7. In terms of Rules 48 of Public Procurement Rules, 2004 Grievance Redressal Committee (GRC) is notified for the subject procurement and notification copy is available on the procuring agency’s website and also available on EPADS v2.0 as well as Authority’s website at (www.ppra.org.pk).
National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director
Park Road, Islamabad Capital Territory
+92-333-855-4884
purchaseprocurement58@gmail.com
The following specific data for the procurement of Non-Consultancy Services to be procured shall complement, supplement, or amend the provisions in the Instructions to Bidders (ITB). Whenever there is a conflict, the provisions herein shall prevail over those in ITB.
BDS Clause Number
ITB Number
Amendments of, and Supplements to, Clauses in the Instruction to Bidders
BDS Clause Number 1
Name of Procuring Agency: National Institutes of Health (NIH) (National Institutes of Health (NIH))
The subject of procurement is: Extension of Vaccine Filling and Supply Line Facility on Design and Build Model at Biological Production Division (BPD), National Institute of Health Islamabad.
Expected commencement date: Monday, November 16, 2026
BDS Clause Number 2
Financial year for the operations of the Procuring Agency: 2026-27
Name and identification number of the Contract: P106243
BDS Clause Number 3
JV/Consortium or Association Allowed: No
Number of JV/Consortium Members: Nil
BDS Clause Number 4
The Bidders may seek clarifications through EPADS v2.0: Clarification Date: Wednesday, September 30, 2026
Pre-Bid Meeting: Wednesday, September 30, 2026 11:30 AM
Venue: National Institute of Health, Park Road Islamabad
BDS Clause Number 5
Any addendum, in case issued, shall be published on National Institutes of Health (NIH) (National Institutes of Health (NIH)) website and on EPADS v2.0.
BDS Clause Number 6
List of documents required along with the bid:
BDS Clause Number 7
The qualification criteria to establish the supply / production capability of the bidder.
see Eligibility Criteria
BDS Clause Number 8
Services and Their related documents:
See section Required Services and Scope of Work
BDS Clause Number 9
Price schedule will be provided according to the format defined and acquired.
see section price schedule.
BDS Clause Number 10
Specifications:
see section of specifications.
BDS Clause Number 11
The price shall be Fixed.
BDS Clause Number 12
Currency of the Bids shall be : PKR
BDS Clause Number 13
The Bids/Bid Validity period shall be: 90 Days
BDS Clause Number 14
The amount of Bid Security shall be as defined in Bid Security Section for items and lots given in BDS 6
The Bid Security shall be in the form of: Pay Order, Call at Deposit, Bank Guarantee, Demand Draft
BDS Clause Number 15
The Bids security shall be valid for twenty-eight (28) days beyond the expiry of the Bids validity period specified in the bidding documents, for example the bid validity is 90 days so the bid security shall be valid for 90+28 = 118 days.
BDS Clause Number 16
Alternative Bids to the requirements of the bidding documents will not be permitted.
BDS Clause Number 17
Bid shall be submitted online on EPADS v2.0 whereas hard copy of the bid security should be submitted to the following;
Park Road, Islamabad Capital Territory
Bids that are not submitted on EPADS v2.0 shall be disqualified.
The deadline for Bids submission is: Thursday, October 15, 2026 11:00 AM
BDS Clause Number 18
The Bids opening shall take place on EPADS v2.0.
Day : Thursday
Date: Thursday, October 15, 2026
Time : 11:30 AM
BDS Clause Number 19
Selection technique adopted will be: Quality and Cost Based Selection (QCBS)
see Evaluation Criteria
BDS Clause Number 20
The Performance guarantee shall: 10.00%.
The Performance Guarantee shall be acceptable in the form of: Call at Deposit, Bank Guarantee, Demand Draft
21.
51.1
Arbitrator shall be appointed by mutual consent of the both parties.
BDS Clause Number 22
Grievence against this procurement shall be submitted online on EPADS v2.0.
