet | ||
| TECHNICAL SPECIFICATIONS | |||
| a | LF 1937 MARYLAND 37CM X 35 UNITS | ||
| b | LF 1944 MARYLAND 44CM X 5 UNITS | ||
| c | LF 1637 BLUNT TIP 37CM X 5 UNITS | ||
| d | LF 1837 BLUNT TIP 37CM X 5 UNITS | ||
| Supply of Advanced Laparoscopic Vessel Sealing Instruments, compatible with already available modern electrosurgical vessel sealing generator Medtronic Valleylab LS-10 , suitable for laparoscopic and minimally invasive surgical procedures | |||
Item: Portable Ultrasound
UNSPSC: Ultrasound
Specifications / Requirements:
| Portable Ultrasound | |
|---|---|
| Sr.# | Description |
| Department : General Surgery | |
| Name: Portable Ultrasound | |
| Quantity: 01 | |
| Description | |
| 1 | Brand |
| 2 | Make & Model |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. |
| 5 | Original Technical data sheet |
| TECHNICAL SPECIFICATIONS | |
| 1 | The supplier shall provide a portable ultrasound imaging system, complete with Convex, Linear and endocavity probes one each, display unit, software, accessories, and necessary hardware. (Better or More) |
| • Display: 15” LCD Monitor with resolution of 1920 x 1080. | |
| • Three Probe Connectors. | |
| • Imaging Modes: B, M, Color M, CFM, PDI/DPDI, PWD, CWD | |
| • Scan Method:Convex, Linear, Endocavity & Phased Array Sector | |
| • System Frequency Range: 1 – 16 MHz. | |
| • Tissue Specific Index. | |
| • Scanning Depth: 38cm or more | |
| • Frame rate: 400 fps or more. | |
| • Transducer Element : 128 or more. | |
| • M-Mode Speed: 5 levels or more | |
| • TGC: 8 segment slider controls or more | |
| • Dynamic range: 300dB or more. | |
| • Auto IMT measurement. | |
| • Auto trace in real time mode. | |
| • Wide View Scan for Convex & Linear Probe. | |
| • Compounding Imaging. | |
| • Auto Optimization. | |
| • Simultaneous mode (Triplex). | |
| • Data management system with built-in 500GB Hard Disk Drive. | |
| • Alphanumeric Keyboard with Trackball. | |
| • 3 USB Ports, 1 Ethernet Port, HDMI. | |
| • Built-in Tutorial to guide scanning. | |
| • Built-in Rechargeable Battery with 90-minutes backup or more | |
| • Measurement for Obstetrics, Small parts, Gynecology, Vascular, Abdominal, Cardiac, Urology, Pediatrics. | |
| • 1 – 7 MHz Multi Frequency Convex Probe. | |
| • 4 – 16 MHz Multi Frequency Linear Probe. | |
| • 4 – 14 Multi Frequency TVS/Endocavity Probe. | |
| • Local Made Trolley. | |
| • 4 – 16 MHz Multi Frequency Hockey type Intraoperative Probe. | |
Item: Nerve stimulator
UNSPSC: Surgical nerve stimulators
Specifications / Requirements:
| Nerve Stimulator | |
|---|---|
| Sr.# | Description |
| Department : General Surgery | |
| Name: Nerve Stimulator | |
| Quantity: 01 | |
| Description | |
| 1 | Brand |
| 2 | Make & Model |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. |
| 5 | Original Technical data sheet |
| TECHNICAL SPECIFICATIONS | |
| 1 | The supplier shall provide a portable nerve stimulator system, capable of accurate nerve identification and stimulation during surgical procedures. Especially For Thyroid and Parotid. |
| The system shall include: | |
| Portable nerve stimulator unit | |
| Stimulation probes | |
| Patient cable and electrode system | |
| Footswitch or hand activation control | |
| Rechargeable power system | |
| Required accessories | |
Item: Blood warmer
UNSPSC: Blood warming or transfusion systems
Specifications / Requirements:
| Blood Warmer | |
|---|---|
| Sr.# | Description |
| Department: General Surgery | |
| Name: Blood Warmer | |
| Quantity: 02 | |
| Description | |
| 1 | Brand |
| 2 | Make & Model |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. |
| 5 | Original Technical data sheet |
| TECHNICAL SPECIFICATIONS | |
| 1 | 1) Control unit |
| LED display indicates current and set temperatures | |
| Separate control buttons (Better or More) | |
| 2 operating modes: | |
| Manual mode: the temperature can be set between 34°С and 42°С with 0.1°С increments; (Better or More) | |
| Auto mode: temperature is maintained at 36.6°С (Better or More) | |
| Audible and visual alarms, self-diagnostics at the power-up and during operation | |
| 2) Two external heat exchangers | |
| Open System. Any standard IV lines can be used, incl. pediatric (optional) | |
| The heat exchanger can be placed very close to the injection site, providing minimum distance from the heat exchanger to the patient | |
| Max. flow rate - 2 000 ml/h (Better or More) | |
| Duralumin heating plate: high thermal conductivity, durability and resistance to mechanical stress | |
| 3) Mounting | |
| Can be mounted on an IV stand or rail with the diameter of 15-55 mm (Better or More) | |
| Secure non-slip mounting on a stand | |
Item: Choledochoscope
UNSPSC: Diagnosis of choledochal cyst
Specifications / Requirements:
| Choledochoscope | |
|---|---|
| Sr.# | Description |
| Department : General Surgery | |
| Name: Choledochoscope | |
| Quantity: 01 | |
| Description | |
| 1 | Brand |
| 2 | Make & Model |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. |
| 5 | Original Technical data sheet |
| TECHNICAL SPECIFICATIONS | |
| 1 | Flexible digital choledochoscope for laparoscopic common bile duct exploration |
| outer diameter 3–5 mm or more | |
| working channel ≥1.2 mm | |
| working length ≥450 mm | |
| bidirectional tip deflection ≥160° | |
| CMOS digital imaging or better | |
| compatible with standard laparoscopic camera and light source, autoclavable | |
| Choledochoscope -Visualization | |
| Camera control unit -Image processing | |
| Light source -Illumination | |
| Monitor -Visualization | |
| Irrigation system -flue bile duct | |
| Stone retrieval basket | |
| Essential Accessory with equipment | |
| Dormia basket (Three) | |
| Balloon catheter (Three) | |
| Irrigation tubing (One) | |
| Light cable (One) | |
| Camera system (One) | |
| Sterilization tray (One) | |
