Standard Bidding Document

📑 Procurement Notice (NIT)

Annual Tender 2026-27 for Dental Material and Instruments/OT Medicines/Lab Equipment/Miscellaneous Hospital Items and Queue Management System

Published on: Friday, September 11, 2026 12:27 PM

Ref# : P108739
QR Code

REQUEST FOR BIDS

PROCUREMENT OF GOODS

  1. The SZABMU, School of Dentistry (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad) has reserved Funds for the procurement planned for FY 2026-27. The SZABMU, School of Dentistry (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad) intends to apply part of the proceeds of this Fund to cover eligible payments under the contract for the "Annual Tender 2026-27 for Dental Material and Instruments/OT Medicines/Lab Equipment/Miscellaneous Hospital Items and Queue Management System" with the reference of "P108739"
  2. The SZABMU, School of Dentistry (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad) invites sealed Bids from eligible Bidders for procurement of goods described in the bidding documents on EPADS v2.0.
  3. Single Stage-Two Envelope will be used by adopting Least Cost Based Selection (LCBS) Technique for the subject procurement, in line with the Public Procurement Rules, 2004 and any Regulations, Regulatory Guides, Procurement Guidelines or Instructions issued by the Authority from time to time.
  4. All Bids must be accompanied by a Bid Security amounting described in Bid Security Section in Bidding Document in the form of  Bid Security Not Applicable or all bids must be accompanied by bid securing declaration in the format specified in the Bidding documents
  5. E-Bidding documents, containing detailed terms & conditions, specifications and requirements etc. are available on e-Pak Acquisition and Disposal System (EPADS) at https://epads.gov.pk/opportunities/federal/procurements/108739 for all the interested bidders registered on EPADS v2.0. Bidders are required to get themselves registered on EPADS v2.0 to participate in Bidding process.
  6. The e-bids, prepared in accordance with the instructions in the e-Bidding Documents, must be submitted through EPADS v2.0 on or before Monday, October 5, 2026 11:00 AM. E-bids will be opened using EPADS v2.0 on the same day at Monday, October 5, 2026 11:30 AM. Manual submission of Bids shall not be entertained. Those vendors who have not yet registered on the new version of EPADS v2.0, may register themselves on https://vendors.epads.gov.pk/. A tutorial to explain the registration process is available at https://www.youtube.com/watch?v=MNW6T38v7tc

In terms of Rule 48 of Public Procurement Rules, 2004 Grievance Redressal Committee (GRC) is notified for the subject procurement and notification copy is available on the procuring agency’s website and on Authority’s website at (www.ppra.org.pk).

 

 

SZABMU, School of Dentistry (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad), Purchase Officer
Room # 27, Ground Floor, SOD SZABMU, Ravi Road, Sector G-8/3., Islamabad Capital Territory
+92-334-562-4796
sodpurchaseofficer@szabmu.edu.pk

📑 Instructions to Bidders (ITB)

Annual Tender 2026-27 for Dental Material and Instruments/OT Medicines/Lab Equipment/Miscellaneous Hospital Items and Queue Management System

Published on: Friday, September 11, 2026 12:27 PM

Ref# : P108739
QR Code

A. Introduction

1.Scope of Bids

1.1 The Procuring Agency (PA), as indicated in the Bids Data Sheet (BDS) invites Bids through EPADS v2.0 for the provision of Goods for as specified in the BDS and in Section V – Evaluation Criteria, Specifications & Schedule of Requirements. The name, identification, and number of items/deliverables are provided in the BDS. The successful Bidders will be expected to provide the goods within the specified period and timeline(s) as stated in the BDS.

2. Source of Funds

2.1 Source of funds is referred in Clause-1 of Invitation for Bids.

3. Eligible Bidders

3.1  A Bidder may be natural person, company or firm or public or semi-public agency of Pakistan or any foreign country, or any combination of them with a formal existing agreement (on Judicial Papers) in the form of a joint venture, consortium, or association. In the case of a joint venture, consortium, or association, all members shall be jointly and severally liable for the execution of the Contract in accordance with the terms and conditions of the Contract. The joint venture, consortium, or association shall nominate a Lead Member as nominated in the BDS, who shall have the authority to conduct all business for and on behalf of any and all the members of the joint venture, consortium, or association during the Bidding process, and in case of award of contract, during the execution of the contract.

3.2  Verifiable copy of the agreement that forms a joint venture, consortium or association shall be required to be submitted as part of the Bid.

3.3  The appointment of Lead Member in the joint venture, consortium, or association shall be confirmed by submission of a valid Power of Attorney to the Procuring Agency.

3.4  Any bid submitted by the joint venture, consortium or association shall indicate the part of proposed contract to be performed by each party and each party shall be evaluated (or post qualified if required) with respect to its contribution only, and the responsibilities of each party shall not be substantially altered without prior written approval of the Procuring Agency and in line with any instructions issued by the Authority.

(The limit on the number of members of JV or Consortium or Association may be prescribed in BDS, in accordance with the guidelines issued by the PPRA).

3.5  The invitation for Bids is open to all prospective suppliers, manufacturers, or authorized agents / dealers subject to any provisions of incorporation or licensing by the respective national incorporating agency or statutory body established for that particular trade or business. Procuring agencies shall specify the registration/licensing requirements for the foreign bidders keeping in view the requirement of that business.

3.6  A Bidder shall not have a conflict of interest. All Bidders found to have a conflict of interest shall be disqualified. A Bidder may be considered to have a conflict of interest with one or more parties in this Bidding process, if they:

  1. are associated or have been associated in the past, directly or indirectly with a firm or any of its affiliates which have been engaged by the Procuring Agency to provide consulting services for the preparation of the design, specifications and other documents to be used for the procurement of the Goods to be purchased under this Invitation for Bids.
  2. have controlling shareholders in common; or
  3. receive or have received any direct or indirect subsidy from any of them; or
  4. have the same legal representative for purposes of this Bid; or
  5. have a relationship with each other, directly or through common third parties, that puts them in a position to have access to information about or influence on the Bids of another Bidder, or influence the decisions of the Procuring Agency regarding this Bidding process; or     
  6. Submit more than one Bid in this Bidding process.

3.7  A Bidder may be ineligible if –

  1. he is declared bankrupt or, in the case of company or firm, insolvent;
  2. payments in favor of the Bidder is suspended in accordance with the judgment of a court of law other than a judgment declaring bankruptcy and resulting (in accordance with the national laws) in the total or partial loss of the right to administer and dispose of its property;
  3. the Bidder is convicted, by a final judgment, of any offence involving professional conduct;
  4. the Bidder is blacklisted locally or by international organizations and hence debarred due to involvement in corrupt and fraudulent practices, or performance failure or due to breach of Bid securing declaration.  

3.8  As and when required, bidders shall provide to the Procuring Agency evidence of their eligibility, proof of compliance with the necessary legal requirements to carry out the contract effectively.

3.9  Bidders shall submit Bids relating to the nature, conditions and modalities of sub-contracting wherever the sub-contracting of any elements of the contract amounting to more than ten (10) percent of the Bid price is envisaged.

4. Eligible Goods and Related Services

4.1  All goods and related services to be supplied under the contract shall have their origin in eligible source countries, and all expenditures made under the contract will be limited to such goods and services. For purpose of this Bid, ineligible countries are the countries declared ineligible by the Federal Government. 

5. One Bid per Bidder

5.1  A bidder shall submit only one Bid, in the same bidding process, either individually as a Bidder or as a member in a joint venture or any similar arrangement.

5.2  The Bidder shall not engage a subcontractor for any portion of the contract if the value of such subcontracting exceeds thirty percent (30%) of the total contract amount.

6. Cost of Bidding

6.1   Any cost incurred by the bidder relating to the preparation and submission of its Bid shall be borne by the bidder, and the Procuring Agency shall in no case be responsible or liable for those costs, regardless of the conduct or outcome of the bidding process.

B. Bidding Documents

7. Contents of  Bidding Document

7.1  The Goods required, Bidding procedures, and terms and conditions of the contract are prescribed in the Bidding Documents.  In addition to the Invitation for Bids, the Bidding documents which should be read in conjunction with any addenda issued in accordance with ITB 9.1 include:

Section I -Invitation to Bids

Section II Instructions to Bidders (ITB)

Section III Bid Data Sheet (BDS)

Section IV Evaluation Criteria, Specifications, Schedule of Requirements

Section V Bid Forms

Section VI General Conditions of Contract (GCC)

Section VII Special Conditions of Contract (SCC)

Section VIII Contract Forms

7.2  The Bidder is expected to examine all instructions, forms, terms and specifications in the Bidding documents. Failure to furnish all the information required in the Bidding documents through EPADS v2.0 will be at the Bidder’s risk and may result in the rejection of his Bids.

8. Clarification of Bidding documents

8.1  A prospective Bidder requiring any clarification of the Bidding documents may notify the Procuring Agency through EPADS v2.0.

8.2  The Procuring Agency will within three (3) working days after receiving the request for clarification, respond to any request for clarification through EPADS v2.0 provided that such request is received not later than three (03) days prior to the deadline for the submission of Bids as prescribed in ITB 22

8.3  Copies of the Procuring Agency's response will be forwarded to all identified Prospective Bidders through EPADS v2.0, including a description of the inquiry, but without identifying its source.

8.4  Should the Procuring Agency deem it necessary to amend the Bidding document as a result of a clarification, it shall do so following the procedure under ITB 9.

8.5  If indicated in the BDS, the Bidder’s designated representative is invited at the Bidder’s cost to attend a pre-Bid meeting at the place, date and time mentioned in the BDS. During this pre-Bid meeting, prospective Bidders may request clarification of the schedule of requirement, the Evaluation Criteria or any other aspects of the Bidding document.

8.6  Minutes of the pre-Bid meeting, if applicable, including the text of the questions asked by Bidders, including those during the meeting (without identifying the source) and the responses given, together with any responses prepared after the meeting will be uploaded on EPADS v2.0. Any modification to the Bidding documents that may become necessary as a result of the pre-Bid meeting shall be made by the Procuring Agency exclusively through the use of an Addendum pursuant to ITB 9. Non-attendance at the pre-Bid meeting will not be a cause for disqualification of a Bidder.

9. Amendment of Bidding documents

9.1  Before the deadline for submission of Bids, the Procuring Agency for any reason, whether at its own initiative or in response to a clarification requested by a prospective Bidder or Pre-Bid meeting may modify the Bidding documents by issuing addenda through EPADS v2.0.

9.2  The Procuring Agency shall promptly publish the addendum through EPADS v2.0.

9.3  Any addendum issued including the notice of any extension of the deadline shall also be communicated through EPADS v2.0 to all the bidders who have already submitted their bids. Such bidders shall have the right to withdraw their already submitted bid and re-submit the revised bid prior to the original or extended bid submission deadline.

9.4  To give prospective Bidders reasonable time in which to take an addendum/corrigendum into account in preparing their Bids, the Procuring Agency may, at its discretion, extend the deadline for the submission of Bids through EPADS v2.0:

Provided that the Procuring Agency shall extend the deadline for submission of Bids, if such an addendum is issued within last three (03) days of the Bids submission deadline.

C. Preparation of Bids

10. Language of Bid

10.1  The Bid prepared by the bidder, as well as all correspondence and documents relating to the Bids exchanged by the Bidder and the Procuring Agency shall be written in the English language unless otherwise specified in the BDS.  Supporting documents and printed literature furnished by the Bidder may be in another language provided they are accompanied by an accurate translation of the relevant pages in the English language unless otherwise specified in the BDS, in which case, for purposes of interpretation of the Bidder, the translation shall govern.

11. Documents and samples Constituting the Bid

11.1  The Bid prepared by the Bidder shall constitute thedocuments required in the BDS.

Details of sample(s) where applicable and requested in the BDS.

1.  Documentary evidence established in accordance with ITB that the Bidder is eligible and/or qualified for the subject bidding process;

2.  Documentary evidence establish that the Bidder has been authorized by the manufacturer to deliver the goods into Pakistan, where required and where the supplier is not the manufacturer of those goods;

3.  Documentary evidence establish that the goods and related services to be supplied by the Bidder are eligible goods and services, and conform to the Bidding Documents;

4.  Bid security or Bid Securing Declaration furnished in accordance with ITB 18.

12. Documents Establishing Eligibility of the Goods and Conformity to Bidding documents

12.1  To establish the conformity of the bidder to the Bidding document, the Bidder shall furnish as part of its Bids the documentary evidence that Goods provided conform to the technical specifications and standards.

13. Documents Establishing Eligibility and Qualification of the Bidder

13.1  The Bidder shall furnish, as part of itsBid, all those documents establishing the Bidder’s eligibility to participate in the Bidding process and/or its qualification to perform the contract if its Bid is accepted.

14. Form of Bids

14.1  The Bidder shall fill the Form of Bid furnished in the Bidding documents.The Bids Form must be completed without any alterations to its format and no substitute shall be accepted.

15. Bids Prices

15.1  The Bids Prices quoted by the Bidder in the Form of Bid and in the Price Schedules shall conform to the requirements specified below or exclusively mentioned hereafter in the Bidding documents.

15.2  All items in the Schedule of Requirement must be listed and priced separately in the Price Schedule(s). If a Price Schedule shows items listed but not priced and neither explicitly denied, their prices shall be construed to be included in the prices of other items.

15.3  Items not listed in the Price Schedule shall be assumed not to be included in the Bid, and provided that the Bid is still substantially responsive in their absence or due to their nominal nature, the corresponding average price of the respective item(s) of the remaining substantially responsive Bidder(s) shall be construed to be the price of those missing item(s)

15.4  The Bid price to be quoted in the Form of Bid in accordance with ITB 14.1 shall be the total price of the Bid.

15.5  The Bidder shall indicate on the appropriate Price Schedule, the unit prices (where applicable) and total Bid price of the Goods it proposes to provide under the contract.

15.6  Prices quoted by the Bidder shall be fixed during the Bidder’s performance of the contract and not subject to variation on any account. A Bid submitted with an adjustable price will be treated as non-responsive and shall be rejected.

16. Bids Currencies

16.1 Prices shall be quoted in Pakistani Rupees unless otherwise specified in the BDS in accordance with Rule 30 (2) of the Public Procurement Rules, 2004.

17. Bids Validity Period

17.1  Bids shall remain valid for the period specified in the BDS after the Bid submission deadline prescribed by the Procuring Agency. A Bid valid for a shorter period shall be rejected by the Procuring Agency as non-responsive. The period of Bid validity will be determined from the complementary Bid securing instrument, i.e. the expiry period of Bid Security or Bids Securing Declaration as the case may be.

17.2  The procuring agency shall ordinarily be under an obligation to process and evaluate the bid and to issue letter of award within the stipulated bid validity period.

17.3  Under exceptional circumstances, prior to the expiration of the initial Bid validity period, the Procuring Agency may request the Bidders’ consent to an extension of the period of validity of their Bids only once through EPADS v2.0, for the period not more than the period of initial bid validity. The Bid Security provided under ITB 18 shall also be suitably extended. A Bidder may refuse the request without forfeiting its Bid security or causing to be executed its Bid Securing Declaration.  A Bidder agreeing to the request will not be required nor permitted to modify its Bid, but will be required to extend the validity of its Bid Security or Bid Securing Declaration for the period of the extension.

18. Bid Security or Bid Securing Declaration

18.1  The Bidder shall furnish as part of its Bid, a Bid Security in accordance with Rule 25 of the Public Procurement Rules, 2004.

18.2  The original Bid Security shall be enclosed within the sealed envelope and to be submitted physically before closing time for submission of bids. Whereas, scanned copy of bid security shall be uploaded electronically through EPADS v2.0 before closing hours for submission of bids.

18.3  The Bidder who failed to submit the original Bids security before the submission deadline shall be disqualified straightaway. 

18.4  The Bid Security or Bid Securing Declaration is required to protect the Procuring Agency against the risk of Bidder’s conduct which would warrant the security’s forfeiture, pursuant to ITB 18.7.

18.5  The Bid Security shall be denominated in the local currency, and it shall be a Bank Draft in the name of the Procuring Agency and valid for twenty-eight (28) days beyond the end of the validity of the Bid. This shall also apply if the period for Bids/Bid Validity is extended. In either case, the form must include the complete name of the Bidder.

18.6  The Bid Security shall be payable promptly upon written demand by the Procuring Agency in case any of the conditions listed in ITB 18 are invoked.

18.7  Unsuccessful Bidders’ Bid Security will be discharged or returned as promptly as possible, however in no case later than thirty (30) days after the expiration of the period of Bids Validity prescribed by the Procuring Agency pursuant to ITB 17. The Procuring Agency shall make no claim to the amount of the Bid Security, and shall promptly return the Bid Security document, after whichever of the following that occurs earliest:

  1. the expiry of the Bid Security;
  2. the entry into force of a procurement contract and the provision of a Performance Guarantee, for the performance of the contract if such a guarantee, is required by the Bid documents;
  3. the rejection by the Procuring Agency of all Bids;
  4. the withdrawal of the Bids prior to the deadline for the submission of Bids, unless the Bids documents stipulate that no such withdrawal is permitted.

18.8  The successful Bidder’s Bids Security will be discharged upon the Bidder signing the contract, or furnishing the Performance Guarantee.

18.9  The Bid Security may be forfeited or the Bid Securing Declaration executed:

  1.  if a Bidder:
  2. withdraws its Bid during the period of Bid Validity as specified by the Procuring Agency, and referred by the Bidder on the Form of Bids except as provided for in ITB 17.2; or
  3. does not accept the correction of errors; or
  4. in the case of a successful Bidder, if the Bidder fails:
  5. to sign the contract; or
  6. to furnish Performance Guarantee.

19. Withdrawal, Substitution, and Modification of Bid

19.1  Before Bid submission deadline, any Bidder may withdraw, substitute, or modify its Bid after it has been submitted through EPADS v2.0. Bids requested to be withdrawn, shall be returned unopened to the Bidders through EPADS v2.0.

20. Format and Signing of Bid

20.1  The Bidder shall prepare and submit Bids with due diligence after carefully reading all the terms and condition before bid submission deadline through EPADS v2.0.

D. Submission of Bids

21.  Submission of Bids through EPADS v2.0

21.1  The Technical and Financial Bids if required to submitted, shall be submitted on EPADS v2.0.  

22. Deadline for Submission of Bids

22.1  Bids shall be received by the Procuring Agency through EPADS v2.0 before bid submission deadline.

22.2  The Procuring Agency may, under exceptional circumstances, extend the deadline for the submission of Bids, after recording reasons in writing and in an equal opportunity manner.   

In such case, all rights and obligations of the Procuring Agency and the Bidders that were previously governed by the original deadline shall thereafter be subject to the revised deadline.

E. Opening and Evaluation of Bids

23. Opening of Bids

23.1  The Bid Evaluation Committee of the Procuring Agency shall open all Bids through the EPADS v2.0, on the date and time specified in the Bid Data Sheet (BDS).

23.2  The Bid Evaluation Committee shall generate minutes through EPADS v2.0 containing brief details of bid opening process. The record of the Bid opening shall include, as a minimum: the name of the Bidder, the Bid price if applicable, and the presence or absence of a Bid Security or Bid Securing Declaration.

23.3  The procuring agency shall live broadcast the opening of bids on national media or on their website or digital channels, if the volume of procurement exceeds five hundred million rupees in case of goods and services and one thousand million rupees in case of works.

23.4  In case the date of opening of bid has been declared as public holiday or the procuring agency fail to open bid due to any EPADS v2.0 related issues, the submission and opening of bids shall be shifted to the next working day on the same time.

23.5  In case of Single Stage One Envelope Procedure, the Bidders names, the Bid prices, the total amount of each Bid and, the presence or absence of Bid Security, Bid Securing Declaration and such other details as the Procuring Agency may consider appropriate, will be announced by the Bid Evaluation Committee.

