Public Notification | e-Pak Acquisition and Disposal System (EPADS)

Standard Bidding Document

Download Document

Download Document Download SBD

📑 Procurement Notice (NIT)

Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Published on: Thursday, June 11, 2026 12:00 AM

Ref# : P45965

INVITATION TO BIDS

PROCUREMENT OF GOODS

The FEDERAL GOVERNMENT POLYCLINIC ISLAMABAD (FGPC-PGMI) (Federal Government Polyclinic (FGPC-PGMI)) has reserved Funds for the procurement planned for FY 2026-27. The FEDERAL GOVERNMENT POLYCLINIC ISLAMABAD (FGPC-PGMI) (Federal Government Polyclinic (FGPC-PGMI)) intends to apply part of the proceeds of this Fund to cover eligible payments under the contract for the "Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.".
The FEDERAL GOVERNMENT POLYCLINIC ISLAMABAD (FGPC-PGMI) (Federal Government Polyclinic (FGPC-PGMI)) invites E-bids from eligible Bidders for procurement of goods descibed in the bidding documents on EPADS v2.0.
Single Stage-Two Envelope will be used by adopting Least Cost Based Selection (LCBS) Technique for the subject procurement, in line with the Public Procurement Rules, 2004 and any Regulations, Regulatory Guides, Procurement Guidelines or Instructions issued by the Authority from time to time.
All Bids must be accompanied by a Bid Security amounting described in Bid Security Section in Bidding Document in the form of Pay Order, Call at Deposit. Where Bid Security is not required by the Procuring Agency, Bidders are required to furnish Bid Security Declaration as specified in Bidding Document.
E-Bidding documents, containing detailed terms & conditions, specifications and requirements etc. are available on e-Pak Acquisition and Disposal System (EPADS) at https://vendors.epads.gov.pk/.
Bidder(s) are required to get themselves registered on EPADS v2.0 on or before Friday, June 26, 2026 09:00 AM. E-bids will be opened using EPADS v2.0 on the same day at Friday, June 26, 2026 09:30 AM. Manual submission of Bids shall not be entertained. Those vendors who have not yet registered on the new version of EPADS v2.0, may register themselves on https://vendors.epads.gov.pk/. A tutorial to explain the registration process is available at https://www.youtube.com/watch?v=MNW6T38v7tc

7. In terms of Rules 48 of Public Procurement Rules, 2004 Grievance Redressal Committee (GRC) is notified for the subject procurement and notification copy is available on the procuring agency’s website and on Authority’s website at (www.ppra.org.pk).

FEDERAL GOVERNMENT POLYCLINIC ISLAMABAD (FGPC-PGMI) (Federal Government Polyclinic (FGPC-PGMI)), Joint Executive Director
FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory
+92-333-550-9275
jed@fgpc.gov.pk

📑 Instructions to Bidders (ITB)

Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Published on: Thursday, June 11, 2026 12:00 AM

Ref# : P45965

A. Introduction

1.Scope of Bids

1.1 The Procuring Agency (PA), as indicated in the Bids Data Sheet (BDS) invites Bids through EPADS v2.0 for the provision of Goods for as specified in the BDS and in Section V – Evaluation Criteria, Specifications & Schedule of Requirements. The name, identification, and number of items/deliverables are provided in the BDS. The successful Bidders will be expected to provide the goods within the specified period and timeline(s) as stated in the BDS.

2. Source of Funds

2.1 Source of funds is referred in Clause-1 of Invitation for Bids.

3. Eligible Bidders

3.1 A Bidder may be natural person, company or firm or public or semi-public agency of Pakistan or any foreign country, or any combination of them with a formal existing agreement (on Judicial Papers) in the form of a joint venture, consortium, or association. In the case of a joint venture, consortium, or association, all members shall be jointly and severally liable for the execution of the Contract in accordance with the terms and conditions of the Contract. The joint venture, consortium, or association shall nominate a Lead Member as nominated in the BDS, who shall have the authority to conduct all business for and on behalf of any and all the members of the joint venture, consortium, or association during the Bidding process, and in case of award of contract, during the execution of the contract.

3.2 Verifiable copy of the agreement that forms a joint venture, consortium or association shall be required to be submitted as part of the Bid.

3.3 The appointment of Lead Member in the joint venture, consortium, or association shall be confirmed by submission of a valid Power of Attorney to the Procuring Agency.

3.4 Any bid submitted by the joint venture, consortium or association shall indicate the part of proposed contract to be performed by each party and each party shall be evaluated (or post qualified if required) with respect to its contribution only, and the responsibilities of each party shall not be substantially altered without prior written approval of the Procuring Agency and in line with any instructions issued by the Authority.

(The limit on the number of members of JV or Consortium or Association may be prescribed in BDS, in accordance with the guidelines issued by the PPRA).

3.5 The invitation for Bids is open to all prospective suppliers, manufacturers, or authorized agents / dealers subject to any provisions of incorporation or licensing by the respective national incorporating agency or statutory body established for that particular trade or business. Procuring agencies shall specify the registration/licensing requirements for the foreign bidders keeping in view the requirement of that business.

3.6 A Bidder shall not have a conflict of interest. All Bidders found to have a conflict of interest shall be disqualified. A Bidder may be considered to have a conflict of interest with one or more parties in this Bidding process, if they:

are associated or have been associated in the past, directly or indirectly with a firm or any of its affiliates which have been engaged by the Procuring Agency to provide consulting services for the preparation of the design, specifications and other documents to be used for the procurement of the Goods to be purchased under this Invitation for Bids.
have controlling shareholders in common; or
receive or have received any direct or indirect subsidy from any of them; or
have the same legal representative for purposes of this Bid; or
have a relationship with each other, directly or through common third parties, that puts them in a position to have access to information about or influence on the Bids of another Bidder, or influence the decisions of the Procuring Agency regarding this Bidding process; or
Submit more than one Bid in this Bidding process.

3.7 A Bidder may be ineligible if –

he is declared bankrupt or, in the case of company or firm, insolvent;
payments in favor of the Bidder is suspended in accordance with the judgment of a court of law other than a judgment declaring bankruptcy and resulting (in accordance with the national laws) in the total or partial loss of the right to administer and dispose of its property;
the Bidder is convicted, by a final judgment, of any offence involving professional conduct;
the Bidder is blacklisted locally or by international organizations and hence debarred due to involvement in corrupt and fraudulent practices, or performance failure or due to breach of Bid securing declaration.

3.8 As and when required, bidders shall provide to the Procuring Agency evidence of their eligibility, proof of compliance with the necessary legal requirements to carry out the contract effectively.

3.9 Bidders shall submit Bids relating to the nature, conditions and modalities of sub-contracting wherever the sub-contracting of any elements of the contract amounting to more than ten (10) percent of the Bid price is envisaged.

4. Eligible Goods and Related Services

4.1 All goods and related services to be supplied under the contract shall have their origin in eligible source countries, and all expenditures made under the contract will be limited to such goods and services. For purpose of this Bid, ineligible countries are the countries declared ineligible by the Federal Government.

5. One Bid per Bidder

5.1 A bidder shall submit only one Bid, in the same bidding process, either individually as a Bidder or as a member in a joint venture or any similar arrangement.

5.2 The Bidder shall not engage a subcontractor for any portion of the contract if the value of such subcontracting exceeds thirty percent (30%) of the total contract amount.

6. Cost of Bidding

6.1 Any cost incurred by the bidder relating to the preparation and submission of its Bid shall be borne by the bidder, and the Procuring Agency shall in no case be responsible or liable for those costs, regardless of the conduct or outcome of the bidding process.

B. Bidding Documents

7. Contents of Bidding Document

7.1 The Goods required, Bidding procedures, and terms and conditions of the contract are prescribed in the Bidding Documents. In addition to the Invitation for Bids, the Bidding documents which should be read in conjunction with any addenda issued in accordance with ITB 9.1 include:

Section I -Invitation to Bids

Section II Instructions to Bidders (ITB)

Section III Bid Data Sheet (BDS)

Section IV Evaluation Criteria, Specifications, Schedule of Requirements

Section V Bid Forms

Section VI General Conditions of Contract (GCC)

Section VII Special Conditions of Contract (SCC)

Section VIII Contract Forms

7.2 The Bidder is expected to examine all instructions, forms, terms and specifications in the Bidding documents. Failure to furnish all the information required in the Bidding documents through EPADS v2.0 will be at the Bidder’s risk and may result in the rejection of his Bids.

8. Clarification of Bidding documents

8.1 A prospective Bidder requiring any clarification of the Bidding documents may notify the Procuring Agency through EPADS v2.0.

8.2 The Procuring Agency will within three (3) working days after receiving the request for clarification, respond to any request for clarification through EPADS v2.0 provided that such request is received not later than three (03) days prior to the deadline for the submission of Bids as prescribed in ITB 22

8.3 Copies of the Procuring Agency's response will be forwarded to all identified Prospective Bidders through EPADS v2.0, including a description of the inquiry, but without identifying its source.

8.4 Should the Procuring Agency deem it necessary to amend the Bidding document as a result of a clarification, it shall do so following the procedure under ITB 9.

8.5 If indicated in the BDS, the Bidder’s designated representative is invited at the Bidder’s cost to attend a pre-Bid meeting at the place, date and time mentioned in the BDS. During this pre-Bid meeting, prospective Bidders may request clarification of the schedule of requirement, the Evaluation Criteria or any other aspects of the Bidding document.

8.6 Minutes of the pre-Bid meeting, if applicable, including the text of the questions asked by Bidders, including those during the meeting (without identifying the source) and the responses given, together with any responses prepared after the meeting will be uploaded on EPADS v2.0. Any modification to the Bidding documents that may become necessary as a result of the pre-Bid meeting shall be made by the Procuring Agency exclusively through the use of an Addendum pursuant to ITB 9. Non-attendance at the pre-Bid meeting will not be a cause for disqualification of a Bidder.

9. Amendment of Bidding documents

9.1 Before the deadline for submission of Bids, the Procuring Agency for any reason, whether at its own initiative or in response to a clarification requested by a prospective Bidder or Pre-Bid meeting may modify the Bidding documents by issuing addenda through EPADS v2.0.

9.2 The Procuring Agency shall promptly publish the addendum through EPADS v2.0.

9.3 Any addendum issued including the notice of any extension of the deadline shall also be communicated through EPADS v2.0 to all the bidders who have already submitted their bids. Such bidders shall have the right to withdraw their already submitted bid and re-submit the revised bid prior to the original or extended bid submission deadline.

9.4 To give prospective Bidders reasonable time in which to take an addendum/corrigendum into account in preparing their Bids, the Procuring Agency may, at its discretion, extend the deadline for the submission of Bids through EPADS v2.0:

Provided that the Procuring Agency shall extend the deadline for submission of Bids, if such an addendum is issued within last three (03) days of the Bids submission deadline.

C. Preparation of Bids

10. Language of Bid

10.1 The Bid prepared by the bidder, as well as all correspondence and documents relating to the Bids exchanged by the Bidder and the Procuring Agency shall be written in the English language unless otherwise specified in the BDS. Supporting documents and printed literature furnished by the Bidder may be in another language provided they are accompanied by an accurate translation of the relevant pages in the English language unless otherwise specified in the BDS, in which case, for purposes of interpretation of the Bidder, the translation shall govern.

11. Documents and samples Constituting the Bid

11.1 The Bid prepared by the Bidder shall constitute thedocuments required in the BDS.

Details of sample(s) where applicable and requested in the BDS.

1. Documentary evidence established in accordance with ITB that the Bidder is eligible and/or qualified for the subject bidding process;

2. Documentary evidence establish that the Bidder has been authorized by the manufacturer to deliver the goods into Pakistan, where required and where the supplier is not the manufacturer of those goods;

3. Documentary evidence establish that the goods and related services to be supplied by the Bidder are eligible goods and services, and conform to the Bidding Documents;

4. Bid security or Bid Securing Declaration furnished in accordance with ITB 18.

12. Documents Establishing Eligibility of the Goods and Conformity to Bidding documents

12.1 To establish the conformity of the bidder to the Bidding document, the Bidder shall furnish as part of its Bids the documentary evidence that Goods provided conform to the technical specifications and standards.

13. Documents Establishing Eligibility and Qualification of the Bidder

13.1 The Bidder shall furnish, as part of itsBid, all those documents establishing the Bidder’s eligibility to participate in the Bidding process and/or its qualification to perform the contract if its Bid is accepted.

14. Form of Bids

14.1 The Bidder shall fill the Form of Bid furnished in the Bidding documents.The Bids Form must be completed without any alterations to its format and no substitute shall be accepted.

15. Bids Prices

15.1 The Bids Prices quoted by the Bidder in the Form of Bid and in the Price Schedules shall conform to the requirements specified below or exclusively mentioned hereafter in the Bidding documents.

15.2 All items in the Schedule of Requirement must be listed and priced separately in the Price Schedule(s). If a Price Schedule shows items listed but not priced and neither explicitly denied, their prices shall be construed to be included in the prices of other items.

15.3 Items not listed in the Price Schedule shall be assumed not to be included in the Bid, and provided that the Bid is still substantially responsive in their absence or due to their nominal nature, the corresponding average price of the respective item(s) of the remaining substantially responsive Bidder(s) shall be construed to be the price of those missing item(s)

15.4 The Bid price to be quoted in the Form of Bid in accordance with ITB 14.1 shall be the total price of the Bid.

15.5 The Bidder shall indicate on the appropriate Price Schedule, the unit prices (where applicable) and total Bid price of the Goods it proposes to provide under the contract.

15.6 Prices quoted by the Bidder shall be fixed during the Bidder’s performance of the contract and not subject to variation on any account. A Bid submitted with an adjustable price will be treated as non-responsive and shall be rejected.

16. Bids Currencies

16.1 Prices shall be quoted in Pakistani Rupees unless otherwise specified in the BDS in accordance with Rule 30 (2) of the Public Procurement Rules, 2004.

17. Bids Validity Period

17.1 Bids shall remain valid for the period specified in the BDS after the Bid submission deadline prescribed by the Procuring Agency. A Bid valid for a shorter period shall be rejected by the Procuring Agency as non-responsive. The period of Bid validity will be determined from the complementary Bid securing instrument, i.e. the expiry period of Bid Security or Bids Securing Declaration as the case may be.