Item: Dermatome with accessories
UNSPSC: Surgical dermatomes or dermabraders or dermameshers
Specifications / Requirements:
| Dermatome with accessories | ||
|---|---|---|
| Sr.# | Description | Quantity |
| Department : General Surgery | ||
| Name: Dermatome with accessories | ||
| Quantity: 01 | ||
| Description | ||
| 1 | Brand | |
| 2 | Make & Model | |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. | |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. | |
| 5 | Original Technical data sheet | |
| TECHNICAL SPECIFICATIONS | ||
| 1 | DERMATOME WITH 25 BLADES , WITH SKIN MESHER MACHINE WITH DERMA CARRIERS 1-1.5 25 PIECES | |
| Dermatome skin graft harvesting system complete with power supply, sterilization case, width plates, and 25 sterile disposable dermatome blades . System shall include Skin Graft Mesher machine with ratchet handle and cutters and Dermacarriers 1.5:1 expansion ratio (or Better) (25 pieces). Dermatome shall provide adjustable cutting thickness 0–0.76 mm (or Better), stainless steel construction, autoclavable components. (Better or more) | ||
| Dermatome handpiece (One) | 1 | |
| Power supply unit (One) | 1 | |
| Autoclave sterilization case (One) | 1 | |
| Width plates (1″, 2″, 3″, 4″) or more (Five) | 5 | |
| Dermatome screwdriver (One) | 1 | |
| Dermatome blades (25 Pieces) | 25 pieces | |
| Skin Graft Mesher machine (One) | 1 | |
| Mesher ratchet handle (One) | 1 | |
| Dermacarriers 1.5:1 ratio or better (25 Pieces) | 25 pieces | |
Item: Flexible sigmoidoscope
UNSPSC: Sigmoidoscopes
Specifications / Requirements:
| Flexible Sigmoidoscope | |
|---|---|
| Sr.# | Description |
| Department : General Surgery | |
| Name: Flexible Sigmoidoscope | |
| Quantity: 01 | |
| Description | |
| 1 | Brand |
| 2 | Make & Model |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. |
| 7 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. |
| 10 | Original Technical data sheet |
| TECHNICAL SPECIFICATIONS | |
| Flexible video sigmoidoscope with working length 600–1030 mm, insertion tube diameter ≤13 mm, working channel ≥3.2 mm, CMOS digital imaging, LED or Xenon illumination, compatible with standard endoscopy video processor, autoclavable compatible with high-level disinfection. Better or more | |
| Accessory | |
| Biopsy forceps for Tissue Sampling | |
| Polypectomy snare for Polyp Removal | |
| Cleaning brush for Cleaning working channel | |
| Leak tester for Leak detection | |
| Valve set for Air/water control | |
| Type (Flexible video sigmoidoscope) | |
| Working length 600–700 mm (Better or More) | |
| Insertion tube diameter 11–13 mm (Better or More) | |
| Distal tip diameter 11–13 mm (Better or More) | |
| Working channel diameter ≥ 3.2 mm (Better or More) | |
| Field of view 140°–170° (Better or More) | |
| Depth of field 3–100 mm (Better or More) | |
| Angulation Up/down ≥180°, Left/right ≥160° (Better or More) | |
| Imaging CMOS digital video chip (Better or More) | |
| Light source LED | |
| Compatibility Standard endoscopy tower | |
| Sterilization High-level disinfection (Better or More) | |
Item: Laser machine with accessories
UNSPSC: Surgical lasers
Specifications / Requirements:
| LASER MACHINE WITH ACCESSORIES | __EMPTY_1 | __EMPTY_2 | |
|---|---|---|---|
| Description | Compliance status Yes/No | Page # | |
| Department : GENERAL SURGERY DEPARTMENT(ITEM # 16) | |||
| Name: LASER MACHINE WITH ACCESSORIES | |||
| Quantity: 01 | |||
| Description | |||
| 1 | Brand | ||
| 2 | Make & Model | ||
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. | ||
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. | ||
| 5 | Original Technical data sheet | ||
| TECHNICAL SPECIFICATIONS | |||
| Diode laser should be capable of cutting, coagulation and tissue vaporization in Proctoology for Hemorrhoids, Fistula, Pilonidal Sinus and Fissureas as well as in Phlebology (Endo Venous Laser Therapy) to treat the vericose veins (or more ). | |||
| The Laser should have high-end Diode and optical system with Power of 15W wavelength 980nm & 15W wavelength 1470nm (Better or More). Variety of flexible fibers should be available to give a unique application scope in contact phlebology and proctology. (Better or more) | |||
| Tehnical Data | |||
| Pre-Programmed for EVLT, Hemmorrhoid Grade 2, 3 & 4, Fistula, Pilonidal Sinus and Laser Sphincterotomy. The machine should be capable of using the Reusable Hemorrhoid Fiber after sterilization. (Better or More) | |||
| Unlimited customized programmes / user therapies | |||
| Laser type: Diode, Semiconductor (Better or More) | |||
| Wavelength: Dual 980nm & 1470 ± 15 nm (Better or More) | |||
| Max power: 15+15= 30W (Better or More) | |||
| USB Smart Key: For storage of unlimited patient data with energy storage | |||
| Aiming beam: 630÷690 nm/ 1.4mW max (Better or More) | |||
| Operating mode: continuous or modulated | |||
| Pulse time: 50 µs – 10 s (Better or More) | |||
| Beam delivery: Fiber optic with SMA 905 connector | |||
| Optical fiber connector: SMA 905, accepts optical fibers having a core diameter from 400µm up to 800µm, NA=0.22–0.48 (Better or More) | |||
| Beam emission initiation: Footswitch (Better or More) | |||
| Controller: Microprocessor | |||
| Display: Minimum 7” TFT with touch panel (Better or More) | |||
| Visual and Acoustic Signal: There should be visual signal for energy delivered and acoustic signal for time. (Better or More) | |||
| Cooling system: Internal, air and thermoelectric cooling | |||
| Power supply of the laser: DC 24V 200W min. from the separate AC/DC power adapter; Medical Approval EN60601-1 Class I | |||
| Power supply of AC adapter: single phase 240 VAC; 50 Hz; 4.0A (Better or More) | |||
| Upgradeable to 405nm or better wavelength for detection of inflamation zone and bacterial infection as well as 635nm or better wavelength for Pain Management (LLLT, Biomodulation) better or more | |||