24. Clarification of Bids

24.1  To assist in the examination, evaluation and comparison of Bids of the Bidders, the Procuring Agency may, ask any Bidder for a clarification of its Bid including breakdown of prices.   

24.2  The request for clarification and the response shall be sought through EPADS v2.0 before three days prior to the deadline for submission of bids. No change in the prices or substance of the Bids shall be sought, offered, or permitted.

24.3  The alteration or modification in the BIDS which in any way affect the following parameters will be considered as a change in the substance of a Bids:

  1. evaluation & qualification criteria;
  2. required scope of work or specifications;
  3. all securities requirements;
  4. tax requirements;
  5. terms and conditions of Bidding documents.
  6. change in the ranking of the Bidder

24.4  From the time of Bids opening to the time of Contract award if any Bidder wishes to contact the Procuring Agency on any matter related to the Bids it should do so through EPADS v2.0.

25. Preliminary Examination of Bids

25.1  Prior to the detailed evaluation of Bids, the Procuring Agency will determine whether each Bid:

  1. meets the eligibility criteria defined in ITB 3;
  2. has been prepared as per the format and contents defined by the Procuring Agency in the Bidding documents;
  3. is accompanied by the required securities; and
  4. is substantially responsive to the requirements of the Bidding documents.

25.2  The Procuring Agency's determination of a Bid's responsiveness will be based on the contents of the Bid itself.

25.3  A substantially responsive Bid is one which conforms to all the terms, conditions, and specifications of the Bidding documents, without material deviation or reservation. A material deviation or reservation is one that: -

  1. affects in any substantial way the scope, quality, or performance of the Goods;
  2. limits in any substantial way, inconsistent with the Bidding documents, the Procuring Agency's rights or the Bidders obligations under the Contract; or
  3. if rectified, would affect unfairly the competitive position of other Bidders presenting substantially responsive Bids.

25.3  If a Bids is not substantially responsive, it will be rejected by the Procuring Agency and may not subsequently be evaluated for complete technical responsiveness.

26. Examination of Terms and Conditions; Technical Evaluation

26.1  The Procuring Agency shall examine the Bids to confirm that all terms and conditions specified in the GCC and the SCC have been accepted by the Bidder without any material deviation or reservation.

26.2  The Procuring Agency shall evaluate the technical aspects of the Bids submitted, to confirm that all requirements specified in Schedule of Requirements and Technical Specifications of the Bidding documents have been met without material deviation or reservation.

26.3  If after the examination of the terms and conditions and the technical evaluation, the Procuring Agency determines that the Bid is not substantially responsive in accordance with ITB 25.2, it shall reject the Bid.

27. Correction of Errors

27.1  Bids determined to be substantially responsive will be checked for any arithmetic errors.  Errors will be corrected as follows: -

  1. if there is a discrepancy between unit prices and the total price that is obtained by multiplying the unit price and quantity, the unit price shall prevail, and the total price shall be corrected, unless in the opinion of the Procuring Agency there is an obvious misplacement of the decimal point in the unit price, in which the total price as quoted shall govern and the unit price shall be corrected;
  2. if there is an error in a total corresponding to the addition or subtraction of sub-totals, the sub-totals shall prevail and the total shall be corrected; and
  3. where there is a discrepancy between the amounts in figures and in words, the amount in words will govern.
  4. Where there is discrepancy between grand total of price schedule and amount mentioned on the Form of Bids, the amount referred in Price Schedule shall be treated as correct subject to elimination of other errors.

27.2  The amount stated in the Bid will, be adjusted by the Procuring Agency in accordance with the above procedure for the correction of errors and, with the concurrence of the Bidder, shall be considered as binding upon the Bidder. If the Bidder does not accept the corrected amount, its Bid will then be rejected, and the Bid Security may be forfeited or the Bids Securing Declaration may be executed.

28. Conversion to Single Currency

28.1  To facilitate evaluation and comparison, the Procuring Agency will convert all Bids prices expressed in the amounts in various currencies in which the Bids prices are payable. For the purposes of comparison of bids quoted in different currencies, the price shall be converted into a single currency specified in the bidding documents. The rate of exchange shall be the selling rate prevailing on the date of opening of financial bids specified in the bidding documents, in accordance with weighted average customer exchange rates list issued by the State Bank of Pakistan on that day.

29. Evaluation of Bids

29.1  The Bids, quotations, or proposals shall be evaluated by the respective evaluation committees as per evaluation criteria described in the Bidding Documents in accordance with Rule 29 and 30 of the Public Procurement Rules, 2004.

1. Least Cost Based Selection (LCBS)
After meeting the requirements of eligibility, qualification and substantial responsiveness, the bid in compliance with all the mandatory (technical) specifications/requirements and/or requisite quality threshold (if any), and having lowest evaluated cost (or financial proposal) shall be considered Successful Bid.

2. Quality and Cost Based Selection (QCBS)
In such combination, there shall be some specific weightage of both the technical features and financial aspects of the proposal. The financial marks shall be awarded on the basis of inverse proportion calculations. The successful bid shall be declared, on the basis of combined evaluation.

3. Quality Based Selection (QBS)
Atter meeting the requirements of eligibility, qualification and substantial responsiveness the bid in compliance with all the mandatory (technical) specifications/requirements and attaining highest marks in the Technical Evaluation considering all other qualitative and/or quantitative parameters (or point rated criteria) for technical proposal(s) such as working methodology, implementation plan, resource allocation, additional functionalities, risk management approach, knowledge transfer techniques, post implementation methodology etc. shall be treated as highest ranked bid. Later on, the financial proposal of highest ranked bidder shall be opened, however, in case of failure to proceed further with such a bidder, the procuring agency may resort to second highest bidder and so on.

29.2  In case of tie of bids, the bidders shall be provided an opportunity to offer their best and final monetary offer through EPADS v2.0. However, in no case the rates shall be higher than the original financial bids.

30. Domestic Preference

30.1  The procuring agency shall evaluate and compare bids, allow for preference to domestic bidders, while competing with the international bidders in accordance with the policies of Federal Government.

The percentage of preference, to be accorded shall be clearly mentioned in the bidding documents under the bid evaluation criteria.

31. Determination of Successful Bid

31.1  Selection technique will be adopted for determining the Successful Bid in accordance with the criteria referred in the BDS or prescribed in the separate section titled as Evaluation Criteria.

31.2  In case where the Procuring Agency adopts the Cost Based Evaluation Technique and, the Bid with the lowest evaluated price from amongst those which are eligible, compliant and substantially responsive shall be the Successful Bid.

31.3  The Procuring Agency may adopt the Quality & Cost Based Selection Technique due to the following two reasons:

1. Where the Procuring Agency knows about the main features, usage and output of the products; however not clear about the complete features, technical specifications and functionalities of the goods to be procured and requires the bidders to submit their proposals defining those features, specifications and functionalities; or

2. Where the Procuring Agency, in addition to the mandatory requirements and mandatory technical specifications, requires parameters specified in Evaluation Criteria to be evaluated while determining the quality of the goods.

31.4  In such cases, the Procuring Agency may allocate certain weightage to these factors as a part of Evaluation Criteria, and may determine the ranking of the bidders on the basis of combined evaluation in accordance with provisions of Rule 2(1)(h) of the Public Procurement Rules, 2004.

32. Abnormally Low Financial Bids

32.1Where the Bid price is considered to be abnormally low, the Procuring Agency shall perform price analysis either during determination of Successful Bids or as a part of the post-qualification process.

32.2  The Procuring Agency may reject an Abnormally low financial bids.

32.3  In order to identify the Abnormally Low Bids (ALB) following approaches can be considered to minimize the scope of subjectivity:

  1. Comparing the Bids price with the cost estimate;
  2. Comparing the Bids price with the Bids offered by other Bidders submitting substantially responsive Bids; and
  3. Comparing the Bids price with prices paid in similar contracts in the recent past either government- or development partner-funded.

32.4  The Procuring Agency will determine to its satisfaction whether the Bidder that is selected as having submitted the successful bid is qualified to perform the contract satisfactorily.

32.5  The determination will take into account the Bidder’s financial, technical, and production capabilities.  It will be based upon an examination of the documentary evidence of the Bidder’s qualifications submitted by the Bidder, as well as such other information as the Procuring Agency deems necessary and appropriate. Factors not included in these Bidding documents shall not be used in the evaluation of the Bidders’ qualifications.

32.6  Procuring Agency may seek “Certificate for Independent Price Determination” from the Bidder and the results of reference checks may be used in determining an award of contract.

Explanation: The Certificate shall be furnished by the Bidder. The Bidder shall certify that the price is determined keeping in view of all the essential aspects such as raw material, its processing, value addition, optimization of resources due to economy of scale, transportation, insurance and margin of profit etc.

32.7  An affirmative determination will be a prerequisite for award of the contract to the Bidder. A negative determination will result in rejection of the Bidder’s Bids, in which event the Procuring Agency will proceed to the next ranked Bidder to make a similar determination of that Bidder’s capabilities to perform satisfactorily.

F. Award of Contract

33. Criteria of Award

33.1 The Procuring Agency will award the Contract to the Bidder whose Bids has been determined to be substantially responsive to the Bidding documents and who has been declared as Most Advantageous Bidder.

34. Negotiations

34.1  The procuring agency shall not engage in negotiations with respect to scope and price with the bidder except when the procuring agency conducts a procurement using direct or negotiated contracting or a request for proposals with evaluation based on quality alone.

34.2  The procuring agency may negotiate with the most advantageous bid with a view to streamline the work or task execution, at the time of contract finalization on methodology, work plan, staffing, finalizing payment arrangements, delivery arrangements, minor amendments to the special conditions of the contract.

35. Procuring Agency Right to reject all bids

35.1  The Procuring Agency reserves the right to reject all bids or proposals at any time prior to the issuance of the Letter of Award, without incurring any liability, in accordance with Rule 33 of the Public Procurement Rules, 2004.

36. Procuring Agency’s Right to Vary Quantities at the Time of Award

36.1  The Procuring Agency reserves the right at the time of contract award to increase or decrease the quantity of Goods originally specified in these Bidding documents provided this does not exceed by 15%, without any change in unit price or other terms and conditions of the Bids and Bidding documents.

37. Notification of Award

37.1  Prior to the award of contract, the procuring agency shall announce and publish the result of bid evaluation on EPADS v2.0 in accordance with Rule 35 of the Public Procurement Rules, 2004.

37.2  The Bidder whose Bids has been accepted will be notified of the award by the Procuring Agency prior to expiration of the Bids/Bid Validity period. The Letter of Award will state the sum that the Procuring Agency will pay the successful Bidder in consideration for the delivery of Goods as prescribed by the Contract (hereinafter and in the Contract called the "Contract Price).

37.3  The Letter of award will constitute the formation of the Contract, subject to the Bidder furnishing the Performance Guarantee and signing of the contract.

38. Signing of Contract

38.1  Promptly after issuance of Letter of award, Procuring Agency shall send the successful Bidder the draft Contract, incorporating all terms and conditions as agreed by the parties to the contract.

38.2  Immediately after the Redressal of grievance by the GRC (if any), mandatory standstill period in accordance with Rule 35 of the Public Procurement Rules, 2004 and after fulfillment of all condition’s precedent of the Contract Form, the successful Bidder and the Procuring Agency shall sign the Contract. 

39. Corrupt & Fraudulent Practices

39.1  Procuring Agencies (including beneficiaries of Government funded projects and procurement) as well as Bidders/Contractors under Government financed contracts, observe the highest standard of ethics during the procurement and execution of such contracts, and will avoid to engage in any corrupt and fraudulent practices. 

F. Grievance Redressal & Complaint Review Mechanism

40. Constitution of Grievance Redressal

40.1  The Grievance Redressal Committee shall address the grievance, if any submitted by any party, including the bidder, in accordance with Rule 48 of the Public Procurement Rules, 2004 to be read with Redressal of Grievances Regulations, 2021.

40.2  In case if any party or the bidder is not satisfied with the decision of the GRC or if it fails to decide within ten days, the bidder or the party may file an appeal before the Appellate Committee of the Authority in accordance with Rule 48 of the Public Procurement Rules, 2004 to be read with Redressal of Grievances Regulations, 2021.

G. Mechanism of Blacklisting

41. Mechanism of Blacklisting

41.1  The Procuring Agency shall initiate blacklisting proceedings against any bidder, supplier, or contractor in accordance with the Mechanism for Blacklisting Regulations, 2024, read with Rule 19 of the Public Procurement Rules, 2004.

41.2  The blacklisted/debarred bidder may file the review petition before the Authority in accordance with Rule 19 of the Public Procurement Rules, 2004 to be read with Procedure of filing and disposal of Review Petitions Regulations, 2021.

📑 Bid Data Sheet (BDS)

Annual Tender 2026-27 for Dental Material and Instruments/OT Medicines/Lab Equipment/Miscellaneous Hospital Items and Queue Management System

Published on: Friday, September 11, 2026 12:27 PM

Ref# : P108739
QR Code

Bids Data Sheet (BDS)

The following specific data for the procurement of Goods to be procured shall complement, supplement, or amend the provisions in the Instructions to Bidders (ITB).  Whenever there is a conflict, the provisions herein shall prevail over those in ITB.

BDS Clause Number
ITB Number
Amendments of, and Supplements to, Clauses in the Instruction to Bidders

A. Introduction

BDS Clause Number 1
ITB Number 1.1

Name of Procuring Agency: SZABMU, School of Dentistry (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad)

The subject of procurement is: Annual Tender 2026-27 for Dental Material and Instruments/OT Medicines/Lab Equipment/Miscellaneous Hospital Items and Queue Management System

Expected commencement date: Tuesday, December 15, 2026

BDS Clause Number 2
ITB Number 2.1

Financial year for the operations of the Procuring Agency: 2026-27

Name and identification number of the Contract: P108739 

BDS Clause Number 3
ITB Clause Number 3.1

JV/Consortium or Association Allowed: No
Number of JV/Consortium Members: Nil
see section of eligibility criteria.

B. Bidding Documents

BDS Clause Number 4
ITB Number 8.1

The Bidders may seek clarifications through EPADS v2.0 : Clarification Date: Friday, October 2, 2026

C. Preparation of Bids

BDS Clause Number 5
ITB Number 10.1

The Language of all correspondences and documents related to the Bids shall be in: English 

List of documents required along with the bid: No

BDS Clause Number 6
ITB Number 11.1
Items/Lots and their related documents:
See section items and Lots

BDS Clause Number 7
ITB Number 12.1

Items / Lots Specifications:

see section of items specifications.

BDS Clause Number 8
ITB Number 15.6

The price shall be Fixed.

BDS Clause Number 9
ITB Number 16.1

Currency of the Bids shall be : PKR

BDS Clause Number 10
ITB Number 17.1

The Bids/Bid Validity period shall be: 180 Days

BDS Clause Number 11
ITB Number 18.1

The amount of Bid Security shall be as defined in Bid Security Section for items and lots given in BDS 6
The Bid Security shall be in the form of:   

D. Submission of Bids

BDS Clause Number 12
ITB Number 20.1

Bid shall be submitted online on EPADS v2.0 whereas hard copy of the bid security should be submitted to the following;

Room # 27, Ground Floor, SOD SZABMU, Ravi Road, Sector G-8/3., Islamabad Capital Territory before bid submission deadline.

Bids that are not submitted on EPADS v2.0 shall be disqualified.

The deadline for Bids submission is: Monday, October 5, 2026 11:00 AM

E. Opening and Evaluation of Bids

BDS Clause Number 13
ITB Number 23.1

The Bids opening shall take place on EPADS v2.0.

Day : Monday

Date: Monday, October 5, 2026

Time : 11:30 AM

BDS Clause Number 14
ITB Number 31.1

Selection technique adopted will be: Least Cost Based Selection (LCBS)
see Evaluation Criteria

F. Review of Procurement Decisions

BDS Clause Number 15
ITB Number 41.1

Grievence against this procurement shall be submitted online on EPADS v2.0.

Arbitrator shall be appointed by mutual consent of the both parties.

Eligibility Criteria

Eligible Bidders: Individual / Individual Consultant, Sole Proprietorship, Company (Private Limited)

Required Registration

NADRA CITIZENSHIP (CNIC/NICOP)

FBR (NTN)

FBR (GSTN)

DRAP

Eligibility Criteria Document
DRAP is only necessary where applicable. Yes
Manufacturer/Distributor/supplier must be have Valid NTN and GST. Manufacturer/Distributor/supplier must be ATL at FBR. Quoted price should be inclusive of All taxes and Delivery charges. Quotation must be valid for 1 week. Procurement agency has the right to accept or reject any quotation at anytime. Final decision should be taken by the Procurement department. Yes

Evaluation Criteria

Eligibile bidder(s) with substantially responsive bid(s) offering Least Cost Based Selection (LCBS) shall be consider for the award of contract(s).