17.2 The procuring agency shall ordinarily be under an obligation to process and evaluate the bid and to issue letter of award within the stipulated bid validity period.

17.3 Under exceptional circumstances, prior to the expiration of the initial Bid validity period, the Procuring Agency may request the Bidders’ consent to an extension of the period of validity of their Bids only once through EPADS v2.0, for the period not more than the period of initial bid validity. The Bid Security provided under ITB 18 shall also be suitably extended. A Bidder may refuse the request without forfeiting its Bid security or causing to be executed its Bid Securing Declaration. A Bidder agreeing to the request will not be required nor permitted to modify its Bid, but will be required to extend the validity of its Bid Security or Bid Securing Declaration for the period of the extension.

18. Bid Security or Bid Securing Declaration

18.1 The Bidder shall furnish as part of its Bid, a Bid Security in accordance with Rule 25 of the Public Procurement Rules, 2004.

18.2 The original Bid Security shall be enclosed within the sealed envelope and to be submitted physically before closing time for submission of bids. Whereas, scanned copy of bid security shall be uploaded electronically through EPADS v2.0 before closing hours for submission of bids.

18.3 The Bidder who failed to submit the original Bids security before the submission deadline shall be disqualified straightaway.

18.4 The Bid Security or Bid Securing Declaration is required to protect the Procuring Agency against the risk of Bidder’s conduct which would warrant the security’s forfeiture, pursuant to ITB 18.7.

18.5 The Bid Security shall be denominated in the local currency, and it shall be a Bank Draft in the name of the Procuring Agency and valid for twenty-eight (28) days beyond the end of the validity of the Bid. This shall also apply if the period for Bids/Bid Validity is extended. In either case, the form must include the complete name of the Bidder.

18.6 The Bid Security shall be payable promptly upon written demand by the Procuring Agency in case any of the conditions listed in ITB 18 are invoked.

18.7 Unsuccessful Bidders’ Bid Security will be discharged or returned as promptly as possible, however in no case later than thirty (30) days after the expiration of the period of Bids Validity prescribed by the Procuring Agency pursuant to ITB 17. The Procuring Agency shall make no claim to the amount of the Bid Security, and shall promptly return the Bid Security document, after whichever of the following that occurs earliest:

the expiry of the Bid Security;
the entry into force of a procurement contract and the provision of a Performance Guarantee, for the performance of the contract if such a guarantee, is required by the Bid documents;
the rejection by the Procuring Agency of all Bids;
the withdrawal of the Bids prior to the deadline for the submission of Bids, unless the Bids documents stipulate that no such withdrawal is permitted.

18.8 The successful Bidder’s Bids Security will be discharged upon the Bidder signing the contract, or furnishing the Performance Guarantee.

18.9 The Bid Security may be forfeited or the Bid Securing Declaration executed:

if a Bidder:
withdraws its Bid during the period of Bid Validity as specified by the Procuring Agency, and referred by the Bidder on the Form of Bids except as provided for in ITB 17.2; or
does not accept the correction of errors; or
in the case of a successful Bidder, if the Bidder fails:
to sign the contract; or
to furnish Performance Guarantee.

19. Withdrawal, Substitution, and Modification of Bid

19.1 Before Bid submission deadline, any Bidder may withdraw, substitute, or modify its Bid after it has been submitted through EPADS v2.0. Bids requested to be withdrawn, shall be returned unopened to the Bidders through EPADS v2.0.

20. Format and Signing of Bid

20.1 The Bidder shall prepare and submit Bids with due diligence after carefully reading all the terms and condition before bid submission deadline through EPADS v2.0.

D. Submission of Bids

21. Submission of Bids through EPADS v2.0

21.1 The Technical and Financial Bids if required to submitted, shall be submitted on EPADS v2.0.

22. Deadline for Submission of Bids

22.1 Bids shall be received by the Procuring Agency through EPADS v2.0 before bid submission deadline.

22.2 The Procuring Agency may, under exceptional circumstances, extend the deadline for the submission of Bids, after recording reasons in writing and in an equal opportunity manner.

In such case, all rights and obligations of the Procuring Agency and the Bidders that were previously governed by the original deadline shall thereafter be subject to the revised deadline.

E. Opening and Evaluation of Bids

23. Opening of Bids

23.1 The Bid Evaluation Committee of the Procuring Agency shall open all Bids through the EPADS v2.0, on the date and time specified in the Bid Data Sheet (BDS).

23.2 The Bid Evaluation Committee shall generate minutes through EPADS v2.0 containing brief details of bid opening process. The record of the Bid opening shall include, as a minimum: the name of the Bidder, the Bid price if applicable, and the presence or absence of a Bid Security or Bid Securing Declaration.

23.3 The procuring agency shall live broadcast the opening of bids on national media or on their website or digital channels, if the volume of procurement exceeds five hundred million rupees in case of goods and services and one thousand million rupees in case of works.

23.4 In case the date of opening of bid has been declared as public holiday or the procuring agency fail to open bid due to any EPADS v2.0 related issues, the submission and opening of bids shall be shifted to the next working day on the same time.

23.5 In case of Single Stage One Envelope Procedure, the Bidders names, the Bid prices, the total amount of each Bid and, the presence or absence of Bid Security, Bid Securing Declaration and such other details as the Procuring Agency may consider appropriate, will be announced by the Bid Evaluation Committee.

24. Clarification of Bids

24.1 To assist in the examination, evaluation and comparison of Bids of the Bidders, the Procuring Agency may, ask any Bidder for a clarification of its Bid including breakdown of prices.

24.2 The request for clarification and the response shall be sought through EPADS v2.0 before three days prior to the deadline for submission of bids. No change in the prices or substance of the Bids shall be sought, offered, or permitted.

24.3 The alteration or modification in the BIDS which in any way affect the following parameters will be considered as a change in the substance of a Bids:

evaluation & qualification criteria;
required scope of work or specifications;
all securities requirements;
tax requirements;
terms and conditions of Bidding documents.
change in the ranking of the Bidder

24.4 From the time of Bids opening to the time of Contract award if any Bidder wishes to contact the Procuring Agency on any matter related to the Bids it should do so through EPADS v2.0.

25. Preliminary Examination of Bids

25.1 Prior to the detailed evaluation of Bids, the Procuring Agency will determine whether each Bid:

meets the eligibility criteria defined in ITB 3;
has been prepared as per the format and contents defined by the Procuring Agency in the Bidding documents;
is accompanied by the required securities; and
is substantially responsive to the requirements of the Bidding documents.

25.2 The Procuring Agency's determination of a Bid's responsiveness will be based on the contents of the Bid itself.

25.3 A substantially responsive Bid is one which conforms to all the terms, conditions, and specifications of the Bidding documents, without material deviation or reservation. A material deviation or reservation is one that: -

affects in any substantial way the scope, quality, or performance of the Goods;
limits in any substantial way, inconsistent with the Bidding documents, the Procuring Agency's rights or the Bidders obligations under the Contract; or
if rectified, would affect unfairly the competitive position of other Bidders presenting substantially responsive Bids.

25.3 If a Bids is not substantially responsive, it will be rejected by the Procuring Agency and may not subsequently be evaluated for complete technical responsiveness.

26. Examination of Terms and Conditions; Technical Evaluation

26.1 The Procuring Agency shall examine the Bids to confirm that all terms and conditions specified in the GCC and the SCC have been accepted by the Bidder without any material deviation or reservation.

26.2 The Procuring Agency shall evaluate the technical aspects of the Bids submitted, to confirm that all requirements specified in Schedule of Requirements and Technical Specifications of the Bidding documents have been met without material deviation or reservation.

26.3 If after the examination of the terms and conditions and the technical evaluation, the Procuring Agency determines that the Bid is not substantially responsive in accordance with ITB 25.2, it shall reject the Bid.

27. Correction of Errors

27.1 Bids determined to be substantially responsive will be checked for any arithmetic errors. Errors will be corrected as follows: -

if there is a discrepancy between unit prices and the total price that is obtained by multiplying the unit price and quantity, the unit price shall prevail, and the total price shall be corrected, unless in the opinion of the Procuring Agency there is an obvious misplacement of the decimal point in the unit price, in which the total price as quoted shall govern and the unit price shall be corrected;
if there is an error in a total corresponding to the addition or subtraction of sub-totals, the sub-totals shall prevail and the total shall be corrected; and
where there is a discrepancy between the amounts in figures and in words, the amount in words will govern.
Where there is discrepancy between grand total of price schedule and amount mentioned on the Form of Bids, the amount referred in Price Schedule shall be treated as correct subject to elimination of other errors.

27.2 The amount stated in the Bid will, be adjusted by the Procuring Agency in accordance with the above procedure for the correction of errors and, with the concurrence of the Bidder, shall be considered as binding upon the Bidder. If the Bidder does not accept the corrected amount, its Bid will then be rejected, and the Bid Security may be forfeited or the Bids Securing Declaration may be executed.

28. Conversion to Single Currency

28.1 To facilitate evaluation and comparison, the Procuring Agency will convert all Bids prices expressed in the amounts in various currencies in which the Bids prices are payable. For the purposes of comparison of bids quoted in different currencies, the price shall be converted into a single currency specified in the bidding documents. The rate of exchange shall be the selling rate prevailing on the date of opening of financial bids specified in the bidding documents, in accordance with weighted average customer exchange rates list issued by the State Bank of Pakistan on that day.

29. Evaluation of Bids

29.1 The Bids, quotations, or proposals shall be evaluated by the respective evaluation committees as per evaluation criteria described in the Bidding Documents in accordance with Rule 29 and 30 of the Public Procurement Rules, 2004.

1. Least Cost Based Selection (LCBS)
After meeting the requirements of eligibility, qualification and substantial responsiveness, the bid in compliance with all the mandatory (technical) specifications/requirements and/or requisite quality threshold (if any), and having lowest evaluated cost (or financial proposal) shall be considered Successful Bid.

2. Quality and Cost Based Selection (QCBS)
In such combination, there shall be some specific weightage of both the technical features and financial aspects of the proposal. The financial marks shall be awarded on the basis of inverse proportion calculations. The successful bid shall be declared, on the basis of combined evaluation.

3. Quality Based Selection (QBS)
Atter meeting the requirements of eligibility, qualification and substantial responsiveness the bid in compliance with all the mandatory (technical) specifications/requirements and attaining highest marks in the Technical Evaluation considering all other qualitative and/or quantitative parameters (or point rated criteria) for technical proposal(s) such as working methodology, implementation plan, resource allocation, additional functionalities, risk management approach, knowledge transfer techniques, post implementation methodology etc. shall be treated as highest ranked bid. Later on, the financial proposal of highest ranked bidder shall be opened, however, in case of failure to proceed further with such a bidder, the procuring agency may resort to second highest bidder and so on.

29.2 In case of tie of bids, the bidders shall be provided an opportunity to offer their best and final monetary offer through EPADS v2.0. However, in no case the rates shall be higher than the original financial bids.

30. Domestic Preference

30.1 The procuring agency shall evaluate and compare bids, allow for preference to domestic bidders, while competing with the international bidders in accordance with the policies of Federal Government.

The percentage of preference, to be accorded shall be clearly mentioned in the bidding documents under the bid evaluation criteria.

31. Determination of Successful Bid

31.1 Selection technique will be adopted for determining the Successful Bid in accordance with the criteria referred in the BDS or prescribed in the separate section titled as Evaluation Criteria.

31.2 In case where the Procuring Agency adopts the Cost Based Evaluation Technique and, the Bid with the lowest evaluated price from amongst those which are eligible, compliant and substantially responsive shall be the Successful Bid.

31.3 The Procuring Agency may adopt the Quality & Cost Based Selection Technique due to the following two reasons:

1. Where the Procuring Agency knows about the main features, usage and output of the products; however not clear about the complete features, technical specifications and functionalities of the goods to be procured and requires the bidders to submit their proposals defining those features, specifications and functionalities; or

2. Where the Procuring Agency, in addition to the mandatory requirements and mandatory technical specifications, requires parameters specified in Evaluation Criteria to be evaluated while determining the quality of the goods.

31.4 In such cases, the Procuring Agency may allocate certain weightage to these factors as a part of Evaluation Criteria, and may determine the ranking of the bidders on the basis of combined evaluation in accordance with provisions of Rule 2(1)(h) of the Public Procurement Rules, 2004.

32. Abnormally Low Financial Bids

32.1Where the Bid price is considered to be abnormally low, the Procuring Agency shall perform price analysis either during determination of Successful Bids or as a part of the post-qualification process.

32.2 The Procuring Agency may reject an Abnormally low financial bids.

32.3 In order to identify the Abnormally Low Bids (ALB) following approaches can be considered to minimize the scope of subjectivity:

Comparing the Bids price with the cost estimate;
Comparing the Bids price with the Bids offered by other Bidders submitting substantially responsive Bids; and
Comparing the Bids price with prices paid in similar contracts in the recent past either government- or development partner-funded.

32.4 The Procuring Agency will determine to its satisfaction whether the Bidder that is selected as having submitted the successful bid is qualified to perform the contract satisfactorily.

32.5 The determination will take into account the Bidder’s financial, technical, and production capabilities. It will be based upon an examination of the documentary evidence of the Bidder’s qualifications submitted by the Bidder, as well as such other information as the Procuring Agency deems necessary and appropriate. Factors not included in these Bidding documents shall not be used in the evaluation of the Bidders’ qualifications.

32.6 Procuring Agency may seek “Certificate for Independent Price Determination” from the Bidder and the results of reference checks may be used in determining an award of contract.

Explanation: The Certificate shall be furnished by the Bidder. The Bidder shall certify that the price is determined keeping in view of all the essential aspects such as raw material, its processing, value addition, optimization of resources due to economy of scale, transportation, insurance and margin of profit etc.

32.7 An affirmative determination will be a prerequisite for award of the contract to the Bidder. A negative determination will result in rejection of the Bidder’s Bids, in which event the Procuring Agency will proceed to the next ranked Bidder to make a similar determination of that Bidder’s capabilities to perform satisfactorily.

F. Award of Contract

33. Criteria of Award

33.1 The Procuring Agency will award the Contract to the Bidder whose Bids has been determined to be substantially responsive to the Bidding documents and who has been declared as Most Advantageous Bidder.

34. Negotiations

34.1 The procuring agency shall not engage in negotiations with respect to scope and price with the bidder except when the procuring agency conducts a procurement using direct or negotiated contracting or a request for proposals with evaluation based on quality alone.