| Safety Features: During system startup, the processor should execute the test program, and during the further action automatically control the operating parameters of the entire device. (Better or More) | |||
| Emergency Laser Stop: Should have Emergency stop button which may immediately cut the power of the laser. (Better or More) | |||
| Remote Interlock Connector: Laser should not run without a proper connection of a remote door lock (Interlock). (Better or More) | |||
| Fiber Detection: Should have Built-in optic detection system of the fiber to prevent the emission of radiation, if it is not properly connected fiber. (Better or More) | |||
| Footswitch Detection: Sensor should not allow to run the device or emits the radiation, if footswitch it is not properly connected. (Better or More) | |||
| Warning / Alarm Signals: During emission of laser radiation, device should emits a warning beep. In case of irregularities the device should emit an intermittent beep. (Better or More) | |||
| Standard Accessories: | |||
| Transportation case | |||
| Stand of the laser housing | |||
| USB Smart Key | |||
| Interlock connection to be connected with door. Device should be turned off if door opens. | |||
| Footswitch | |||
| AC adapter | |||
| The power cord to the AC | |||
| Warning labels | |||
| 4 pieces of Safety glasses for 980/1470 nm (or better) | |||
| System shall include complete accessories and surgical fibers including radial, conical, and bare fibers (each type with 10 pieces) | |||
| 2 Handpiece for microsurgery applications (reusable) | |||
| 2 Proctology cannula (reusable) | |||
Item: Laparoscopic bariatric sets
UNSPSC: Laparoscopes or laparoscopic telescopes
Specifications / Requirements:
| LAPAROSCOPIC BARIATRIC SET | ||
|---|---|---|
| Sr.# | Description | Quantity |
| Department : GENERAL SURGERY | ||
| Name: LAPAROSCOPIC BARIATRIC SET | ||
| Quantity: 01 | ||
| Description | ||
| 1 | Brand | |
| 2 | Make & Model | |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. | |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. | |
| 5 | Original Technical data sheet | |
| TECHNICAL SPECIFICATIONS | ||
| LAPAROSCOPIC BARIATRIC SET | ||
| 1 | TELESCOPE 10MM 0DEG LENGTH 420MM OR MORE | 1 |
| 2 | TELESCOPE 10MM 30DEG LENGTH 420MM OR MORE | 1 |
| TROCARS | ||
| Trocar, size 10 MM (Two) , 12MM (Two) EACH SEPARATE | ||
| Consisting of: | ||
| 5 | CANNULA COMPLETE W/O TROCAR D:10MM LENGTH 150MM (or Better) | 2 |
| 6 | TROCAR TRI-TIP 12MM LENGTH 150MM (or Better ) | 1 |
| 7 | BLUNT CONICAL OBTURATOR D:12 LENGTH150MM ( or Better ) | 1 |
| Essential Accessories: | ||
| 8 | Sealing Cap. Diam 10mm, 20 Pcs | |
| 9 | Valve 10mm, 20 Pcs | |
| TROCARS 5.5MM LENGTH 150MM | ||
| Consisting of: | ||
| 10 | CANNULA COMPLETE W/O TROCAR 5.5MM LENGTH 150MM ( or Better ) | 2 |
| 11 | BLUNT CONICAL OBTURATOR 5.5MM LENGTH 150MM ( or Better ) | 2 |
| Essential Accessories: | ||
| 12 | Sealing Cap. Diam 5.5mm, 20 Pcs | |
| 13 | Valve 5.5mm, 20 Pcs | |
| 14 | Reducer Sleeve ( 12/5mm) length 165mm | 1 |
| 15 | Veress Insufflation Needle 15cm OR MORE | 1 |
| 16 | MARYLAND DISSECTING FORCEP | 1 |
| Connector pin for unipolar coagulation, size 5 mm, length 42cm, ( or Better ) | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| 17 | METZENBAUM SCISSORS MINI | 1 |
| Connector pin for unipolar coagulation, size 5 mm, length 42cm, ( or Better ) | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| 18 | METZENBAUM SCISSORS | 1 |
| Connector pin for unipolar coagulation, size 5 mm, length 42cm, ( or Better ) | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| 19 | Atraumatic fixation and dissecting forceps | 1 |
| Connector pin for unipolar coagulation, size 5 mm, length 42cm, ( or Better ) | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| 20 | Universal grasping forceps | 1 |
| Connector pin for unipolar coagulation, size 5 mm, length 42cm, ( or Better ) | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, with ratchet | ||
| 21 | Bowel Grasper | 1 |
| Connector pin for unipolar coagulation, size 5 mm, length 42cm, ( or Better ) | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, with ratchet | ||
| 22 | Grasping forceps, 2 x 4 teet | 1 |
| Connector pin for unipolar coagulation, size 5 mm, length 42cm, ( or Better ) | ||
| Single action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, with ratchet | ||
| 23 | BULLET NOSE GRASPER 5MM | 1 |
| Connector pin for unipolar coagulation, size 5 mm, length 42cm, ( or Better ) | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| L-HOOK ELECTRODE WITH HANDLE | 2 | |
| Diameter 5mm | ||
| Consists Of: | ||
| CERAMIC ELECTRODE TIP L-Hook | ||
| HANDLE F/MONOPOLAR ELECTRODES 5MM LENGTH 400MM | ||
| DORSEY GASPER FORCEP | 1 | |
| Connector pin for unipolar coagulation, size 5 mm, length 42cm, ( or Better ) | ||
| double action jaws | ||
| Consisting of: | ||
| Forcep insert, Outer Tube, insulated , Plastic Handle, without ratchet | ||
| SUCTION/IRRIGATION INSTRUMENT 5MM/420MM , 10mm/420mm (One each) OR BETTER | 1+1 | |
| NEEDLE HOLDER LEFT CURVE LENGTH 37CM OR BETTER | 1 | |
| Monopolar HF High frequency cable | 1 | |
| Bariatric instrument Container (One) consisting of following | 1 | |
| (5000x Times Autoclavable) with: | ||
| MIS STORAGE RACK WITH BASKET | 1 | |
| BOTTOM FOR 1/1 CONTAINER HEIGHT | 1 | |
| FULL-SIZE LID W/RETENTION PLATE | 1 | |
| Scope Tray: | ||
| Tray for Two Telescopes | 1 | |
| Clip Applicator : Medium-Large Diamter 10mm, Length 420mm OR BETTER | 1 | |
| LIGATURE CLIP MED.LARGE 20 MAG.=120 PCS. | ||
| ENDO FAN RETRACTOR D:10/400MM OR BETTER | 1 | |
| Bipolar forcep fenestrated blunt tip | 2 | |
Item: Sterilization solution sprayer
UNSPSC: Air sterilizer
Specifications / Requirements:
| Sterlization solution sprayer | |
|---|---|