Least Cost Based Selection (LCBS)

Weightage

Technical Evaluation %
100
Technical Marks100
Passing Marks70
Technical Evaluation Criteria
01 Original receipt for purchase of tender. 02 Attested copy of CNIC. 03 Acceptance of terms and conditions, tender documents duly signed and stamped. 04 An affidavit on stamp paper of Rs. 100/- submitting following clauses: (i) Replacement of unconsumed / expired stocks free of cost. (ii) That the firm is never blacklisted on any grounds whatsoever. (iii) Price Reasonable Certificate. (iv) Certificate that prices are not more than trade price. 05 An affidavit on stamp paper submitting that the price quoted to this institute against the quoted items mentioned in the bid are not more than the prices charged from any Purchase Organization in the country and in case of discrepancy, the bidder hereby undertakes to refund the price charged in excess. 06 Affidavit on Original Letter Head (as per specimen Proforma attached). 07 Call Deposit / Banker’s Cheque / Bank Guarantee as Bid Security required (2% of estimated price). 08 National Tax Number (NTN). 09 General Sales Tax Number Certificate (STN). 10 Professional Tax. 11 Bank Statement of last three years. 12 Annual Return & Audit Report of last 3 Financial Years with minimum turnover of Rs. 50 million per year. 13 Details of list of contracts awarded to the firm in last 3 Financial Years / work experience with Government / Semi-Government Organizations. Registration of the firm with Government institutions / departments. (Qualitative)(Doc Required)50
14 Does the Company / Firm have a local office? (Firms having local offices will be preferred). 15 DRAP License is mandatory and DRAP Registered products will be prioritized. 16 Original Distributors & Direct Importers will be encouraged for imported items. 17 Experience Certificate / Past Performance Certificate. 18 Sample provided as per Proforma attached. 19 The Original Price List of the firm indicating the inclusion of the item / product of quoted item (Latest) (if applicable). 20 The bidder is required to provide Financial Proposal with the name of items, tender number and serial number in the exact manner as quoted in the Technical Proposal. 21 Price should not be mentioned on Technical Bid. Note: - Attested copies of all the documents mentioned above must be attached with this list. (Qualitative)(Doc Required)50

Items/Lots

Items Without Lots :

Item UNSPSC Delivery Schedule Quantity Bid SecuritySample QuantityManufacturer / Dealer AuthorizationWarranty
DENTAL INSTRUMENTS & MATERIALS Dental instrument sets
Address: Room # 27, Ground Floor, SOD SZABMU, Ravi Road, Sector G-8/3., Islamabad Capital Territory Schedule: 365 Days Quantity: 1/Qty
1/Qty 4500000 PKR1 -- 365 Days
OPERATION THEATER MEDICINE AND EQUIPMENT Drugs or medicine production services
Address: Room # 27, Ground Floor, SOD SZABMU, Ravi Road, Sector G-8/3., Islamabad Capital Territory Schedule: 365 Days Quantity: 1/Qty
1/Qty 600000 PKR1 -- 365 Days
MEDICAL EQUIPMENT Medical equipment and instrument disinfectant washing equipment
Address: Room # 27, Ground Floor, SOD SZABMU, Ravi Road, Sector G-8/3., Islamabad Capital Territory Schedule: 365 Days Quantity: 1/Qty
1/Qty 400000 PKR1 -- 365 Days
QUEUE MANAGEMENT SYSTEM Queue numbering system
Address: Room # 27, Ground Floor, SOD SZABMU, Ravi Road, Sector G-8/3., Islamabad Capital Territory Schedule: 365 Days Quantity: 1/Qty
1/Qty 600000 PKR-- -- 365 Days

Related Services of Goods:

No

Items/Lot Specification

Items Without Lots :

Item: DENTAL INSTRUMENTS & MATERIALS

UNSPSC: Dental instrument sets

Specifications / Requirementsss:

School of Dentistry, Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad
General Items
Sr. NoItem NameBrand NameRegistration NoManufactureRate per unitRate per UnitPack SizeRate Per PackSuppliers
1Alcohol swab 200 each box of 100  ImportedPer unit price    
2steel box with lock (medium)perforated for autoclave instruments  LocalPer unit price    
3steel box with lock (large)perforated for autoclave instruments  LocalPer unit price    
4Aluminium Foils roll large  LocalPer unit price    
5Ammonia spirit  LocalPer unit price    
6Alveogel  ImportedPer unit price    
7Alginate CA 37  Europe/netherlandPer unit price    
8Alginate cavex cream  Europe/netherlandPer unit price    
9Alginate  ChinaPer unit price    
10Anaesthetic Gel Xylitol  ImportedPer unit price    
11Articulating paper ,12 BOOK/12 SHEETS in a box  ImportedPer unit price    
12B.P Apparatus complete kit Mercury  ImportedPer unit price    
13B.P Apparatus complete kit Digital  ImportedPer unit price    
14Barrier films (4x6 ,1200 sheets)  ImportedPer unit price    
15Biopsy bottle 100ML  LocalPer unit price    
16Bite blocks peads/ small  ImportedPer unit price    
17Bite block large/ adult  ImportedPer unit price    
18Butane gas for torch refill  ImportedPer unit price    
19Bur holder plastic  ImportedPer unit price    
20Bleach (Concentrated) or ChloroCide( Prediluted)  LocalPer unit price    
21Bur Carbide high speed burs different shapes for high speed  ImportedPer unit price    
22Blue Diamond burs (TR series, TF series, BR series , SF series , Inverted series, Oval shape series, FO series., Dumbel shaped, Pear shaped) )  ImportedPer unit price    
23Cheek Retractor plastic (Packet of all 3/5 sizes)  ImportedPer unit price    
24Chlorhexidine gluconate mouthwash, bottle  LocalPer unit price    
25Cling Film,  LocalPer unit price    
26Composite Curing light  Europe/USPer unit price    
27Cotton Roll 40 wraps per box, 2000 pieces  LocalPer unit price    
28Cotton Rolls Dispenser  ImportedPer unit price    
29Disinfectant spray bottle for surfaces disinfection  ImportedPer unit price    
30Disinfectant solution for instruments Aldehyde free (Microtent)  ImportedPer unit price    
31Dipen Dishes glass  ImportedPer unit price    
32Dipen dish plastic for polishing paste   Per unit price    
33Disposable dental examination sets complete (mirror ,probe, twizer)  LocalPer unit price    
34Dental Loupes 3.5 magnification with all accessories, light, battery  ImportedPer unit price    
35Disinfectent tray for instruments with cover stainless steel Large size, Rust free  LocalPer unit price    
36Dental Needles for local anesthesia short , 27G 0.3X21Mm  Imported/localPer unit price    
37Dental floss12x50m/M (reel of 55 yard) or equivalent  localPer unit price    
38Dental Needles for anesthesia, Long , 30G 0.4X42Mm  ImportedPer unit price    
39Disposable Glass plastic  LocalPer unit price    
40Disposable Needle 3cc Pkt of 100  ImportedPer unit price    
41Digital sensor for occlusal view  ImportedPer unit price    
42Digital sensor film for adults compatible with Scanograph Italy Imported  ImportedPer unit price    
43Digital x-ray sensor size adult size 2 with all accessories  ImportedPer unit price    
44Distiller Water 5 liter bottle  LocalPer unit price    
45Elfy  LocalPer unit price    
46Examination Gloves BLUE ,Non sterile , latex powered free, 100 gloves in a box, S, M, L  ImportedPer unit price    
47Examination Gloves ,Non sterile , latex powered, 100 gloves in a box, S, M, L  ImportedPer unit price    
48Examination Instruments kit, Mirror, probe tweezer, Complete kit  LocalPer unit price    
49Film holder bitewing kit or stick-on (for bitewing x-rays)  ImportedPer unit price    
50Face Mask, 3 layered, 50 pieces in a box)  ImportedPer unit price    
51Flouride Varnish packing of 200 pieces  ImportedPer unit price    
52Formalin 100 % pure.  LocalPer unit price    
53Glucometer kit  ImportedPer unit price    
54Glucometer Lancets 200 pieces each pack  ImportedPer unit price    
55Glucometer Strips compatible with glucometer  ImportedPer unit price    
56Guaze Pieces 2 x 2 sterile, 4 ply,200 pieces in a packet  LocalPer unit price    
57Hand Piece Oil  ImportedPer unit price    
58Hand Sanitizer 500ml  LocalPer unit price    
59Head Cap for surgery  LocalPer unit price    
60Hard plaster 1 kg pack  LocalPer unit price    
61Soft plaster kg pack  localPer unit price    
62Impression Trays Metal complete pkt ( packet of different sizes S, M, L )  localPer unit price    
63Impression Trays Plastic complete pkt ( packet of different sizes S, M, L )  ImportedPer unit price    
64Indicator strips type 2 for Autoclave  ImportedPer unit price    
65Instrument trolley for autoclave steel good quality  importedPer unit price    
66Instrument washing brushes (all types) with steal bristels  ImportedPer unit price    
67Instruments Trays (Steel Square large for autoclave instruments with cover)  LocalPer unit price    
68Instruments Trays (Steel Square medium for dental chair instruments)  LocalPer unit price    
69Illuminators for chest x-ray or OPG  LocalPer unit price    
70Illuminators for CT or CBCT (large size)  LocalPer unit price    
71Insulin Syringes  LocalPer unit price    
72Kidney trays for instruments metal  LocalPer unit price    
73Lead apron large ISO Certified  ImportedPer unit price    
74Lead apron small  ImportedPer unit price    
75Lidocaine Spray  ImportedPer unit price    
76Local anesthesia 2 % 1.8 ml, 1:100000 epinephrine pkt of 50  LocalPer unit price    
77Local anesthesia 2 % 1.8 ml, 1:100000 epinephrine pkt of 50  ImportedPer unit price    
78Loose cotton roll large size pkt  LocalPer unit price    
79Match Boxes  LocalPer unit price    
80Mirror Tops pkt of 12-15  localPer unit price    
81Mixing Pads  ImportedPer unit price    
82Napkin Holder  ImportedPer unit price    
83Napkins (13x18)33x45cm , 500 piece in a box  ImportedPer unit price    
84Needle cutting boxes(red)  LocalPer unit price    
85Normal Saline 1000 ml  LocalPer unit price    
86Paper mixing pad  ImportedPer unit price    
87Paralleling device for x-ray sensor only complete kit (not for xray film)  ImportedPer unit price    
88Plunngers for loacl anesthesia cartridges stainless steel  localPer unit price    
89Pertolium jelly pack/ Vasline( Large size)  LocalPer unit price    
90Plaque Disclosing Agent  ImportedPer unit price    
91Pulse oxymeter handheld  ImportedPer unit price    
92Portable suction machine, two bottles  ImportedPer unit price    
93Portable X-ray machine with all acessories  ImportedPer unit price    
94Polythene gloves , 100 in a packet  LocalPer unit price    
95Retraction Cord size 0, 00, 000, 1, ( 50 each)  ImportedPer unit price    
96Sani-plast packet of 100  LocalPer unit price    
97High speed handpiece 4 holes  EuropePer unit price    
98High speed handpiece 4 holes with light  EuropePer unit price    
99Slow speed handpieces four holes with attachment contrangle & straight  EuropePer unit price    
100Slow speed handpiece attachment contrangle compatible with W & H  EuropePer unit price    
101Slow speed handpiece attachment straight compatible with W & H  Europe     
102Scalpel for surgical blade  LocalPer unit price    
103Sleeves for Digital x-ray Sensor  ImportedPer unit price    
104Sleeves for handpieces high/slow  importedPer unit price    
105Sleeves for ultrasonic scalers  ImportedPer unit price    
106Shoes Cover for Operation theater/ CSSD  LocalPer unit price    
107Spirit  LocalPer unit price    
108Spirit lamp  localPer unit price    
109Spongo staine  ImportedPer unit price    
110Sterlization pouch sealer with cutter with complete accessories  ImportedPer unit price    
111Suction tips(Latex free ,Non Toxic ,100/Bag)  ImportedPer unit price    
112Surgical Blades 12( box)  LocalPer unit price    
113Surgical Blades 15 (box)  imported/localPer unit price    
114Surgical Scissor Medium size  LocalPer unit price    
115Syringes 10 ml , 100 pieces in a box  Local/ImportedPer unit price    
116Syringes 20 ml , 100 pieces in a box  Local/ImportedPer unit price    
117Syringes 5 ml , 100 pieces in a box  Local/ImportedPer unit price    
118Teflon tape or equivalent  ImportedPer unit price    
119Tongue depressors  localPer unit price    
120Torch flame gun  ImportedPer unit price    
121Thyroid shield ISO Certified  ImportedPer unit price    
122Tourniquet  ImportedPer unit price    
123Triple syringe for dental units (steel)  ImportedPer unit price    
124Triple syringe disposable tips  importedPer unit price    
125Washing Brushes for instruments with steal bristels  Local/ImportedPer unit price    
126Washing Brushes for trays large with plastic bristels  localPer unit price    
127waste bins yellow with wheels and foot padel 360 liter  localPer unit price    
128waste bins yellow with wheels and foot padel 1000 -1200 liter  LocalPer unit price    
129waste bins for sharp instruments large size yellow  ImportedPer unit price    
130Wooden Sticks 400/ pack, for oral examination  LocalPer unit price    
131Weight machine  ImportedPer unit price    
132Vacuum machine for night guard/ retainers  ImportedPer unit price    
Autoclave / Sterilization
Sr. NoItem NameBrand NameRegistration NoManufactureRate per unitRate per UnitPack SizeRate Per PackSuppliers
133Batrik flat cleaning brushes (Green, red, yellow, blue)   Per unit price    
134Black copper Thermal Paper roll (11 cm/4.5 inch)(2.2 inch)(for auto claving record keeping)   Per unit price    
135Bleach   Per unit price    
136Deconex 64 Neutradry ( Neutral rinsing and drying aid/For reprocessing medical instruments)   Per unit price    
137DeconexProzyme Alka (Mild Alkaline /Enzymatic instrument cleaner/Washer disinfector)   Per unit price    
138Distilled Water(FOR AUTO CLAVE) 5 liter bottle   Per unit price    
139Helix Indicator strips type 2(GKE steri -Record Process and Batch Monitoring Product code C-S-PM-SV1: Article Number 211-255) or Biological strips   Per unit price    
140Instruments sterilization Crepe paper 300mm x 300mm(Strelization wrapping paper)   Per unit price    
141Instruments sterilization Crepe paper 600mm x 600mm (Strelization wrapping paper)  LocalPer unit price    
142Instruments sterilization pouches rolls (55 X 200 mm) small  LocalPer unit price    
143Instruments sterlization pouches roll ( Large 100 X 200 )  LocalPer unit price    
144Instruments sterlization pouches roll ( medium 75mm X 200 )  LocalPer unit price    
145Medical Aprons for autoclve Sterlization   Per unit price    
146Medical Safety Long Shoes rubber   Per unit price    
147Self sealing Pouches Large  LocalPer unit price    
148Self sealing pouches small  LocalPer unit price    
149Self sealing Pouches Medium 90X 260mm  LocalPer unit price    
Ceramic Lab
Sr. NoItem NameBrand NameRegistration NoManufactureRate per unitRate per UnitPack SizeRate Per PackSuppliers
150Anatomical wax bar profiles Ref No.40075(BEGO)  ImportedPer unit price    
151Bego Sole Wirovest liquid 51095  ImportedPer unit price    
152Crucible induction casting machine (MESTRA)  ImportedPer unit price    
153Crucible ring for casting  ImportedPer unit price    
154Dental laboratory sucker dust collector ( IMPORTED )  ImportedPer unit price    
155Die cutting unit  ImportedPer unit price    
156Die pin  ImportedPer unit price    
157Die saw  ImportedPer unit price    
158Die spacer  ImportedPer unit price    
159Diamond burs for metal finishing different sizes  ImportedPer unit price    
160Digital Shade guide  ImportedPer unit price    
161Durol die hardener  ImportedPer unit price    
162Enamel Light, Dark, Natural  ImportedPer unit price    
163Glaze liquid  ImportedPer unit price    
164Glaze powder  ImportedPer unit price    
165Gum porcelain (Tissue conditioner) Tissue 6 and 7  ImportedPer unit price    
166Half Round wire  LocalPer unit price    
167Inlay blue  ImportedPer unit price    
168Inlay wax red  ImportedPer unit price    
169Intra oral Gothic arch tracer  ImportedPer unit price    
170Isocera ( BEGO )Ref No . 52705  ImportedPer unit price    
171Lucia Jig Kit  ImportedPer unit price    
172Mandrel  ImportedPer unit price    
173Metal grinding burs  ImportedPer unit price    
174Metal grinding disc  ImportedPer unit price    
175Metal grinding wheel  ImportedPer unit price    
176Mollomet Kit  ImportedPer unit price    
177Packs of Preformed clasps (for all teeth)  ImportedPer unit price    
178Plaster cutter  LocalPer unit price    
179Porcelain A1, A3.5,A4, B1, B2, B3, B4, C1, C2, C3, C4, D1, D2, D3  ImportedPer unit price    
180Porcelain A2,A3  ImportedPer unit price    
181Porcelain liquid  ImportedPer unit price    
182Porcelain mixing jar  LocalPer unit price    
183Porcelain sable brushes  ImportedPer unit price    
184Porcilean Finishing Burs  ImportedPer unit price    
185Powder opaque A2,A3  ImportedPer unit price    
186Powder opaque A1, A3.5,A4, B1, B2, B3, B4, C1, C2, C3, C4, D1, D2, D3  ImportedPer unit price    
187Ring holder  ImportedPer unit price    
188Rubber cone  ImportedPer unit price    
189Rubber wheels  ImportedPer unit price    
190Sand for sand blaster (fine grit)  ImportedPer unit price    
191Servo Motor Stabilizer 3000 W  ImportedPer unit price    
192Smooth casting Wax Ref No.40094(BEGO)  ImportedPer unit price    
193Smooth casting Wax Ref No.40095  ImportedPer unit price    
194Spectophotometer  ImportedPer unit price    
195Speedy disc 0.2mm 54810 (BEGO)  ImportedPer unit price    
196Stain.blue.orange.brown 1 bottle each  ImportedPer unit price    
197Stippled Casting Wax (Ref No. 40180) (BEGO)  ImportedPer unit price    
198Stippled Casting Wax(Ref No. 40194) (BEGO)  ImportedPer unit price    
199Stippled Casting Wax(Ref No. 40230) (BEGO)  ImportedPer unit price    
200Stone cone  ImportedPer unit price    
201Stone wheel  ImportedPer unit price    
202Wax Border Strips Ref No.40025(BEGO)  ImportedPer unit price    
203Wax Clasp Molars Ref No. 40020 (BEGO)  ImportedPer unit price    
204Wax Grid Retentions for Upper-jaw dentures Ref No.40039(BEGO)  ImportedPer unit price    
205Wax Patterns Bony Hard Clasp Ref No.40024(BEGO)  ImportedPer unit price    
206Wax Patterns for Molars Ref No.40022(BEGO)  ImportedPer unit price    
207Wax Patterns for Premolars Ref No.40021 (BEGO)  ImportedPer unit price    
208Wax Patterns Ring Clasp Ref No.40023(BEGO)  ImportedPer unit price    
209Wax profile (0.8mm) beading Wire Ref No.40261(BEGO)  ImportedPer unit price    
210Wax retentions with round holes- for lower-jaw partial denture frame Ref No.40051(BEGO)  ImportedPer unit price    
211Wirodouble Ref No . 52050(BEGO)  ImportedPer unit price    
212Wirolyt 52460  ImportedPer unit price    
213Wironit Ref No. 50030 (BEGO)  ImportedPer unit price    
214Wirovest Investment Material Ref No. 51046/51057(BEGO)  ImportedPer unit price    
215Wirovest Investment Material Ref No. 51057(BEGO)  ImportedPer unit price    
216Ziplock bags  ImportedPer unit price    
217LPG Cylinder fiber large 40 liter size with Accessories  ImportedPer unit price    
218Manual casting machine with Oxyacetylene torch  ImportedPer unit price    
219Oxygen Cylinder with Accessories  LocalPer unit price    
220Servo motor stabilizer 3000 watt  ImportedPer unit price    
Acrylic Lab
Sr. NoItem NameBrand NameRegistration NoManufactureRate per unitRate per UnitPack SizeRate Per PackSuppliers
221AcrB4:B34rs  ImportedPer unit price    
222Acrylic Storage Jars  LocalPer unit price    
223Acrylic Trimmer Burs  ImportedPer unit price    
224Adam plier  ImportedPer unit price    
225Articulating Ribbon  ImportedPer unit price    
226Bench press large one  ImportedPer unit price    
227Buffing Wheels  ImportedPer unit price    
228Cold mould seal  ImportedPer unit price    
229Cold mould seal brushes  ImportedPer unit price    
230Curing tanks  ImportedPer unit price    
231Cylinder burs  ImportedPer unit price    
232Cylinder burs  ImportedPer unit price    
233Dentine Powder Self cure 1,2,3,4  ImportedPer unit price    
234Denture Adhesive Paste  ImportedPer unit price    
235Dental Hanging Motor, For Laboratory importedge 400 W RPM 18000, 5 speed round typre  ImportedPer unit price    
236Denture Trimmer Machine (Lathe Machine) with all accessories  ImportedPer unit price    
237Dewaxing unit  ImportedPer unit price    
238Disposable Boxes for Denture  Local/ importedPer unit price    
239Electric carver  ImportedPer unit price    
240Finishing Stones  ImportedPer unit price    
241Flasks  local/importedPer unit price    
242Flex acetal medium  ImportedPer unit price    
243Flex denture material  ImportedPer unit price    
244Flexible denture injection system machine ( with curing machine )  ImportedPer unit price    
245Flexible Denture Injection system machine with Accessories  ImportedPer unit price    
246Hanau Articulator  LocalPer unit price    
247Hard plaster bag of 25 kg for lab  ImportedPer unit price    
248Hard plaster pkt of 1 kg  ImportedPer unit price    
249Heat cure liquid  ImportedPer unit price    
250Heat cure powder  ImportedPer unit price    
251Heatless Wheels  ImportedPer unit price    
252High Shine Acrylic Polish Paste  ImportedPer unit price    
253Induction molding machine thermoplastic  ImportedPer unit price    
254Micro Motor for lab  ImportedPer unit price    
255mixing Bowls  LocalPer unit price    
256Mixing jars for acrylic  LocalPer unit price    
257Model Base Former( S,M,L)  ImportedPer unit price    
258Model Trimmer machine with all accessories  ImportedPer unit price    
259Modelling wax  ImportedPer unit price    
260Molloplast with primer  ImportedPer unit price    
261Plane Line Articulator  local/importedPer unit price    
262Plaster Cutters  LocalPer unit price    
263Plaster Knives  LocalPer unit price    
264Plaster Storage Jars  LocalPer unit price    
265Polishing Brushes  ImportedPer unit price    
266Polishing Chalk  ImportedPer unit price    
267Polishing Wheels  ImportedPer unit price    
268Pumice powder  ImportedPer unit price    
269Pumice brush  ImportedPer unit price    
270Retainer Sheet / Hard 1.5mm,2.0mm  ImportedPer unit price    
271Retainer sheet Soft 2mm  ImportedPer unit price    
272Rough Grinding Stone  ImportedPer unit price    
273Round Pliers  LocalPer unit price    
274Sand paper (320 patti)  LocalPer unit price    
275Sand paper mandrel  ImportedPer unit price    
276Sandpaper Sheets  ImportedPer unit price    
277Self-cure liquid  ImportedPer unit price    
278Self-cure powder  ImportedPer unit price    
279Soft plaster bag of 25 kg  Local/importedPer unit price    
280Spatulas  LocalPer unit price    
281Teeth Full set 633, 544, H3,H5,V2,V6(S,M,L)( Shade 1)  ImportedPer unit price    
282Teeth Full set 633,544,H3,H5,V2,V6 (S,M,L) ( Shade 2)  ImportedPer unit price    
283Teeth Full set 633,544,H3,H5,V2,V6 (S,M,L) ( Shade 3)  ImportedPer unit price    
284Teeth Full set 633,544,H3,H5,V2,V6 (S,M,L) ( Shade 4)  ImportedPer unit price    
285Teeth Full set 633,544,H3,H5,V2,V6 (S,M,L) ( Shade 6)  ImportedPer unit price    
286Teeth Full set 633,544,H3,H5,V2,V6 (S,M,L) ( Shade 7)  ImportedPer unit price    
287Teeth Partial sets Upper and lower 633,544,H3,H5,V2,V6 (S,M,L) ( Shade 2)  ImportedPer unit price    
288Teeth Partial sets Upper and lower 633,544,H3,H5,V2,V6 (S,M,L) ( Shade 3)  ImportedPer unit price    
289Teeth Partial sets Upper and lower 633,544,H3,H5,V2,V6 (S,M,L) ( Shade 4)  ImportedPer unit price    
290Teeth Partial sets Upper and lower 633,544,H3,H5,V2,V6 (S,M,L) ( Shade 6)  ImportedPer unit price    
291Teeth Partial sets Upper and lower 633,544,H3,H5,V2,V6 (S,M,L) ( Shade 7)  ImportedPer unit price    
292Tissue conditioner  ImportedPer unit price    
293Transparent heat cure powder  ImportedPer unit price    
294Transparent self-cure powder  ImportedPer unit price    
295Vulcanite burs  ImportedPer unit price    
296Wax Carvers  LocalPer unit price    
297Wax Knives  LocalPer unit price    
298Wax pot electric  ImportedPer unit price    
299Wire cutter  LocalPer unit price    
Prosthodontics
Sr. NoItem NameBrand NameRegistration NoManufactureRate per unitRate per UnitPack SizeRate Per PackSuppliers
300Acryl/Resin Universal Kit, Denture Polishing System, Extra-oral Use  ImportedPer unit price    
301Addition silicone light body/wash 50ml  ImportedPer unit price    
302Addition Silicone soft Putty 250 ml x2  ImportedPer unit price    
303Alginate CA37 (netherland)  ImportedPer unit price    
304Alginate hydrodent  importedPer unit price    
305Alginate Container local  LocalPer unit price    
306Articulating paper (20-60 micron) Strips Horseshoe Blue / Red Double Sided Booklet 6Bks/Bx (US)  ImportedPer unit price    
307Articulation paper holder, Miller's Forcep  ImportedPer unit price    
308Autoclave system B with vacum, with all accessories , 24 liter , LCD display  ImportedPer unit price    
309Broadrick's flag  ImportedPer unit price    
310Ceramic repair system kit, (US) Tetric EvoCeram Syringes 4 x 3g in shades A1, A2, A3, A3.5 Dentin   Per unit price    
311Chairside Crown Temporization Material Kit, 1 Cartridge 50 ml, A2; 16 Garant Mixing Tips (blue) 1 Garant Dispenser 4.1/10:1,(US)  ImportedPer unit price    
312DSLR Camera Canon series, EOS RP with lens, official warrenty from distributor  ImportedPer unit price    
313Crown Remover  ImportedPer unit price    
314Dental Surveyor  ImportedPer unit price    
315Denture adhesive cream waterproof zinc free 40grams  ImportedPer unit price    
316Diamond burs, Tapering round burs (TR12, TR13, TR 13C, TR 13F, TR14, TR 21, TR S14, TR26), Tapering flat series, TC11, TF11, TF12, TF 12C, TF13, TF 13F, TF14, TF S20, TF24, EX series: EX 11, Ex 12, WR series : WR 12, WR 13, WR 13C, FO series: FO 25, FO 32, Round burs (BR30, 31,32,33, 38, 39, 40), Stright flat series: (SF12, SF 11, SF 13, SF 14), Inverted cone SI 46, SI 45, HS Bur Diamond FG Maxima 834-021 M Depth Marker 0.5mm  ImportedPer unit price    
317Digital Caliper  ImportedPer unit price    
318Dressing Scissor  ImportedPer unit price    
319Dual Impression Trays (For right,left,posterior & Anteriror segment)  ImportedPer unit price    
320Fit Checker Advanced Occlimportedl Indicator Vnl Plythr Slcn VPS Tubes Package  ImportedPer unit price    
321Fully adjustable articulator with pantograpgh  ImportedPer unit price    
322Gothic arch tracer  ImportedPer unit price    
323Hemostatic gel (20% ferric sulphate) with delivery tips(1-1.2ml) IMPORTED  ImportedPer unit price    
324Impression compound (cake type) Germany  ImportedPer unit price    
325Impression compound (Green Stick Type) 125 gm, Germany  ImportedPer unit price    
326Impression Trays full Denture (Edentulous)  ImportedPer unit price    
327Impression Trays partial Denture (Dentate)  ImportedPer unit price    
328Indelible Pencils  ImportedPer unit price    
329Light body PVS mixing Gun 1:1  ImportedPer unit price    
330Lucia Jig Kit  ImportedPer unit price    
331Mollomet Kit  ImportedPer unit price    
332Molloplast B (soft denture liner, silicone based (Germany) 170 grams  importedPer unit price    
333Occlusion Foil Shimstock Boxed Roll, 5 m x 8 mm, Thin 8 Microns / 0.00032 in, (US)  ImportedPer unit price    
334Plaster cutter  ImportedPer unit price    
335Plaster cutter saw  ImportedPer unit price    
336Plaster Spatula  ImportedPer unit price    
337Polishing brushes  LocalPer unit price    
338Polishing Disk  ImportedPer unit price    
339Porcelain Polishing Paste Microdont Diamond Polishing Paste, Medium 3 ?, 1x3g  ImportedPer unit price    
340Pressure Indicator Paste Prosthetic Devices 2 oz (US)  ImportedPer unit price    
341Retraction cord packer (1.5mm, 2mm universal and round  ImportedPer unit price    
342Sand paper  LocalPer unit price    
343Sand paper manderal  LocalPer unit price    
344Self Adhesive Resin cement paste system with mixing tips  ImportedPer unit price    
345Semi Adjustable Articulator with facebow, transfer jig, 4 magnets  ImportedPer unit price    
346Shade Guide  ImportedPer unit price    
347Shade Guide (digital)  ImportedPer unit price    
348Silicon wash light body gun tips (Pack of 50) intraoral  ImportedPer unit price    
349Stone burs (different shapes)  ImportedPer unit price    
350Temporary Crowns anterior and posterior  ImportedPer unit price    
351Temporary Non Eugenol zinc oxide cement, US, 1 - 36g Base Paste; 1 - 16g Catalyst Paste;1 Mixing Pad  ImportedPer unit price    
352Tissue conditioner/ Soft liner, acrylic temporary lining material, 97ml x 100gram, made in Tokyo Imported  ImportedPer unit price    
353Tissue Holder Forcep  LocalPer unit price    
354Tungsten carbide burs (57, 1157)  ImportedPer unit price    
355Universal Curreter  LocalPer unit price    
356Vinyl Polysiloxane Bite Registration Material (Tube Dispensed), IMPORTED 50ml x4 (box)  ImportedPer unit price    
357Vulcanite burs  ImportedPer unit price    
358Wax Bite Sheet Normal modelling wax - Pink 20 pz. 450g Imported  ImportedPer unit price    
359Wax Carver  LocalPer unit price    
360Wax Knife  LocalPer unit price    
361Wire Cutter  LocalPer unit price    
362Wire Cutter (Heavy)  LocalPer unit price    
363Zinc Oxide Eugenol Free - Impression Paste 205g, made in netherland  ImportedPer unit price    
364Zip lock bags  ImportedPer unit price    
Operative Dentistry
Sr. NoItem NameBrand NameRegistration NoManufactureRate per unitRate per UnitPack SizeRate Per PackSuppliers
365Aluminum Chloride (Hemostatic Agent)  ImportedPer unit price    
366Amalgam alloy Powder  ImportedPer unit price    
367Amalgam capsule 2 spill Packet of 50  Imported/ImportedPer unit price    
368Amalgam capsule 3 spill Packet of 50  Imported/ImportedPer unit price    
369Anesthetic gel  ImportedPer unit price    
370Artery forceps curved small  Imported/LocalPer unit price    
371Barbed broaches pkt of 6  Imported/ImportedPer unit price    
372Bleaching kit single patient Hydrogen peroxide (35-40%)  Imported/ImportedPer unit price    
373Bonding agent 5th Generation  importedPer unit price    
374Bonding agent 7th or 8th generation 1 step self etch system  ImportedPer unit price    
375Bonding brush box of 100 pieces Micro applicator  ImportedPer unit price    
376Bulk fill composite tubes 4/5 gram  ImportedPer unit price    
377Burs 245 carbide  ImportedPer unit price    
378C+ file Stainless steel all size pkt of 6  ImportedPer unit price    
379Calcium hydroxide Powder  ImportedPer unit price    
380Calcium Hydroxide non-setting paste form without Idoform in syringe 30-35%  Imported/ImportedPer unit price    
381Cold Test (Ethyle Chloride/ Tetra Flouro Ethane)  ImportedPer unit price    
382Composite nanohybride A-2 shade  importedPer unit price    
383Composite nanohybride A-1 shade  importedPer unit price    
384Composite nanohybride A-3 shade  importedPer unit price    
385Composite nanoceramic Enamel and dentine shades bonding complete kit  ImportedPer unit price    
386Composite Cellulose strip  ImportedPer unit price    
387Composite finishing and polishing discs Kit  Imported/ImportedPer unit price    
388Composite finishing burs silicon  ImportedPer unit price    
389Composite finishing strips different color complete kit  ImportedPer unit price    
390Composite instrument kit Teflon Coated  Imported/ LocalPer unit price    
391Dycal setting calcium hydroxide  ImportedPer unit price    
392Dual cured self-adhesive paste system syringe form  ImportedPer unit price    
393EDTA gel  Imported/ImportedPer unit price    
394Electric Pulp Tester  ImportedPer unit price    
395Endo activator with Fiber Tips complete kit  ImportedPer unit price    
396Endo motor rotary with Reciprocal motion cordless  ImportedPer unit price    
397Endo post titanium Kit  ImportedPer unit price    
398Endo rings metal  ImportedPer unit price    
399Endo sealer Powder Liquid endo-methasone based  ImportedPer unit price    
400Endo sealer Powder Liquid zinc oxide based fast setting  ImportedPer unit price    
401Endodontic Box Steel  LocalPer unit price    
402Endodontic Explorer DG-16  LocalPer unit price    
403Endodontic irrigation needles 30 gauze  ImportedPer unit price    
404Endo-sealer Two paste System  ImportedPer unit price    
405Endodontic files retrieval system with trench drills  ImportedPer unit price    
406Ultrasonic Endodontic tips complete kit E series for endo file removal Wood-peeker  ImportedPer unit price    
407Ultrasonic Endodontic tips complete kit E series for retrograde preparation Wood-peeker  ImportedPer unit price    
408Bio-ceramic putty filling material for perforations  ImportedPer unit price    
409Etchant 37% Phosphoric Acid  ImportedPer unit price    
410Flowable nanohybride composite different shades  ImportedPer unit price    
411Fiber post and core system Kit  ImportedPer unit price    
412Finger Plungers All sizes, packs of 6  ImportedPer unit price    
413Finger Spreaders all sizes packs of 6  ImportedPer unit price    
414Fiber optic attachment for light cure  ImportedPer unit price    
415Gates glidden drill pkt of 06 assorted  ImportedPer unit price    
416Glass ionomer I Powder Liquid GC 1 luting  ImportedPer unit price    
417Glass ionomer II Powder Liquid GC II restorative  ImportedPer unit price    
418Gingival Curettes all numbers 1 to 12 stainless steel  Imported/ LocalPer unit price    
419Glass slabs for mixing  Imported/LocalPer unit price    
420Gutta percha cartridges Calamus dual compatible pack of 10, 20 Guage & 25 Guage  IMPORTEDPer unit price    
421Gutta percha point manual single 15 # (not assorted box)  ImportedPer unit price    
422Gutta percha point manual single 20 # (not assorted box)  ImportedPer unit price    
423Gutta percha point manual single 25 # (not assorted box)  ImportedPer unit price    
424Gutta percha point manual single 30 # (not assorted box)  ImportedPer unit price    
425Gutta percha point manual single 35# (not assorted box))  ImportedPer unit price    
426Gutta Percha manual single 40 # (not assorted box)  ImportedPer unit price    
427Gutta percha points F-1 with marking separate box (not assorted box)  ImportedPer unit price    
428Gutta percha points F-2 with marking separate box (not assorted box)  ImportedPer unit price    
