In terms of Rules 65 of Public Procurement Rules, 2026 Grievance Redressal Committee (GRC) is notified for the subject procurement and notification copy is available on the procuring agency’s website and also available on EPADS v2.0 as well as Authority’s website at (www.ppra.gov.pk).
National Faceless Centre (NFC) (National Faceless Centre), Admin Officer
NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory
+92-333-514-9401
procurementnfc.fbr@gmail.com
The following specific data for the procurement of Goods to be procured shall complement, supplement, or amend the provisions in the Instructions to Bidders (ITB). Whenever there is a conflict, the provisions herein shall prevail over those in ITB.
BDS Clause Number
ITB Number
Amendments of, and Supplements to, Clauses in the Instruction to Bidders
BDS Clause Number 1
ITB Number 1.1
Name of Procuring Agency: National Faceless Centre (NFC) (National Faceless Centre)
The subject of procurement is: Procurement of Interior Finishing Works: Wall Panelling, Linear LED Lighting, Built-in Shelving and Window Blinds
Expected commencement date: Monday, December 7, 2026
BDS Clause Number 2
ITB Number 2.1
Financial year for the operations of the Procuring Agency: 2026-27
Name and identification number of the Contract: P178752
BDS Clause Number 3
ITB Number 4.6
JV/Consortium or Association Allowed: No
Number of JV/Consortium Members: Nil
BDS Clause Number 4
ITB Number 7.1
The Bidders may seek clarifications through EPADS v2.0: Clarification Date: Friday, November 13, 2026
Pre-Bid Meeting: Tuesday, November 10, 2026 11:00 AM
Venue: NFC Building, Service Road, Mauve Area, G-9/1
BDS Clause Number 5
ITB Number 8.1
Any addendum, in case issued, shall be published on National Faceless Centre (NFC) (National Faceless Centre) website and on EPADS v2.0.
BDS Clause Number 6
ITB Number9.1
List of documents required along with the bid: No
BDS Clause Number 7
ITB Number 11.1
The qualification criteria to establish the supply / production capability of the bidder.
see Eligibility Criteria
BDS Clause Number 8
ITB Number 7.6
Services and Their related documents:
See section Required Services and Scope of Work
BDS Clause Number 9
ITB Number 13.1 & 13.2
Price schedule will be provided according to the format defined and acquired.
see section price schedule.
BDS Clause Number 10
ITB Number 7.6.2
Specifications:
see section of specifications.
BDS Clause Number 11
ITB Number 13.5
The price shall be Fixed.
BDS Clause Number 12
ITB Number 15.1
Currency of the Bids shall be : PKR
BDS Clause Number 13
ITB Number 16.1
The Bids/Bid Validity period shall be: 90 Days
BDS Clause Number 14
ITB Number 17.1
The amount of Bid Security shall be as defined in Bid Security Section for items and lots given in BDS 6
Instrument of Bid Security Shall be in the Name of : Director General, NFC
The Bid Security shall be in the form of: Pay Order, Bank Guarantee, Demand Draft
BDS Clause Number 15
ITB Number 17.3
The Bids security shall be valid for twenty-eight (28) days beyond the expiry of the Bids validity period specified in the bidding documents, for example the bid validity is 180 days so the bid security shall be valid for 180+28 = 208 days.
BDS Clause Number 16
ITB Number 18.1
Alternative Bids to the requirements of the bidding documents will not be permitted.
BDS Clause Number 17
ITB Number 21.1
Bid shall be submitted online on EPADS v2.0 whereas hard copy of the bid security should be submitted to the following;
NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory
Bids that are not submitted on EPADS v2.0 shall be disqualified.
The deadline for Bids submission is: Monday, November 16, 2026 11:00 AM
BDS Clause Number 18
ITB Number 26.1
The Bids opening shall take place on EPADS v2.0.
Day : Monday
Date: Monday, November 16, 2026
Time : 11:30 AM
BDS Clause Number 19
ITB Number 32.1
Selection technique adopted will be: Least Cost Based Selection (LCBS)
see Evaluation Criteria
BDS Clause Number 20
ITB Number 49.1
The Performance guarantee shall: 5.00%.
The Performance Guarantee shall be acceptable in the form of: Pay Order, Bank Guarantee
BDS Clause Number 21
ITB Number 51.1
Arbitrator shall be appointed by mutual consent of the both parties.