| Sr.# | Description |
| Department : General Surgery | |
| Name: Sterlization solution sprayer | |
| Quantity: 04 | |
| Description | |
| 1 | Brand |
| 2 | Make & Model |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. |
| 5 | Original Technical data sheet |
| TECHNICAL SPECIFICATIONS | |
| Supply OT sterilization solution sprayer machine capable of ULV fogging or hydrogen peroxide fogging, with particle size 5–50 microns (or better), tank capacity ≥5 liters, coverage ≥500 m², adjustable flow rate, and portable design. (better or more).Unit shall operate on 220–240V AC power | |
| Fogging motor unit: Generates aerosol | |
| Solution tank:Holds disinfectant | |
| Spray nozzle: Produces fine mist | |
| Flow regulator: Controls spray rate | |
| Power unit: Provides electrical power | |
| Control panel Adjusts operation | |
| Compatible Disinfectant Solutions | |
| Disinfectant : Concentration | |
| Hydrogen peroxide: 5–35% (better or more) | |
| Sodium hypochlorite: 0.1–1% (better or more) | |
| Peracetic acid: 0.2–0.35% (better or more) | |
| Quaternary ammonium: Standard solution | |
Item: Suction machine Heavy duty
UNSPSC: Mobile medical services suction antichoke devices
Specifications / Requirements:
| Heavy Duty Suction Machine | |
|---|---|
| Sr.# | Description |
| Department : General Surgery | |
| Name: Heavy Duty Suction Machine | |
| Quantity: 04 | |
| Description | |
| 1 | Brand |
| 2 | Make & Model |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. |
| 5 | Original Technical data sheet |
| TECHNICAL SPECIFICATIONS | |
| Supply heavy-duty electric surgical suction machine capable of continuous operation with suction capacity ≥50 L/min and vacuum ≥700 mmHg. Unit shall include double autoclavable collection jars, overflow protection system, bacterial filters, vacuum regulator, gauge display, footswitch, and trolley. | |
Item: Laparoscopic stapling guns
UNSPSC: Medical powered stapling system or accessories for internal use
Specifications / Requirements:
| Laparsopic Stapling Gun | |
|---|---|
| Sr.# | Description |
| Department : General Surgery | |
| Name: Laparsopic Stapling Gun | |
| Quantity: 08 | |
| Description | |
| 1 | Brand |
| 2 | Make & Model |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. |
| 5 | Original Technical data sheet |
| TECHNICAL SPECIFICATIONS | |
| Supply laparoscopic linear cutting stapler with articulating shaft, 45 cm length (better or more) | |
| Compatible with 12 mm trocar | |
| Reload capability of cartridges of Minimum 60 mm length (better or more) in multiple staple heights (white or blue or gold or green or black or Purple). | |
| Provision of 60mm purple cartidges 50 in number | |
| Provision of all other essential accessories if any | |
Item: Open stapling guns
UNSPSC: Medical powered stapling system or accessories for internal use
Specifications / Requirements:
| Open Stapling Gun | |
|---|---|
| Sr.# | Description |
| Department: General Surgery | |
| Name: Open Stapling Gun | |
| Quantity: 30 | |
| Description | |
| 1 | Brand |
| 2 | Make & Model |
| 3 | Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification. |
| 4 | Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing PPM as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm. |
| 5 | Original Technical data sheet |
| TECHNICAL SPECIFICATIONS | |
| Supply open surgical staplers including linear cutting staplers 75mm /80mm ( 15 in number), CONTOUR staplers (5 in number), circular staplers 21 mm 25mm 28mm 30mm (2 EACH) , with compatible reload cartridges where required. Staplers shall use titanium staples, sterile disposable cartridges, and CE and ISO certified. | |
| Supply open surgical staplers including linear cutting staplers 75mm or 80mm ( 15 in number), CONTOUR staplers (5 in number), circular staplers 21 mm 25mm 28mm, 31mm, 33mm (2 EACH) , with compatible reload cartridges where required. Staplers shall use titanium staples, sterile disposable cartridges. | |
For Individual Items
| # | Item Title | Quantity | Unit Price (PKR) | Total Price (PKR) | Delivery Location | Delivery Period / Year | Country of Origin |
|---|---|---|---|---|---|---|---|
| 1 | |||||||
| 2 |
| # | Lot Title | Total Lot Price (PKR) | Country of Origin |
|---|---|---|---|
| 1 | [Lot 1 Title] |
1. Definitions
2. Application and Interpretation
2.1 These General Conditions shall apply to the extent that they are not superseded by provisions of other parts of the Contract.
2.2 In interpreting these Conditions of Contract headings and marginal notes are used for convenience only and shall not affect their interpretations unless specifically stated; references to singular include the plural and vice versa; and masculine include the feminine. Words have their ordinary meaning under the language of the Contract unless specifically defined.
3. Applicable Law
3.1 The contract shall be governed and interpreted in accordance with the laws of Pakistan, unless otherwise specified in SCC.
4. Governing Language
4.1 The Contract as well as all correspondence and documents relating to the Contract exchanged between the Bidder and the Procuring Agency, shall be written in the English language unless otherwise stated in the SCC. Supporting documents and printed literature that are part of the Contract may be in another language provided these are accompanied by an accurate translation of the relevant passages in English, in which case, for purposes of interpretation of the Contract, this translation shall govern.
5. Notices
5.1 Any notice, request, or consent made pursuant to this Contract shall be in writing and shall be deemed to have been made when delivered in person to an authorized representative of the Party to whom the communication is addressed, or when sent by registered mail, telex, telegram, or facsimile to such Party at the address specified in the SCC.