429Gutta percha points protapers F-3 with marking separate box (not assorted box)  ImportedPer unit price    
430Gutta Percha manual 40-80  ImportedPer unit price    
431Gutta percha Solvents liquid  ImportedPer unit price    
432H file 15 to 40 all size packet of 6 , 25 mm  ImportedPer unit price    
433H Files# 45-80 packet of 6, 25 mm  IMPORTED/ ImportedPer unit price    
434Hand plugger titanium Buchanan all sizes complete kit  ImportedPer unit price    
435Hydrogen peroxide Liquid  LocalPer unit price    
436Intra canal Dressing Endoseptone  Imported/Per unit price    
437K Files# 45-80 packet of 6  IMPORTED/ ImportedPer unit price    
438K Files# 10 packet of 6, 25mm (not assorted box)  IMPORTED/ ImportedPer unit price    
439K file # 15 packet of 6, 25mm (not assorted box)  IMPORTED/ ImportedPer unit price    
440K file # 20 packet of 6, 25mm (not assorted box)  IMPORTED/ ImportedPer unit price    
441K file # 25 packet of 6, 25mm (not assorted box)  IMPORTED/ ImportedPer unit price    
442K file # 30 packet of 6, 25mm (not assorted box)  IMPORTED/ ImportedPer unit price    
443K file # 35 packet of 6, 25mm (not assorted box)  IMPORTED/ ImportedPer unit price    
444K file # 40 packet of 6 ,25 mm (not assorted box)  IMPORTED/ ImportedPer unit price    
445Lentulo spiral filler pkt of 6  ImportedPer unit price    
446Light cured cavity liner Paste Form in syringe 2 gram  ImportedPer unit price    
447Matrix band ivory Packet of 12  ImportedPer unit price    
448Matrix band straight Roll  ImportedPer unit price    
449Matrix Retainers  ImportedPer unit price    
450Mercury Liquid  ImportedPer unit price    
451MTA carrier straight and curved  ImportedPer unit price    
452MTA Powder and liquid  ImportedPer unit price    
453Paper point F1, F2, F3. separate boxes with marking  ImportedPer unit price    
454Paper Point Manual 15-40  ImportedPer unit price    
455Resin dual cure Core buildup material in gun form with mixing tips (pulp dent)  ImportedPer unit price    
456Periodontal Probes WHO with ball ended  ImportedPer unit price    
457Piezo reamer pkt of 6 assorted  ImportedPer unit price    
458Pit and fissure sealant (not flowable composite)  ImportedPer unit price    
459Reciprocal endodontic file All Sizes  ImportedPer unit price    
460Resin modified glass Ionomer power liquid  Imported/ImportedPer unit price    
461Retreatment files All Sizes  ImportedPer unit price    
462Rotary Protaper files all sizes assorted pack of 6  ImportedPer unit price    
463Rubber dam kit With clamps  ImportedPer unit price    
464Rubber dam sheets 6x6  Imported/ImportedPer unit price    
465SDR or equivalent  Imported/ImportedPer unit price    
466Sectional matrix system completes with rings  ImportedPer unit price    
467Slow speed round bur tungsten carbide various sizes  ImportedPer unit price    
468Sodium hypochloride Liquid  ImportedPer unit price    
469Stainless Steel filling Instrument Amalgam gun curved single ended all sizes  LocalPer unit price    
470Stainless Steel filling Instrument Burnisher Double Ended all sizes  LocalPer unit price    
471Stainless Steel filling Instrument Carver Double ended all sizes  LocalPer unit price    
472Stainless Steel filling Instrument Condenser all sizes  LocalPer unit price    
473Stainless Steel filling Instrument Dycal Applicator  LocalPer unit price    
474Stainless Steel filling Instrument Excavator Double ended all sizes  LocalPer unit price    
475Stainless Steel filling Instrument Plastic double ended all sizes  LocalPer unit price    
476Stainless steel cotton drums  LocalPer unit price    
477Stainless Steel filling Instrument Spatula  LocalPer unit price    
478Temporary Filling Materials  Imported/ImportedPer unit price    
479Ultarsonic Endodontic Tips metal files pack of 3-4  ImportedPer unit price    
480Wooden wedges,pack of 4 different sizes  ImportedPer unit price    
481Yellow coded composite finishing burs tapering  ImportedPer unit price    
482Zinc Phosphate Powder Liquid  Imported/ImportedPer unit price    
483Zincoxide eugenol slow setting type powder and liquid zonaline  ImportedPer unit price    
Phantom Head
Sr. NoItem NameBrand NameRegistration NoManufactureRate per unitRate per UnitPack SizeRate Per PackSuppliers
484Endo Blocks transparent  ImportedPer unit price    
485Handchisels (Staright+angled)  ImportedPer unit price    
486Nissin Lower left and right Central Incissor with secrew  ImportedPer unit price    
487Nissin Lower left and right Lateral Incissor with secrew  ImportedPer unit price    
488Nissin lower left and right canine with secrew  ImportedPer unit price    
489Nissin Lower Left Molar 1st with secrew  ImportedPer unit price    
490Nissin Lower Left Molar 2nd with secrew  ImportedPer unit price    
491Nissin Lower Left Premolar 1st with secrew  ImportedPer unit price    
492Nissin Lower Left Premolar 2nd with secrew  ImportedPer unit price    
493Nissin Lower Right Molar 1st with secrew  ImportedPer unit price    
494Nissin Lower Right Molar 2nd with secrew  ImportedPer unit price    
495Nissin Lower Right Premolar 1st with secrew  ImportedPer unit price    
496Nissin Lower Right Premolar 2nd with secrew  ImportedPer unit price    
497Nissin Upper left Central Incissor with secrew  ImportedPer unit price    
498Nissin upper right centeral incisor with secrew  ImportedPer unit price    
499Nissin upper left and right canine with secrew  ImportedPer unit price    
500Nissin upper right lateral incisor with secrew  ImportedPer unit price    
501Nissin Upper left Lateral Incissor with secrew  ImportedPer unit price    
502Nissin Upper Left Molar 1st with secrew  ImportedPer unit price    
503Nissin Upper Left Molar 2nd with secrew  ImportedPer unit price    
504Nissin Upper Left Premolar 1st with secrew  ImportedPer unit price    
505Nissin Upper Left Premolar 2nd with secrew  ImportedPer unit price    
506Nissin Upper Right Molar 1st with secrew  ImportedPer unit price    
507Nissin Upper Right Molar 2nd with secrew  ImportedPer unit price    
508Nissin Upper Right Premolar 1st with secrew  ImportedPer unit price    
509Nissin Upper Right Premolar 2nd with secrew  ImportedPer unit price    
Pedodontics
Sr. NoItem NameBrand NameRegistration NoManufactureRate per unitRate per UnitPack SizeRate Per PackSuppliers
510Apex locator  ImportedPer unit price    
511Anesthetic Gel (Benzocaine 20%)  ImportedPer unit price    
512Calcium hydroxide paste with iodoform  ImportedPer unit price    
513chair side space maintainer kit  ImportedPer unit price    
514chair side space maintainer kit refills  ImportedPer unit price    
515Contouring and crimping pliers for ss crown  ImportedPer unit price    
516Farric sulphate 15.5 % gel syringe  ImportedPer unit price    
517Paediatric rotary files, 1 file system  ImportedPer unit price    
518Paediatric rotary files packet of 6  ImportedPer unit price    
519Paediatric rotary files, 3 file system  ImportedPer unit price    
520Permanent molar SS crown Kit 48 pcs  ImportedPer unit price    
521Permanent molar SS crown refill  ImportedPer unit price    
522Primary teeth rubber dam clamp kit  ImportedPer unit price    
523Primary tooth SS crown kit 48 pcs  ImportedPer unit price    
524Primary tooth SS crown refill  ImportedPer unit price    
525Schilders plugger set  ImportedPer unit price    
526SDF 38% bottle  ImportedPer unit price    
527MTA putty syringe  ImportedPer unit price    
528Silver dimine fluoride 38%  ImportedPer unit price    
529SS crown cutting scissors curved and straight  ImportedPer unit price    
530Flowable Zinc Oxide Eugenol syringe primary tooth obturation material  ImportedPer unit price    
531Zinc Oxide Eugenol Slow setting  ImportedPer unit price    
532Intraoral scanner film size 1 compatible with Runyees  ImportedPer unit price    
Orthodontics
Sr. NoItem NameBrand NameRegistration NoManufactureRate per unitRate per UnitPack SizeRate Per PackSuppliers
533 Complete box of plastic having following items brackets, wires, instruments etc  ImportedPrice of complete box with all items brackets, wires and instruments   
 1Bracket Set Metal MBT prescription - Standard Size, monoblock, mesh sandblasted base, 0.022 slot, with laser tooth numbering on each bracket       
 2Wires -       
  Niti 0.12 U (ovoid) - 2 wires       
  Niti 0.14 U (ovoid) - 2 wires       
  NiTi 0.18 U (Ovoid) - 2 wires       
  S.S 0.18 U (ovoid) - 2 wires       
  Niti 19x25 U (ovoid) - 1 wire       
  S.S19x25 U (ovoid) - 2 wires       
  S.S17x25 U (ovoid) - 2 wires       
 3Power chain - Short 7.5ft       
 4Crimpable Shephard hooks - Long 6 pcs       
 5Long steel ties - 10 pcs       
 6Bondable buttons - 2 pcs       
 7Open coil spring - 180mm       
 8Metal abrasive strips double sided - 2 strips       
 9Elastics - 1/8 inch (5 pkts) heavy - 3/16 (5 pkts) heavy       
 10Molar tubes - 2 sets of 8 tubes total (first molars)       
 11Separators - 8 pcs       
 12Ligatures - Silver (2 pkts of 1000 pcs each)       
 13Retainer Sheet - 1.5mm hard 2 sheets       
 3. Instruments        
 1Mathews plier Tungsten carbide tip - 2       
 2Wiengart plier Tungsten carbide tip - 2       
 3Straight cutter Tungsten carbide tip - 2       
 4Distal end cutter Tungsten carbide tip - 2       
 5Bracket holders - 3       
 6Examination set - 1 (Mirror, tweezer, probe)       
534Hydroflouric acid etchant 9.6%  ImportedPer unit price    
5351st Molar band set 33-40(size) upper with auxillary tubes (Sandblasted)  ImportedPer unit price    
5361st Molar band set 33-40 (size) lower (Sandblasted)  Imported     
5372nd molar bands set 33-40 size Upper (Sandblasted)  ImportedPer unit price    
5382nd molar bands set 33-40 size Lower (Sandblasted)  ImportedPer unit price    
539Abrasive strips for IPR handpiece  Imported     
540Elastomeric Ligatures with 1040 strips each  ImportedPer unit price    
541TADS 8mm x 1.4 mm( with compatible screw driver straight + contrangled)  ImportedPer unit price    
542TADS 8mm x 1.6 mm ( with compatible screw driver straight + contrangled)  ImportedPer unit price    
543Retainer sheets vacuum-formed (Hard) 1.5 mm  ImportedPer unit price    
544Soldering rod with flux  ImportedPer unit price    
545Dental Flux  ImportedPer unit price    
546Endo Z Bur (21mm)  ImportedPer unit price    
547Scissors (TC tips )  ImportedPer unit price    
548Hinge articulators  ImportedPer unit price    
549Wire sleeve  ImportedPer unit price    
550Co axial wire  ImportedPer unit price    
551Retainer sheets vacuum-formed 2mm (soft)  LocalPer unit price    
552Acrylic plate expander mini screws  LocalPer unit price    
553Kobayashi hooks prefound stainless steel  LocalPer unit price    
554Rose torquing plier set  LocalPer unit price    
555Round plier tungsten carbide tip  LocalPer unit price    
556Bird beak plier tungsten carbide tip  LocalPer unit price    
557Wire tucker  LocalPer unit price    
558Cynching plier  LocalPer unit price    
559Band remover  LocalPer unit price    
560Band seater  LocalPer unit price    
561Band pucher  LocalPer unit price    
562Bracket remover  LocalPer unit price    
563Bracket seater  LocalPer unit price    
564Force measuring gauge orthodontic  LocalPer unit price    
565Bracket measuring gauge (boone gauge)  LocalPer unit price    
566IPR automatic diamond strips all sizes  LocalPer unit price    
567Micro etcher sandblasting machine with air compressor 40 ltrs  ImportedPer unit price    
568Bracket tweezer  LocalPer unit price    
569Molar tube holder  LocalPer unit price    
570Cheek Retractor autoclavable ( small,Medium, large)  ImportedPer unit price    
571Contraangle screw driver for TADS  ImportedPer unit price    
572Premolar bands set Upper sizes 6-10 Assorted sizes  ImportedPer unit price    
573Premolar bands set Lower sizes 6-10 Assorted sizes  ImportedPer unit price    
574Ortho bracket bonding kit  US/ Europe / JapanPer unit price    
575Retraction coil springs NiTi (6mm)  ImportedPer unit price    
576White ortho stone  Italy/ europePer unit price    
577Patient files  LocalPer unit price    
578Patient cast box  LocalPer unit price    
579Heavy wire cutter  LocalPer unit price    
580Wax knife  LocalPer unit price    
581Dappen dishes  LocalPer unit price    
582Coarse/ fine sand paper  LocalPer unit price    
583Polishing wheel for lathe machine  LocalPer unit price    
584Transparent self cure and liquid and monomer  LocalPer unit price    
585Wax carver  LocalPer unit price    
586Mixing bowels  LocalPer unit price    
587Carbide burs for micromotor  LocalPer unit price    
588Finishing burs for micromotor  LocalPer unit price    
589Safetly glasses  LocalPer unit price    
590Spirit lamp  LocalPer unit price    
591Spirit bottle  LocalPer unit price    
592Model base former  LocalPer unit price    
593Pumice powder fine for electro polishing brush  LocalPer unit price    
594Cold moulde seal  LocalPer unit price    
595Cold moulde brush  LocalPer unit price    
596Micromotor marathone  LocalPer unit price    
597Zip lock bags  LocalPer unit price    
598Retainers box plastic  LocalPer unit price    
599Lingual cleats for welding  LocalPer unit price    
600100 ml bottle of monomer  LocalPer unit price    
601Polishong wheel for micromotor  LocalPer unit price    
602Aluminium oxide powder 50 microns  LocalPer unit price    
603Diode laser 8W/980Nm (portable)  Imported (biolase)Per unit price    
604Dental Electrocautery (multiple modes, portable)  ImportedPer unit price    
605Dental 3d Printer (DLP type)  Imported (Anycubic Photon Mono M7 pro)Per unit price    
606Dolphin 3D imaging software with Graphic card and High spec Laptop  ImportedPer unit price    
607Intra Oral Scanner with compatible laptop  Imported (Runeyes)Per unit price    
608Trolley for intraoral scanner with compatible computer and accessories  Imported (runeyes)Per unit price    
Periodontology
Sr. NoItem NameBrand NameRegistration NoManufactureRate per unitRate per UnitPack SizeRate Per PackSuppliers
609LED Ultrasonic Piezo Scaler  ImportedPer unit price    
610Air Polisher/ prophy  ImportedPer unit price    
611Ultrasonic Scaler Detachable LED Handpiece  ImportedPer unit price    
612Adson Forceps (toothed/non-toothed)   Per unit price    
613After Five® Gracey Curettes   Per unit price    
614Air Polisher Prophylaxis Powder  ImportedPer unit price    
615AP-H Plus Dental Air Polisher  ImportedPer unit price    
616Bone grafting kit complete   Per unit price    
617Buser Periosteal Elevator   Per unit price    
618Castroviejo scissors   Per unit price    
619Co-axial wire   Per unit price    
620Corn suture plier   Per unit price    
621Electro cautery for dental (bonart)  ImportedPer unit price    
622Furcation Curette   Per unit price    
623GC Tooth Mouse   Per unit price    
624Goldman-Fox Knife   Per unit price    
625Goldman-Fox Scissor - Curved   Per unit price    
626Goldman-Fox Scissor - Straight   Per unit price    
627Gracey's Curettes complete set   Per unit price    
628Kirkland Periodontal Knife   Per unit price    
629Michigan 'O' Probe with Williams Marking   Per unit price    
630Micromotor (Straight and Contra-angled)  ImportedPer unit price    
631Microscalpel Blade   Per unit price    
632Mini-Five Gracey Curettes™   Per unit price    
633Model and Brush - SRP Jaw Model [PER2001-UL-SP-FEM-32] - Nissin Imported  ImportedPer unit price    
634Model and Brush- Periodontal disease model (PE-PER010) - Nissin Imported  ImportedPer unit price    
635Non-Eugenol periodontal dressing (Coe-Pak)   Per unit price    
636Nupro Extra Care Prophy Paste with Fluoride and NovaMin®   Per unit price    
637Orban's Knife   Per unit price    
638Periotomes - Straight, Angled, Reversed, Concaved   Per unit price    
639Polishing brushes pkt of 100   Per unit price    
640Polishing Paste (Detartrine)   Per unit price    
641Polishing paste cup nupro        
642PRP/PRF Box Instrument Set   Per unit price    
643Sharpening Stone   Per unit price    
644Sickle Scaler   Per unit price    
645Spill Kit - Complete Kit  ImportedPer unit price    
646Surgical Suction tips (Metal 3 or 4mm)   Per unit price    
647Vicryl 3/0, 4/0, 5/0  ImportedPer unit price    
Dental Implants
Sr. NoItem NameBrand NameRegistration NoManufactureRate per unitRate per UnitPack SizeRate Per PackSuppliers
648Dental Implants titanium SLA surface with standard titanium abudment  KoreanPer unit price    
649Angled abudment compatiable with provided dental implants 15 & 25 degree  KoreanPer unit price    
650Lab analogue compatiable with provided dental implants  Korean/Per unit price    
651Healing Abudment compatiable with provided dental implants  Korean/Per unit price    
652Impression coping compatiable with provided dental implants  Korean/Per unit price    
653Implant scan bodies compatiable with provided implants  Korean/Per unit price    
654Dental Implants titanium grade 5 with standard abudment laser lock  USA/ EuropePer unit price    
655Angled abudment compatiable with provided dental implants 15 & 25 degree  USA/ EuropePer unit price    
656Lab analogue compatiable with provided dental implants  USA/ EuropePer unit price    
657Healing Abudment compatiable with provided dental implants  USA/ EuropePer unit price    
658Impression coping compatiable with provided dental implants  USA/ EuropePer unit price    
659Lab analogue compatiable with provided dental implants  USA/ EuropePer unit price    
660Implant scan bodies compatiable with provided implants  USA/ EuropePer unit price    
661Implant Physiodespenser with all accessories and attachments  ImportedPer unit price    
662Implant stability tester  ImportedPer unit price    
663Periodontology membrane 15x20mm size Resorbable membrane  ImportedPer unit price    
664Cortical cancellous bone 0.5cc  ImportedPer unit price    
665Sinus lifting kit complete drills  ImportedPer unit price    
Ceramic Lab
Sr. NoItem NameBrand NameRegistration NoManufactureRate per unitRate per UnitPack SizeRate Per PackSuppliers
666Ceramic crown/bridge, Zirconia, Multi layer, any shade, any tooth or Implant, Lab work/fabrication  LocalPer unit price    
667Ceramic crown/bridge, E-Max, Multi layer, any shade, any tooth or Implant Lab work/fabrication  LocalPer unit price    
668PFM crown/bridge, Metal Bego, Ceramic Nova, any shade, any tooth or Implant Lab work/fabrication  LocalPer unit price    
669Cast Pertial denture, Metal Cobalt chromium Bego, Teeth Acrylic Pigeon, Heat cure acrylic, Full per arch irrespective of no of teeth Lab work/fabrication  LocalPer unit price    
670Complete denture, Heat cure acrylic, teeth pegion, Lab work/fabrication  LocalPer unit price    
671Partial denture, Heat cure acrylic, teeth pegion, Lab work/fabrication  LocalPer unit price    
672Obturator heat cure acrylic, with teeth acrylic pigeon Lab work/fabrication  LocalPer unit price    
673Orthodontic Appliances Lab work/fabrication  LocalPer unit price    
Oral Surgery OMFS
Sr. NoItem NameBrand NameRegistration NoManufactureRate per unitRate per UnitPack SizeRate Per PackSuppliers
674Adult Forcep Kit  LocalPer unit price    
675Alies Forcep  LocalPer unit price    
676Alveo Gel  ImportedPer unit price    
677Apexo Set  LocalPer unit price    
678Arch Bar  LocalPer unit price    
679Artery Curve  LocalPer unit price    
680Artery Straight  LocalPer unit price    
681Bone filer  LocalPer unit price    
682Bone rongeur  LocalPer unit price    
683Cotry tips cutting & couglation  importedPer unit price    
684Cow horn force  LocalPer unit price    
685Cross bar  LocalPer unit price    
686Cryer  LocalPer unit price    
687Culture Swab Kit  ImportedPer unit price    
688Curetts  LocalPer unit price    
689Decidious forcep kit  LocalPer unit price    
690Dextrose  ImportedPer unit price    
691Doyen mouth gag (Adult)  LocalPer unit price    
692Doyen mouth gag (children)  LocalPer unit price    
693Dressing scissor  LocalPer unit price    
694Excavator surgical  LocalPer unit price    
695Gelatin Sponge  ImportedPer unit price    
696Glucose  ImportedPer unit price    
697Heavy grip wire cutter  LocalPer unit price    
698Instrumental boxes Large  LocalPer unit price    
699Killner  LocalPer unit price    
700Laser Diode 980nm Dual/ triple wavelength,power upto 8 W, surgical, periodontal,whitening tips with all accessories and fiber tips, touch screen, removable and autoclaveable handle  ImportedPer unit price    
701Lower BD forceps  LocalPer unit price    
702Minisota retractor  LocalPer unit price    
703Mitchell trimmer  LocalPer unit price    
704Mosquito Curve  LocalPer unit price    
705Needle Holder  LocalPer unit price    
706Nelton Drain Different Sizes  ImportedPer unit price    
707Oscillating saw  ImportedPer unit price    
708Perio pack  LocalPer unit price    
709Piezoelectric machine with all accessories & tips  ImportedPer unit price    
710Periosteal elevator  LocalPer unit price    
711Polyfax  ImportedPer unit price    
712Proline suture 4/0 & /50  ImportedPer unit price    
713Pyodine large+ Scrub  ImportedPer unit price    
714Right Angle Retractor  LocalPer unit price    
715Ringer solution 1000cc  ImportedPer unit price    
716Root tip pick  LocalPer unit price    
717Round & straight surgical bur  ImportedPer unit price    
718Scalpal Handle  LocalPer unit price    
719Silk suture 1/0 & 2/0  ImportedPer unit price    
720Silk Suture 3/0  ImportedPer unit price    
721Skin hook  LocalPer unit price    
722Small surgical currete(lucas)  LocalPer unit price    
723Small trays  LocalPer unit price    
724Soft Wire Cutter  LocalPer unit price    
725Spirit Ammonia  ImportedPer unit price    
726Steel suction tip broad  LocalPer unit price    
727Straight Elevator 2,4,6  LocalPer unit price    
728Straight wire plier  LocalPer unit price    
729Suture Cutting scissor  LocalPer unit price    
730Suture Vicryl 3/0  ImportedPer unit price    
731Tissue forcep non tooth  LocalPer unit price    
732Tissue forcep tooth  LocalPer unit price    
733Tooth Brushes  ImportedPer unit price    
734Towel forceps  LocalPer unit price    
735Upper Anterior BDR  LocalPer unit price    
736Upper BD forceps  LocalPer unit price    
737Upper Posterior BDR  LocalPer unit price    
738valcnid bur  ImportedPer unit price    
739Wire Holder  LocalPer unit price    
740Wire tucker  LocalPer unit price    
741Xylocaine without adrenaline  ImportedPer unit price    
742Sponge Holding Forcep  LocalPer unit price    
743Scalpel handle Bp No.03  LocalPer unit price    
744Straight Suture Cutting Scissor 7 Inch  LocalPer unit price    
745Dental Probe 7 Inch  LocalPer unit price    
746Mitchells Trimmer  LocalPer unit price    
747Tweezer Forcep  LocalPer unit price    
748Howarth's Elevator  LocalPer unit price    
749Straight Elevator  LocalPer unit price    
750Babcock Forcep 12 Inch  LocalPer unit price    
751Small Bowl  LocalPer unit price    
752Kidney Tray  LocalPer unit price    
753Cat'spaw Retractor  LocalPer unit price    
754Wire Cutter  LocalPer unit price    
755Plate Holding Forcep  LocalPer unit price    
756Mouth Gag Heister  LocalPer unit price    
757Plate Bending Plier  LocalPer unit price    
758Mouth Prop Set Of 3 Pcs  LocalPer unit price    
759Wire Tucker  LocalPer unit price    
760Wire Twister Small  LocalPer unit price    
761Models for MMF  LocalPer unit price    
762Wire 0.4mm  LocalPer unit price    
763Wire Holder  LocalPer unit price    
764Plating Kit  LocalPer unit price    
765Sponge Holding Forcep  LocalPer unit price    
766Scalpel handle Bp No.03  LocalPer unit price    
767Straight Suture Cutting Scissor 7 Inch  LocalPer unit price    
768Dental Probe 7 Inch  LocalPer unit price    
769Mitchells Trimmer  LocalPer unit price    
770Tweezer Forcep  LocalPer unit price    
771Howarth's Elevator  LocalPer unit price    
772Straight Elevator  LocalPer unit price    
773Babcock Forcep 12 Inch  LocalPer unit price    
774Small Bowl  LocalPer unit price    
775Kidney Tray  LocalPer unit price    
776Cat'spaw Retractor  LocalPer unit price    
777Wire Cutter  LocalPer unit price    
778Plate Holding Forcep  LocalPer unit price    
779Mouth Gag Heister  LocalPer unit price    
780Maxillary disimpaction forcep  LocalPer unit price    
781Plate Bending Plier  LocalPer unit price    
782Mouth Prop Set Of 3 Pcs  LocalPer unit price    
783Wire Tucker  LocalPer unit price    
784Wire Twister Small  LocalPer unit price    
785Models for MMF  LocalPer unit price    
786Wire 0.4mm  LocalPer unit price    
787Wire Holder  LocalPer unit price    
788Plating Kit  LocalPer unit price    
789Sponge Holding Forcep  LocalPer unit price    
790Scalpel handle Bp No.03  LocalPer unit price    
791Zygomatic row elevator adult size  LocalPer unit price    
792Bristows elevators  LocalPer unit price    
793Mallet steel handle  LocalPer unit price    
794Smith bone spreader  LocalPer unit price    
795Tessier maxillary mobilizer pair R +L  LocalPer unit price    
796Bone chisel steel handle set R + L  LocalPer unit price    
797Bone osteome steel handle 6,8, 10 mm  LocalPer unit price    
798Pterygoid chiesel  LocalPer unit price    
799Nasal septal chisel double guard  LocalPer unit price    
800Septal osteotomes  LocalPer unit price    
801Farebouf Rejoin Curved retractor  LocalPer unit price    
802Hyton William forcep  LocalPer unit price    
803Walsham nasal forcep pair R + L  LocalPer unit price    
804Ash forceps pair R + L  LocalPer unit price    
805Rib Respirator Pair   Per unit price    
806Rib Cutter   Per unit price    
807Bone Reduction Forceps   Per unit price    
808Dingman Retractor   Per unit price    
809Bone Nubler S/A   Per unit price    
810Bone Nibbler D/A   Per unit price    
811Kern Bone Holding Forceps Right Left   Per unit price    
812Wire Cutter/Plate Cutter (Double Action Tc)   Per unit price    
813Wire Cutter Tc (Single Action)   Per unit price    
814Distal End Cutter Wire   Per unit price    
815Maxillary Awl   Per unit price    
816Madibuler Awl   Per unit price    
817Zygomatic Awl   Per unit price    
818Debakey Forceps   Per unit price    
819Langenbeck Retractor (L-M-S)   Per unit price    
820Reverse Toe Out Retractor   Per unit price    
821Ramus Retractor   Per unit price    
822Racks Retractor   Per unit price    
823Kilner Cheek Retractor (M-S)   Per unit price    
824Channel Retractor   Per unit price    
825Austin Retractor   Per unit price    
826Minesota Retator   Per unit price    
827Tongue Depressor   Per unit price    
828Bowdler Henly Retractor   Per unit price    
829Chalzian Retractor   Per unit price    
830Poswillows Zygoma Bone Hook   Per unit price    
831Mitchell Trimmer   Per unit price    
832Bone File   Per unit price    
833Bolley Gauge Caliper   Per unit price    
834Scalpel Handel Round   Per unit price    
835Ward Periosteal Elevator        
 Molt Periosteal Elevator.        
 Freer Periosteal 1:Levator        
 Howarth Periosteal Elevator   Per unit price    
836Skin Hook Single)) Pair   Per unit price    
837Skin Hook Double End Pair   Per unit price    
838Orbtal Retractor (1-M-S) Set Of 3 |        
 Malliable Retractor        
 Bone Curettee D/ E        
 Bone Currettewolkmann        
 Ellis Tissue Lissueforcep 6", 7"        
 Artery Forceps 7" (Strandcvd) Sml        
 Kocher Forceps 7" (Strand Cvd)        
 Artery Forceps 6" (Strandcvd)        
 Small.Artery Forceps(Mosquito) 5" Strandcvd        
 Necdle Holder 6"        
 Needle Holder 7"        
 Wire Holder 6" Tc   Per unit price    
839Wire Holder 7" Tc        
 Wire Twister Large Tc        
 Tissue Forceps 6" 4.5"        
 Tissue Forceps 7"        
 Mayo Scissors 7"        
 Disseting Scissors 7"        
 Iris Scissors 4.5 Ss   Per unit price    
840Iis Scissors 4.5" Tc        
 Teneotomy Scissors 4.5"        
 Teneotomy Scissors 6"        
 Dissecting Scissors 6" With Sterilization Box        
 Transbuccal Trocar Set (Synthes) With Tc        
 Dissecting Scissors 7" Tc        
 Wire Cutter Scissors 5" Tc        
 Micndoe Scissors 6" "Tc   Per unit price    
841Tissue Forceps 6" Tc |)        
 Tissue Forcep 7" Tc        
 Nasal Speculam        
 Frazier Suction Tip        
 Yanker Suction        
 Long Drill Bit 90        
 Castrvijo Scissors 6" Tc 87        
 Castrvijo Needle Holder 6" Tc        
 Condylar Set Of 7 Pieces With Sterilization Box        
 Plate Bender Mini   Per unit price    
842Screw Driver        
 Plate Holder        
 Towel Clips        
 Cheatel Forcep        
 Instruments Box Stainless Steel (Autocleavable) 16x8x4_        
 Instruments Box Aluminum (Autocleavable) Large   Per unit price    
843Plates And Screws        
 Recon Screw (2.7mm) 12mm        
 Recon Screw (2.7mm) 10mm        
 Recon plate 2.7mm full, Right and left        
 Mesh Plate Mini        
 Mesh Plate Micro        
 Micro Screw 5mm, 6mm, 9mm        
 Drill Bit micro and mini 1.5 7mm        
 Drill Bit Recon 2.7mm        
 Mini System Imf Screw 2.0mm        
 Mini Plate L        
 Mini Plate X        
 Mini Plate Y        
 Micro Plate L        
 Micro Plate X        
 Micro Plate Y        
 Recon 2.7mm Straight        
 Recon Screw Driver 2.7mm        
 Micro 1.8mm (Er) Screw 5mm        
 Micro 1.8mm (Er) Screw 6mm        
 Micro 1.8mm (Er) Screw 7mm        
 Drill Bit 1.5mm/10mm        
 Mini 9mm        
 Mini Screw 5mm        
 Mini Screw 7mm        
 Mini Screw 12mm        
 Mini Emergency Screw 5mm        
 Mini Emergency Screw 7mm        
 Mini Emergency Screw 9mm        
 Drill Bids (Recon, Mini and Micro)   Per unit price    
844Prolene Suture 3.0, 4.0, 5.0, 6.0   Per unit price    
845Vicryl Suture 2.0, 4.0   Per unit price    
846Sample Collection Vials (Blue, Yellow, Red, Purple)   Per unit price    
847Napkins (Drape sheets)   Per unit price    
848Surgical Gloves 5.5, 6.0, 6.5, 7.0, 7.5, 8.0   Per unit price    
849Wire Roll 0.4, 0.5, 0.6mm   Per unit price    
850Polyfax eye ointment   Per unit price    
Dental Compressors and Suction Machine
Sr. NoItem NameBrand NameRegistration NoManufactureRate per unitRate per UnitPack SizeRate Per PackSuppliers
851Dental compressors( 3 cylinder head compressor, Motor 3 phase ) Cattani  ItalyPer unit price    
852Suction machine with two motors working for 25-30 units  Italy and EquivalentPer unit price    
853Solonid valuve for cup filler  importedPer unit price    