BDS Clause Number 22
ITB Number 53.1
Grievence against this procurement shall be submitted online on EPADS v2.0.
All Active Taxpayers shall be eligible to participate in the procurement process, unless expressly excluded or otherwise restricted under the Eligibility Criteria specified by the Procuring Agency.
| Required Registration |
|---|
|
NADRA CITIZENSHIP (CNIC/NICOP) |
| Eligibility Criteria | Document |
|---|---|
| Income tax: NTN and on the Active Taxpayers List NTN certificate and ATL status | Yes |
| Sales tax registration and active status Registration certificate and ATL status | Yes |
| At least two similar works completed in the last three years (interior wall panelling or similar joinery), each of Rs. 1000,000 or more Form 4, with work orders or completion certificates | Yes |
| Not blacklisted or debarred, not insolvent (Rule 21) Affidavit (Form 3) | Yes |
| Bid securing declaration Form 2 | Yes |
| Integrity Pact signed | Yes |
| Average annual turnover of at least Rs. 5 million over the last three years Income tax returns or audited accounts | Yes |
| Site visit made: site visit certificate (Form 7) and Samples delivered before the deadline. | Yes |
| Procurement Cell receipt against Form 8. | Yes |
Least Cost Based Selection (LCBS)
Weightage
| Technical Evaluation % |
|---|
| 100 |
| Technical Marks | 100 | |
|---|---|---|
| Passing Marks | 60 | |
| Technical Evaluation Criteria | ||
| Experience. Similar works (interior wall paneling or similar joinery) completed in the last three years, each of Rs. 1,000,000 or more, with work order or completion certificate (Form 4): 2 works, 15 marks; 3 works, 20; 4 works, 25; 5 or more, 30. (Qualitative)(Doc Required) | 30 | |
| Financial capacity. Average annual turnover over the last three years, from income tax returns or audited accounts: Rs. 5 million to below Rs. 10 million, 8 marks; Rs. 10 million to below Rs. 20 million, 12; Rs. 20 million or more, 15. (Qualitative)(Doc Required) Rs. 20 million or more (15) Rs. 10 million to below Rs. 20 millionRs. 10 million to below Rs. 20 million (12) : Rs. 5 million to below Rs. 10 million (8) | 15 | |
| Samples (Form 8), each marked as in paragraph 3 below: (a) wall panel with groove and inlay strip, 10 marks; (b) lit LED profile with diffuser, with the data sheet of the strip, 7; (c) veneer in the finished walnut tone, 5 ; (d) blind slat with brochure, 3. e) decorative items 6 to 15 of the Bill of Quantities, Form 8 Nos. 5 to 14, 1 mark each, 10 (Qualitative)(Doc Required) | 35 | |
| Photographs of completed works. Interior works with wall paneling or built-in joinery: 5 marks for each project, up to 2 projects. Each project needs at least 3 clear photographs with the client's name, address and year of completion. (Qualitative)(Doc Required) | 10 | |
| Client letters. Letters of satisfaction, or completion certificates stating that the work was satisfactory, on the client's letterhead, for similar works in the last three years: 5 marks for each, up to 2. (Qualitative)(Doc Required) | 10 | |
Lot Title : Interior Finishing Works: Wall Panelling, Linear LED Lighting, Built-in Shelving and Window Blinds
Bid Security : 100000 PKR
| Position | Delivery Schedule | Quantity |
|---|---|---|
| Wall panelling with grooves and inlay strips, complete | Address: NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory Schedule: 30 DaysQuantity: 1460/sqft |
1460/sqft |
| Recessed linear LED lighting in aluminium profile, with drivers, wiring and switching, | Address: NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory Schedule: 30 daysQuantity: 270/ft |
270/ft |
| Built-in open shelving with concealed lighting, | Address: NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory Schedule: 30 DaysQuantity: 150/ft |
150/ft |
| Horizontal venetian blinds, | Address: NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory Schedule: 30 DaysQuantity: 275/sqft |
275/sqft |
| Wooden door Polishing | Address: NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory Schedule: 30 DaysQuantity: 3/Qty |
3/Qty |
| Large artificial floor plants, 5 to 6 ft high, in a mix of palm, ficus and leafy varieties as in the design; realistic, UV resistant and colour fast foliage; each in a planter (brushed steel for the waiting area, matt white or grey elsewhere), weight | Address: NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory Schedule: As Per RequirementQuantity: 14/Qty |
14/Qty |
| Small artificial table plants (boxwood or grass type), about 8 to 10 inch, in square matt black or charcoal planters, for the boardroom table | Address: NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory Schedule: As Per RequirementQuantity: 3/Qty |
3/Qty |
| Artificial white flower arrangements in small white ceramic vases, for side tables and desks | Address: NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory Schedule: As Per RequirementQuantity: 6/Qty |
6/Qty |