6. Delivery/Location
6.1 The Goods shall be delivered to such locations as the Procuring Agency may approve and as specified in SCC.
7. Authorized Representatives / Authority of Member in charge
7.1 Any action required or permitted to be taken, and any document required or permitted to be executed, under this Contract by the Procuring Agency or the Bidder may be taken or executed by the officials specified in the SCC.
8. Effectiveness of Contract
8.1 This Contract shall come into effect on the date the Contract is signed by both parties and such other later date as may be stated in the SCC.
9. Commencement of Services
9.1 The Bidder shall confirm availability of Key Experts and begin carrying out the Services not later than the number of days after the Effective Date specified in the SCC.
10. Program
10.1 Before commencement of the Services, the Bidder shall submit to the Procuring Agency for approval a Program showing the general methods, arrangements, order and timing for all activities. The Services shall be carried out in accordance with the approved Program as updated.
11. Starting Date/Expiration Date
11.1 The Bidder shall start carrying out the Services Five (05) days after the date the Contract becomes effective, or at such other date as may be specified in the SCC.
11.2 Unless terminated earlier pursuant to Clause GCC 15 hereof, this Contract shall expire at the end of such time period after the Effective Date as specified in the SCC.
12. Entire Agreement
12.1 This Contract contains all covenants, stipulations and provisions agreed by the Parties. No agent or representative of either Party has authority to make, and the Parties shall not be bound by or be liable for, any statement, representation, promise or agreement not set forth herein.
13. Modification
13.1 Any modification or variation of the terms and conditions of this Contract, including any modification or variation of the scope of the Services, may only be made by written agreement between the Parties. However, each Party shall give due consideration to any Bids for modification or variation made by the other Party.
13.2 In cases of any modifications or variations, the prior written consent of the Procuring Agency is required.
14. Force Majeure
14.1 Definition
For the purposes of this Contract, “Force Majeure” means an event which is beyond the reasonable control of a Party and which makes a Party’s performance of its obligations under the Contract impossible or so impractical as to be considered impossible under the circumstances.
14.2 No Breach of Contract
The failure of a Party to fulfill any of its obligations under the contract shall not be considered to be a breach of, or default under, this Contract in so far as such inability arises from an event of Force Majeure, provided that the Party affected by such an event (a) has taken all reasonable precautions, due care and reasonable alternative measures in order to carry out the terms and conditions of this Contract, and (b) has informed the other Party as soon as possible about the occurrence of such an event.
14.3 Extension of Time
Any period within which a Party shall, pursuant to this Contract, complete any action or task, shall be extended for a period equal to the time during which such Party was unable to perform such action as a result of Force Majeure.
14.4 Payments
During the period of their inability to perform the Services as a result of an event of Force Majeure, the Bidder shall be entitled to continue to be paid under the terms of this Contract, as well as to be reimbursed for additional costs reasonably and necessarily incurred by them during such period for the purposes of the Services and in reactivating the Service after the end of such period.
15. Termination
15.1 By the Procuring Agency
The Procuring Agency may terminate this Contract in case of the occurrence of any of the events specified in paragraphs (a) through (e) of this Clause. In such an occurrence the Procuring Agency shall give at least thirty (30) calendar days’ written notice of termination to the Bidder in case of the events referred to in (a) through (d); at least sixty (60) calendar days’ written notice in case of the event referred to in (e);
15.2 By the Bidder
The Bidder may terminate this Contract, by not less than thirty (30) calendar days’ written notice to the Procuring Agency, in case of the occurrence of any of the events specified in paragraphs (a) through (d) of this Clause.
16. General
16.1 Standard of Performance
16.2 Law Applicable to Goods
The Bidder shall deliver the goods in accordance with the Contract and in accordance with the Law of Pakistan and shall take all practicable steps to ensure that any of its Experts and Sub-Bidders, comply with the Applicable Law.
17. Conflict of Interests
17.1 Bidder Not to Benefit from Commissions and Discounts.
The remuneration of the Bidder shall constitute the Bidder’s sole remuneration in connection with this Contract or the Services, and the Bidder shall not accept for their own benefit any trade commission, discount, or similar payment in connection with activities pursuant to this Contract or to the Services or in the discharge of their obligations under the Contract, and the Bidder shall use their best efforts to ensure that the Personnel, any Subcontractors, and agents of either of them similarly shall not receive any such additional remuneration.
17.2 Bidder and Affiliates Not to be Otherwise Interested in Project
The Bidder agree that, during the term of this Contract and after its termination, the Bidder and its affiliates, as well as any Subcontractor and any of its affiliates, shall be disqualified from providing Goods for any project resulting from or closely related to the Services.
17.3 Prohibition of Conflicting Activities
Neither the Bidder nor its Subcontractors nor the Personnel shall engage, either directly or indirectly, in any of the following activities:
18. Confidentiality
18.1 Except with the prior written consent of the Procuring Agency, the Bidder and the Experts shall not at any time communicate to any person or entity any confidential information acquired in the course of the contract.
19. Insurance to be Taken Out by the Bidder
19.1 The Bidder(a) shall take out and maintain, and shall cause any Subcontractors to take out and maintain, at its (or the Subcontractors’, as the case may be) own cost but on terms and conditions approved by the Procuring Agency, insurance against the risks, loss or damage, and for the coverage, as shall be specified in the SCC; and (b) at the Procuring Agency’s request, shall provide evidence to the Procuring Agency showing that such insurance has been taken out and maintained and that the current premiums have been paid.
20. Bidder’s Actions Requiring Procuring Agency’s Prior Approval
20.1 The Bidder shall obtain the Procuring Agency’s prior approval in writing before taking any of the following actions:
(a) appointing such members of the Personnel not provided by the Bidder;
(b) changing the Program of activities; and
(c) any other action that may be specified in the SCC.
21. Reporting Obligations
21.1 The Bidder shall submit to the Procuring Agency the reports and documents in the numbers, and within the periods as prescribed by the Procuring Agency.
22. Liquidated Damages
22.1 If the Supplier fails to deliver any or all of the Goods or to perform the Services within the period(s) specified in the Contract, the Procuring Agency shall, without prejudice to its other remedies under the Contract, deduct from the Contract Price, as liquidated damages, a sum equivalent to the percentage specified in SCC of the delivered price of the delayed Goods or unperformed Services for each week or part thereof of delay until actual delivery or performance, up to a maximum deduction of the performance security (or guarantee) specified in SCC. Once the said maximum is reached, the Procuring Agency may consider termination of the Contract pursuant to GCC Clause 15.