34.2 The procuring agency may negotiate with the most advantageous bid with a view to streamline the work or task execution, at the time of contract finalization on methodology, work plan, staffing, finalizing payment arrangements, delivery arrangements, minor amendments to the special conditions of the contract.

35. Procuring Agency Right to reject all bids

35.1 The Procuring Agency reserves the right to reject all bids or proposals at any time prior to the issuance of the Letter of Award, without incurring any liability, in accordance with Rule 33 of the Public Procurement Rules, 2004.

36. Procuring Agency’s Right to Vary Quantities at the Time of Award

36.1 The Procuring Agency reserves the right at the time of contract award to increase or decrease the quantity of Goods originally specified in these Bidding documents provided this does not exceed by 15%, without any change in unit price or other terms and conditions of the Bids and Bidding documents.

37. Notification of Award

37.1 Prior to the award of contract, the procuring agency shall announce and publish the result of bid evaluation on EPADS v2.0 in accordance with Rule 35 of the Public Procurement Rules, 2004.

37.2 The Bidder whose Bids has been accepted will be notified of the award by the Procuring Agency prior to expiration of the Bids/Bid Validity period. The Letter of Award will state the sum that the Procuring Agency will pay the successful Bidder in consideration for the delivery of Goods as prescribed by the Contract (hereinafter and in the Contract called the "Contract Price).

37.3 The Letter of award will constitute the formation of the Contract, subject to the Bidder furnishing the Performance Guarantee and signing of the contract.

38. Signing of Contract

38.1 Promptly after issuance of Letter of award, Procuring Agency shall send the successful Bidder the draft Contract, incorporating all terms and conditions as agreed by the parties to the contract.

38.2 Immediately after the Redressal of grievance by the GRC (if any), mandatory standstill period in accordance with Rule 35 of the Public Procurement Rules, 2004 and after fulfillment of all condition’s precedent of the Contract Form, the successful Bidder and the Procuring Agency shall sign the Contract.

39. Corrupt & Fraudulent Practices

39.1 Procuring Agencies (including beneficiaries of Government funded projects and procurement) as well as Bidders/Contractors under Government financed contracts, observe the highest standard of ethics during the procurement and execution of such contracts, and will avoid to engage in any corrupt and fraudulent practices.

F. Grievance Redressal & Complaint Review Mechanism

40. Constitution of Grievance Redressal

40.1 The Grievance Redressal Committee shall address the grievance, if any submitted by any party, including the bidder, in accordance with Rule 48 of the Public Procurement Rules, 2004 to be read with Redressal of Grievances Regulations, 2021.

40.2 In case if any party or the bidder is not satisfied with the decision of the GRC or if it fails to decide within ten days, the bidder or the party may file an appeal before the Appellate Committee of the Authority in accordance with Rule 48 of the Public Procurement Rules, 2004 to be read with Redressal of Grievances Regulations, 2021.

G. Mechanism of Blacklisting

41. Mechanism of Blacklisting

41.1 The Procuring Agency shall initiate blacklisting proceedings against any bidder, supplier, or contractor in accordance with the Mechanism for Blacklisting Regulations, 2024, read with Rule 19 of the Public Procurement Rules, 2004.

41.2 The blacklisted/debarred bidder may file the review petition before the Authority in accordance with Rule 19 of the Public Procurement Rules, 2004 to be read with Procedure of filing and disposal of Review Petitions Regulations, 2021.

📑 Bid Data Sheet (BDS)

Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Published on: Thursday, June 11, 2026 12:00 AM

Ref# : P45965

Bids Data Sheet (BDS)

The following specific data for the procurement of Goods to be procured shall complement, supplement, or amend the provisions in the Instructions to Bidders (ITB). Whenever there is a conflict, the provisions herein shall prevail over those in ITB.

BDS Clause Number
ITB Number
Amendments of, and Supplements to, Clauses in the Instruction to Bidders

A. Introduction

BDS Clause Number 1
ITB Number 1.1

Name of Procuring Agency: FEDERAL GOVERNMENT POLYCLINIC ISLAMABAD (FGPC-PGMI) (Federal Government Polyclinic (FGPC-PGMI))

The subject of procurement is: Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Expected commencement date: Monday, August 31, 2026

BDS Clause Number 2
ITB Number 2.1

Financial year for the operations of the Procuring Agency: 2026-27

Name and identification number of the Contract: P45965

BDS Clause Number 3
ITB Clause Number 3.1

JV/Consortium or Association Allowed: No
Number of JV/Consortium Members: Nil
see section of eligibility criteria.

B. Bidding Documents

BDS Clause Number 4
ITB Number 8.1

The Bidders may seek clarifications through EPADS v2.0 : Clarification Date: Wednesday, June 17, 2026

C. Preparation of Bids

BDS Clause Number 5
ITB Number 10.1

The Language of all correspondences and documents related to the Bids shall be in: English

List of documents required along with the bid:

Technical brochures/Literature brand country of origin of quoted item/material must be attached with the bid where applicable.
Quality Certifications. The products must comply with at least one or dual (specified in the specifications) of the following regulatory standards as required in technical specifications: (attached documentary of each quoted items/ equipment/s) a) FDA 510K b) CE (CE marked by conformity assessment bodies (CABs) notified in NANDO database under the relevant European directive for medical devices will be accepted only) c) MHLW d) In case of local instrument, CE or ISO13485 must be provided.
Under taking on company/bidder letterhead that bidder will provide sample and arrange demonstration of the quoted equipment if needed by the committee.

BDS Clause Number 6
ITB Number 11.1
Items/Lots and threre related documents:
See section items and Lots

BDS Clause Number 7
ITB Number 12.1

Items / Lots Specifications:

see section of items specifications.

BDS Clause Number 8
ITB Number 15.6

The price shall be Fixed.

BDS Clause Number 9
ITB Number 16.1

Currency of the Bids shall be : PKR

BDS Clause Number 10
ITB Number 17.1

The Bids/Bid Validity period shall be: 180 Days

BDS Clause Number 11
ITB Number 18.1

The amount of Bid Security shall be as defined in Bid Security Section for items and lots given in BDS 6
The Bid Security shall be in the form of: Pay Order, Call at Deposit

D. Submission of Bids

BDS Clause Number 12
ITB Number 20.1

Bid shall be submitted online on EPADS v2.0 whereas hard copy of the bid security should be submitted to the following;

FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory before bid submission deadline.

Bids that are not submitted on EPADS v2.0 shall be disqualified.

The deadline for Bids submission is: Friday, June 26, 2026 09:00 AM

E. Opening and Evaluation of Bids

BDS Clause Number 13
ITB Number 23.1

The Bids opening shall take place on EPADS v2.0.

Day : Friday

Date: Friday, June 26, 2026

Time : 09:30 AM

BDS Clause Number 14
ITB Number 31.1

Selection technique adopted will be: Least Cost Based Selection (LCBS)
see Evaluation Criteria

F. Review of Procurement Decisions

BDS Clause Number 15
ITB Number 41.1

Grievence against this procurement shall be submitted online on EPADS v2.0.

Arbitrator shall be appointed by mutual consent of the both parties.

Eligibility Criteria

Bidder's Type	Required Registration
Individual / Individual Consultant Sole Proprietorship Partnership Firm Company (Private Limited)	NADRA CITIZENSHIP (CNIC/NICOP) FBR (NTN) FBR (GSTN)

Bidder's Type

Required Registration

Individual / Individual Consultant

Sole Proprietorship

Partnership Firm

Company (Private Limited)

NADRA CITIZENSHIP (CNIC/NICOP)

FBR (NTN)

FBR (GSTN)

Eligibility Criteria	Document
Name of the Firm, Postal Address Telephone Number, Cell No.Fax # and Email address.	Yes
Name, Designation & specimen signature of owner/authorized person of the firm along with CNIC copies.	Yes
Distribution office/sub-office/warehouse/workshop in twin cities i.e. Rawalpindi & Islamabad	Yes
Authorization from Manufacturer or through its Sole Agent. In case of Distributor/sole agent the bidder must provide valid sole authorization certificate of all quoted product/s issued by the manufacturer or its exclusive sole agent. If manufacturer is directly applying he will attach prof of its manufacturer.	Yes
Technical Specification The bid must strictly comply with the advertised technical specifications of the quoted single item or complete package (as published in the tender). Any deviation from the specification of main equipment may result in straightaway rejection. However minor deviation in the accessories/instruments will be acceptable subject to the acceptance of procurement committee.	Yes
Quality Certifications. The products must comply with at least one or dual (specified in the specifications) of the following regulatory standards as required in technical specifications: (attached documentary of each quoted items/ equipment/s) a) FDA 510K b) CE (CE marked by conformity assessment bodies (CABs) notified in NANDO database under the relevant European directive for medical devices will be accepted only) c) MHLW d) In case of local instrument, CE or ISO13485 must be provide	Yes
Original brochure The firm must attach the brochure of all quoted Product/s along with its model that must be currently listed on the official website of the manufacturer.	Yes
Declaration of After-Sales Infrastructure Evaluation Declaration on letter head The infrastructure proposed by the bidder for after-sales services shall be evaluated for adequacy and compliance with the technical specifications and requirements outlined in the bidding documents. (committee can visit the office to evaluate if required)	Yes
Declaration of Accessories The bidder must clearly declare on letter head the make, model, and country of origin of all accessories included with the equipment other than main equipment.	Yes
Firm must have minimum one PEC Registered biomedical Engineer OR 01 PEC Professional Engineer (Electrical/Electronics) with 10 years’ experience.	Yes
Valid/updated document/s of manufacturer related to product.	Yes
The bidder will provide bank statement of last 03 (three) financial years (from 1st July to 30th June) i.e 2022-23, 2023-24 & 2024-25	Yes
The bidder will provide 03 years audit report of chartered accountant for the years 2022-23, 2023-24 & 2024-25.	Yes
The bidder/vendor should have minimum 03 years experience for supply of electro medical equipment to public sector hospitals/Tertiary care Hospitals independently or through International Agencies and NGO’s (attach documentary proof).	Yes
The bidder must provide/attach satisfactory performance certificate regarding supplies/ services of electro-medical equipment issued by the public sector hospitals/Tertiary care Hospitals	Yes
Affidavit of non-blacklisting. The bidder must submit an affidavit on stamp paper worth Rs. 100/- declaring that the firm has not been blacklisted by any Federal or Provincial Government department, or any public sector organization within Pakistan.	Yes
Ensures / undertakes on legally notarized stamp paper that it has no litigation(s) or arbitrary cases by any department, is not insolvent, in receivership, bankrupt or being penalized and its activities or affairs are not suspended or being administered under any Act, by a court or by a judicial officer.	Yes
Ensures / undertakes on legally notarized stamp paper that item/s will be delivered at FGPC by the bidder at its own expense. All freight/damages till final installation will be the responsibility of the vendor.	Yes
Ensures / undertakes on legally notarized stamp paper that the quoted product will be guaranteed/ warranted as per applicable rules.	Yes
Ensures / undertakes on legally notarized stamp paper that all documentation submitted with the bid is valid, authentic and genuine. No facts have been hidden and no forgery/false declaration has been made. If any such discrepancy is found at any stage, M/s ………….. Will be fully responsible for such miscommunication/ concealment of facts and will be liable for disciplinary action under PPRA Rules and tender TORs.	Yes
Ensures / undertakes on legally notarized stamp paper that the offered discount in the tender is not less than the offered discount in any other government hospital on same TOR’s. In case of any discrepancy found at any stage, the M/s………… will be bound to refund the excess amount through challan in government treasury or excess amount will be deducted from the outstanding bills/CDR.	Yes

Evaluation Criteria

Eligibile bidder(s) with substantially responsive bid(s) offering Least Cost Based Selection (LCBS) shall be consider for the award of contract(s).

Least Cost Based Selection (LCBS)

Technical Marks		193
Passing Marks		135
PEC Registered Engineer (Biomedical) (Quantitative)(Doc Required)
03 Biomedical Registered Engineers with valid PEC registration (Quantitative)(Doc Required)		15
02 Biomedical Registered Engineers with valid PEC registration (Quantitative)(Doc Required)		10
01 Biomedical Registered Engineers with valid PEC registration (Quantitative)(Doc Required)		5
Availability of proper workshop with proper tools (Attach pictorial evidence and along with list of tools/equipment)
Local Workshop in ICT/ Rawalpindi (Quantitative)(Doc Required)		10
workshop other than the mentioned cities (Quantitative)(Doc Required)		5
History of installation of Electromedical/bio-medical equipment only in public sector teaching Institute/Hospital. (Documentary evidence required, Experience of authorized distributor and exclusive sole distributor will also be considered.):
5-8 supply/installation (Quantitative)(Doc Required)		20
4-5 supply/installation (Quantitative)(Doc Required)		10
• 2-3 supply/installation (Quantitative)(Doc Required)		5
Vendor Past Performance of quoted equipment only in Public sector teaching Institute/Hospital. provision of performance report issued by the public sector teaching institution /hospitals regarding services/performance of quoted equipment.
Excellent performance (Quantitative)(Doc Required)		15
Very Good Performance (Quantitative)(Doc Required)		11
Good Performance (Quantitative)(Doc Required)		7
Satisfactory Performance (Quantitative)(Doc Required)		5
Financial Capability Assessed based on annual business turnover (supported by financial statements): Attach documentary evidence
Above 100 million (Quantitative)(Doc Required)		20
Above 50 million to 100 (Quantitative)(Doc Required)		15
20 to 50 million (Quantitative)(Doc Required)		10
DRAP Certification. DRAP Registration certificate:
Form 4 and form 8 (Quantitative)(Doc Required)		10
Form 4 (Quantitative)(Doc Required)		5
Bidder Experience in supplying medical equipment Attach documentary evidence
Above 4 years or above (Quantitative)(Doc Required)		10
3 to 4 years (Quantitative)(Doc Required)		5

Items/Lots

Items Without Lots :