| Rug, 8 ft x 10 ft, machine made, short pile, in ivory or beige with a soft abstract pattern as in the design; anti-slip backing and bound edges | Address: NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory Schedule: As Per RequirementQuantity: 2/Qty |
2/Qty |
| Rug, 5 ft x 8 ft | Address: NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory Schedule: As Per RequirementQuantity: 2/Qty |
2/Qty |
| Framed abstract art print, about 24 x 36 inch, in earth tones (beige, brown and black) as in the design; high quality print on canvas or art paper; slim black frame with white mount and glazing; hanging fixtures included | Address: NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory Schedule: As Per RequirementQuantity: 5/Qty |
5/Qty |
| Framed abstract art print, about 48 x 30 inch (landscape), as in item 6, for the waiting area | Address: NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory Schedule: As Per RequirementQuantity: 1/Qty |
1/Qty |
| Arc floor lamp, about 2 m high, brushed steel or chrome arm, metal dome shade of about 40 cm, heavy weighted base, warm white LED lamp and foot or cord switch | Address: NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory Schedule: As Per RequirementQuantity: 1/Qty |
1/Qty |
| Decorative set for the open shelves: vases, bowls, sculptural pieces and books in white, black and earth tones, about 15 pieces | Address: NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory Schedule: As Per RequirementQuantity: 1/set |
1/set |
| Executive desk set: leather desk pad, pen holder, document tray and table stand with national flag | Address: NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory Schedule: As Per RequirementQuantity: 1/set |
1/set |
No
Lot Title : Interior Finishing Works: Wall Panelling, Linear LED Lighting, Built-in Shelving and Window Blinds
Position: Wall panelling with grooves and inlay strips, complete
Specifications / Requirements:
Wall panelling. Moisture resistant MDF board not less than 12 mm thick, with a matt factory finish in ivory or beige (PU paint or laminate) as in the approved design; fixed with concealed fixings on a frame of treated, seasoned timber or aluminium battens at not more than 2 ft centres. Horizontal reveal grooves with black aluminium inlay strips at dado and frieze levels and at panel joints, as in the design. Matching skirting, neat cut-outs for switches, sockets and AC lines, and access panels where needed. Measured on the finished face area; openings larger than 4 sq ft deducted.Position: Recessed linear LED lighting in aluminium profile, with drivers, wiring and switching,
Specifications / Requirements:
Recessed linear LED lighting. Aluminium recessed profile with opal diffuser, flush with the panel face, in the vertical grooves shown in the design. LED strip of at least 120 LEDs per metre, 24 V, colour rendering index of at least 80, colour temperature between 3000 K and 4000 K as approved on sample. Constant voltage drivers of adequate rating, with at least 2 years' warranty, placed where they can be reached for service. All wiring in conduit from the nearest distribution point, with earthing and separate switching for each room. Measured by running length of lit profile; drivers, wiring and switches included in the rate.Position: Built-in open shelving with concealed lighting,
Specifications / Requirements:
Built-in open shelving. 18 mm MDF or plywood carcass and shelves, faced with natural oak veneer in a deep walnut tone to match the approved sample and finished in matt PU lacquer, with a veneered back panel, shelves at about 12 inch spacing as in the design, and a concealed LED strip under each shelf with driver and switch. Measured on the front elevation area.Position: Horizontal venetian blinds,
Specifications / Requirements:
Window blinds. Horizontal venetian blinds with 50 mm aluminium slats in off-white, with tilt and lift controls, head rail and fixings. Measured on the finished blind size.Position: Wooden door Polishing
Specifications / Requirements:
Wooden Door Polishing of 3 doors 70 Sq FT per Door ApproximatleyPosition: Large artificial floor plants, 5 to 6 ft high, in a mix of palm, ficus and leafy varieties as in the design; realistic, UV resistant and colour fast foliage; each in a planter (brushed steel for the waiting area, matt white or grey elsewhere), weight
Specifications / Requirements:
Supply and installation of large artificial floor plants, 5 to 6 feet in overall height, comprising a mix of palm, ficus and other leafy varieties, as per approved design and placement requirements. Plants shall have realistic, high-quality foliage with UV-resistant, colour-fast and durable materials. Each plant shall be supplied in a suitable planter, comprising brushed stainless steel planters for the waiting area and matt white or grey planters for other designated areas. Planters shall be adequately weighted and stable, with decorative top dressing (artificial soil, stones or equivalent). Complete supply shall include all necessary materials, placement and finishing.Position: Small artificial table plants (boxwood or grass type), about 8 to 10 inch, in square matt black or charcoal planters, for the boardroom table