All Active Taxpayers shall be eligible to participate in the procurement process, unless expressly excluded or otherwise restricted under the Eligibility Criteria specified by the Procuring Agency.
| Required Registration |
|---|
|
NADRA CITIZENSHIP (CNIC/NICOP) FBR (NTN) FBR (GSTN) PEC |
| Eligibility Criteria | Document |
|---|---|
| PEC valid license of Category C3 or above. | Yes |
| Power of attorney authorizing the signatory of the bid to act for and on behalf of the bidder. | Yes |
| Submit evidence of average annual turnover for the past three years. (200 Million) along with audit reports. | Yes |
| Furnish a technical proposal taking into account the various Appendices to Bid specially the following: Appendix-A to Bid Proposed Design and Construction Schedule Appendix-B to Bid Method of Performing the Work Appendix-C to Bid List of Major Equipment Appendix-D to Bid Organization Chart for Supervisory Staff and other pertinent information such as mobilization programmatic | Yes |
| Evidence of access to financial resources along with average annual Construction turnover | Yes |
| Latest status of financial resources commitment for last two years (Including the current year). | Yes |
| Complete company profile | Yes |
| Information about litigation presently in process | Yes |
| Any other documents required to be submitted in accordance with these bidding documents. | Yes |
| Details of similar work executed | Yes |
| Certificate of registration of bidder’s firm dully updated (Pakistan Engineering Council). | Yes |
| Relevant Experience: Proven experience in developing laboratories. | Yes |
| Technical Expertise: Expertise in ventilation/HVAC for labs, electrical, and plumbing systems, | Yes |
| List of Projects completed in the relevant field | Yes |
| Two (02) years warranty will be given by the vendor for every installed equipment and affidavit to be given for this with the technical bid. | Yes |
Quality and Cost Based Selection (QCBS)
Weightage
| Technical Evaluation % | Financial Evaluation % |
|---|---|
| 80 | 20 |
| Technical Marks | 100 | |
|---|---|---|
| Passing Marks | 80 | |
| Technical Evaluation Criteria | ||
| Documentary evidence of valid PEC certificate Min. C3 category registration in the field of construction of building and related works (Certificate to be attached) Mandatory codes BC01 BC02, CE09,CE10, EE02,EE03,EE04,EE07 ME01, ME02,ME06 (Qualitative)(Doc Required) | 30 | |
| Documentary evidence to be attached (including construction, renovation, remediation, repair and demolition) i) 1-5 years' experience (5 points) ii) 6-10 years' experience 10 points) iii) More than 10 years' experience (20 points) (Qualitative)(Doc Required) | 20 | |
| Documentary evidence especially of construction / renovation of laboratories/ OTs/ Clean room/HVAC to be attached. i) 1Project (5points) ii) 2 Projects (10 points) iii) More than 2 Projects (20 points) (Qualitative)(Doc Required) | 20 | |
| Bank statement of last three years; (Qualitative)(Doc Required) | 5 | |
| Audited Balance sheets of last 2 years by Chartered Accountant firms. (Qualitative)(Doc Required) | 20 | |
| Provide list of key technical personnel proposed to be employed on the project with CVs and signed statement on their availability for the project duration (Qualitative)(Doc Required) | 5 | |
Positions Without Lots :
| Position | Delivery Schedule | Quantity | Bid Security |
|---|---|---|---|
| Extension of Vaccine Filling and Supply Line Facility on Design and Build Model at Biological Production Division (BPD), National Institute of Health Islamabad. | Address: Park Road, Islamabad Capital Territory Schedule: 300 Days Quantity: 1/job |
1/job | 1500000 PKR |
No
Positions Without Lots :
Position: Extension of Vaccine Filling and Supply Line Facility on Design and Build Model at Biological Production Division (BPD), National Institute of Health Islamabad.