22.2 Correction for Over-payment
If the Intended Completion Date is extended after liquidated damages have been paid, the Procuring Agency shall correct any overpayment of liquidated damages by the Bidder by adjusting the next payment certificate. The Bidder shall be paid interest on the overpayment, calculated from the date of payment to the date of repayment, at the rates specified in SCC.
22.3 Lack of performance penalty
If the Bidder has not corrected a Defect within the time specified in the Procuring Agency’s notice, a penalty for Lack of performance will be paid by the Bidder. The amount to be paid will be calculated as a percentage of the cost of having the Defect corrected, assessed as specified in the SCC.
23. Performance Guarantee
23.1 Within Seven (07) days from the issuance of acceptance letter from the Procuring Agency, the successful Bidder shall furnish the Performance Guarantee in shape of ------- at the discretion of the PA in the amount specified in SCC. In case the amount of Bids security is equal or greater than
23.2 The proceeds of the Performance Guarantee shall be payable to the Procuring agency as compensation for any loss resulting from the Supplier’s failure to complete its obligations under the Contract.
23.3 The Performance Guarantee shall be denominated in the currency of the Contract, or in a freely convertible currency acceptable to the Procuring agency and shall be in the acceptable form as specified in SCC.
23.4 The Performance Guarantee will be discharged by the Procuring agency and returned to the Supplier not later than thirty (30) days following the date of completion of the Supplier’s performance obligations under the Contract, including any warranty obligations, unless otherwise specified in SCC.
24. Fraud and Corruption
24.1 The Procuring Agency requires the Supplier to disclose any commissions or fees that may have been paid or are to be paid to agents or any other party with respect to the Bidding process or execution of the Contract. The information disclosed must include at least the name and address of the agent or other party, the amount and currency, and the purpose of the commission, gratuity or fee.
25. Sustainable Procurement
25.1 The Bidder shall conform to the sustainable procurement contractual provisions, if and as specified in the SCC.
26. Description of Personnel
26.1 The titles, agreed job descriptions, minimum qualifications, and estimated periods of engagement in the carrying out of the Services of the Bidder’s Key Personnel. The Key Personnel listed by title as well as by name are hereby approved by the Procuring Agency.
27. Removal and/or Replacement of Personnel
27.1 Except as the Procuring Agency may otherwise agree, no changes shall be made in the Key Personnel. If, for any reason beyond the reasonable control of the Bidder, it becomes necessary to replace any of the Key Personnel, the Bidder shall provide as a replacement a person of equivalent or better qualifications.
27.2 If the Procuring Agency finds that any of the Personnel have (i) committed serious misconduct or have been charged with having committed a criminal action, or (ii) have reasonable cause to be dissatisfied with the performance of any of the Personnel, then the Bidder shall, at the Procuring Agency’s written request specifying the grounds thereof, provide as a replacement a person with qualifications and experience acceptable to the Procuring Agency.
27.3 The Bidder shall have no claim for additional costs arising out of or incidental to any removal and/or replacement of Personnel.
28. Assistance and Exemptions
28.1 The Procuring Agency shall use its best efforts to ensure that the Government shall provide the Bidder such assistance and exemptions as specified in the SCC.
29. Change in the Applicable Law
29.1 If, after the date of this Contract, there is any change in the Applicable Law with respect to taxes and duties which increases or decreases the cost of the related Services rendered by the Bidder, then the remuneration and reimbursable expenses otherwise payable to the Bidder under this Contract shall be increased or decreased accordingly by agreement between the Parties, and corresponding adjustments shall be made to the amounts referred in the SCC.
30. Services and Facilities
30.1 The Procuring Agency shall make available to the Bidder and the Experts, for the purposes of the Services and free of any charge, the services, facilities and property described , at the times and in the manner specified in the SCC or terms of reference.
30.2 In case that such services, facilities and property shall not be made available to the Bidder, the Parties shall agree on (i) any time extension that it may be appropriate to grant to the Bidder for the performance of the Services, (ii) the manner in which the Bidder shall procure any such services, facilities and property from other sources, and (iii) the additional payments, if any, to be made to the Bidder as a result thereof.
31. Contract Price
31.1 The price payable shall be in Pakistani Rupees unless otherwise specified in the SCC. Prices charged by the Supplier for Goods delivered under the Contract shall not vary from the prices quoted by the Supplier in its Bid.
32. Terms and Conditions of Payment
32.1 Payments will be made to the Bidder according to the payment schedule stated in the SCC and as per actual invoice submitted by the Bidder.
32.2 Unless otherwise stated in the SCC, the advance payment shall be made against the provision by the Bidder of a bank guarantee for the same amount, and shall be valid for the period stated in the SCC. Any other payment shall be made after the conditions listed in the SCC for such payment have been met, and the Bidder have submitted an invoice to the Procuring Agency specifying the amount due.
33. Currency of Payment
33.1 Any payment under this Contract shall be made in the currency(ies) specified in the SCC.
34. Identifying Defects
34.1 The principle and modalities of Inspection of the Goods by the Procuring Agency shall be as indicated in the SCC. The Procuring Agency shall check the Bidder’s performance and notify him of any Defects that are found. Such checking shall not affect the Bidder’s responsibilities. The Procuring Agency may instruct the Bidder to search for a Defect and to uncover and test any service that the Procuring Agency considers may have a Defect. Defect Liability Period is as defined in the SCC.
35. Correction of Defects,and
Lack of Performance Penalty
35.1 The Procuring Agency shall give notice to the Bidder of any Defects before the end of the Contract. The Defects liability period shall be extended for as long as Defects remain to be corrected.
35.2 Every time notice a Defect is given, the Bidder shall correct the notified Defect within the length of time specified by the Procuring Agency’s notice.
35.3 If the Bidder has not corrected a Defect within the time specified in the Procuring Agency’s notice, the Procuring Agency will assess the cost of having the Defect corrected, the Bidder will pay this amount, and a Penalty for Lack of Performance.
36. Taxes and Duties
36.1 A Supplier shall be entirely responsible for all taxes, duties, fees, etc., incurred until delivery of the contracted Goods to the Procuring Agency.