Specifications / Requirements:
Supply of small artificial table plants (boxwood or ornamental grass type), approximately 8–10 inches in height, with realistic, durable, colour-fast foliage, each fitted in a square matt black or charcoal-coloured planter. Planters shall be stable, neatly finished and suitable for placement on boardroom tables.Position: Artificial white flower arrangements in small white ceramic vases, for side tables and desks
Specifications / Requirements:
Supply of artificial white flower arrangements comprising realistic, high-quality, colour-fast and durable artificial white flowers with suitable green foliage, neatly arranged in small white ceramic vases. Each arrangement shall be aesthetically finished, stable and suitable for placement on side tables and office desksPosition: Rug, 8 ft x 10 ft, machine made, short pile, in ivory or beige with a soft abstract pattern as in the design; anti-slip backing and bound edges
Specifications / Requirements:
Supply of machine-made area rug, measuring 8 ft × 10 ft, with short pile construction in ivory or beige colour, featuring a soft abstract pattern as per approved design. Rug shall have durable, easy-to-maintain material, anti-slip backing and neatly bound edges, suitable for indoor office use.Position: Rug, 5 ft x 8 ft
Specifications / Requirements:
Supply of machine-made area rug, measuring 5 ft × 8 ft, with short pile construction in ivory or beige colour, featuring a soft abstract pattern as per approved design. Rug shall be durable, easy to maintain, with anti-slip backing and neatly bound edges, suitable for indoor office use.Position: Framed abstract art print, about 24 x 36 inch, in earth tones (beige, brown and black) as in the design; high quality print on canvas or art paper; slim black frame with white mount and glazing; hanging fixtures included
Specifications / Requirements:
Supply of framed abstract art print, approximately 24 × 36 inches, in beige, brown and black earth tones, as per approved design. High-quality print on canvas or art paper, fitted with a slim black frame, white mount and protective glass or glazing. Complete with suitable wall-hanging fixtures, ready for installation.Position: Framed abstract art print, about 48 x 30 inch (landscape), as in item 6, for the waiting area
Specifications / Requirements:
Supply of framed abstract art print, approximately 48 × 30 inches (landscape orientation), matching the design, colour scheme, print quality, slim black frame, white mount and protective glazing specified for Item No. 6. Complete with suitable wall-hanging fixtures, suitable for the waiting area.Position: Arc floor lamp, about 2 m high, brushed steel or chrome arm, metal dome shade of about 40 cm, heavy weighted base, warm white LED lamp and foot or cord switch
Specifications / Requirements:
Supply of arc floor lamp, approximately 2 metres in height, featuring a brushed steel or chrome-finished metal arm, metal dome shade approximately 40 cm in diameter, heavy weighted base for stability, warm white LED light source and convenient foot or cord-operated switch. Complete with all necessary electrical fittings and accessories, suitable for indoor office use.Position: Decorative set for the open shelves: vases, bowls, sculptural pieces and books in white, black and earth tones, about 15 pieces
Specifications / Requirements:
Supply of a decorative accessories set comprising approximately 15 assorted pieces, including decorative vases, bowls, sculptural objects and decorative books for open-shelf display. Items shall be in a coordinated colour scheme of white, black and earth tones, with varied shapes, sizes and finishes, as per approved interior design. All items shall be of good quality, neatly finished and suitable for indoor office decoration.Position: Executive desk set: leather desk pad, pen holder, document tray and table stand with national flag
Specifications / Requirements:
Supply of executive desk set comprising a premium-quality leather or leatherette desk pad, pen holder, document tray and tabletop flag stand with Pakistan's national flag. All components shall have a coordinated executive finish, durable construction and neat workmanship, suitable for official office use.The works are in the NFC office and shall follow its approved interior design, which is available for inspection at the Procurement Cell. They comprise wall panelling with grooves and recessed linear LED lights, built-in open shelving with lighting, and venetian blinds on the windows. Furniture, the timber partition screen, rugs, artwork, plants and signage are not part of this tender.