Item	UNSPSC	Delivery Schedule	Quantity	Bid Security	Manufacturer / Dealer Authorization	Warranty
RESECTOSCOPE ADULT COMPLETE SET	Resectoscopes	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 3	3	120000	Any	3 Years
Cystoscope Set	Endoscope or instrument positioners or holders	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 3	3	90000	Any	3 Years
URETHRA TOME COMPLETE	Urethrotomes	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 3	3	90000	Any	3 Years
Uretero-renoscope SET	Ureteroscopes	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 2	2	80000	Any	3 Years
Holmium Laser	Holmium Ho	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 2	2	400000	Any	3 Years
Disposable fexible Reterorenscope	Diagnosis of congenital vesico-uretero-renal reflux	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 25	25	125000	Any	3 Years
Monitor and processor compatible with Disposable flexible ureterorenoscope	Diagnosis of congenital vesico-uretero-renal reflux	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 2	2	12000	Any	3 Years
Reusable Flexible Cystoscope	Endoscope or instrument positioners or holders	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 2	2	60000	Any	3 Years
Pediatric Cystcope,Resectoscope,Urethreteroscope	Resectoscopes	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 2	2	80000	Any	3 Years
4K ENDOSCOPIC CAMERA COMPLETE TOWER	Endoscopic/ laparoscopic/ arthroscopic trocar or sheath or obturator or cannula	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 1	1	200000	Any	3 Years
LED endoscopy light source	Endoscopic or surgical light sources	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 3	3	15000	Any	3 Years
Nephroscope	Nephroscopes	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 2	2	100000	Any	3 Years
Laproscope scope	Laparoscopes or laparoscopic telescopes	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 2	2	40000	Any	3 Years
Lithoclast (pneumatic)	Surgical lithotripters	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 1	1	40000	Any	3 Years
Flexible ureteral dilator set	Ureteral or urethral filiforms	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 2	2	4000	Any	3 Years
Flexible urethral dilator set s-curved	Urethral or ureteral followers	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 2	2	4000	Any	3 Years
Metallic uretheral dilators set	Urethral or ureteral followers	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 2	2	4000	Any	3 Years
EXTRA CORPOREAL SHOCK WAVE LITHOTRIPTER	Surgical lithotripters	Address: FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory Schedule: With in 120 days after issuance of Supply Order Quantity: 1	1	900000	Any	5 Years

Related Services of Goods:

Yes

Item	UNSPSC	Related Services
RESECTOSCOPE ADULT COMPLETE SET	Resectoscopes	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
Cystoscope Set	Endoscope or instrument positioners or holders	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
URETHRA TOME COMPLETE	Urethrotomes	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
Uretero-renoscope SET	Ureteroscopes	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
Holmium Laser	Holmium Ho	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
Disposable fexible Reterorenscope	Diagnosis of congenital vesico-uretero-renal reflux	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
Monitor and processor compatible with Disposable flexible ureterorenoscope	Diagnosis of congenital vesico-uretero-renal reflux	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
Reusable Flexible Cystoscope	Endoscope or instrument positioners or holders	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
Pediatric Cystcope,Resectoscope,Urethreteroscope	Resectoscopes	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
4K ENDOSCOPIC CAMERA COMPLETE TOWER	Endoscopic/ laparoscopic/ arthroscopic trocar or sheath or obturator or cannula	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
LED endoscopy light source	Endoscopic or surgical light sources	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
Nephroscope	Nephroscopes	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
Laproscope scope	Laparoscopes or laparoscopic telescopes	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
Lithoclast (pneumatic)	Surgical lithotripters	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
Flexible ureteral dilator set	Ureteral or urethral filiforms	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
Flexible urethral dilator set s-curved	Urethral or ureteral followers	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
Metallic uretheral dilators set	Urethral or ureteral followers	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.
EXTRA CORPOREAL SHOCK WAVE LITHOTRIPTER	Surgical lithotripters	Proper installation along with after sale services during warranty period along with the periodic maintenance during warranty period.

Items/Lot Specification

Items Without Lots :

Item: RESECTOSCOPE ADULT COMPLETE SET

UNSPSC: Resectoscopes

Specifications / Requirements:

RESECTOSCOPE ADULT COMPLETE SET
Sr.#	Description	Quantity
	Department: Urology Department
	Name: Resectoscope adult complete set (including outer sheath, inner sheath, visual obturator, working element, telescope 30°)
	Quantity: 03
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
5	Original Technical data sheet
	TECHNICAL PARAMETERS
	PARAMETERS AND CONDITIONS REQUIRED
1	Resectoscope Sheath, oblique beak, rotating inner sheath with ceramic insulation,
	Consisting of:
	i Inner Sheath 2 x
	i i Connecting Tube for In- and Outflow
	i i i 26 Fr sheaths for prostatic resection	1
	iv . 28 Fr sheaths for prostatic resection	1
	v. Deflecting Obturator
2	Stainless steel,
3	Continuous-flow design with irrigation ports
4	Rotating sheath/inner sheath and obturator for maneuverability
5	Autoclavable
6	Visual Obturator:
	Compatible with 26 Fr resectoscope sheath for working element of resectoscope	1
ii.	Compatible with 28Fr resectoscope sheath for working element of resectoscope	1
7	Working Elements:
i.	Compatible with 26 Fr resectoscope sheath Monopolar	1
ii.	Compatible with 28Fr resectoscope sheath Monopolar	1
iii.	Compatible with 26 Fr resectoscope sheath Bipolar	1
8	Tungsten or steel loop wires (reusable).
9	Removable cutting loop, ball electrode, and roller loop attachments.
10	Insulated to allow bipolar irrigation if needed
11	In all Working Elements, in Resting phase, loop should be out of the resectoscope sheath.
12	Telescope:
i.	Forward-Oblique Telescope 30°, diameter 4 mm, length 30 cm, autoclavable, fiber optic light transmission incorporated	1
13	Ellick evacuator 3-way bladder evacuator:
i.	Compatible with 26Fr Resectoscope	2
ii.	Compatible with 28Fr Resectoscope	2
14	Resectoscope Cutting loops:
i.	MONOPOLAR LOOPS : 24Fr	50
ii	MONOPOLAR LOOPS : 26Fr	50
iii.	BI-POLAR LOOPS : 24Fr	25
16	High Frequency Diathermy Leads:
i.	Compatible wigh Monopolar Working element	4
ii.	Compatible wigh Bipolar Working element	2
17	Materials & Sterilization:
i.	Wire Tray, for the cleaning, sterilization and storage of two rigid endoscopes and one light cable including holder for light post adaptors, silicone telescope holders and lid, external dimensions (w x d x h) : 487 x 125 x 54 mm for rigid endoscopes up to diameter 10 mm and working length 32 cm.
ii.	Medical-grade stainless steel (e.g. 316L) construction, Autoclavable, Made in Europe / Japan / US

Item: Cystoscope Set

UNSPSC: Endoscope or instrument positioners or holders

Specifications / Requirements:

Cystoscope Set
Sr.#	Description	Quantity
	Department : Urology Department
	Name: Cystoscope set (including, cystoscope sheath, bridge, obturator, telescope 30°, grasping forces, biopsy forceps)
	Quantity: 03
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
	TECHNICAL PARAMETERS
	PARAMETERS AND CONDITIONS REQUIRED
1	Rigid Cystoscope Set (22 Fr and 17 Fr, reusable) Outer sheaths:
	22 Fr (≈7.33 mm)	1
	17 Fr (≈5.67 mm)	1
	Sheaths made of medical-grade stainless steel (e.g. 316L) with smooth tapered tips
	Autoclavable ✓ Made in Germany / Europe
2	Telescopes (rod-lens)
i.	0° rod-lens telescopes (length ~30–35 cm) with high-quality glass optics.	1
ii	30° rod-lens telescopes (length ~30–35 cm) with high-quality glass optics.	1
iii.	ED (extra-low dispersion) glass for minimal chromatic aberration and HD resolution
iv.	Medical-grade stainless steel (e.g. 316L)
v.	Construction, Autoclavable, Made in Europe / Japan / US
3	Obturators: Rounded obturators for safe insertion, usable with
i.	22 Fr Cystoscope	1
ii.	17 Fr Cystoscope	1
iii.	Medical-grade stainless steel (e.g. 316L)
iv.	Construction, Autoclavable, Made in Europe / Japan / US
4	Cystoscope Bridge:
	i. Bridge with One working channel compatible with 22 Fr cystoscope to allow insertion of graspers or biopsy forceps. Suction valve optional for bladder evacuation (as in HD-model designs).	1
	ii. Bridge with One working channel compatible with 17 Fr cystoscope to allow insertion of graspers or biopsy forceps. Suction valve optional for bladder evacuation (as in HD-model designs).	1
	Medical-grade stainless steel (e.g. 316L) construction ✓ Autoclavable ✓ Made in Europe / Japan / US
5	Accessories: Includes:
	i. Light cable connectors standardized (ISO 594/1).
	ii. Flexible Biopsy Forceps [5 Fr (≈1.67 mm) biopsy grasping forceps compatible with 7 Fr channels.]	5
	iii. Grasping Forceps [5 Fr (≈1.67 mm) stone grasping forceps compatible with 7 Fr channels]	5
	iv. Medical-grade stainless steel (e.g. 316L) construction Autoclavable Made in Europe / Japan / US Albarran Bridge Compatible with rigid cystoscope sheaths in the range 17 Fr - 25 Fr (or equivalent)	1
6	Plastic Container, perforated, with transparent lid, with silicone mat, internal dimensions: 260 x 233 x 65 mm
7	Stone Punch with working element sheath, complete set

Item: URETHRA TOME COMPLETE

UNSPSC: Urethrotomes

Specifications / Requirements:

URETHROME COMPLETE
Sr.#	Description	Quantity
	Department : Urology Department
	Name: Urethrotome complete (including, half sheath, full sheath, working element, telescope zero°)
	Quantity: 03
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
5	Original Technical data sheet
	TECHNICAL PARAMETERS
	PARAMETERS AND CONDITIONS REQUIRED
1	Urethrotome (Cold Knife Urethrotome) Complete Sheath:
	i Outer half sheath.
	ii. Urethrotome sheath ~21–23 Fr (≈7.0–7.7 mm) with obturator and outer half sheath with 2 LUER-Lock cones
	Telescope:
	Straight forward telescope 0°, enlarged view, ø 4 mm, autoclavable, fiber optic light transmission incorporated	1
	Working Element:
	Atleast 5FR channel of urethrotome sheath
	✓ Compatible
	✓ For Cold knife, in Resting phase, Knife should be inside the sheath
	Cold Knife: straight, not to be used with HF current. Plastic Container, perforated, with transparent lid, with silicone mat, internal dimensions: 260 x 233 x 65 mm.	10
	Plastic Container, perforated, with transparent lid,
	with silicone mat, internal dimensions: 260 x 233 x 65 mm
	Materials:
	Compatible Medical-grade stainless steel (e.g. 316L) construction, Autoclavable, Made in Europe / Japan / US

Item: Uretero-renoscope SET

UNSPSC: Ureteroscopes

Specifications / Requirements:

Uretero-renoscope SET
Sr.#	Description	Quantity
	Department : Urology Department
	Name: Uretero-renoscope (Semirigid) (including two prong forceps and three pronge forceps 10 each)
	Quantity: 02
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
5	Original Technical data sheet
	TECHNICAL PARAMETERS
	PARAMETERS AND CONDITIONS REQUIRED
1	10-6 FR Semi rigid URS
	Insertion Aid
	Instrument Port with Sealing System and
	Quick Release Lock
	LUER-Lock Tube Connector, male
	LUER-Lock Tube Connector, with stopcock
	Seal, package of 10
	Flow Control Stopcock
	Wire Tray
	3-Grasping Forceps, for stone fragments, double action jaws, 4 Fr., rigid, length 60 cm,	3
	4-PEREZ CASTRO Forceps, long jaws for Steinstraße, rigid, double action jaws, 4 Fr., length 60 cm,	3
2	11-7.5 FR semi rigid URS
	7 Fr., 6°, length 43 cm,distal tip 6.5 Fr., instrument sheath 7 Fr., one-step, 9.9 Fr., autoclavable, with angled eyepiece, fiber optic light transmission incorporated,2 lateral irrigation ports and 1 working channel 4.8 Fr., for use with instruments up to 4 Fr,
	The following accessories are included in delivery:
	Uretero-Renoscope
	Insertion Aid
	Instrument Port with
	Sealing System and Quick Release Lock
	LUER-Lock Tube Connector, male
	LUER-Lock Tube Connector, with stopcock
	Seal, package of 10
	Flow Control Stopcock
	Wire Tray
	3-Grasping Forceps, for stone fragments, double action jaws, 4 Fr., rigid, length 60 cm	3
	4-PEREZ CASTRO Forceps, long jaws for Steinstraße, rigid, double action jaws, 4 Fr., length 60 cm	3

Item: Holmium Laser

UNSPSC: Holmium Ho

Specifications / Requirements:

Holmium Laser
Sr.#	Description
	Department : UROLOGY DEPARTMENT (Serial 5)
	Name: Holmium Laser 100 watt or higher
	Quantity: 02
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
5	Original Technical data sheet
	TECHNICAL SPECIFICATIONS
6	Holmium Laser 100 watt (Better or More)
	· Wavelength (2100 nm Holmium) (Better or More)
	· Average power (up to 105 W) (Better or More)
	· Energy per pulse (up to 5 J) (Better or More)
	· Repetition rate (up to 80 Hz) (Better or More)
	· Emission mode: Pulsed (pulse duration: 50 to 2000 µs) (Better or More)
	· Suggested settings (BPH – Lithotripsy – Soft tissue)
	· Pulse regulation
	· 12-inch Color Touch Screen (Better or More)
	· Moveable Screen
	· Double food switch with Ready/standby switch
	· Internal chiller
	· Save end user setting (Better or More)
	· Master PULSE and Vapor Tunnel
	· Automatic Aperture sensor
	· 7 pulse length modulations (Better or More)
	for each choice of Frequency and Energy, from very short to very long. (Better or More)
	· Vapor Tunnel and Virtual Basket included and by mode selection (Better or More)
	· Lithotripsy: Dusting High Frequency, Dusting vapor tunnel, pop corning, fragmentation (Better or More)
	· BPH: HOLEP, delicate areas, HOLAP, Coagulation, Soft Tissue
	Accessories
	1x foot pedal
	5xset of safety goggles
	5xfiber stripper
	5xfiber cutter
	1xinterlock connector
	10xblast shield
	1xpower supply cable
	Fibers
	· Smart fiber 200um (set of 5 fibers)
	· Smart fiber 272um (set of 5 fibers)
	· Smart fiber 365um (set of 5 fibers)
	· Smart fiber 550um (set of 5 fibers)
	· Smart fiber 800um (set of 5 fibers
	· Smart fiber 1000um (set of 5 fibers)
	· BALL TIP FIBERS 272um Single Use (Flexible scope), Qty 05
	· SIDE FIBERS 600um single used, Qty 05
	MORCELLATOR
	Wireless High-Performance motor with all standard items
	Blade length 350 mm (Better or More)
	Blade diameter (external) 4.5 mm (Better or More)
	Instruments
	Morcescope
	Outer and inner sheath
	Working element with laser channel (Better or More)
	Telescope 4mm, 30 Degree