37. Alternate Dispute Resolution
37.1 The disputes between the parties to the contract may be settled in accordance with Public Procurement Rules, 2004.
37.2 The procuring agency shall refer the matter to the Chief Justice Islamabad High Court or Managing Director PPRA or the Secretary Ministry of Law & Justice for appointment of Arbitrator.
37.3 The fee for the Arbitrator shall be specified in Pak Rupees as determined by the appointing authority which shall be borne and shared equally by the contracting parties.
The following Special Conditions of Contract shall supplement the General Conditions of Contract. Whenever there is a conflict, the provisions herein shall prevail over those in the Conditions of Contract. The corresponding clause number of the GCC is indicated in parentheses.
Number of GC Clause
Amendments of, and Supplements to, Clauses in the General Conditions of Contract
Number of GC Clause 1
Definitions
The Procuring Agency is: FEDERAL GOVERNMENT POLYCLINIC ISLAMABAD (FGPC-PGMI) (Federal Government Polyclinic (FGPC-PGMI)), Joint Executive Director FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
The Supplier is:
The title of the subject procurement is: Re-Tender for Purchase of Electro-Medical Equipment/s of General Surgery Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.
Number of GC Clause 3
Applicable/Governing Law:
The Contract shall be interpreted in accordance with the laws of Islamic Republic of Pakistan
Number of GC Clause 4
Language:
The language of the Contract, all correspondence and communications to be given, and all other documentation to be prepared and supplied under the Contract shall be in English.
Number of GC Clause 5
Notices:
The addresses for the notices are:
Procuring Agency:
FEDERAL GOVERNMENT POLYCLINIC ISLAMABAD (FGPC-PGMI) (Federal Government Polyclinic (FGPC-PGMI)), Joint Executive Director
FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
+92-333-550-9275
jed@fgpc.gov.pk
Contractor/ Bidder:
[Name, address and telephone number].
The Contractor/ Bidder’s Representative(s)
[Name, address, telephone number and e-mail address]
Number of GC Clause 7.1
The Authorized Representatives are:
For the Procuring Agency:
FEDERAL GOVERNMENT POLYCLINIC ISLAMABAD (FGPC-PGMI) (Federal Government Polyclinic (FGPC-PGMI)), Joint Executive Director
FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
+92-333-550-9275
jed@fgpc.gov.pk
For the Bidder:
Name: ………………………
Designation: ……………..
Address: ……………………………..
Number of GC Clause 8
Effectiveness of the contract
Number of GC Clause 9
Commencement of Contract:
Number of GC Clause 11.2
Expiration of Contract:
Number of GC Clause 15
Termination
In the event of termination of the contract due to any reason as already defined in the General Conditions of Contract, the Bidder shall be responsible for providing to the Authority the Goods till the time of alternate arrangements.
Number of GC Clause 17
Conflict of Interest:
The Procuring Agency reserves the right to determine on a case-by-case basis whether the Bidder should be disqualified from providing goods or services due to a conflict of a nature described in Clause GCC 17.
Number of GC Clause 22
Liquidated Damages
If the Bidder fails to provide services as required under the contract or in case of any data loss/data breach or any incident compromising the data security or other such failures related to any services, the Bidder shall pay to the Procuring Agency as Liquidated Damages at a rate of 0.10% to 2.00% of the Contract value, in accordance with the extent of performance failure & the cost of investigating such incidents as judged by the Authority.
Number of GC Clause 23
Performance Guarantee:
The amount of performance guarantee shall be 3.00% of the contract price in acceptable form of Pay Order, Call at Deposit
Number of GC Clause 32
Payment terms:
Payment will be made to the Bidder against the procured Goods and services according to the actual invoice or running bills submitted by the Bidder against the services provided within the time given in the conditions of the contract.
Number of GC Clause 33
Currency of Payment:
All the payment to be released to the contractor/Bidder shall be in Pakistani Rupees.
Number of GC Clause 34
Identifying Defects:
The Authority reserves the right at any time to inspect the premises of the provider to inspect the goods and monitor the goods being provided.
For being Brand New, bearing relevant reference numbers of the equipment (Certificate from supplier)
For Physical Fitness having No Damages (Certificate from supplier)
For the Country of Origin as quoted by the Supplier (Certificate from manufacturer)
For conformance to specifications and performance parameters by the end user
For successful operation at site after complete installation, testing and commissioning of the equipment (Installation, Testing and Commissioning Report by End user)
Copies of the Supplier’s invoice showing Goods’ description, quantity, unit price, and total amount;
Original and two copies of the usual transport document (for example, a negotiable bill of lading, a non-negotiable sea waybill, an inland waterway document, an air waybill, a railway consignment note, a road consignment note, or a multimodal transport document) which the buyer may require to take the goods;
Copies of the packing list identifying contents of each package;
Manufacturer’s or Supplier’s Valid Warranty Certificate;
Certificate of Origin.
Number of GC Clause 37
Following is the guidance for Dispute Resolution
Notwithstanding any reference to the arbitration herein, the parties shall continue to perform their respective obligations under the Contract unless they otherwise agree that the Authority shall pay the Bidder any monies due to the Bidder.
Rules of procedure for arbitration proceedings:
Any dispute between the Authority and a Bidder who is a national of the Islamic Republic of Pakistan arising in connection with the present Contract shall be referred to adjudication or arbitration in accordance with the laws of the Islamic Republic of Pakistan including Arbitration Act 1940, however above provision shall prevail in referring the case to the Arbitrator.
Place of Arbitration and Award:
The arbitration shall be conducted in English language and place of arbitration shall be at Islamabad. The award of the arbitrator shall be final and shall be binding on the parties.
Date: [insert date (as day, month and year)]
Bid No.:P45962
To: FEDERAL GOVERNMENT POLYCLINIC ISLAMABAD (FGPC-PGMI) (Federal Government Polyclinic (FGPC-PGMI)), Joint Executive Director FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
We, the undersigned, declare that:
We understand that, according to your conditions, Bids must be supported by a Bid Securing Declaration.
We accept that we will be blacklisted and henceforth cross debarred for participating in respective category of public procurement proceedings for a period of (not more than) six months, if fail to abide with a bid securing declaration, however without indulging in corrupt and fraudulent practices, if we are in breach of our obligation(s) under the Bid conditions, because we:
We understand this Bid Securing Declaration shall expire if we are not the successful
Bidder, upon the earlier of (i) our receipt of your notification to us of the name of the successful Bidder; or (ii) twenty-eight (28) days after the expiration of our Bid.