1.Wall panelling. Moisture resistant MDF board not less than 12 mm thick, with a matt factory finish in ivory or beige (PU paint or laminate) as in the approved design; fixed with concealed fixings on a frame of treated, seasoned timber or aluminium battens at not more than 2 ft centres. Horizontal reveal grooves with black aluminium inlay strips at dado and frieze levels and at panel joints, as in the design. Matching skirting, neat cut-outs for switches, sockets and AC lines, and access panels where needed. Measured on the finished face area; openings larger than 4 sq ft deducted.
2.Recessed linear LED lighting. Aluminium recessed profile with opal diffuser, flush with the panel face, in the vertical grooves shown in the design. LED strip of at least 120 LEDs per metre, 24 V, colour rendering index of at least 80, colour temperature between 3000 K and 4000 K as approved on sample. Constant voltage drivers of adequate rating, with at least 2 years' warranty, placed where they can be reached for service. All wiring in conduit from the nearest distribution point, with earthing and separate switching for each room. Measured by running length of lit profile; drivers, wiring and switches included in the rate.
3.Built-in open shelving. 18 mm MDF or plywood carcass and shelves, faced with natural oak veneer in a deep walnut tone to match the approved sample and finished in matt PU lacquer, with a veneered back panel, shelves at about 12 inch spacing as in the design, and a concealed LED strip under each shelf with driver and switch. Measured on the front elevation area.
4.Window blinds. Horizontal venetian blinds with 50 mm aluminium slats in off-white, with tilt and lift controls, head rail and fixings. Measured on the finished blind size.
5.Samples. Within 5 days of the work order, the contractor shall submit for approval: a panel sample with groove and inlay strip; a lit sample of the LED profile; a veneer sample in the finished tone; and a sample of the blind slat. Work shall proceed only to approved samples.
Â
Delivery and inspection:
Delivery and placement within 10 days of the purchase order, at hours agreed with the NFC, without damage to walls, panelling or floors. The items will be checked and accepted by the NFC inspection committee.
Warranty:
One year against fading, shedding, fraying and manufacturing defects for plants and rugs, and against defects for the floor lamp. Defective items shall be replaced within 7 days of notice
For Individual Positions
| # | Position Title | Quantity | Unit Price (PKR) | Total Price (PKR) | Delivery Location | Delivery Period / Year | Country of Origin |
|---|---|---|---|---|---|---|---|
| 1 | |||||||
| 2 |
| # | Lot Title | Total Lot Price (PKR) | Country of Origin |
|---|---|---|---|
| 1 | [Lot 1 Title] |
The following Special Conditions of Contract shall supplement the General Conditions of Contract. Whenever there is a conflict, the provisions herein shall prevail over those in the Conditions of Contract. The corresponding clause number of the GCC is indicated in parentheses.
Number of GC Clause
Amendments of, and Supplements to, Clauses in the General Conditions of Contract
Definitions
The Procuring Agency is: National Faceless Centre (NFC) (National Faceless Centre), Admin Officer NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory
Contractor is:
The title of the subject procurement is:Procurement of Interior Finishing Works: Wall Panelling, Linear LED Lighting, Built-in Shelving and Window Blinds
Number of GC Clause 2
Applicable/Governing Law:
The Contract shall be interpreted in accordance with the laws of Islamic Republic of Pakistan
Number of GC Clause 3
Language:
The language of the Contract, all correspondence and communications to be given, and all other documentation to be prepared and supplied under the Contract shall be in English.
Number of GC Clause 4
Notices:
The addresses for the notices are:
Procuring Agency:
National Faceless Centre (NFC) (National Faceless Centre), Admin Officer
NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory
+92-333-514-9401
procurementnfc.fbr@gmail.com
Contractor/ Bidder:
[Name, address and telephone number].