Item: Disposable fexible Reterorenscope

UNSPSC: Diagnosis of congenital vesico-uretero-renal reflux

Specifications / Requirements:

Disposable fexible Reterorenscope
Sr.#	Description
	Department : Urology Department
	Name: Disposable flexible ureterorenoscope
	Quantity: 25
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
5	Original Technical data sheet
	TECHNICAL PARAMETERS
	PARAMETERS AND CONDITIONS REQUIRED
1	Deflection of distal tip 270°/270°,
	Direction of view 0°,
	Angle of view 88°,
	Working channel inner diameter 3.6 Fr.,
	Sheath size 7 Fr.,
	Working length 67 cm,
2	Consisting of:
	Ureteroscope Fiberscope Case
	Grasping Forceps
	Biopsy Forceps
	Leakage Tester
	Pressure Compensation Cap
	Cleaning Brush
	LUER-Adaptor
	Coagulating ball
	Cord
3	Stone Basket, nitinol, with tip, helical, 1.9 Fr., length 120 cm,4 wires, basket diameter 12 mm, sterile, for single use
	Coagulating Electrode, unipolar, 3 Fr., with cord.
	Seal, for Instrument Ports 27001G/GF/GH/GP, LUER-Adaptor 27014Y and 26252BS/BL, package of 10,single use recommended
4	Plastic Container, for Sterilization, specially suited for gas and hydrogen peroxide (Sterrad®) sterilization and storage, perforated, with lid, external dimensions (w x d x h): 550 x 260 x 90 mm.

Item: Monitor and processor compatible with Disposable flexible ureterorenoscope

UNSPSC: Diagnosis of congenital vesico-uretero-renal reflux

Specifications / Requirements:

MONITOR AND PROCESSOR
Sr.#	Description
	Department : Urology Department
	Name: Monitor and processor compatible with Disposable flexible ureterorenoscope
	Quantity: 02
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
7	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
10	Original Technical data sheet
	TECHNICAL PARAMETERS
	PARAMETERS AND CONDITIONS REQUIRED
1	Compatible with Flexible URS

Item: Reusable Flexible Cystoscope

UNSPSC: Endoscope or instrument positioners or holders

Specifications / Requirements:

Reusable Flexible Cystoscope
Sr.#	Description	Quantity
	Department : Urology Department
	Name: Reusable Flexible cystoscope with 2 Grasping forceps (Flexible), 1 biopsy forcep
	Quantity: 02
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
5	Original Technical data sheet
	TECHNICAL PARAMETERS
	PARAMETERS AND CONDITIONS REQUIRED
1	● Flexible video cystoscope
	● Dimensions:
	o ~16 Fr outer diameter ≈5.33 mm
	o 1 x ~7 Fr channel (≈2.33 mm)
	o Chip-on-tip CMOS camera for 4k image
	o Tip deflection ~210° up/140° down
	o Integrated LED illumination
	o Autoclavable design.
	● Working Channel:
	o Allows 5–7 Fr (≈1.67–2.33 mm) instruments
	o Provide atraumatic saline irrigation.
2	● Grasping Forceps
	o Flexible 5 Fr (≈1.67 mm) alligator forceps	5
	● Biopsy Forceps
	o 5 Fr rigid biopsy forceps	5
	● Autoclave unit for Flexible Cystoscope	1
	Materials:
	● Compatible
	● Autoclavable.

Item: Pediatric Cystcope,Resectoscope,Urethreteroscope

UNSPSC: Resectoscopes

Specifications / Requirements:

Pediatric Cystcope,Resectoscope,Urethreteroscope
Sr.#	Description
	Department : Urology Department
	Name: Pediatric cystoscope, resectoscope, urethreteroscope
	Quantity: 02
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
5	Original Technical data sheet
	TECHNICAL PARAMETERS
	PARAMETERS AND CONDITIONS REQUIRED
1	Pediatric Rigid Cystoscopes:
	● 1X Complete set including all Accessories
	Including:
	● Sheath
	● Obturator
	● bridge
	● 30 degree telescope
	Pediatric Urethrotomes
	● 1 x Complete set including all Accessories
	Including:
	● Sheath
	● Obturator
	● Working Element
	Pediatric Resectoscopes:
	● 1 x Complete set including all Accessories
	Including:
	● Insulation Sheath
	● Obturator
	● Working Element
	● 30 degree telescope
	● high freq lead
	● 10 x cutting loops / collens knife (variable shapes)

Item: 4K ENDOSCOPIC CAMERA COMPLETE TOWER

UNSPSC: Endoscopic/ laparoscopic/ arthroscopic trocar or sheath or obturator or cannula

Specifications / Requirements:

4K ENDOSCOPIC CAMERA COMPLETE TOWER
Sr.#	Description
	Department : UROLOGY
	Name: 4K ENDOSCOPIC CAMERA COMPLETE TOWER
	Quantity: 01
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
5	Original Technical data sheet
	TECHNICAL SPECIFICATIONS
1	CAMERA SYSTEM
	Full 4K resolution of 4096 x 2160
	With four times the resolution of regular, 4K technology gives sharpness a new
	meaning
	A complete solution from a single source
	4K provides a continuous chain of intelligent solutions –
	from the tip of the scope to the high resolution monitor, and everything in between.
	Brighter and sharper Endoscopes
	4K camera head
	Acquisition of FULL 4K resolution from three sensors
	Innovative 4K Camera Controller Integrated processing of the
	recorded image and video HD resolution
	Robust fusion light cables
	For improved illumination
	Extremely long-life and very quiet
	Bright, color-intense monitors With special tuning
	Full 4K resolution of 4096 x 2160 pixels for live display
	Integrated Special Imaging Modes (SIM): Digital algorithms for easier tissue
	differentiation
	Storage of high-resolution images and videos on USB storage media User-friendly
	Clinically developed presets for different disciplines
	4K Camera Control Unit
	4K Camera Controller Unit
	comprising:
	Full 4K Camera Controller , handheld remote control
	USB Flash Storage 32 GB , HDMI / HDMI cable interlock (Better or More)
	, power cable
	Touch Screen controller
	Built in Recording system, storage of high resolution images and Videos on
	USB storage media
	Intergraded special imaging modes for easier tissue differentiation
	Aspect ratio 16: 9 (Better or More)
	Special imaging modes
	PIP control via camera head
	control of recording system via camera head button
	4K Camera Head
	4K CAMERA HEAD 3x1/3 inch CMOS image sensor (Better or More)
	C-Mount, 3 chip, 2 programmable camera-head buttons, Sensor size: 1/3" (Better or More)
	Progressive Scan, 50 Hz, with 2 freely programmable (Better or More)
	Camera Head buttons, Each button with two functions
	Autoclavable
	Cable length 3.0 m (Better or more)
	Light sensitivity (max. gain) < 0,7 Lux (Better or More)
	Weight of camera head (without cable) min 130 g or more
	ZOOM LENS F 13-29MM C-Mount, Snap-On lock (Better or More)
	Medical graded 27" LCD MONITOR
	LCD MONITOR 4K 27'' (Better or More)
	Dual Monitor with one remote display on both simultaneously
	Brilliant visualization experience
	4K UHD resolution
	Light-intense, anti-glare OptiContrast PanelTM for vibrant and high-contrast images (Better or More)
	LED LIGHT SOURCE EQUAL TO 300 WATT (Better or More)
	FIBER LIGHT CABLE 3.5 MM (Better or More)
	INSUFFLATOR 45 lite /min complete with all standard accessories (Better or more)
	IMPORTED TROLLEY

Item: LED endoscopy light source

UNSPSC: Endoscopic or surgical light sources

Specifications / Requirements:

LED Endoscopy Light
Sr.#	Description
	Department : Urology Department
	Name: LED endoscopy light source
	Quantity: 03
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
5	Original Technical data sheet
	TECHNICAL PARAMETERS
	PARAMETERS AND CONDITIONS REQUIRED
1	Type:
	● High-power cold LED light source
	● 240W W or higher output (Better or More)
	● High-density LED array with color temperature ~5700–6000 K (daylight white). (Better or More)
	Output:
	● Continuous bright output
	● Adjustable intensity (0–100%) (Better or More)
	● Low-heat beam (cooler than xenon). (Better or More)
	Fiber Optics Light Cable
	● Standard 3.5–4.5 mm fiber coupling ports (Better or More)
	● Supplied with sterile light cables
	● Compatible with light source
	Controls:
	● On/off footswitch and/or knob
	● Cooling fan for thermal management.
	Safety/Standards:
	● Surge protection, auto-off for bulb protection.
	● RoHS/CE certification
	● No special sterilization (external device)
	● Use sterile light cable

Item: Nephroscope

UNSPSC: Nephroscopes

Specifications / Requirements:

Nephroscope
Sr.#	Description
	Department: Urology Department
	Name:18fr and 24fr Nephroscope with accessories
	Quantity: 02 (18Fr and 24Fr)
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
5	Original Technical data sheet
	TECHNICAL PARAMETERS
	PARAMETERS AND CONDITIONS REQUIRED
1	STANDARD PCNL Complete Set, 19cm LENGTH, SHEATH 24FR
	Accessories.
	Instrument Port
	LUER-Lock Tube Connector,
	Insertion Aid
	Silicone Leaflet Washer, package of 10
	Seal, package of 10
	Wire Tray
	Dilator SET 9 10 27 fr.
	Operating sheath, for the supine position, 24Fr. With obturator.
	Forceps, for grasping stone fragments and coagulation, with fenestrated jaws and U-spring handle, 11.5 Fr., length 38cms. Quantity - 5
	Forceps, for grasping larger stones and stone fragments, with triple serrated jaws and U-spring handle, 10.5 Fr., length 38 cm. Quantity - 5
	Lithoclast probes (10).
	Telescopic dilator set
	Single step dilator,22,24,26,28,fr
2	STANDARD PCNL Complete Set, 19cm LENGTH, SHEATH 18FR with Accessories

Item: Laproscope scope

UNSPSC: Laparoscopes or laparoscopic telescopes

Specifications / Requirements:

Laproscope scope
Sr.#	Description	Quantity
	Department : Urology Department
	Name: Laproscope scope 30 degree and Zero degree. Woth complete instruments set
	Quantity: 02
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
5	Original Technical data sheet
	TECHNICAL PARAMETERS
	PARAMETERS AND CONDITIONS REQUIRED
1	Telescopes:
	● Rigid laparoscopes (10 mm OD) with viewing angles:
	o 0°	1
	o 30°	1
	o 70° (and optional 12°)	1
	● Rigid laparoscope - 4 mm (used for pediatric)
	✔ Autoclavable
	stainless steel with ED glass for 4k cameras.
	Insufflator:
	● Integrated in tower
	Gas tubing (CO₂)
	Camera Compatibility:
	4K/HD camera coupler and light cable to connect telescope to tower.
	Accessories:
	● Complete laparoscopic tool set
	● Graspers	5
	● Dissectors	5
	● Scissors	5
	● Needle holders	5
	● Clip appliers	5
	● Retractors	5
	● Suction-irrigation	5
	● Cautery hook	5
	Trocars and Cannulas:
	● 10 mm trocars with bladeless and pyramidal tips	5
	● 5 mm trocars with bladeless and pyramidal tips	10
	⮚ Valves for insufflation (stopcocks)
	⮚ Sealing diaphragms for instrument passage
	⮚ Cannula lengths ~10–12 cm
	⮚ Stabilizing arm for central port
	⮚ lengths 33–45 cm
	5 mm and 10 mm diameters

Item: Lithoclast (pneumatic)

UNSPSC: Surgical lithotripters

Specifications / Requirements:

Lithoclast (pneumatic)
Sr.#	Description	Quantity
	Department : Urology Department
	Name: Lithoclast (pneumatic) complete
	Quantity: 01
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
5	Original Technical data sheet
	TECHNICAL PARAMETERS
	PARAMETERS AND CONDITIONS REQUIRED
1	System:
	● Combined lithotripter offering both concurrently:
	o Pneumatic (ballistic)
	o ultrasonic fragmentation	1
	● Footswitch (controls both modes)
	● Integrated vacuum suction (collects fragments)
	Pneumatic Module:
	● Air-driven projectile (up to ~10 bar gas pressure) for hard stones
	(Multiple probe sizes (2.4–4 mm) to couple into ultrasonic handpiece)
	Ultrasonic Module:
	● Piezoelectric or magnetostrictive at ~23–25 kHz for continuous fragmentation and suction of dust
	(Ultrasonic handpiece accepts pneumatic probes and has suction channel)
	Handpiece:	5
	● Lightweight ergonomic design for one-handed use
	● Suction adapter to improve fragment removal
	Performance:
	● Capable of fast “breakthrough” on hard calculus (bench tests faster than older models).
	● Regulates intensity via foot pedal.
	Accessories:
	● 1.5 m suction tubing
	● collection container
	● spare probe set.
	Sterilization:
	● Handpieces steam-sterilizable
	● Cables not immersible

Item: Flexible ureteral dilator set

UNSPSC: Ureteral or urethral filiforms

Specifications / Requirements:

Flexible ureteral dilator set
Sr.#	Description
	Department : Urology Department
	Name: Flexible ureteral dilator set
	Quantity: 02
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
5	Original Technical data sheet
	TECHNICAL PARAMETERS
	PARAMETERS AND CONDITIONS REQUIRED
1	Specifications:
	● Gradually tapered ureteral dilators or balloons for ureteral strictures.
	● Flexible polyimide or nylon tip for atraumatic dilation.
	Usage:
	● Inserted over a guidewire under vision (URS) or by fluoroscopy.
	Sizes:
	● Range ~4–12 Fr
	● A graduated set
	Balloon Dilators:
	● Semi-compliant balloons (4–12 mm Ø, 40–80 mm length) with dual-lumen catheter, inflatable with saline/contrast (for resistant strictures.)
	Accessories:
	● Size Specific Sterilization Tray