Item: OPERATION THEATER MEDICINE AND EQUIPMENT

UNSPSC: Drugs or medicine production services

Specifications / Requirementsss:

School of Dentistry, Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad
Anesthesia Equipment and materials
Sr noItemBrand nameManufacturePrice per unitPack sizeRate per pack
1ETCO2 MAINSTREAM PROBE importedPer unit price  
2EMERGENCY CYLINDER ATTACHED TO VENTILATOR MACHINE N2O O2 As per specificationPer unit price  
3BIS ELECTRODES ImportedPer unit price  
4AED PADs importedPer unit price  
5ART LINE TRANSDUCERS (any make) importedPer unit price  
6SODALIME CANISTERS localPer unit price  
7SYRINGES DISPOSABLE BUCKET LARGE LocalPer unit price  
8WASTE BIN (RED, YELLOW, BLUE) ACC TO ISO CERTIFICATE LARGE SIZE importedPer unit price  
9BOUGIES ADULT SIZE & PAEDS SIZE importedPer unit price  
10STYLETS ImportedPer unit price  
11FACE MASK FOR OT (RUBBER) 1-5 SIZE ImportedPer unit price  
12FACE MASK FOR POST OP (NORMAL) ImportedPer unit price  
13SUPRAGLOTTIC DEVICES ( LMAs) ImportedPer unit price  
14I GELS (1,1.5,2,2.5,3 & 4) ImportedPer unit price  
15VENTILATORS ( Intelligent Ventilators preferably Swiss/ Importedese or German make) ImportedPer unit price  
16ILLUMINATORS Large size for 2-3 xray LocalPer unit price  
17ULTRASOUND MACHINE (Chinese, German, Japenes )WITH THREE PROBES 1(FIXED ARRAY) 2(CURVILINEAR)3(STRAIGHT) ImportedPer unit price  
18Mc-Coy Laryngoscope ImportedPer unit price  
19Vedio Larngoscope ImportedPer unit price  
20Flexible Bronchoscope ImportedPer unit price  
21Supraglottic Airway/ I-gell ImportedPer unit price  
22Intubating bougies ImportedPer unit price  
23Stylets ImportedPer unit price  
24Emergency surgical airways kit ImportedPer unit price  
25Magill forcep  Per unit price  
26Arterial line cannulation kit ImportedPer unit price  
27Central venous catheters ImportedPer unit price  
28Double lumen catheters importedPer unit price  
29Pressure transducer set ImportedPer unit price  
30BIS/EEG electrode ImportedPer unit price  
31Pressure infusor bags importedPer unit price  
32Invasive monitoring cables ImportedPer unit price  
33Ultrasound machine ImportedPer unit price  
34Surgi prep spray ImportedPer unit price  
35Drape set importedPer unit price  
36LIGHT SOURCE FOR OT As per specificationPer unit price  
37HEAD RING SMALL & ADULT ImportedPer unit price  
38CROCK SHOES LocalPer unit price  
39CIRCUIT FOR ANESTHESIA MAPELSON-A ImportedPer unit price  
40CIRCUIT FOR ANESTHESIA MAPELSON-D ImportedPer unit price  
41CIRCUIT FOR ANESTHESIA MAPELSON-E ImportedPer unit price  
42McCONTOSH SHEET LocalPer unit price  
43ECG Machine, Chinese, German ImportedPer unit price  
44Scrub area wash basin steel large size with accessories and sensors Local/ImortedPer unit price  
45Beur hegger warmer ImportedPer unit price  
46Screen/separator/curtains LocalPer unit price  
47Hapa filter control importedPer unit price  
48Pre op / anesthesia/pacu paper ImportedPer unit price  
49Rechargeable battery supply for OT gases workstation, Item no 0208700, Battries leon/Leon Plus 2x12 volt each with 7.2 Ah ImportedPer unit price  
50ETCO2 MAINSTREAM PROBE ImportedPer unit price  
51EMERGENCY CYLINDER ATTACHED TO VENTILATOR MACHINE N2O O2 As per specificationPer unit price  
52BIS ELECTRODES ImportedPer unit price  
53AED PADs ImportedPer unit price  
54ART LINE TRANSDUCERS (any make) ImportedPer unit price  
55MONORAPID 1 LITER ImportedPer unit price  
56PYODINE SCRUB 1 LITER LocalPer unit price  
57PYODINE SOLUTION LocalPer unit price  
58FROMALINE LocalPer unit price  
59VARIKON ImportedPer unit price  
60GAUZE 4/4 LocalPer unit price  
61R/L 1000ML LocalPer unit price  
62N/S 1000ML LocalPer unit price  
63PAEDS SALINE 500ML LocalPer unit price  
64HEAMACCEL 500ML LocalPer unit price  
65STICKING COTTON LocalPer unit price  
66POLYFEX EYE/OINTMENT LocalPer unit price  
67RIBBON GAUZE LocalPer unit price  
68STERILIZE GOWN disposable LocalPer unit price  
69SURGICAL GLOVES (SIZE 8 ) pkt of 10 ImportedPer unit price  
70SURGICAL GLOVES (6.5, 7, 7.5,) pkt of 10 ImportedPer unit price  
71SURGICAL CAP LocalPer unit price  
72SHOE COVER LocalPer unit price  
73BANDAGE CRAPE ImportedPer unit price  
74ECG ELECTRODE ImportedPer unit price  
75CaNULAS: size 18 & 24 LocalPer unit price  
76CANULAS: (18G,20G,22G,24G) LocalPer unit price  
77ETT: size 4, 5, 6, 6.5 ImportedPer unit price  
78ETT: size 5.5 ImportedPer unit price  
79ETT: (SIZE 7, 7.5, 8, ImportedPer unit price  
80NORTH POLES (SIZE 6.5) ImportedPer unit price  
81REINFORED (SIZE 7, 7.5, 8) ImportedPer unit price  
82CVP SETS (ARROW/B BRAUN) ImportedPer unit price  
83BRAUN EPIDURAL SETS ImportedPer unit price  
84NG TUBES size 12 LocalPer unit price  
85SUCTION CATHETER (SIZE 08, 10, 12) ImportedPer unit price  
86FOLEY'S TUBES size 12 ImportedPer unit price  
87LINEN SHEETS WITH PILLOW & blanket LocalPer unit price  
88HOLE SHEETS LocalPer unit price  
89HOSPITAL WARD SCREENS fiber LocalPer unit price  
90OXYGEN FLOW METER BOTTLES ImportedPer unit price  
91TUBLING FOR SUCTION BOTTLES ImportedPer unit price  
92STERLIZE SHEET ImportedPer unit price  
93Iv sets LovalPer unit price  
94Three way ImportedPer unit price  
95Bt sets ImportedPer unit price  
96Long lead ImportedPer unit price  
97Shot lead ImportedPer unit price  
98HEPA FILTER ImportedPer unit price  
99OXYGEN cylinder with flowmeter, regulator, face mask & trolly 6 liter localPer unit price  
100Oxygen cylinder with flowmeter , regulator & face mask 6 liter LocalPer unit price  
101Nitrogen e-cylinder, 10liter Leon plus ImportedPer unit price  
102Oxygen E cylider, 10 liter leon plus ImportedPer unit price  
103Oxygen refill per KG/liter LocalPer unit price  
104Nitrogrn refill per KG/liter localPer unit price  
Drugs for OT & Ward
Sr. noItemBrand nameManufacturePrice per unitPack sizeRate per pack
1Adrenaline 1gm/vial  Per unit price  
2Atropine 1gm/vial  Per unit price  
3Calcium Gluconate 10%  Per unit price  
4Dextrose Water 25%  Per unit price  
5Dobutamine 250mg  Per unit price  
6Noradenaline 4mg/ml  Per unit price  
7Phenylephrine 10mg/vial  Per unit price  
8Ketamine 500mg/5ml  Per unit price  
9Dormicum 5mg/ml  Per unit price  
10Propofol 1% 200mg/vial  Per unit price  
11Nalbuphine 10mg/vial  Per unit price  
12Ketorolac 30mg/1ml  Per unit price  
13Fentanyl 500mg/10ml  Per unit price  
14Atracurium 50mg/5ml  Per unit price  
15Paracetamol 1gm/ml  Per unit price  
16Dexmedetomidine 200mg/2ml  Per unit price  
17Suxamethonium 80mg/3ml  Per unit price  
18IV Xylocaine 2%/10ml  Per unit price  
19Bupivacaice 5%/5ml  Per unit price  
20Metoprolol 10mg/5ml  Per unit price  
21Transamine 500mg  Per unit price  
22Labetolol 10mg  Per unit price  
23Glyceryl Trinitrite  Per unit price  
24Isokit (Glyceryl dinitrite)  Per unit price  
25Manitol 20% I/V  Per unit price  
26Omeprazole I/V  Per unit price  
27Hydralozine I/V  Per unit price  
28Papaverine I/V  Per unit price  
29Xylocaine Nasal Spray  Per unit price  
30Loparimide  Per unit price  
31Solucortif 100mg/vial  Per unit price  
32Dexamethasone 4mg/ml  Per unit price  
33Diphenhydramine (Gravinate) 15mg/ml  Per unit price  
34Odansetron 8mg  Per unit price  
35Glycopyrrolate 0.2mg/1ml  Per unit price  
36Nesotigmine +Glycopyrolate 2.5mg/ml+0.2mg/0.5ml  Per unit price  
37Ventolin Inhaler  Per unit price  
38Tramadol (campex) 100mg  Per unit price  
39Naloxone 0.4mg/vial  Per unit price  
40Amikacin  Per unit price  
41Ceftriaxone 1g  Per unit price  
42Flagyl 500ml I/V  Per unit price  
43Xylocaine Gel  Per unit price  
44Glucometer  Per unit price  
45Glucose Strips  Per unit price  
46Isoflorane  Per unit price  
47Sevoflorane  Per unit price  
48Syringes (size 1ml)  Per unit price  
49Syringes (size 3ml, 5ml, 10ml, 20ml)  Per unit price  
50Syringes (size 50 and 60 ml)  Per unit price  
51Syringes Big nozzle  Per unit price  
52Insulin Regular (70/30)  Per unit price  
53Insulin Syringes  Per unit price  
54Heparin  Per unit price  
55Tab. Angised  Per unit price  
56Tab. Disprin  Per unit price  
57Tab Glucophage  Per unit price  
58cap transamine500mg  Per unit price  
59Tab. Loratadine  Per unit price  
60Tab Valium  Per unit price  
61Tab. Inderol  Per unit price  
62Tab. Ponston  Per unit price  
63Tab. Calpol  Per unit price  
64Tab. Falgyl  Per unit price  
65Tab. Motilium  Per unit price  
66Tab Torex IR  Per unit price  
67Tab Rasbid  Per unit price  
68Tab Ponstonforte  Per unit price  
69Cap. Amoxil  Per unit price  
70Tab. Midazolam  Per unit price  
71Tab Aspirin 300 Dispersable  Per unit price  
72Endo tracheal Tube size 7  Per unit price  
73Ventolin Inhaler  Per unit price  
74Syrup Burfen  Per unit price  
75Syrup Panadol  Per unit price  
76Saniplast  Per unit price  
77Ammonia Solution  Per unit price  
78Bandage  Per unit price  
79Galaxose D Sachests  Per unit price  
80Inj Dicloran  Per unit price  
81Inj. Adrenaline  Per unit price  
82Inj Dextrose  Per unit price  
83Inj Decadron  Per unit price  
84Inj Transamine  Per unit price  
85Inj Avil  Per unit price  
86Inj Gravinate  Per unit price  
87Inj Oxidil  Per unit price  
88Inj Valium  Per unit price  
89Inj Dextrose 5/IV infusion  Per unit price  
90Ambu bag with tubing  Per unit price  
91Flumexanil I/V  Per unit price  

Item: MEDICAL EQUIPMENT

UNSPSC: Medical equipment and instrument disinfectant washing equipment

Specifications / Requirementsss:

School of Dentistry, Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad
Medical and Dental Labs Equipment
Sr noItem nameBrandManufacturePer unit pricePack sizePer pack rate
1Anemia slides ImportedPer unit price  
2Apoptosis ImportedPer unit price  
3Assorted microscope slides ImportedPer unit price  
4Assorted sample collection tubes ImportedPer unit price  
5Automatic tissue processor ImportedPer unit price  
6Beakers 100 ml, graduated ImportedPer unit price  
7Beakers 500 ml, graduated ImportedPer unit price  
8Blood group tiles ImportedPer unit price  
9Centrifuge machine ImportedPer unit price  
10complete urine examination kit ImportedPer unit price  
11Data acquisition system ImportedPer unit price  
12EDTA ,SEUM ,PT APTT bottles ImportedPer unit price  
13Electrial balance ImportedPer unit price  
14glass beakers 500ml ImportedPer unit price  
15hemodynamics ImportedPer unit price  
16incubator 37 degree ImportedPer unit price  
17Inflammation slides ImportedPer unit price  
18Leukaemia slides ImportedPer unit price  
19markers ImportedPer unit price  
20microbiology culture plates ImportedPer unit price  
21Microscope Binoculars ImportedPer unit price  
22Microscope Multihead ImportedPer unit price  
23Microscope slide projector system ImportedPer unit price  
24microtome ImportedPer unit price  
25necrosis ImportedPer unit price  
26neoplasia ImportedPer unit price  
27oven wax embedding ImportedPer unit price  
28parafin embedding bath ImportedPer unit price  
29petri dishes ImportedPer unit price  
30stain dropping bottles ImportedPer unit price  
31stained slides of gen path ImportedPer unit price  
32staining jars ImportedPer unit price  
33staining racks (adjustable) ImportedPer unit price  
34swab sticks ImportedPer unit price  
35swabs ImportedPer unit price  
36wash bottles ImportedPer unit price  
37Water bath ImportedPer unit price  
38Centrifuge machine Speed up to 4000rpm Centrifuge Tube5ml, 10,ml,15ml ImportedPer unit price  
39Gel electrophoresis apparatus Horizontal Electrophoresis System, include gel casting tray and combs ImportedPer unit price  
40Incubators LCD Display Stainless Steel Chamber Oral Biology ImportedPer unit price  
41Mixed dentition study models High quality resin representations of both primary and permanent Teeth for educational purpose ImportedPer unit price  
42Single tooth mould Good Quality, Silicon Rubber, Dental Rubber ImportedPer unit price  
43Tooth & Oral Structures anatomical Study Models (Skull, Facial Muscles, mandible, muscles of mastication, tooth,etc.) Good Quality, Precise Dimension ImportedPer unit price  
44Flourosis model ImportedPer unit price  
45Edentulous model arches Good Quality, Precise dimension ImportedPer unit price  

Item: QUEUE MANAGEMENT SYSTEM

UNSPSC: Queue numbering system

Specifications / Requirementsss:

School of Dentistry, Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad
Queue Management System
Client RequirementsItem Quoted by Vendor with specification
No.Item NameDescriptionQtyItem NameDescriptionQtyITEC comments
1Queue Management Software and Integration. (API connectivity with REST, HTTP, Web socket, UTT, Mobile, JDBC supported)Queue management core features with segmentation and categories, rules – based routing, multi queuing calling, Staff work profiles and individual login, Auto email notification and reporting to managers Customization ticket and text Statistical data of served categories, waiting time, serving time, Integration options with CRM, web and mobile based, API connectivity with REST, HTTP, Web sockets< SOAP, UTT, Mobile, JDBC2    
2Printer (Token Machine)5 Ticket Buttons, Ethernet connection, Standalone PC less printer, Built in server in printer, Thermal printer head, no ink or toner, Token machine should have screen size of min 17 inches, Multi queuing options, Dual printer (Compulsory), Ticket (dispenser / Token machines should have dual printers with fall over facility. If one printer gets out of paper, then second printer should be operational automatically)10    
3Counter DisplayRed Color LED (4 Digit) LED matrix single line in red color connectible with bell or announcement10    
4Calling Pad / Calling SoftwareCall Next customer Transfer Call / Tickets Close Counter10    
550’ LED TV or Higher50” Smart Backlight LED TV, Resolution 1920*1080 full HD, Built in speaker7    
6Audio Announcement DeviceAmplifier &Speakers10 Amplifier & 10 Speaker    
7QMS Network Switch/Hub/CablingInstallation, Commission of QMS Network solution including Multiport 8/12/16/24 QMS Network Switches/Hubs, Ducting/Wiring, Cable and Power Cable, Connectors, PVC/Flexible Pipe, Supplies etc and any other items required for execution of complete QMS Solution. Preferably, CAT 6 cabling for establishmentAs per Job description    
8ServicesCommissioning, Integration, Training & Testing and After Sales Services for One (01) year from the date of Installation.As per Job description    

Price Schedule

For Individual Items

# Item Title Quantity Unit Price (PKR) Total Price (PKR) Delivery Location Delivery Period / Year Country of Origin
1
2
For Lots
# Lot Title Total Lot Price (PKR) Country of Origin
1 [Lot 1 Title]

📑 General Conditions of Contract (GCC)

Annual Tender 2026-27 for Dental Material and Instruments/OT Medicines/Lab Equipment/Miscellaneous Hospital Items and Queue Management System

Published on: Friday, September 11, 2026 12:27 PM

Ref# : P108739
QR Code

A. General

1. Definitions

1.1 Unless the context otherwise requires, the following terms whenever used in this Contract shall have the same meaning and shall be interpreted as indicated
  1. “Applicable Law” means the laws and any other instruments having the force of law in the Government’s Country, or in such other country as may be specified in the Special Conditions of the Contract (SC), as they may be issued and in force from time to time;
  2. “Procuring Agency” means:-
    1. any Ministry, Division, Department or any Office of the Government;
    2. any authority, corporation, body or organization established by or under a Law or which is owned or controlled by the Government;.
  3. “The Contract” means an agreement enforceable by law;
  4. “The Contract Price” means the price payable to the Bidder under the Contract for the full and proper performance of its contractual obligations;
  5. “Ancillary Services” means those services ancillary to the provision  of Goods, such as transportation and insurance, and any other incidental services, such as installation, commissioning, provision of technical assistance, training, and other such obligations of the Bidder covered under the  Contract;
  6. “GCC” means the General Conditions of Contract contained in this section;
  7. “SCC” means the Special Conditions of Contract by which the GCC may be amended or supplemented;
  8. “Day” means calendar day unless indicated otherwise.
  9. “Effective Date” means the date on which this Contract comes into force and effect.
  10. The Bidder” means the individual or corporate body whose Bids to provide the Goods has been accepted by the Procuring Agency;
  11. “The Project Site,” where applicable, means the place or places named in Bids Data Sheet and technical Specifications;
  12. “Government” means the Government of Pakistan;
  13. “Subcontractor” means any entity to which the Bidder subcontracts any part of the Goods.
  14.  "Service" means any object of procurement other than goods or works;
  15. “Party” means the Procuring Agency or the Bidder, as the case may be, and “Parties” means both of them;
  16. “Foreign Currency” means any currency other than the currency of the country of the Procuring Agency;
  17. “Completion Date” means the date of completion of the contract by the Bidder as certified by the Procuring Agency;
  18.  “In Writing” means communicated in written form with proof of receipt;
  19. “Local Currency” means the currency of Pakistan;

2. Application and Interpretation

2.1 These General Conditions shall apply to the extent that they are not superseded by provisions of other parts of the Contract.

2.2 In interpreting these Conditions of Contract headings and marginal notes are used for convenience only and shall not affect         their interpretations unless specifically stated; references to singular include the plural and vice versa; and masculine include the feminine. Words have their ordinary meaning         under the   language   of   the   Contract   unless specifically defined.

3. Applicable Law

3.1 The contract shall be governed and interpreted in accordance with the laws of Pakistan, unless otherwise specified in SCC.

4. Governing Language

4.1 The Contract as well as all correspondence and documents relating to the Contract exchanged between the Bidder and the Procuring Agency, shall be written in the English language unless otherwise stated in the SCC.  Supporting documents and printed literature that are part of the Contract may be in another language provided these are accompanied by an accurate translation of the relevant passages in English, in which case, for purposes of interpretation of the Contract, this translation shall govern.

5. Notices

5.1 Any notice, request, or consent made pursuant to this Contract shall be in writing and shall be deemed to have been made when delivered in person to an authorized representative of the Party to whom the communication is addressed, or when sent by registered mail, telex, telegram, or facsimile to such Party at the address specified in the SCC.

6. Delivery/Location

6.1 The Goods shall be delivered to such locations as the Procuring Agency may approve and as specified in SCC.

7. Authorized Representatives / Authority of Member in charge

7.1 Any action required or permitted to be taken, and any document required or permitted to be executed, under this Contract by the Procuring Agency or the Bidder may be taken or executed by the officials specified in the SCC.

B. Commencement, Completion, Modification, and Termination of Contract

8. Effectiveness of Contract

8.1 This Contract shall come into effect on the date the Contract is signed by both parties and such other later date as may be stated in the SCC.

9. Commencement of Services

9.1 The Bidder shall confirm availability of Key Experts and begin carrying out the Services not later than the number of days after the Effective Date specified in the SCC.

10. Program

10.1 Before commencement of the Services, the Bidder shall submit to the Procuring Agency for approval a Program showing the general methods, arrangements, order and timing for all activities. The Services shall be carried out in accordance with the approved Program as updated.

11. Starting Date/Expiration Date

11.1 The Bidder shall start carrying out the Services Five (05) days after the date the Contract becomes effective, or at such other date as may be specified in the SCC.

11.2 Unless terminated earlier pursuant to Clause GCC 15 hereof, this Contract shall expire at the end of such time period after the Effective Date as specified in the SCC.

12. Entire Agreement

12.1 This Contract contains all covenants, stipulations and provisions agreed by the Parties.  No agent or representative of either Party has authority to make, and the Parties shall not be bound by or be liable for, any statement, representation, promise or agreement not set forth herein.

13. Modification

13.1 Any modification or variation of the terms and conditions of this Contract, including any modification or variation of the scope of the Services, may only be made by written agreement between the Parties. However, each Party shall give due consideration to any Bids for modification or variation made by the other Party.

13.2 In cases of any modifications or variations, the prior written consent of the Procuring Agency is required.

14. Force Majeure

14.1 Definition

For the purposes of this Contract, “Force Majeure” means an event which is beyond the reasonable control of a Party and which makes a Party’s performance of its obligations under the Contract impossible or so impractical as to be considered impossible under the circumstances.

14.2 No Breach of Contract

The failure of a Party to fulfill any of its obligations under the contract shall not be considered to be a breach of, or default under, this Contract in so far as such inability arises from an event of Force Majeure, provided that the Party affected by such an event (a) has taken all reasonable precautions, due care and reasonable alternative measures in order to carry out the terms and conditions of this Contract, and (b) has informed the other Party as soon as possible about the occurrence of such an event.

14.3 Extension of Time

Any period within which a Party shall, pursuant to this Contract, complete any action or task, shall be extended for a period equal to the time during which such Party was unable to perform such action as a result of Force Majeure.

14.4 Payments

During the period of their inability to perform the Services as a result of an event of Force Majeure, the Bidder shall be entitled to continue to be paid under the terms of this Contract, as well as to be reimbursed for additional costs reasonably and necessarily incurred by them during such period for the purposes of the Services and in reactivating the Service after the end of such period.

15. Termination

15.1 By the Procuring Agency

The Procuring Agency may terminate this Contract in case of the occurrence of any of the events specified in paragraphs (a) through (e) of this Clause. In such an occurrence the Procuring Agency shall give at least thirty (30) calendar days’ written notice of termination to the Bidder in case of the events referred to in (a) through (d); at least sixty (60) calendar days’ written notice in case of the event referred to in (e);

  1. If the Bidder fails to remedy a failure in the performance of its obligations hereunder, as specified in a notice of suspension;
  2. If the Bidder becomes (or, if the Bidder consists of more than one entity, if any of its members becomes) insolvent or bankrupt or enter into any agreements with their creditors for relief of debt or take advantage of any law for the benefit of debtors or go into liquidation or receivership whether compulsory or voluntary;
  3. If the Bidder fails to comply with any final decision reached as a result of arbitration proceedings;
  4. If, as the result of Force Majeure, the Bidder is unable to perform a material portion of the Services for a period of not less than sixty (60) calendar days;
  5. If the Procuring Agency, in its sole discretion and for any reason whatsoever, decides to terminate this Contract;

15.2 By the Bidder

The Bidder may terminate this Contract, by not less than thirty (30) calendar days’ written notice to the Procuring Agency, in case of the occurrence of any of the events specified in paragraphs (a) through (d) of this Clause.

  1. If the Procuring Agency fails to pay any money due to the Bidder pursuant to this Contract and not subject to dispute within forty-five (45) calendar days after receiving written notice from the Bidder  that such payment is overdue.
  2. If, as the result of Force Majeure, the Bidder is unable to perform a material portion of the Services for a period of not less than sixty (60) calendar days.
  3. If the Procuring Agency fails to comply with any final decision reached as a result of arbitration.
  4. If the Procuring Agency is in material breach of its obligations pursuant to this Contract and has not remedied the same within forty-five (45) days (or such longer period as the Bidder may have subsequently approved in writing) following the receipt by the Procuring Agency of the Bidder’s notice specifying such breach.

C.  Obligations of the Bidder

16. General

16.1 Standard of Performance

  1. The Bidder shall deliver the product and carry out the Services with all due diligence, efficiency and economy, in accordance with generally accepted professional standards and practices, and shall observe sound management practices, and employ appropriate technology and safe and effective equipment, machinery, materials and methods. The Bidder shall always act, in respect of any matter relating to this Contract or to the Services, as a faithful adviser to the Procuring Agency, and shall at all times support and safeguard the Procuring Agency’s legitimate interests in any dealings with the third parties.

16.2 Law Applicable to Goods

The Bidder shall deliver the goods in accordance with the Contract and in accordance with the Law of Pakistan and shall take all practicable steps to ensure that any of its Experts and Sub-Bidders, comply with the Applicable Law. 

17. Conflict of Interests

17.1 Bidder Not to Benefit from Commissions and Discounts.

The remuneration of the Bidder shall constitute the Bidder’s sole remuneration in connection with this Contract or the Services, and the Bidder shall not accept for their own benefit any trade commission, discount, or similar payment in connection with activities pursuant to this Contract or to the Services or in the discharge of their obligations under the Contract, and the Bidder shall use their best efforts to ensure that the Personnel, any Subcontractors, and agents of either of them similarly shall not receive any such additional remuneration.

17.2  Bidder and Affiliates Not to be Otherwise Interested in Project

The Bidder agree that, during the term of this Contract and after its termination, the Bidder and its affiliates, as well as any Subcontractor and any of its affiliates, shall be disqualified from providing Goods for any project resulting from or closely related to the Services.

17.3  Prohibition of Conflicting Activities

Neither the Bidder nor its Subcontractors nor the Personnel shall engage, either directly or indirectly, in any of the following activities:

  1. during the term of this Contract, any business or professional activities in the Government’s country which would conflict with the activities assigned to them under this Contract;
  2. during the term of this Contract, neither the Bidder nor their Subcontractors shall hire public employees in active duty or on any type of leave, to perform any activity under this Contract;

18. Confidentiality

18.1 Except with the prior written consent of the Procuring Agency, the Bidder and the Experts shall not at any time communicate to any person or entity any confidential information acquired in the course of the contract.

19. Insurance to be Taken Out by the Bidder

19.1 The Bidder(a) shall take out and maintain, and shall cause any Subcontractors to take out and maintain, at its (or the Subcontractors’, as the case may be) own cost but on terms and conditions approved by the Procuring Agency, insurance against the risks, loss or damage, and for the coverage, as shall be specified in the SCC; and (b) at the Procuring Agency’s request, shall provide evidence to the Procuring Agency showing that such insurance has been taken out and maintained and that the current premiums have been paid.

20. Bidder’s Actions Requiring Procuring Agency’s Prior Approval

20.1 The Bidder shall obtain the Procuring Agency’s prior approval in writing before taking any of the following actions:

(a)    appointing such members of the Personnel not provided by the Bidder;

(b)    changing the Program of activities; and

(c)     any other action that may be specified in the SCC.

21. Reporting Obligations

21.1 The Bidder shall submit to the Procuring Agency the reports and documents in the numbers, and within the periods as prescribed by the Procuring Agency.

22. Liquidated Damages

22.1  If the Supplier fails to deliver any or all of the Goods or to perform the Services within the period(s) specified in the Contract, the Procuring Agency shall, without prejudice to its other remedies under the Contract, deduct from the Contract Price, as liquidated damages, a sum equivalent to the percentage specified in SCC of the delivered price of the delayed Goods or unperformed Services for each week or part thereof of delay until actual delivery or performance, up to a maximum deduction of the performance security (or guarantee) specified in SCC. Once the said maximum is reached, the Procuring Agency may consider termination of the Contract pursuant to GCC Clause 15.

22.2  Correction for Over-payment

If the Intended Completion Date is extended after liquidated damages have been paid, the Procuring Agency shall correct any overpayment of liquidated damages by the Bidder by adjusting the next payment certificate.  The Bidder shall be paid interest on the overpayment, calculated from the date of payment to the date of repayment, at the rates specified in SCC.

22.3  Lack of performance penalty

If the Bidder has not corrected a Defect within the time specified in the Procuring Agency’s notice, a penalty for Lack of performance will be paid by the Bidder. The amount to be paid will be calculated as a percentage of the cost of having the Defect corrected, assessed as specified in the SCC.

23. Performance Guarantee

23.1 Within Seven (07) days from the issuance of acceptance letter from the Procuring Agency, the successful Bidder shall furnish the Performance Guarantee in shape of ------- at the discretion of the PA in the amount specified in SCC. In case the amount of   Bids security is equal or greater than

23.2 The proceeds of the Performance Guarantee shall be payable to the Procuring agency as compensation for any loss resulting from the Supplier’s failure to complete its obligations under the Contract.

23.3 The Performance Guarantee shall be denominated in the currency of the Contract, or in a freely convertible currency acceptable to the Procuring agency and shall be in the acceptable form as specified in SCC.

23.4 The Performance Guarantee will be discharged by the Procuring agency and returned to the Supplier not later than thirty (30) days following the date of completion of the Supplier’s performance obligations under the Contract, including any warranty obligations, unless otherwise specified in SCC.

24. Fraud and Corruption

24.1 The Procuring Agency requires the Supplier to disclose any commissions or fees that may have been paid or are to be paid to agents or any other party with respect to the Bidding process or execution of the Contract. The information disclosed must include at least the name and address of the agent or other party, the amount and currency, and the purpose of the commission, gratuity or fee.

25. Sustainable Procurement

25.1 The Bidder shall conform to the sustainable procurement contractual provisions, if and as specified in the SCC.

D. Bidder’s Personnel

26. Description of Personnel

26.1 The titles, agreed job descriptions, minimum qualifications, and estimated periods of engagement in the carrying out of the Services of the Bidder’s Key Personnel.  The Key Personnel listed by title as well as by name are hereby approved by the Procuring Agency.

27. Removal and/or Replacement of Personnel

27.1 Except as the Procuring Agency may otherwise agree, no changes shall be made in the Key Personnel.  If, for any reason beyond the reasonable control of the Bidder, it becomes necessary to replace any of the Key Personnel, the Bidder shall provide as a replacement a person of equivalent or better qualifications.

27.2 If the Procuring Agency finds that any of the Personnel have (i) committed serious misconduct or have been charged with having committed a criminal action, or (ii) have reasonable cause to be dissatisfied with the performance of any of the Personnel, then the Bidder shall, at the Procuring Agency’s written request specifying the grounds thereof, provide as a replacement a person with qualifications and experience acceptable to the Procuring Agency.

27.3 The Bidder shall have no claim for additional costs arising out of or incidental to any removal and/or replacement of Personnel.