The Contractor/ Bidder’s Representative(s)
[Name, address, telephone number and e-mail address]
Number of GC Clause 6.1
The Authorized Representatives are:
For the Procuring Agency:
National Faceless Centre (NFC) (National Faceless Centre), Admin Officer
NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory
+92-333-514-9401
procurementnfc.fbr@gmail.com
For the Bidder:
Name: ………………………
Designation: ……………..
Address: ……………………………..
Number of GC Clause 7
Effectiveness of the contract
The Contractor/Bidder shall be effective within ….. days from the date of signature of the Contract by both parties
Number of GC Clause 8
Commencement of Contract:
The Contractor/ Bidder shall provide Non-Consultancy Services from the effective date of contract.
Number of GC Clause 10.2
Expiration of Contract:
The time period shall be ………………….
Number of GC Clause 14
Termination
In the event of termination of the contract due to any reason as already defined in the General Conditions of Contract, the Bidder shall be responsible for providing to the Authority the Goods till the time of alternate arrangements.
Number of GC Clause 16
Conflict of Interest:
The Procuring Agency reserves the right to determine on a case-by-case basis whether the Bidder should be disqualified from providing goods or services due to a conflict of a nature described in Clause GCC 16.
Number of GC Clause 20
Liquidated Damages
If the Bidder fails to provide services as required under the contract or in case of any data loss/data breach or any incident compromising the data security or other such failures related to any services, the Bidder shall pay to the Procuring Agency as Liquidated Damages at a rate of 0.50% to 10.00% of the Contract value, in accordance with the extent of performance failure & the cost of investigating such incidents as judged by the Authority.
Number of GC Clause 21
Performance Guarantee:
Instrument of Performance Guarantee shall be in the Name of : Director General, NFC
The amount of performance guarantee shall be 5.00% of the contract price in acceptable form of Pay Order, Bank Guarantee
Number of GC Clause 27
Currency of Payment:
All the payment to be released to the contractor/Bidder shall be in Pakistani Rupees.
Number of GC Clause 28
Payment terms:
Payment will be made to the Bidder against the procured Goods and services according to the actual invoice or running bills submitted by the Bidder against the services provided within the time given in the conditions of the contract.
Number of GC Clause 29
Identifying Defects:
The Authority reserves the right at any time to inspect the premises of the provider to inspect the goods and monitor the goods being provided.
The contract comes into force on signature by both parties (Rule 55(b)). The General Conditions of Contract of the PPRA standard bidding document, as generated on EPADS, apply, read with these Special Conditions; where they differ, these Special Conditions prevail.
The NFC will designate a contract manager (Rule 58). No work shall start before the contract is signed or a notice to commence is issued (Rule 58(4)).
All works shall be completed within 45 days of the work order. For delay attributable to the contractor, liquidated damages of 0.5% of the contract price per day apply, up to 10%, after which the NFC may terminate the contract and get the work done at the contractor's risk and cost.
Work will be done during hours agreed with the NFC, by staff carrying identity cards. The contractor shall protect existing floors, ceilings, furniture and equipment, make good any damage at its own cost, keep the site clean and remove debris daily. Electrical work shall be done by a qualified electrician.
Quantities will be measured jointly and recorded. The works will be inspected by the NFC inspection committee before taking over, and the taking over certificate will be issued on EPADS within 30 days of completion (Rule 62(1)).
The contractor shall make good any defect in materials or workmanship, including LED strips and drivers, within 7 days of notice during the 12 month defect liability period. The defect liability certificate will be issued on EPADS within 30 days of the end of the period (Rule 62(2)), and the performance guarantee will then be released.
5% of the contract price, as a bank guarantee (Form 5) or pay order from a scheduled bank, within 10 days of the letter of award, valid until 30 days after the end of the defect liability period (Rule 51).
Disputes will first be settled amicably and failing that by arbitration under the laws of Pakistan (Rule 66). The arbitrator will be appointed by the Director General, NFC.
Supply and placement of decorative items: artificial plants, rugs, art prints and accessories:. The vendor shalll attach photographs or catalogue pages of the items offered, with sizes and materials, signed and stamped.