Item: Flexible urethral dilator set s-curved

UNSPSC: Urethral or ureteral followers

Specifications / Requirements:

Flexible urethral dilator set s-curved
Sr.#	Description
	Department : Urology Department
	Name: Flexible urethral dilator set s-curved
	Quantity: 02
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
5	Original Technical data sheet
	TECHNICAL PARAMETERS
	PARAMETERS AND CONDITIONS REQUIRED
1	Specifications:
	● Flexible S-shaped dilators to navigate male urethral curvatures
	● Smooth polished
	● Tapered tip
	● Marked with French sizes
	Sizes:
	● Range ~6–30 Fr
	● A graduated set
	Accessories:
	● Size Specific Sterilization Tray
	Usage:
	● For calyceal stricture dilation; gentle rotation to advance (Each dilator labeled by Fr size)

Item: Metallic uretheral dilators set

UNSPSC: Urethral or ureteral followers

Specifications / Requirements:

Metallic uretheral dilators set
Sr.#	Description
	Department : Urology Department
	Name: Metallic uretheral dilators set (bougies)
	Quantity: 02
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Three years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
5	Original Technical data sheet
	TECHNICAL PARAMETERS
	PARAMETERS AND CONDITIONS REQUIRED
1	Specifications:
	● Straight tapered rods with rounded tips
	● Smooth polished
	● Handle or knob grip; sheath if provided.
	Sizes:
	● Range ~6 Fr to 30 Fr
	● A graduated set (typically in 1–2 Fr increments)
	Accessories:
	● Size Specific Sterilization Tray

Item: EXTRA CORPOREAL SHOCK WAVE LITHOTRIPTER

UNSPSC: Surgical lithotripters

Specifications / Requirements:

EXTRA CORPOREAL SHOCK WAVE LITHOTRIPTER
Sr.#	Description
	Department : UROLOGY
	Name: EXTRA CORPOREAL SHOCK WAVE LITHOTRIPTER
	Quantity: 01
	Description
1	Brand
2	Make & Model
3	Quality Certification: any one certificate, as desired earlier in the bidding document under the heading of quality certification.
4	Warranty: Five years with all spare parts, during warranty period firm should maintain equipment by doing Planned Preventive Maintenance (PPM) as per principal recommendation and attending service call within 02 hours whenever called by end user. If any spare part required during installation or PPM will be responsibility of the firm.
5	Original Technical data sheet
	TECHNICAL SPECIFICATIONS
	ESWL system, with new generation electromagnetic shock wave source, Multimed EM, equipped with MOVABLE Iso-centric shock wave head, which enables user to change shock wave head in 4 different positions; such as, over and under table and their oblique positions, without changing focal point. This allows the user to choose ideal shock wave coupling position in order to increase the effectivity of the treatments.(Better or More)
	Due to modular, compact and computerized structure, can easily localize the stone precisely by using specially designed U-Arm fluoroscopy unit, Lithoscope or any standard C-Arm unit and computerized automatic ultrasonic localization robot arm, Lithoarm.(Better or More)
	Advantages
	· Compact
	· Affordable
	· Upgradable
	· Cost effective
	· Transportable
	· Anaesthesia free
	· Efficient and safe
	· Fully Computerized
	· Low installation cost
	· Low maintenance cost
	· Outpatient treatment
	· Short treatment time
	· Treats the stones in the kidney, entire ureter, bladder and elsewhere
	Technical Data (Main Unit)
	Energy Source: Electro – Magnetic system
	Focusing: Acoustic lens
	Patient Coupling :Membrane (Dry coupling)
	Localization: Fluoroscopy and/or Ultrasound
	Focal distance: 130 mm (Better or More)
	Focal dimensions: 7 x 66 mm (50% isobar dim.) (Better or More)
	Focal pressure: up to 700 Bar (Better or More)
	Operating Voltage: Variable 0 – 21 KV (Better or more)
	Frequency: Variable 40 – 150 shocks/min. (Better or More)
	Triggering Modes: Automatic,ECG, Respiratory and Manuel (optional)
	Water System: Closed loop circuit with water cushion
	Pressure regulation and 8.5 lt. Water capacity (Better or more)
	Urological Table
	Height : 850 to 1150 mm. (Better or more)
	Patient surface Width : 640 x 1950 mm (Better or more)
	Table supports width : 750 x 1250 mm (Better or more)
	Weight : 155 kg. (Better or more)
	Table Adjustment Limiting : Electronically adjustment in 3 - dimensions (Better or more)
	Vertical Movements : 300 mm. (Better or more)
	Longitudinal Movements : 100 mm (150 mm optional) (Better or more)
	Lateral Movements : 100 mm (150 mm optional) (Better or more)
	Tilting Lateral & Trendelenburg
	Lifting Capacity: 200 kg. (Better or more)
	Lithoscope
	Fluoroscopy Voltage: 40 –110 KV (Automatic Brightness Control) (Better or more)
	Fluoroscopy Current : 0.2 – 3.5 mA (ABC) two main selection (Better or more)
	Image Intensifier : 6” (7” –9” – 12” optional) (Better or more)
	X-Ray Tube : 0.6 – 1.5 mm (1.8 mm optional) focal spot (Better or more)
	Stationary anode, 40.000 HU (Better or more)
	TV Camera : High resolution CCD camera
	Monitor : 17” BW, 625/50 or 252/60 lines (Better or more)
	Height: 1830 mm (Better or more)
	Length: 1250 mm (Better or more)
	Width: 510 mm (Better or more)
	Weight: 225 kg (Better or more)
	Lithoarm
	Manipulator Type : Revolute type Articulated arm
	End effector : Ultrasound Probe holder
	Kinematics parameters : 7 links, 6 points and 5 angles (Better or more)
	Angle Sensor : Precision resistive angle sensors
	Stationary anode, 40.000 HU (Better or more)
	Software : 32- and 64-bit execution under Windows Xp, 7 & 8 (Better or more)
	Application : Adaptable to every kind of lithotripters
	General
	Main Supply: 230 or 115 VAC ± 10%50-60 Hz Single Phase
	Civil and Electrical/Mechanical (E&M) works for a room prepared for installation of medical equipment. The approximate size of the room is 15 ft x 13 ft.

Price Schedule

For Individual Items

#	Item Title	Quantity	Unit Price (PKR)	Total Price (PKR)	Delivery Location	Delivery Period / Year	Country of Origin
1
2

For Lots

#	Lot Title	Total Lot Price (PKR)	Country of Origin
1	[Lot 1 Title]

📑 General Conditions of Contract (GCC)

Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Published on: Thursday, June 11, 2026 12:00 AM

Ref# : P45965

A. General

1. Definitions

1.1 Unless the context otherwise requires, the following terms whenever used in this Contract shall have the same meaning and shall be interpreted as indicated

“Applicable Law” means the laws and any other instruments having the force of law in the Government’s Country, or in such other country as may be specified in the Special Conditions of the Contract (SC), as they may be issued and in force from time to time;
“Procuring Agency” means:-
1. any Ministry, Division, Department or any Office of the Government;
2. any authority, corporation, body or organization established by or under a Law or which is owned or controlled by the Government;.
“The Contract” means an agreement enforceable by law;
“The Contract Price” means the price payable to the Bidder under the Contract for the full and proper performance of its contractual obligations;
“Ancillary Services” means those services ancillary to the provision of Goods, such as transportation and insurance, and any other incidental services, such as installation, commissioning, provision of technical assistance, training, and other such obligations of the Bidder covered under the Contract;
“GCC” means the General Conditions of Contract contained in this section;
“SCC” means the Special Conditions of Contract by which the GCC may be amended or supplemented;
“Day” means calendar day unless indicated otherwise.
“Effective Date” means the date on which this Contract comes into force and effect.
The Bidder” means the individual or corporate body whose Bids to provide the Goods has been accepted by the Procuring Agency;
“The Project Site,” where applicable, means the place or places named in Bids Data Sheet and technical Specifications;
“Government” means the Government of Pakistan;
“Subcontractor” means any entity to which the Bidder subcontracts any part of the Goods.
"Service" means any object of procurement other than goods or works;
“Party” means the Procuring Agency or the Bidder, as the case may be, and “Parties” means both of them;
“Foreign Currency” means any currency other than the currency of the country of the Procuring Agency;
“Completion Date” means the date of completion of the contract by the Bidder as certified by the Procuring Agency;
“In Writing” means communicated in written form with proof of receipt;
“Local Currency” means the currency of Pakistan;

2. Application and Interpretation

2.1 These General Conditions shall apply to the extent that they are not superseded by provisions of other parts of the Contract.

2.2 In interpreting these Conditions of Contract headings and marginal notes are used for convenience only and shall not affect their interpretations unless specifically stated; references to singular include the plural and vice versa; and masculine include the feminine. Words have their ordinary meaning under the language of the Contract unless specifically defined.

3. Applicable Law

3.1 The contract shall be governed and interpreted in accordance with the laws of Pakistan, unless otherwise specified in SCC.

4. Governing Language

4.1 The Contract as well as all correspondence and documents relating to the Contract exchanged between the Bidder and the Procuring Agency, shall be written in the English language unless otherwise stated in the SCC. Supporting documents and printed literature that are part of the Contract may be in another language provided these are accompanied by an accurate translation of the relevant passages in English, in which case, for purposes of interpretation of the Contract, this translation shall govern.

5. Notices

5.1 Any notice, request, or consent made pursuant to this Contract shall be in writing and shall be deemed to have been made when delivered in person to an authorized representative of the Party to whom the communication is addressed, or when sent by registered mail, telex, telegram, or facsimile to such Party at the address specified in the SCC.

6. Delivery/Location

6.1 The Goods shall be delivered to such locations as the Procuring Agency may approve and as specified in SCC.

7. Authorized Representatives / Authority of Member in charge

7.1 Any action required or permitted to be taken, and any document required or permitted to be executed, under this Contract by the Procuring Agency or the Bidder may be taken or executed by the officials specified in the SCC.

B. Commencement, Completion, Modification, and Termination of Contract

8. Effectiveness of Contract

8.1 This Contract shall come into effect on the date the Contract is signed by both parties and such other later date as may be stated in the SCC.

9. Commencement of Services

9.1 The Bidder shall confirm availability of Key Experts and begin carrying out the Services not later than the number of days after the Effective Date specified in the SCC.

10. Program

10.1 Before commencement of the Services, the Bidder shall submit to the Procuring Agency for approval a Program showing the general methods, arrangements, order and timing for all activities. The Services shall be carried out in accordance with the approved Program as updated.

11. Starting Date/Expiration Date

11.1 The Bidder shall start carrying out the Services Five (05) days after the date the Contract becomes effective, or at such other date as may be specified in the SCC.

11.2 Unless terminated earlier pursuant to Clause GCC 15 hereof, this Contract shall expire at the end of such time period after the Effective Date as specified in the SCC.

12. Entire Agreement

12.1 This Contract contains all covenants, stipulations and provisions agreed by the Parties. No agent or representative of either Party has authority to make, and the Parties shall not be bound by or be liable for, any statement, representation, promise or agreement not set forth herein.

13. Modification

13.1 Any modification or variation of the terms and conditions of this Contract, including any modification or variation of the scope of the Services, may only be made by written agreement between the Parties. However, each Party shall give due consideration to any Bids for modification or variation made by the other Party.

13.2 In cases of any modifications or variations, the prior written consent of the Procuring Agency is required.

14. Force Majeure

14.1 Definition

For the purposes of this Contract, “Force Majeure” means an event which is beyond the reasonable control of a Party and which makes a Party’s performance of its obligations under the Contract impossible or so impractical as to be considered impossible under the circumstances.

14.2 No Breach of Contract

The failure of a Party to fulfill any of its obligations under the contract shall not be considered to be a breach of, or default under, this Contract in so far as such inability arises from an event of Force Majeure, provided that the Party affected by such an event (a) has taken all reasonable precautions, due care and reasonable alternative measures in order to carry out the terms and conditions of this Contract, and (b) has informed the other Party as soon as possible about the occurrence of such an event.

14.3 Extension of Time

Any period within which a Party shall, pursuant to this Contract, complete any action or task, shall be extended for a period equal to the time during which such Party was unable to perform such action as a result of Force Majeure.

14.4 Payments

During the period of their inability to perform the Services as a result of an event of Force Majeure, the Bidder shall be entitled to continue to be paid under the terms of this Contract, as well as to be reimbursed for additional costs reasonably and necessarily incurred by them during such period for the purposes of the Services and in reactivating the Service after the end of such period.

15. Termination

15.1 By the Procuring Agency

The Procuring Agency may terminate this Contract in case of the occurrence of any of the events specified in paragraphs (a) through (e) of this Clause. In such an occurrence the Procuring Agency shall give at least thirty (30) calendar days’ written notice of termination to the Bidder in case of the events referred to in (a) through (d); at least sixty (60) calendar days’ written notice in case of the event referred to in (e);

If the Bidder fails to remedy a failure in the performance of its obligations hereunder, as specified in a notice of suspension;
If the Bidder becomes (or, if the Bidder consists of more than one entity, if any of its members becomes) insolvent or bankrupt or enter into any agreements with their creditors for relief of debt or take advantage of any law for the benefit of debtors or go into liquidation or receivership whether compulsory or voluntary;
If the Bidder fails to comply with any final decision reached as a result of arbitration proceedings;
If, as the result of Force Majeure, the Bidder is unable to perform a material portion of the Services for a period of not less than sixty (60) calendar days;
If the Procuring Agency, in its sole discretion and for any reason whatsoever, decides to terminate this Contract;

15.2 By the Bidder

The Bidder may terminate this Contract, by not less than thirty (30) calendar days’ written notice to the Procuring Agency, in case of the occurrence of any of the events specified in paragraphs (a) through (d) of this Clause.

If the Procuring Agency fails to pay any money due to the Bidder pursuant to this Contract and not subject to dispute within forty-five (45) calendar days after receiving written notice from the Bidder that such payment is overdue.
If, as the result of Force Majeure, the Bidder is unable to perform a material portion of the Services for a period of not less than sixty (60) calendar days.
If the Procuring Agency fails to comply with any final decision reached as a result of arbitration.
If the Procuring Agency is in material breach of its obligations pursuant to this Contract and has not remedied the same within forty-five (45) days (or such longer period as the Bidder may have subsequently approved in writing) following the receipt by the Procuring Agency of the Bidder’s notice specifying such breach.