THIS AGREEMENT made the _____ day of __________ 20_____ between FEDERAL GOVERNMENT POLYCLINIC ISLAMABAD (FGPC-PGMI) (Federal Government Polyclinic (FGPC-PGMI)), Joint Executive Director FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
(hereinafter called “the Procuring Agency”) of the one part and [name of Bidder] of [city and country of Bidder] (hereinafter called “the Bidder”) of the other part:
WHEREAS the Procuring Agency invited Bids for provision of goods, viz., Re-Tender for Purchase of Electro-Medical Equipment/s of General Surgery Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27. (P45962) and has accepted a Bids by the Bidder for the provision of Goods in the sum of [contract price in words and figures] (hereinafter called “the Contract Price”).
NOW THIS CONTRACT WITNESSETH AS FOLLOWS:
1. In this Contract words and expressions shall have the same meanings as are respectively assigned to them in the Conditions of Contract referred to.
2. The following documents shall be deemed to form and be read and construed as part of this Contract, In the event of any ambiguity or conflict between the Contract Documents listed below, the order of precedence shall be the order in which the Contract Documents are listed below:-
3. In consideration of the payments to be made by the Procuring Agency to the Bidder as hereinafter mentioned, the Bidder hereby covenants with the Procuring Agency to provide the Goods related services and to remedy defects therein in conformity in all respects with the provisions of the Contract.
4. The Procuring Agency hereby covenants to pay the Bidder in consideration of the provision of Goods and the remedying of defects therein, the Contract Price or such other sum as may become payable under the provisions of the contract at the times and in the manner prescribed by the contract.
IN WITNESS whereof the parties hereto have caused this Contract to be executed in accordance with their respective laws the day and year first above written.
Signed, sealed, delivered by __________________the ________________ (for the Procuring Agency)
Witness to the signatures of the Procuring Agency:
………………………………………………
Signed, sealed, delivered by __________________the ________________ (for the Procuring Agency)
Witness to the signatures of the Bidder: …………………………………………………
Contract Number: Contract Value: Contract Title:
Dated:
[Name of Supplier] hereby declares that it has not obtained or induced the procurement of any contract, right, interest, privilege or other obligation or benefit from Government of Pakistan or any administrative subdivision or agency thereof or any other entity owned or controlled by it (GoP) through any corrupt business practice.
Without limiting the generality of the foregoing [Name of Supplier] represents and warrants that it has fully declared the brokerage, commission, fee etc. paid or payable to anyone and not given or agreed to give and shall not give or agree to give to anyone within or outside Pakistan either directly or indirectly through any natural or juridical person, including its affiliate, agent, associate, broker, consultant, director, promoter, shareholder, sponsor or subsidiary, any commission, gratification, bribe, finder's fee or kickback, whether described as consultations fee or otherwise, with the object of obtaining or inducing the procurement of a contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP, except that which has been expressly declared pursuant hereto.
[Name of Supplier] certifies that it has made and will make full disclosure of all agreements and arrangements with all persons in respect of or related to the transaction with GoP and has not taken any action or will not take any action to circumvent the above declaration, representative or warranty.
[Name of Supplier] accepts full responsibility and strict liability for making and false declaration, not making full disclosure, misrepresenting fact or taking any action likely to defeat the purpose of this declaration, representation and warranty. It agrees that any contract, right interest, privilege or other obligation or benefit obtained or procured as aforesaid shall, without prejudice to any other right and remedies available to GoP under any law, contract or other instrument, be voidable at the option of GoP.
Notwithstanding any rights and remedies exercised by GoP in this regard, [Name of Supplier] agrees to indemnify GoP for any loss or damage incurred by it on account of its corrupt business practices and further pay compensation to GoP in an amount equivalent to ten time the sum of any commission, gratification, bribe, finder's fee or kickback given by [Name of Supplier] as aforesaid for the purpose of obtaining or inducing the procurement of any contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP.
To: FEDERAL GOVERNMENT POLYCLINIC ISLAMABAD (FGPC-PGMI) (Federal Government Polyclinic (FGPC-PGMI)), Joint Executive Director FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
WHEREAS [name of Bidder] (hereinafter called “the Bidder”) has undertaken, in pursuance of Contract No. [reference number of the contract] dated [insert date] for provision of Goods(hereinafter called “the Contract”).
AND WHEREAS it has been stipulated by you in the said Contract that the Bidder shall furnish you with a Bank Guarantee by a reputable bank for the sum specified therein as security for compliance with the Bidder’s performance obligations in accordance with the Contract.
AND WHEREAS we have agreed to give the Bidders guarantee:
THEREFORE, WE hereby affirm that we are Guarantors and responsible to you, on behalf of the Bidder, up to a total of [amount of the guarantee in words and figures], and we undertake to pay you, upon your first written demand declaring the Bidder to be in default under the Contract and without cavil or argument, any sum or sums within the limits of [amount of guarantee] as aforesaid, without your needing to prove or to show grounds or reasons for your demand or the sum specified therein.
This guarantee is valid until the: [insert date]
Signature and seal of the Guarantors
_____________________________________________________________________
[name of bank or financial institution]
_____________________________________________________________________
[address]
_____________________________________________________________________
[date}
|
The bidder/vendor should have minimum 03 years experience for supply of electro medical equipment to public sector hospitals/Tertiary care Hospitals independently or through International Agencies and NGO’s (attach documentary proof). |
|
Affidavit of non-blacklisting. The bidder must submit an affidavit on stamp paper worth Rs. 100/- declaring that the firm has not been blacklisted by any Federal or Provincial Government department, or any public sector organization within Pakistan. |
|
Ensures / undertakes on legally notarized stamp paper that it has no litigation(s) or arbitrary cases by any department, is not insolvent, in receivership, bankrupt or being penalized and its activities or affairs are not suspended or being administered under any Act, by a court or by a judicial officer. |
|
The bidder must provide/attach satisfactory performance certificate regarding supplies/ services of electro-medical equipment issued by the public sector hospitals/Tertiary care Hospitals |
|
The bidder will provide bank statement of last 03 (three) financial years (from 1st July to 30th June) i.e 2022-23, 2023-24 & 2024-25 |
|
The bidder must provide proof of annual turnover of the firm minimum 20 million for the Financial year 2024-25. |