Sample pertaining specifically to Supply and placement of decorative items: artificial plants, rugs, art prints and accessories: The vendor shall supply samples of all decorative items for evaluation and marking as given in technical eligibility.
Delivery pertaining specifically to Supply and placement of decorative items: artificial plants, rugs, art prints and accessoriesDelivery and placement within 10 days of the purchase order, at hours agreed with the NFC, without damage to walls, panelling or floors. The items will be checked and accepted by the NFC inspection committee.
Warranty pertaining specifically to Supply and placement of decorative items: artificial plants, rugs, art prints and accessories: One year against fading, shedding, fraying and manufacturing defects for plants and rugs, and against defects for the floor lamp. Defective items shall be replaced within 7 days of notice.
Sample Pertaining to work to be carried out: The samples submitted with the successful bid will be the reference for the works. Within 5 days of the work order, the contractor shall submit any sample the NFC asks to be adjusted (for example, the veneer tone or the colour temperature of the LED light). Work shall proceed only to approved samples.
The contract shall be effective on the date of its signature by both parties
The contract shall end on the issue of the defect liability certificate: completion within 45 days of the work order and a defect liability period of 12 months
0.5% of the contract price per day of delay, up to 10% of the contract price
Within 30 days of a correct invoice submitted after the taking over certificate (Rule 54). No advance. Income tax and sales tax will be withheld as required by law
Details are mentioned in Annex
Number of GC Clause 31
Following is the guidance for Dispute Resolution
Notwithstanding any reference to the arbitration herein, the parties shall continue to perform their respective obligations under the Contract unless they otherwise agree that the Authority shall pay the Bidder any monies due to the Bidder.
Arbitrator’s fee:
The fee shall be specified in Pak Rupees, as determined by the Arbitrator, which shall be shared equally by both parties.
Appointing Authority for Arbitrator:
By the Mutual Consent or in accordance with the provisions of Arbitration Act, 1940, in case the parties fail to reach a consensus on the name of sole arbitrator, any party may submit an application to the Chief Justice Islamabad High Court for appointment of sole arbitrator. The Chief Justice IHC may appoint a former judge of any High Court or Supreme Court as the sole arbitrator to resolve the dispute between the parties.
Rules of procedure for arbitration proceedings:
Any dispute between the Authority and a Bidder who is a national of the Islamic Republic of Pakistan arising in connection with the present Contract shall be referred to adjudication or arbitration in accordance with the laws of the Islamic Republic of Pakistan including Arbitration Act 1940, however above provision shall prevail in referring the case to the Arbitrator.
Place of Arbitration and Award:
The arbitration shall be conducted in English language and place of arbitration shall be at Islamabad. The award of the arbitrator shall be final and shall be binding on the parties.
Date: [insert date (as day, month and year)]
Bid No.:P178752
To: National Faceless Centre (NFC) (National Faceless Centre), Admin Officer NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory
We, the undersigned, declare that:
We understand that, according to your conditions, Bids must be supported by a Bid Securing Declaration.
We accept that we will be blacklisted and henceforth cross debarred for participating in respective category of public procurement proceedings for a period of (not more than) six months, if fail to abide with a bid securing declaration, however without indulging in corrupt and fraudulent practices, if we are in breach of our obligation(s) under the Bid conditions, because we:
We understand this Bid Securing Declaration shall expire if we are not the successful
Bidder, upon the earlier of (i) our receipt of your notification to us of the name of the successful Bidder; or (ii) twenty-eight (28) days after the expiration of our Bid.
THIS AGREEMENT made the _____ day of __________ 20_____ between National Faceless Centre (NFC) (National Faceless Centre), Admin Officer NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory
(hereinafter called “the Procuring Agency”) of the one part and [name of Bidder] of [city and country of Bidder] (hereinafter called “the Bidder”) of the other part:
WHEREAS the Procuring Agency invited Bids for provision of goods, viz., Procurement of Interior Finishing Works: Wall Panelling, Linear LED Lighting, Built-in Shelving and Window Blinds (P178752) and has accepted a Bids by the Bidder for the provision of Services in the sum of [contract price in words and figures] (hereinafter called “the Contract Price”).
NOW THIS CONTRACT WITNESSETH AS FOLLOWS:
1. In this Contract words and expressions shall have the same meanings as are respectively assigned to them in the Conditions of Contract referred to.