C. Obligations of the Bidder

16. General

16.1 Standard of Performance

The Bidder shall deliver the product and carry out the Services with all due diligence, efficiency and economy, in accordance with generally accepted professional standards and practices, and shall observe sound management practices, and employ appropriate technology and safe and effective equipment, machinery, materials and methods. The Bidder shall always act, in respect of any matter relating to this Contract or to the Services, as a faithful adviser to the Procuring Agency, and shall at all times support and safeguard the Procuring Agency’s legitimate interests in any dealings with the third parties.

16.2 Law Applicable to Goods

The Bidder shall deliver the goods in accordance with the Contract and in accordance with the Law of Pakistan and shall take all practicable steps to ensure that any of its Experts and Sub-Bidders, comply with the Applicable Law.

17. Conflict of Interests

17.1 Bidder Not to Benefit from Commissions and Discounts.

The remuneration of the Bidder shall constitute the Bidder’s sole remuneration in connection with this Contract or the Services, and the Bidder shall not accept for their own benefit any trade commission, discount, or similar payment in connection with activities pursuant to this Contract or to the Services or in the discharge of their obligations under the Contract, and the Bidder shall use their best efforts to ensure that the Personnel, any Subcontractors, and agents of either of them similarly shall not receive any such additional remuneration.

17.2 Bidder and Affiliates Not to be Otherwise Interested in Project

The Bidder agree that, during the term of this Contract and after its termination, the Bidder and its affiliates, as well as any Subcontractor and any of its affiliates, shall be disqualified from providing Goods for any project resulting from or closely related to the Services.

17.3 Prohibition of Conflicting Activities

Neither the Bidder nor its Subcontractors nor the Personnel shall engage, either directly or indirectly, in any of the following activities:

during the term of this Contract, any business or professional activities in the Government’s country which would conflict with the activities assigned to them under this Contract;
during the term of this Contract, neither the Bidder nor their Subcontractors shall hire public employees in active duty or on any type of leave, to perform any activity under this Contract;

18. Confidentiality

18.1 Except with the prior written consent of the Procuring Agency, the Bidder and the Experts shall not at any time communicate to any person or entity any confidential information acquired in the course of the contract.

19. Insurance to be Taken Out by the Bidder

19.1 The Bidder(a) shall take out and maintain, and shall cause any Subcontractors to take out and maintain, at its (or the Subcontractors’, as the case may be) own cost but on terms and conditions approved by the Procuring Agency, insurance against the risks, loss or damage, and for the coverage, as shall be specified in the SCC; and (b) at the Procuring Agency’s request, shall provide evidence to the Procuring Agency showing that such insurance has been taken out and maintained and that the current premiums have been paid.

20. Bidder’s Actions Requiring Procuring Agency’s Prior Approval

20.1 The Bidder shall obtain the Procuring Agency’s prior approval in writing before taking any of the following actions:

(a) appointing such members of the Personnel not provided by the Bidder;

(b) changing the Program of activities; and

21. Reporting Obligations

21.1 The Bidder shall submit to the Procuring Agency the reports and documents in the numbers, and within the periods as prescribed by the Procuring Agency.

22. Liquidated Damages

22.1 If the Supplier fails to deliver any or all of the Goods or to perform the Services within the period(s) specified in the Contract, the Procuring Agency shall, without prejudice to its other remedies under the Contract, deduct from the Contract Price, as liquidated damages, a sum equivalent to the percentage specified in SCC of the delivered price of the delayed Goods or unperformed Services for each week or part thereof of delay until actual delivery or performance, up to a maximum deduction of the performance security (or guarantee) specified in SCC. Once the said maximum is reached, the Procuring Agency may consider termination of the Contract pursuant to GCC Clause 15.

22.2 Correction for Over-payment

If the Intended Completion Date is extended after liquidated damages have been paid, the Procuring Agency shall correct any overpayment of liquidated damages by the Bidder by adjusting the next payment certificate. The Bidder shall be paid interest on the overpayment, calculated from the date of payment to the date of repayment, at the rates specified in SCC.

22.3 Lack of performance penalty

If the Bidder has not corrected a Defect within the time specified in the Procuring Agency’s notice, a penalty for Lack of performance will be paid by the Bidder. The amount to be paid will be calculated as a percentage of the cost of having the Defect corrected, assessed as specified in the SCC.

23. Performance Guarantee

23.1 Within Seven (07) days from the issuance of acceptance letter from the Procuring Agency, the successful Bidder shall furnish the Performance Guarantee in shape of ------- at the discretion of the PA in the amount specified in SCC. In case the amount of Bids security is equal or greater than

23.2 The proceeds of the Performance Guarantee shall be payable to the Procuring agency as compensation for any loss resulting from the Supplier’s failure to complete its obligations under the Contract.

23.3 The Performance Guarantee shall be denominated in the currency of the Contract, or in a freely convertible currency acceptable to the Procuring agency and shall be in the acceptable form as specified in SCC.

23.4 The Performance Guarantee will be discharged by the Procuring agency and returned to the Supplier not later than thirty (30) days following the date of completion of the Supplier’s performance obligations under the Contract, including any warranty obligations, unless otherwise specified in SCC.

24. Fraud and Corruption

24.1 The Procuring Agency requires the Supplier to disclose any commissions or fees that may have been paid or are to be paid to agents or any other party with respect to the Bidding process or execution of the Contract. The information disclosed must include at least the name and address of the agent or other party, the amount and currency, and the purpose of the commission, gratuity or fee.

25. Sustainable Procurement

25.1 The Bidder shall conform to the sustainable procurement contractual provisions, if and as specified in the SCC.

D. Bidder’s Personnel

26. Description of Personnel

26.1 The titles, agreed job descriptions, minimum qualifications, and estimated periods of engagement in the carrying out of the Services of the Bidder’s Key Personnel. The Key Personnel listed by title as well as by name are hereby approved by the Procuring Agency.

27. Removal and/or Replacement of Personnel

27.1 Except as the Procuring Agency may otherwise agree, no changes shall be made in the Key Personnel. If, for any reason beyond the reasonable control of the Bidder, it becomes necessary to replace any of the Key Personnel, the Bidder shall provide as a replacement a person of equivalent or better qualifications.

27.2 If the Procuring Agency finds that any of the Personnel have (i) committed serious misconduct or have been charged with having committed a criminal action, or (ii) have reasonable cause to be dissatisfied with the performance of any of the Personnel, then the Bidder shall, at the Procuring Agency’s written request specifying the grounds thereof, provide as a replacement a person with qualifications and experience acceptable to the Procuring Agency.

27.3 The Bidder shall have no claim for additional costs arising out of or incidental to any removal and/or replacement of Personnel.

E. Obligations of the Procuring Agency

28. Assistance and Exemptions

28.1 The Procuring Agency shall use its best efforts to ensure that the Government shall provide the Bidder such assistance and exemptions as specified in the SCC.

29. Change in the Applicable Law

29.1 If, after the date of this Contract, there is any change in the Applicable Law with respect to taxes and duties which increases or decreases the cost of the related Services rendered by the Bidder, then the remuneration and reimbursable expenses otherwise payable to the Bidder under this Contract shall be increased or decreased accordingly by agreement between the Parties, and corresponding adjustments shall be made to the amounts referred in the SCC.

30. Services and Facilities

30.1 The Procuring Agency shall make available to the Bidder and the Experts, for the purposes of the Services and free of any charge, the services, facilities and property described , at the times and in the manner specified in the SCC or terms of reference.

30.2 In case that such services, facilities and property shall not be made available to the Bidder, the Parties shall agree on (i) any time extension that it may be appropriate to grant to the Bidder for the performance of the Services, (ii) the manner in which the Bidder shall procure any such services, facilities and property from other sources, and (iii) the additional payments, if any, to be made to the Bidder as a result thereof.

F. Payments to the Bidder

31. Contract Price

31.1 The price payable shall be in Pakistani Rupees unless otherwise specified in the SCC. Prices charged by the Supplier for Goods delivered under the Contract shall not vary from the prices quoted by the Supplier in its Bid.

32. Terms and Conditions of Payment

32.1 Payments will be made to the Bidder according to the payment schedule stated in the SCC and as per actual invoice submitted by the Bidder.

32.2 Unless otherwise stated in the SCC, the advance payment shall be made against the provision by the Bidder of a bank guarantee for the same amount, and shall be valid for the period stated in the SCC. Any other payment shall be made after the conditions listed in the SCC for such payment have been met, and the Bidder have submitted an invoice to the Procuring Agency specifying the amount due.

33. Currency of Payment

33.1 Any payment under this Contract shall be made in the currency(ies) specified in the SCC.

G. Quality Control

34. Identifying Defects

34.1 The principle and modalities of Inspection of the Goods by the Procuring Agency shall be as indicated in the SCC. The Procuring Agency shall check the Bidder’s performance and notify him of any Defects that are found. Such checking shall not affect the Bidder’s responsibilities. The Procuring Agency may instruct the Bidder to search for a Defect and to uncover and test any service that the Procuring Agency considers may have a Defect. Defect Liability Period is as defined in the SCC.

35. Correction of Defects,and

Lack of Performance Penalty

35.1 The Procuring Agency shall give notice to the Bidder of any Defects before the end of the Contract. The Defects liability period shall be extended for as long as Defects remain to be corrected.

35.2 Every time notice a Defect is given, the Bidder shall correct the notified Defect within the length of time specified by the Procuring Agency’s notice.

35.3 If the Bidder has not corrected a Defect within the time specified in the Procuring Agency’s notice, the Procuring Agency will assess the cost of having the Defect corrected, the Bidder will pay this amount, and a Penalty for Lack of Performance.

36. Taxes and Duties

36.1 A Supplier shall be entirely responsible for all taxes, duties, fees, etc., incurred until delivery of the contracted Goods to the Procuring Agency.

H. Settlement of Disputes

37. Alternate Dispute Resolution

37.1 The disputes between the parties to the contract may be settled in accordance with Public Procurement Rules, 2004.

37.2 The procuring agency shall refer the matter to the Chief Justice Islamabad High Court or Managing Director PPRA or the Secretary Ministry of Law & Justice for appointment of Arbitrator.

37.3 The fee for the Arbitrator shall be specified in Pak Rupees as determined by the appointing authority which shall be borne and shared equally by the contracting parties.

📑 Special Conditions of Contract (SCC)

Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Published on: Thursday, June 11, 2026 12:00 AM

Ref# : P45965

SECTION VIII. SPECIAL CONDITIONS OF CONTRACT

The following Special Conditions of Contract shall supplement the General Conditions of Contract. Whenever there is a conflict, the provisions herein shall prevail over those in the Conditions of Contract. The corresponding clause number of the GCC is indicated in parentheses.

Number of GC Clause

Amendments of, and Supplements to, Clauses in the General Conditions of Contract

Number of GC Clause 1

Definitions

The Procuring Agency is: FEDERAL GOVERNMENT POLYCLINIC ISLAMABAD (FGPC-PGMI) (Federal Government Polyclinic (FGPC-PGMI)), Joint Executive Director FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory

The Supplier is:

The title of the subject procurement is: Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Number of GC Clause 3

Applicable/Governing Law:

The Contract shall be interpreted in accordance with the laws of Islamic Republic of Pakistan

Number of GC Clause 4

Language:

The language of the Contract, all correspondence and communications to be given, and all other documentation to be prepared and supplied under the Contract shall be in English.

Number of GC Clause 5

Notices:

The addresses for the notices are:

Procuring Agency:

Contractor/ Bidder:

[Name, address and telephone number].

The Contractor/ Bidder’s Representative(s)

[Name, address, telephone number and e-mail address]

Number of GC Clause 7.1

The Authorized Representatives are:

For the Procuring Agency:

For the Bidder:

Name: ………………………

Designation: ……………..

Address: ……………………………..

Number of GC Clause 8

Effectiveness of the contract

Number of GC Clause 9

Commencement of Contract:

Number of GC Clause 11.2

Expiration of Contract:

Number of GC Clause 15

Termination

In the event of termination of the contract due to any reason as already defined in the General Conditions of Contract, the Bidder shall be responsible for providing to the Authority the Goods till the time of alternate arrangements.

Number of GC Clause 17

Conflict of Interest:

The Procuring Agency reserves the right to determine on a case-by-case basis whether the Bidder should be disqualified from providing goods or services due to a conflict of a nature described in Clause GCC 17.

Number of GC Clause 22

Liquidated Damages

If the Bidder fails to provide services as required under the contract or in case of any data loss/data breach or any incident compromising the data security or other such failures related to any services, the Bidder shall pay to the Procuring Agency as Liquidated Damages at a rate of 0.10% to 2.00% of the Contract value, in accordance with the extent of performance failure & the cost of investigating such incidents as judged by the Authority.

Number of GC Clause 23

Performance Guarantee:

The amount of performance guarantee shall be 3.00% of the contract price in acceptable form of Pay Order, Call at Deposit

Number of GC Clause 32

Payment terms:

Payment will be made to the Bidder against the procured Goods and services according to the actual invoice or running bills submitted by the Bidder against the services provided within the time given in the conditions of the contract.

Number of GC Clause 33

Currency of Payment:

All the payment to be released to the contractor/Bidder shall be in Pakistani Rupees.

Number of GC Clause 34

Identifying Defects:

The Authority reserves the right at any time to inspect the premises of the provider to inspect the goods and monitor the goods being provided.

Inspections & Tests Requirements

For being Brand New, bearing relevant reference numbers of the equipment (Certificate from supplier)

For Physical Fitness having No Damages (Certificate from supplier)

For the Country of Origin as quoted by the Supplier (Certificate from manufacturer)

For conformance to specifications and performance parameters by the end user

For successful operation at site after complete installation, testing and commissioning of the equipment (Installation, Testing and Commissioning Report by End user)

Delivery & Documents

Copies of the Supplier’s invoice showing Goods’ description, quantity, unit price, and total amount;

Original and two copies of the usual transport document (for example, a negotiable bill of lading, a non-negotiable sea waybill, an inland waterway document, an air waybill, a railway consignment note, a road consignment note, or a multimodal transport document) which the buyer may require to take the goods;

Copies of the packing list identifying contents of each package;

Manufacturer’s or Supplier’s Valid Warranty Certificate;

Certificate of Origin.