Specifications / Requirements:
| Sr | Detailed Item Description as per Clause 7 | Category | Unit | Qty |
|---|---|---|---|---|
| 1 | Construction Services (Lump Sum) | Design Services | Job | 1 |
| The bidder shall provide complete professional services for the design of the building extension works. Scope includes but is not limited to. | ||||
| • Detailed site survey and assessment of the existing HVAC system, ducting, HEPA filters, chiller system, and all installed utilities/equipment. | ||||
| • Architectural planning and layout design for the extension (new change rooms, buffer zones. airlocks, personnel/material exits, and associated areas) while ensuring seamless integration with the existing facility. | ||||
| • Detailed MEP (Mechanical. Electrical & Plumbing) design mainly focused on extension areas only with integration with the pre-existing structure and HVAC and other systems and equipment. | ||||
| • HVAC design for the new extension zones with appropriate clean room classification (Grade A, B, C & D), pressure cascades, airlocks, buffer zones, and personnel/material flow as per DRAP cGMP and WHO guidelines. | ||||
| •Equipment layout planning for vaccine filling operations in the extended area with required utilities. | ||||
| • Structural stability assessment of the extension (where required) | ||||
| • Waste management, drainage, and decontamination planning as per cGMP. | ||||
| • Preparation of detailed Bill of Quantities (BOQ), technical specifications. | ||||
| • Full compliance with DRAP regulations for sterile vaccine production. | ||||
| • The Contractor shall submit all drawings, calculations, and documents for approval by NIH/DRAP. | ||||
| 2 | HVAC Works for Extension/Upgradation (as per approved design): | AHU Additional (To be Integrated with the Previously installed AHU and Chiller Systems) | Job | 1 |
| Job: 1 Lot | ||||
| .Supply, installation, testing, and commissioning of HVAC extension / integration works for the new change rooms, buffer zones, airlocks, and exits. All new works shall integrate seamlessly with the existing HVAC system, ducting, HEPA filters, and chiller system. Works shall comply with DRAP standards. | ||||
| Key components | ||||
| • Extension and modification of existing ducting for supply return, fresh, and exhaust air to the new areas, including volume control dampers (VCDs), turning vanes, flexible connections, supports and proper sealing. | ||||
| • Supply and installation of additional H14 HEPA filters (99.995% efficiency © 0.3 um, sizes as per drawings) complete with filter boxes, gaskets, and leak-proof installation suitable for laminar flow and clean room applications. Each filter shall be factory-tested with test certificate. | ||||
| • Additional 3 kW, 3-phase Variable Frequency Drives (VFD) (Danfoss / Siemens / Dwyer or equivalent) for speed control of existing AHU blower motors serving the new zones (if required to achieve design CFM and pressure differentials). | ||||
| •UV-C disinfection lamps in the blower section of the integrated AHU (Philips or equivalent), if required for the new zones. | ||||
| • Closed-cell XLPE insulation (19 mm thick, Aero foam or equivalent) on new/extended ducts with canvas wrapping and anti-fungal coating. | ||||
| • Differential pressure monitoring gauges (Magnahelic, Dwyer or equivalent) for new zones. | ||||
| • Air balancing, leakage testing, and commissioning of the complete integrated HVAC system for the extension. | ||||
| Utilization of existing system: All existing AHUs, ducting, HEPA filters, VFDs, and associated devices shall be retained and fully utilized. New components shall only be provided where required for the extension as per approved drawings and DRAP requirements. | ||||
| Additional Instructions/Requirements: | ||||
| Scope of HVAC Work | ||||
| The contractor shall design, supply, install, test, commission, and hand over a complete hygienic air-conditioning system suitable for clean-room application. | ||||
| The HVAC system shall maintain the specified room environmental conditions and shall ensure that the air pressure inside the clean room is maintained higher than the surrounding areas. | ||||
| The revised HVAC requirements shall form part of this amended Scope of Work and shall supersede the corresponding HVAC requirements of the previous/old scope. | ||||
| The bidder should provide two (02) years Warranty for the whole system. | ||||
| Upgradation of Existing HVAC System | ||||
| The existing air-conditioning/HVAC system installed in the facility shall be upgraded as required for meeting the upgraded facility requirements keeping in view the DRAP requirements/recommendations. | ||||
| The contractor's scope shall include: | ||||