2. The following documents shall be deemed to form and be read and construed as part of this Contract, In the event of any ambiguity or conflict between the Contract Documents listed below, the order of precedence shall be the order in which the Contract Documents are listed below:-
3. In consideration of the payments to be made by the Procuring Agency to the Bidder as hereinafter mentioned, the Bidder hereby covenants with the Procuring Agency to provide the Goods related services and to remedy defects therein in conformity in all respects with the provisions of the Contract.
4. The Procuring Agency hereby covenants to pay the Bidder in consideration of the provision of Goods and the remedying of defects therein, the Contract Price or such other sum as may become payable under the provisions of the contract at the times and in the manner prescribed by the contract.
IN WITNESS whereof the parties hereto have caused this Contract to be executed in accordance with their respective laws the day and year first above written.
Signed, sealed, delivered by __________________the ________________ (for the Procuring Agency)
Witness to the signatures of the Procuring Agency:
………………………………………………
Signed, sealed, delivered by __________________the ________________ (for the Procuring Agency)
Witness to the signatures of the Bidder: …………………………………………………
Contract Number: Contract Value: Contract Title:
Dated:
[Name of Supplier] hereby declares that it has not obtained or induced the procurement of any contract, right, interest, privilege or other obligation or benefit from Government of Pakistan or any administrative subdivision or agency thereof or any other entity owned or controlled by it (GoP) through any corrupt business practice.
Without limiting the generality of the foregoing [Name of Supplier] represents and warrants that it has fully declared the brokerage, commission, fee etc. paid or payable to anyone and not given or agreed to give and shall not give or agree to give to anyone within or outside Pakistan either directly or indirectly through any natural or juridical person, including its affiliate, agent, associate, broker, consultant, director, promoter, shareholder, sponsor or subsidiary, any commission, gratification, bribe, finder's fee or kickback, whether described as consultations fee or otherwise, with the object of obtaining or inducing the procurement of a contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP, except that which has been expressly declared pursuant hereto.
[Name of Supplier] certifies that it has made and will make full disclosure of all agreements and arrangements with all persons in respect of or related to the transaction with GoP and has not taken any action or will not take any action to circumvent the above declaration, representative or warranty.
[Name of Supplier] accepts full responsibility and strict liability for making and false declaration, not making full disclosure, misrepresenting fact or taking any action likely to defeat the purpose of this declaration, representation and warranty. It agrees that any contract, right interest, privilege or other obligation or benefit obtained or procured as aforesaid shall, without prejudice to any other right and remedies available to GoP under any law, contract or other instrument, be voidable at the option of GoP.
Notwithstanding any rights and remedies exercised by GoP in this regard, [Name of Supplier] agrees to indemnify GoP for any loss or damage incurred by it on account of its corrupt business practices and further pay compensation to GoP in an amount equivalent to ten time the sum of any commission, gratification, bribe, finder's fee or kickback given by [Name of Supplier] as aforesaid for the purpose of obtaining or inducing the procurement of any contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP.
To: National Faceless Centre (NFC) (National Faceless Centre), Admin Officer NFC Building, Service Road, Mauve Area, G-9/1, Islamabad Capital Territory
WHEREAS [name of Bidder] (hereinafter called “the Bidder”) has undertaken, in pursuance of Contract No. [reference number of the contract] dated [insert date] for provision of Non-Consultancy Services(hereinafter called “the Contract”).
AND WHEREAS it has been stipulated by you in the said Contract that the Bidder shall furnish you with a Bank Guarantee by a reputable bank for the sum specified therein as security for compliance with the Bidder’s performance obligations in accordance with the Contract.
AND WHEREAS we have agreed to give the Bidders guarantee:
THEREFORE, WE hereby affirm that we are Guarantors and responsible to you, on behalf of the Bidder, up to a total of [amount of the guarantee in words and figures], and we undertake to pay you, upon your first written demand declaring the Bidder to be in default under the Contract and without cavil or argument, any sum or sums within the limits of [amount of guarantee] as aforesaid, without your needing to prove or to show grounds or reasons for your demand or the sum specified therein.
This guarantee is valid until the: [insert date]
Signature and seal of the Guarantors
_____________________________________________________________________
[name of bank or financial institution]
_____________________________________________________________________
[address]
_____________________________________________________________________
[date}
Only Technical forms are to be submitted hereÂ