Number of GC Clause 37

Following is the guidance for Dispute Resolution

If any dispute of any kind whatsoever shall arise between the Authority and the Bidder in connection with or arising out of the Contract, including without prejudice to the generality of foregoing, any question regarding its existence, validity, termination and the execution of the Contract – whether during developing phase or after their completion and whether before or after the termination, abandonment or breach of the Contract – the parties shall seek to resolve any such dispute or difference by mutual diligent negotiations in good faith within 14 (fourteen) days following a notice sent by one Party to the other Party in this regard.
At future of negotiation the dispute shall be resolved through mediation and mediator shall be appointed with the mutual consent of the both parties.
At the event of failure of mediation to resolve the dispute relating to this contract such dispute shall finally be resolved through binding Arbitration by sole arbitrator in accordance with Arbitration Act 1940. The arbitrator shall be appointed by mutual consent of the both parties. The Arbitration shall take place in Islamabad, Pakistan and proceedings will be conducted in English language.
The cost of the mediation and arbitration shall be shared by the parties in equal proportion however the both parties shall bear their own costs and lawyer’s fees regarding their own participation in the mediation and arbitration. However, the Arbitrator may make an award of costs upon the conclusion of the arbitration making any party to the dispute liable to pay the costs of another party to the dispute.
Arbitration proceedings as mentioned in the above clause regarding resolution of disputes may be commenced prior to, during or after completion of the contract.

Notwithstanding any reference to the arbitration herein, the parties shall continue to perform their respective obligations under the Contract unless they otherwise agree that the Authority shall pay the Bidder any monies due to the Bidder.

Rules of procedure for arbitration proceedings:

Any dispute between the Authority and a Bidder who is a national of the Islamic Republic of Pakistan arising in connection with the present Contract shall be referred to adjudication or arbitration in accordance with the laws of the Islamic Republic of Pakistan including Arbitration Act 1940, however above provision shall prevail in referring the case to the Arbitrator.

Place of Arbitration and Award:

The arbitration shall be conducted in English language and place of arbitration shall be at Islamabad. The award of the arbitrator shall be final and shall be binding on the parties.

📑 Bid Securing Declaration (BSD)

Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Published on: Thursday, June 11, 2026 12:00 AM

Ref# : P45965

Form 9: Bid Securing Declaration

Date: [insert date (as day, month and year)]

Bid No.:P45965

To: FEDERAL GOVERNMENT POLYCLINIC ISLAMABAD (FGPC-PGMI) (Federal Government Polyclinic (FGPC-PGMI)), Joint Executive Director FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory

We, the undersigned, declare that:

We understand that, according to your conditions, Bids must be supported by a Bid Securing Declaration.

We accept that we will be blacklisted and henceforth cross debarred for participating in respective category of public procurement proceedings for a period of (not more than) six months, if fail to abide with a bid securing declaration, however without indulging in corrupt and fraudulent practices, if we are in breach of our obligation(s) under the Bid conditions, because we:

have withdrawn or modified our Bid during the period of Bid Validity specified in the Form of Bid;
Disagreement to arithmetical correction made to the Bid price; or
having been notified of the acceptance of our Bid by the Procuring Agency during the period of Bid Validity, (i) failure to sign the contract if required by Procuring Agency to do so or (ii) fail or refuse to furnish the Performance Security or to comply with any other condition precedent to signing the contract specified in the Bidding Documents.

We understand this Bid Securing Declaration shall expire if we are not the successful

Bidder, upon the earlier of (i) our receipt of your notification to us of the name of the successful Bidder; or (ii) twenty-eight (28) days after the expiration of our Bid.

📑 Contract Form (CNF)

Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Published on: Thursday, June 11, 2026 12:00 AM

Ref# : P45965

SECTION IX: CONTRACT FORMS

THIS AGREEMENT made the _____ day of __________ 20_____ between FEDERAL GOVERNMENT POLYCLINIC ISLAMABAD (FGPC-PGMI) (Federal Government Polyclinic (FGPC-PGMI)), Joint Executive Director FEDERAL GOVERNMENT POLYCLINIC (PGMI) G-6/2, ISLAMABAD, Islamabad Capital Territory

(hereinafter called “the Procuring Agency”) of the one part and [name of Bidder] of [city and country of Bidder] (hereinafter called “the Bidder”) of the other part:

WHEREAS the Procuring Agency invited Bids for provision of goods, viz., Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27. (P45965) and has accepted a Bids by the Bidder for the provision of Goods in the sum of [contract price in words and figures] (hereinafter called “the Contract Price”).

NOW THIS CONTRACT WITNESSETH AS FOLLOWS:

1. In this Contract words and expressions shall have the same meanings as are respectively assigned to them in the Conditions of Contract referred to.

2. The following documents shall be deemed to form and be read and construed as part of this Contract, In the event of any ambiguity or conflict between the Contract Documents listed below, the order of precedence shall be the order in which the Contract Documents are listed below:-

This form of Contract;
the Form of Bids and the Price Schedule submitted by the Bidder;
the Schedule of Requirements;
the Technical Specifications;
the Special Conditions of Contract;
the General Conditions of the Contract;
the Procuring Agency’s Letter of Acceptance; and
[add here: any other documents]

3. In consideration of the payments to be made by the Procuring Agency to the Bidder as hereinafter mentioned, the Bidder hereby covenants with the Procuring Agency to provide the Goods related services and to remedy defects therein in conformity in all respects with the provisions of the Contract.

4. The Procuring Agency hereby covenants to pay the Bidder in consideration of the provision of Goods and the remedying of defects therein, the Contract Price or such other sum as may become payable under the provisions of the contract at the times and in the manner prescribed by the contract.

IN WITNESS whereof the parties hereto have caused this Contract to be executed in accordance with their respective laws the day and year first above written.

Signed, sealed, delivered by __________________the ________________ (for the Procuring Agency)

Witness to the signatures of the Procuring Agency:

………………………………………………

Signed, sealed, delivered by __________________the ________________ (for the Procuring Agency)

Witness to the signatures of the Bidder: …………………………………………………

📑 Integrity Pact (INP)

Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Published on: Thursday, June 11, 2026 12:00 AM

Ref# : P45965

Integrity Pact

DECLARATION OF FEES, COMMISSION AND BROKERAGE ETC. PAYABLE BYTHE SUPPLIERS OF GOODS, SERVICES & WORKS IN CONTRACTS WORTH RS.10.00 MILLION OR MORE

Contract Number: Contract Value: Contract Title:

Dated:

[Name of Supplier] hereby declares that it has not obtained or induced the procurement of any contract, right, interest, privilege or other obligation or benefit from Government of Pakistan or any administrative subdivision or agency thereof or any other entity owned or controlled by it (GoP) through any corrupt business practice.

Without limiting the generality of the foregoing [Name of Supplier] represents and warrants that it has fully declared the brokerage, commission, fee etc. paid or payable to anyone and not given or agreed to give and shall not give or agree to give to anyone within or outside Pakistan either directly or indirectly through any natural or juridical person, including its affiliate, agent, associate, broker, consultant, director, promoter, shareholder, sponsor or subsidiary, any commission, gratification, bribe, finder's fee or kickback, whether described as consultations fee or otherwise, with the object of obtaining or inducing the procurement of a contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP, except that which has been expressly declared pursuant hereto.

[Name of Supplier] certifies that it has made and will make full disclosure of all agreements and arrangements with all persons in respect of or related to the transaction with GoP and has not taken any action or will not take any action to circumvent the above declaration, representative or warranty.

[Name of Supplier] accepts full responsibility and strict liability for making and false declaration, not making full disclosure, misrepresenting fact or taking any action likely to defeat the purpose of this declaration, representation and warranty. It agrees that any contract, right interest, privilege or other obligation or benefit obtained or procured as aforesaid shall, without prejudice to any other right and remedies available to GoP under any law, contract or other instrument, be voidable at the option of GoP.

Notwithstanding any rights and remedies exercised by GoP in this regard, [Name of Supplier] agrees to indemnify GoP for any loss or damage incurred by it on account of its corrupt business practices and further pay compensation to GoP in an amount equivalent to ten time the sum of any commission, gratification, bribe, finder's fee or kickback given by [Name of Supplier] as aforesaid for the purpose of obtaining or inducing the procurement of any contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP.

📑 Performance Guarantee Form (PGF)

Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Published on: Thursday, June 11, 2026 12:00 AM

Ref# : P45965

Performance Guarantee Form

WHEREAS [name of Bidder] (hereinafter called “the Bidder”) has undertaken, in pursuance of Contract No. [reference number of the contract] dated [insert date] for provision of Goods(hereinafter called “the Contract”).

AND WHEREAS it has been stipulated by you in the said Contract that the Bidder shall furnish you with a Bank Guarantee by a reputable bank for the sum specified therein as security for compliance with the Bidder’s performance obligations in accordance with the Contract.

AND WHEREAS we have agreed to give the Bidders guarantee:

THEREFORE, WE hereby affirm that we are Guarantors and responsible to you, on behalf of the Bidder, up to a total of [amount of the guarantee in words and figures], and we undertake to pay you, upon your first written demand declaring the Bidder to be in default under the Contract and without cavil or argument, any sum or sums within the limits of [amount of guarantee] as aforesaid, without your needing to prove or to show grounds or reasons for your demand or the sum specified therein.

This guarantee is valid until the: [insert date]

Signature and seal of the Guarantors

_____________________________________________________________________

[name of bank or financial institution]

_____________________________________________________________________

[address]

_____________________________________________________________________

[date}

📑 Annexure (ANX)

Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Published on: Thursday, June 11, 2026 12:00 AM

Ref# : P45965

Genrnal Conditions

Technical Submission (Vendor)

Document Required

Special conditions

Technical Submission (Vendor)

Document Required

FORCE MAJEURE and paneities

Technical Submission (Vendor)

Document Required

📑 Procurement Forms (PFD)

Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Published on: Thursday, June 11, 2026 12:00 AM

Ref# : P45965

Past Experience and Completed Contracts

The bidder/vendor should have minimum 03 years experience for supply of electro medical equipment to public sector hospitals/Tertiary care Hospitals independently or through International Agencies and NGO’s (attach documentary proof).

Historical Contract Non-Performance, and Pending Litigation and Litigation History

Affidavit of non-blacklisting.

The bidder must submit an affidavit on stamp paper worth Rs. 100/- declaring that the firm has not been blacklisted by any Federal or Provincial Government department, or any public sector organization within Pakistan.

Ensures / undertakes on legally notarized stamp paper that it has no litigation(s) or arbitrary cases by any department, is not insolvent, in receivership, bankrupt or being penalized and its activities or affairs are not suspended or being administered under any Act, by a court or by a judicial officer.

Current Contracts and Their Progress

The bidder must provide/attach satisfactory performance certificate regarding supplies/ services of electro-medical equipment issued by the public sector hospitals/Tertiary care Hospitals

Financial Capacity and Net Worth Evaluation Form

The bidder will provide bank statement of last 03 (three) financial years (from 1st July to 30th June) i.e 2022-23, 2023-24 & 2024-25

Average Annual Turnover

The bidder must provide proof of annual turnover of the firm minimum 20 million for the Financial year 2024-25.

Standard Bidding Document

📑 Procurement Notice (NIT)

Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Ref# : P45965

PROCUREMENT OF GOODS

📑 Instructions to Bidders (ITB)

Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Ref# : P45965

A. Introduction

1.Scope of Bids

2. Source of Funds

3. Eligible Bidders

4. Eligible Goods and Related Services

5. One Bid per Bidder

6. Cost of Bidding

B. Bidding Documents

7. Contents of Bidding Document

8. Clarification of Bidding documents

9. Amendment of Bidding documents

C. Preparation of Bids

10. Language of Bid

11. Documents and samples Constituting the Bid

12. Documents Establishing Eligibility of the Goods and Conformity to Bidding documents

13. Documents Establishing Eligibility and Qualification of the Bidder

14. Form of Bids

15. Bids Prices

16. Bids Currencies

17. Bids Validity Period

18. Bid Security or Bid Securing Declaration

19. Withdrawal, Substitution, and Modification of Bid

20. Format and Signing of Bid

D. Submission of Bids

21. Submission of Bids through EPADS v2.0

22. Deadline for Submission of Bids

E. Opening and Evaluation of Bids

23. Opening of Bids

24. Clarification of Bids

25. Preliminary Examination of Bids

26. Examination of Terms and Conditions; Technical Evaluation

27. Correction of Errors

28. Conversion to Single Currency

29. Evaluation of Bids

30. Domestic Preference

31. Determination of Successful Bid

32. Abnormally Low Financial Bids

F. Award of Contract

33. Criteria of Award

34. Negotiations

35. Procuring Agency Right to reject all bids

36. Procuring Agency’s Right to Vary Quantities at the Time of Award

37. Notification of Award

38. Signing of Contract

39. Corrupt & Fraudulent Practices

F. Grievance Redressal & Complaint Review Mechanism

40. Constitution of Grievance Redressal

G. Mechanism of Blacklisting

41. Mechanism of Blacklisting

📑 Bid Data Sheet (BDS)

Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Ref# : P45965

Bids Data Sheet (BDS)

BDS Clause Number ITB Number Amendments of, and Supplements to, Clauses in the Instruction to Bidders

A. Introduction

B. Bidding Documents

C. Preparation of Bids

D. Submission of Bids

E. Opening and Evaluation of Bids

F. Review of Procurement Decisions

Eligibility Criteria

Evaluation Criteria

Items/Lots

Related Services of Goods:

Items/Lot Specification

Price Schedule

📑 General Conditions of Contract (GCC)

Re-Tender for Purchase of Electro-Medical Equipment/s of Urology Department, under PSDP project tilled “Strengthening and Up-Gradation of Cardiology and other Departments”, during the financial year 2025-26 & 2026-27.

Ref# : P45965

A. General

1.1 Unless the context otherwise requires, the following terms whenever used in this Contract shall have the same meaning and shall be interpreted as indicated

B. Commencement, Completion, Modification, and Termination of Contract

BDS Clause Number
ITB Number
Amendments of, and Supplements to, Clauses in the Instruction to Bidders