E.  Obligations of the Procuring Agency

28. Assistance and Exemptions

28.1 The Procuring Agency shall use its best efforts to ensure that the Government shall provide the Bidder such assistance and exemptions as specified in the SCC.

29. Change in the Applicable Law

29.1 If, after the date of this Contract, there is any change in the Applicable Law with respect to taxes and duties which increases or decreases the cost of the related Services rendered by the Bidder, then the remuneration and reimbursable expenses otherwise payable to the Bidder under this Contract shall be increased or decreased accordingly by agreement between the Parties, and corresponding adjustments shall be made to the amounts referred in the SCC.

30. Services and Facilities

30.1 The Procuring Agency shall make available to the Bidder and the Experts, for the purposes of the Services and free of any charge, the services, facilities and property described , at the times and in the manner specified in the SCC or terms of reference.

30.2 In case that such services, facilities and property shall not be made available to the Bidder, the Parties shall agree on (i) any time extension that it may be appropriate to grant to the Bidder for the performance of the Services, (ii) the manner in which the Bidder shall procure any such services, facilities and property from other sources, and (iii) the additional payments, if any, to be made to the Bidder as a result thereof.

F. Payments to the Bidder

31. Contract Price

31.1 The price payable shall be in Pakistani Rupees unless otherwise specified in the SCC. Prices charged by the Supplier for Goods delivered under the Contract shall not vary from the prices quoted by the Supplier in its Bid.

32. Terms and Conditions of Payment

32.1 Payments will be made to the Bidder according to the payment schedule stated in the SCC and as per actual invoice submitted by the Bidder.

32.2 Unless otherwise stated in the SCC, the advance payment shall be made against the provision by the Bidder of a bank guarantee for the same amount, and shall be valid for the period stated in the SCC.  Any other payment shall be made after the conditions listed in the SCC for such payment have been met, and the Bidder have submitted an invoice to the Procuring Agency specifying the amount due.

33. Currency of Payment

33.1 Any payment under this Contract shall be made in the currency(ies) specified in the SCC.

G. Quality Control

34. Identifying Defects

34.1 The principle and modalities of Inspection of the Goods by the Procuring Agency shall be as indicated in the SCC. The Procuring Agency shall check the Bidder’s performance and notify him of any Defects that are found.  Such checking shall not affect the Bidder’s responsibilities.  The Procuring Agency may instruct the Bidder to search for a Defect and to uncover and test any service that the Procuring Agency considers may have a Defect. Defect Liability Period is as defined in the SCC.

35. Correction of Defects,and

Lack of Performance Penalty

35.1 The Procuring Agency shall give notice to the Bidder of any Defects before the end of the Contract.  The Defects liability period shall be extended for as long as Defects remain to be corrected.

35.2 Every time notice a Defect is given, the Bidder shall correct the notified Defect within the length of time specified by the Procuring Agency’s notice.

35.3 If the Bidder has not corrected a Defect within the time specified in the Procuring Agency’s notice, the Procuring Agency will assess the cost of having the Defect corrected, the Bidder will pay this amount, and a Penalty for Lack of Performance.

36. Taxes and Duties

36.1 A Supplier shall be entirely responsible for all taxes, duties, fees, etc., incurred until delivery of the contracted Goods to the Procuring Agency.

H. Settlement of Disputes

37. Alternate Dispute Resolution

37.1 The disputes between the parties to the contract may be settled in accordance with Public Procurement Rules, 2004.

37.2 The procuring agency shall refer the matter to the Chief Justice Islamabad High Court or Managing Director PPRA or the Secretary Ministry of Law & Justice for appointment of Arbitrator.

37.3 The fee for the Arbitrator shall be specified in Pak Rupees as determined by the appointing authority which shall be borne and shared equally by the contracting parties.

📑 Special Conditions of Contract (SCC)

Annual Tender 2026-27 for Dental Material and Instruments/OT Medicines/Lab Equipment/Miscellaneous Hospital Items and Queue Management System

Published on: Friday, September 11, 2026 12:27 PM

Ref# : P108739
QR Code

SECTION VIII. SPECIAL CONDITIONS OF CONTRACT

The following Special Conditions of Contract shall supplement the General Conditions of Contract. Whenever there is a conflict, the provisions herein shall prevail over those in the Conditions of Contract. The corresponding clause number of the GCC is indicated in parentheses.

Number of GC Clause

Amendments of, and Supplements to, Clauses in the General Conditions of Contract

Number of GC Clause 1

Definitions

The Procuring Agency is: SZABMU, School of Dentistry (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad), Purchase Officer Room # 27, Ground Floor, SOD SZABMU, Ravi Road, Sector G-8/3., Islamabad Capital Territory

The Supplier is:

The title of the subject procurement is: Annual Tender 2026-27 for Dental Material and Instruments/OT Medicines/Lab Equipment/Miscellaneous Hospital Items and Queue Management System

Number of GC Clause 3

Applicable/Governing Law:

The Contract shall be interpreted in accordance with the laws of Islamic Republic of Pakistan

Number of GC Clause 4

Language:

The language of the Contract, all correspondence and communications to be given, and all other documentation to be prepared and supplied under the Contract shall be in English.

Number of GC Clause 5

Notices:

The addresses for the notices are:

Procuring Agency: 

SZABMU, School of Dentistry (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad), Purchase Officer
Room # 27, Ground Floor, SOD SZABMU, Ravi Road, Sector G-8/3., Islamabad Capital Territory
+92-334-562-4796
sodpurchaseofficer@szabmu.edu.pk

Contractor/ Bidder: 

 [Name, address and telephone number].

The Contractor/ Bidder’s Representative(s)

[Name, address, telephone number and e-mail address]

Number of GC Clause 7.1

The Authorized Representatives are:

For the Procuring Agency:

SZABMU, School of Dentistry (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad), Purchase Officer
Room # 27, Ground Floor, SOD SZABMU, Ravi Road, Sector G-8/3., Islamabad Capital Territory
+92-334-562-4796
sodpurchaseofficer@szabmu.edu.pk

For the Bidder:

Name: ………………………

Designation: ……………..

Address: ……………………………..

Number of GC Clause 8

Effectiveness of the contract

Number of GC Clause 9

Commencement of Contract:

Number of GC Clause 11.2

Expiration of Contract:

Number of GC Clause 15

Termination

In the event of termination of the contract due to any reason as already defined in the General Conditions of Contract, the Bidder shall be responsible for providing to the Authority the Goods till the time of alternate arrangements.

Number of GC Clause 17

Conflict of Interest:

The Procuring Agency reserves the right to determine on a case-by-case basis whether the Bidder should be disqualified from providing goods or services due to a conflict of a nature described in Clause GCC 17.

Number of GC Clause 22

Liquidated Damages 

If the Bidder fails to provide services as required under the contract or in case of any data loss/data breach or any incident compromising the data security or other such failures related to any services, the Bidder shall pay to the Procuring Agency as Liquidated Damages at a rate of 0.50% to 1.00% of the Contract value, in accordance with the extent of performance failure & the cost of investigating such incidents as judged by the Authority.

Number of GC Clause 23

Performance Guarantee:

The amount of performance guarantee shall be 0% of the contract price in acceptable form of Nil

Number of GC Clause 32

Payment terms:

Payment will be made to the Bidder against the procured Goods and services according to the actual invoice or running bills submitted by the Bidder against the services provided within the time given in the conditions of the contract.

Number of GC Clause 33

Currency of Payment:

All the payment to be released to the contractor/Bidder shall be in Pakistani Rupees.

Number of GC Clause 34

Identifying Defects:

The Authority reserves the right at any time to inspect the premises of the provider to inspect the goods and monitor the goods being provided.

Inspections & Tests Requirements

For being Brand New, bearing relevant reference numbers of the equipment (Certificate from supplier)

For Physical Fitness having No Damages (Certificate from supplier)

For the Country of Origin as quoted by the Supplier (Certificate from manufacturer)

For conformance to specifications and performance parameters, through Prior to delivery inspection (Inspection Report by Procurement Committee / Inspection Team)

For successful operation at site after complete installation, testing and commissioning of the equipment (Installation, Testing and Commissioning Report by Procurement Committee / Inspection Team)

Delivery & Documents

Copies of the Supplier’s invoice showing Goods’ description, quantity, unit price, and total amount;

Original and two copies of the usual transport document (for example, a negotiable bill of lading, a non-negotiable sea waybill, an inland waterway document, an air waybill, a railway consignment note, a road consignment note, or a multimodal transport document) which the buyer may require to take the goods;

Copies of the packing list identifying contents of each package;

Insurance Certificate;

Manufacturer’s or Supplier’s Valid Warranty Certificate;

Inspection Certificate issued by the Nominated Inspection Agency (if any), and the Supplier’s Factory Inspection Report;

Certificate of Origin.

The above documents would be required even if the equipment has already been imported and is available with the supplier ex-stock

Number of GC Clause 37

Following is the guidance for Dispute Resolution

  1. If any dispute of any kind whatsoever shall arise between the Authority and the Bidder in connection with or arising out of the Contract, including without prejudice to the generality of foregoing, any question regarding its existence, validity, termination and the execution of the Contract – whether during developing phase or after their completion and whether before or after the termination, abandonment or breach of the Contract – the parties shall seek to resolve any such dispute or difference by mutual diligent negotiations in good faith within 14 (fourteen) days following a notice sent by one Party to the other Party in this regard.
  2. At future of negotiation the dispute shall be resolved through mediation and mediator shall be appointed with the mutual consent of the both parties.
  3. At the event of failure of mediation to resolve the dispute relating to this contract such dispute shall finally be resolved through binding Arbitration by sole arbitrator in accordance with Arbitration Act 1940. The arbitrator shall be appointed by mutual consent of the both parties. The Arbitration shall take place in Islamabad, Pakistan and proceedings will be conducted in English language. 
  4. The cost of the mediation and arbitration shall be shared by the parties in equal proportion however the both parties shall bear their own costs and lawyer’s fees regarding their own participation in the mediation and arbitration. However, the Arbitrator may make an award of costs upon the conclusion of the arbitration making any party to the dispute liable to pay the costs of another party to the dispute.
  5. Arbitration proceedings as mentioned in the above clause regarding resolution of disputes may be commenced prior to, during or after completion of the contract.

Notwithstanding any reference to the arbitration herein, the parties shall continue to perform their respective obligations under the Contract unless they otherwise agree that the Authority shall pay the Bidder any monies due to the Bidder.

Rules of procedure for arbitration proceedings: 

Any dispute between the Authority and a Bidder who is a national of the Islamic Republic of Pakistan arising in connection with the present Contract shall be referred to adjudication or arbitration in accordance with the laws of the Islamic Republic of Pakistan including Arbitration Act 1940, however above provision shall prevail in referring the case to the Arbitrator.

Place of Arbitration and Award:

The arbitration shall be conducted in English language and place of arbitration shall be at Islamabad. The award of the arbitrator shall be final and shall be binding on the parties.

📑 Bid Securing Declaration (BSD)

Annual Tender 2026-27 for Dental Material and Instruments/OT Medicines/Lab Equipment/Miscellaneous Hospital Items and Queue Management System

Published on: Friday, September 11, 2026 12:27 PM

Ref# : P108739
QR Code

Form 9: Bid Securing Declaration

Date: [insert date (as day, month and year)]

Bid No.:P108739

To: SZABMU, School of Dentistry (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad), Purchase Officer Room # 27, Ground Floor, SOD SZABMU, Ravi Road, Sector G-8/3., Islamabad Capital Territory

 

 

We, the undersigned, declare that:

We understand that, according to your conditions, Bids must be supported by a Bid Securing Declaration.

We accept that we will be blacklisted and henceforth cross debarred  for participating in respective category of public procurement proceedings for a period of (not more than) six months, if fail to abide with a bid securing declaration, however without indulging in corrupt and fraudulent practices, if we are in breach of our obligation(s) under the Bid conditions, because we:

  1. have  withdrawn  or  modified  our  Bid  during  the  period  of  Bid  Validity specified in the Form of Bid;
  2. Disagreement to arithmetical correction made to the Bid price; or
  3. having been notified of the acceptance of our Bid by the Procuring Agency during the period of Bid Validity, (i) failure to sign the contract if required by Procuring Agency to do so or (ii) fail or refuse to furnish the Performance Security or to comply with any other condition precedent to signing the contract specified in the Bidding Documents.

We understand this Bid Securing Declaration shall expire if we are not the successful

Bidder, upon the earlier of (i) our receipt of your notification to us of the name of the successful Bidder; or (ii) twenty-eight (28) days after the expiration of our Bid.

 

📑 Contract Form (CNF)

Annual Tender 2026-27 for Dental Material and Instruments/OT Medicines/Lab Equipment/Miscellaneous Hospital Items and Queue Management System

Published on: Friday, September 11, 2026 12:27 PM

Ref# : P108739
QR Code

SECTION IX: CONTRACT FORMS

 

THIS AGREEMENT made the _____ day of __________ 20_____ between SZABMU, School of Dentistry (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad), Purchase Officer Room # 27, Ground Floor, SOD SZABMU, Ravi Road, Sector G-8/3., Islamabad Capital Territory

 (hereinafter called “the Procuring Agency”) of the one part and [name of Bidder] of [city and country of Bidder] (hereinafter called “the Bidder”) of the other part:

 

WHEREAS the Procuring Agency invited Bids for provision of goods, viz., Annual Tender 2026-27 for Dental Material and Instruments/OT Medicines/Lab Equipment/Miscellaneous Hospital Items and Queue Management System (P108739) and has accepted a Bids by the Bidder for the provision of Goods in the sum of [contract price in words and figures] (hereinafter called “the Contract Price”).

 

NOW THIS CONTRACT WITNESSETH AS FOLLOWS:

 

1.   In this Contract words and expressions shall have the same meanings as are respectively assigned to them in the Conditions of Contract referred to.

2.   The following documents shall be deemed to form and be read and construed as part of this Contract, In the event of any ambiguity or conflict between the Contract Documents listed below, the order of precedence shall be the order in which the Contract Documents are listed below:-

  1. This form of Contract;
  2. the Form of Bids and the Price Schedule submitted by the Bidder;
  3. the Schedule of Requirements;
  4. the Technical Specifications;
  5. the Special Conditions of Contract;
  6. the General Conditions of the Contract;
  7. the Procuring Agency’s Letter of Acceptance; and
  8. [add here: any other documents]

3.   In consideration of the payments to be made by the Procuring Agency to the Bidder as hereinafter mentioned, the Bidder hereby covenants with the Procuring Agency to provide the Goods related services and to remedy defects therein in conformity in all respects with the provisions of the Contract.

4.   The Procuring Agency hereby covenants to pay the Bidder in consideration of the provision of Goods and the remedying of defects therein, the Contract Price or such other sum as may become payable under the provisions of the contract at the times and in the manner prescribed by the contract.

 

IN WITNESS whereof the parties hereto have caused this Contract to be executed in accordance with their respective laws the day and year first above written.

 

Signed, sealed, delivered by __________________the ________________ (for the Procuring Agency)

 

Witness to the signatures of the Procuring Agency:

………………………………………………

Signed, sealed, delivered by __________________the ________________ (for the Procuring Agency)

 

Witness to the signatures of the Bidder: …………………………………………………

 

 

📑 Integrity Pact (INP)

Annual Tender 2026-27 for Dental Material and Instruments/OT Medicines/Lab Equipment/Miscellaneous Hospital Items and Queue Management System

Published on: Friday, September 11, 2026 12:27 PM

Ref# : P108739
QR Code

Integrity Pact

DECLARATION OF FEES, COMMISSION AND BROKERAGE ETC. PAYABLE BYTHE SUPPLIERS OF GOODS, SERVICES & WORKS IN  CONTRACTS WORTH RS.10.00 MILLION OR MORE

 

Contract                           Number:  Contract                               Value:  Contract Title:

Dated:

 

[Name of Supplier] hereby declares that it has not obtained or induced the procurement of any contract, right, interest, privilege or other obligation or benefit from Government of Pakistan or any administrative subdivision or agency thereof or any other entity owned or controlled by it (GoP) through any corrupt business practice.

Without limiting the generality of the foregoing [Name of Supplier] represents and warrants that it has fully declared the brokerage, commission, fee etc. paid  or payable to anyone and not given or agreed to give and shall not give or agree to give to anyone within or outside Pakistan either directly or indirectly through any natural or juridical person, including its affiliate, agent, associate, broker, consultant, director, promoter, shareholder, sponsor or subsidiary, any commission, gratification, bribe, finder's fee or kickback, whether described as consultations fee or otherwise, with the object of obtaining or inducing the procurement of a contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP, except that which has been expressly declared pursuant hereto.

[Name of Supplier] certifies that it has made and will make full disclosure of all agreements and arrangements with all persons in respect of or related to the transaction with GoP and has not taken any action or will not take any action to circumvent the above declaration, representative or warranty.

[Name of Supplier] accepts full responsibility and strict liability for making and false declaration, not making full disclosure, misrepresenting fact or taking any action likely to defeat the purpose of this declaration, representation and warranty. It agrees that any contract, right interest, privilege or other obligation or benefit obtained or procured as aforesaid shall, without prejudice to any other right and remedies available to GoP under any law, contract or other instrument, be voidable at the option of GoP.

Notwithstanding any rights and remedies exercised by GoP in this regard, [Name of Supplier] agrees to indemnify GoP for any loss or damage incurred by it on account of its corrupt business practices and further pay compensation to GoP in an amount equivalent to ten time the sum of any commission, gratification, bribe, finder's fee or kickback given by [Name of Supplier] as aforesaid for the purpose of obtaining or inducing the procurement of any contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP.

📑 Performance Guarantee Form (PGF)

Annual Tender 2026-27 for Dental Material and Instruments/OT Medicines/Lab Equipment/Miscellaneous Hospital Items and Queue Management System

Published on: Friday, September 11, 2026 12:27 PM

Ref# : P108739
QR Code

Performance Guarantee Form

 

To:     SZABMU, School of Dentistry (Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad), Purchase Officer Room # 27, Ground Floor, SOD SZABMU, Ravi Road, Sector G-8/3., Islamabad Capital Territory

 

WHEREAS [name of Bidder] (hereinafter called “the Bidder”) has undertaken, in pursuance of Contract No.  [reference number of the contract] dated [insert date] for provision of Goods(hereinafter called “the Contract”).

 

AND WHEREAS it has been stipulated by you in the said Contract that the Bidder shall furnish you with a Bank Guarantee by a reputable bank for the sum specified therein as security for compliance with the Bidder’s performance obligations in accordance with the Contract.

 

AND WHEREAS we have agreed to give the Bidders guarantee:

 

THEREFORE, WE hereby affirm that we are Guarantors and responsible to you, on behalf of the Bidder, up to a total of [amount of the guarantee in words and figures], and we undertake to pay you, upon your first written demand declaring the Bidder to be in default under the Contract and without cavil or argument, any sum or sums within the limits of [amount of guar­antee] as aforesaid, without your needing to prove or to show grounds or reasons for your demand or the sum specified therein.

 

This guarantee is valid until the: [insert date]

 

 

Signature and seal of the Guarantors

 

 

_____________________________________________________________________

[name of bank or financial institution]

 

 

_____________________________________________________________________

[address]

 

 

_____________________________________________________________________

[date}

📑 Annexure (ANX)

Annual Tender 2026-27 for Dental Material and Instruments/OT Medicines/Lab Equipment/Miscellaneous Hospital Items and Queue Management System

Published on: Friday, September 11, 2026 12:27 PM

Ref# : P108739
QR Code
No Annexure Defined.

📑 Procurement Forms (PFD)

Annual Tender 2026-27 for Dental Material and Instruments/OT Medicines/Lab Equipment/Miscellaneous Hospital Items and Queue Management System

Published on: Friday, September 11, 2026 12:27 PM

Ref# : P108739
QR Code