| • Dismantling and removal of the existing HVAC related auxiliaries/parts/material whichever is not compatible with the DRAP/cGMP requirements and replacements of these as per new approved design by the DRAP. | ||||
| • Safe transportation and disposal/handing over of removed equipment and materials to the Client. | ||||
| • Preparation, modification, and making good of existing walls, ceilings, floors, supports, openings, and other building elements affected by removal of the old HVAC system. | ||||
| • Design, supply, installation, testing, and commissioning of a the HVAC system for the whole facility, including all AHUs/indoor units, refrigeration systems, fans, ductwork, filters, dampers, controls, electrical panels, refrigerant piping, insulation, VFDs, sensors, and all associated accessories. | ||||
| • The upgraded system shall be properly integrated with the clean-room areas and shall maintain the required temperature, relative humidity, airflow, filtration, and positive pressure conditions specified in this Scope of Work. | ||||
| • All works required for complete replacement, including dismantling, shifting, installation, civil modifications, electrical works, controls, testing, balancing, commissioning, and final handover, shall be deemed included in the contractor's scope. | ||||
| • The contractor shall ensure that the completed HVAC installation provides a fully operational, hygienic, reliable, and compliant air-conditioning system for the entire facility. | ||||
| Air-Handling Unit / Indoor Unit Construction | ||||
| The air-conditioning indoor unit/AHU shall have, as a minimum, the following features: | ||||
| • Double-skin construction using 50 mm thick insulated panels. | ||||
| • Stainless-steel construction for internal/exposed components where required for hygienic applications. | ||||
| • Panels shall be properly insulated and sealed to prevent air leakage and minimize the risk of microbial growth. | ||||
| • Construction shall be suitable for clean-room/hygienic applications. | ||||
| • Internal surfaces shall be smooth and suitable for cleaning and sanitization. | ||||
| • Each section shall be provided with suitable inspection/access windows and access panels. | ||||
| • Access doors/panels shall be properly sealed with hygienic gaskets. | ||||
| Refrigeration System | ||||
| The air-conditioning system shall be equipped with: | ||||
| • The system shall be designed for reliable and continuous operation. | ||||
| • Adequate safety and protection controls shall be incorporated. | ||||
| Supply and Return Air System | ||||
| The HVAC system shall include complete supply and return air fan sections. | ||||
| The requirements shall include: | ||||
| • Fans manufactured from stainless steel or other suitable hygienic materials. | ||||
| • Variable Frequency Drive (VFD) units for fan speed control. | ||||
| • Variable fan speed to maintain the required airflow and clean-room pressure. | ||||
| • Appropriate supply and return air duct connections. | ||||
| • UV lamps within the air-handling system for hygienic/air-treatment purposes. | ||||
| • All necessary accessories for proper operation and balancing of the air distribution system. | ||||
| Air Filtration | ||||
| The air-handling unit shall be provided with appropriate air filtration comprising, as applicable: | ||||
| • Pre-filters. | ||||
| • Bag filters. | ||||
| • Filter housings and frames. | ||||
| • Accessible filter sections for inspection, maintenance, and replacement. | ||||
| The bag-filter section shall be provided with a differential pressure switch/transmitter. | ||||
| The differential pressure monitoring system shall provide an indication to the microprocessor controller when the filter becomes clogged or reaches the specified maintenance/replacement condition. | ||||
| Control System | ||||
| A complete electrical and control system shall be provided as an integral part of the hygienic HVAC system. | ||||
| The system shall incorporate a microprocessor-based controller capable of monitoring and controlling, as applicable: | ||||
| • Room/supply air temperature. | ||||
| • Humidity set points. | ||||
| • HVAC operating parameters. | ||||
| • Modulating dampers. | ||||
| • Fan speed through VFD control. | ||||
| • Filter differential pressure/condition. | ||||
| • System alarms and safety protections. | ||||
| • Other parameters necessary for reliable operation of the clean-room HVAC system. | ||||
| Access to controller settings and configuration parameters shall be protected through customer-defined password access. | ||||
| Clean-Room Pressure Control | ||||
| The HVAC system shall be designed to maintain the clean room at a positive pressure relative to the surrounding area. | ||||
| The system shall provide appropriate control of supply and return/exhaust air through: | ||||
| • Fan speed control. | ||||
| • Modulating dampers. | ||||
| • Appropriate airflow balancing. | ||||
| • Pressure monitoring and control. | ||||
| The system shall maintain the specified clean-room pressure differential during normal operation. | ||||
| Hygienic Sealing and Construction | ||||
| All AHU panels, access doors, inspection windows, joints, and penetrations shall be properly sealed. | ||||
| The following requirements shall apply: | ||||
| • Gaskets shall be hygienic and non-porous. | ||||
| • Sealing materials shall not support microbiological growth. | ||||
| • Internal surfaces shall be smooth and suitable for cleaning and sanitization. | ||||
| • Construction shall minimize locations where dust, moisture, or contaminants can accumulate. | ||||
| • All joints and connections shall be properly sealed to maintain the required air-tightness and hygienic conditions. | ||||
| Electrical and Control Panel | ||||
| The HVAC electrical/control panel shall include, as a minimum: | ||||
| • Microprocessor controller. | ||||
| • Compressor controls and protection. | ||||
| • Fan/VFD controls. | ||||
| • Temperature and humidity control. | ||||
| • Damper modulation/control. | ||||
| • Filter differential-pressure monitoring. | ||||
| • System status and alarm indications. | ||||
| • Necessary circuit protection. | ||||
| • Contactors, relays, and control accessories. | ||||
| • Password-protected access to control parameters. | ||||
| • All necessary wiring and control components for complete system operation. | ||||
| HVAC Testing, Commissioning and Handover | ||||
| The contractor's scope shall include complete testing and commissioning, including: | ||||
| 1. Installation of all HVAC equipment and accessories. | ||||
| 2. Refrigerant piping and associated works. | ||||
| 3. Electrical power and control wiring. | ||||
| 4. Supply and return air duct connections. | ||||
| 5. Installation and testing of filters. | ||||
| 6. Configuration of the control system. | ||||
| 7. Testing of compressors and independent refrigeration circuits. | ||||
| 8. Testing of fans and VFDs. | ||||
| 9. Testing of modulating dampers. | ||||
| 10. Testing of UV lamps. | ||||
| 11. Verification of temperature set points. | ||||
| 12. Verification of humidity set points. | ||||
| 13. Verification of positive clean-room pressure. | ||||
| 14. Verification of filter differential-pressure monitoring. | ||||
| 15. Functional testing of alarms and safety controls. | ||||
| 16. Air balancing and adjustment as required. | ||||
| 17. Final inspection and commissioning. | ||||
| 18. Handover of the complete operational HVAC system to the client. | ||||
| HVAC Performance Requirement | ||||
| The complete HVAC system shall provide reliable hygienic air conditioning for the clean-room areas and shall maintain the specified: | ||||
| • Temperature. | ||||
| • Relative humidity. | ||||
| • Airflow. | ||||
| • Positive room pressure. | ||||
| • Filtration conditions. | ||||
| • Operational and hygienic requirements. | ||||
| The system shall be designed and installed to minimize the risk of contamination and microbiological growth and shall be suitable for the intended clean-room application. | ||||
| Civil & Architectural Works (Extension and pro existing building) | ||||
| Job: 1 Lot | ||||
| careful dismantling of existing brick/block/masonry walls/partitions (without damaging adjacent structures, finishes, or MEP services), construction of new walls for change rooms, buffer zones, airlocks, and exits as per approved layout, plastering on both sides, and complete painting (primer + finishing coats). All works shall include proper coordination with existing MEP services, scaffolding, debris disposal, and finishing as per approved drawings and relevant standards. | ||||
| All finishes in classified areas shall be cleanroom compatible, non-porous, smooth, easy to sanitize, and compliant with cGMP requirements including epoxy flooring, ceiling, coving, flush finishes, and sealed joints. | ||||
| Providing, supplying, installation, testing and commissioning of containment laboratory doors complete with interlocking system (where required), including stainless steel / powder-coated doors with airtight sealing, view panels (if required), door closers, electromagnetic interlock system ensuring that only one door opens at a time, control panels, sensors, wiring, and all necessary hardware, accessories and complete system as per GMP requirements and approved drawings, complete in all respects. | ||||
| Note: • Interlocking doors shall be provided only in classified areas where required by the clean-room design. | ||||
| • Doors in non-classified areas shall be provided with premium-quality aluminum frames and glass panels. | ||||
| • Doors shall be suitable for the intended operational and hygienic requirements of the respective areas. | ||||
| 5 | Engineering, supply, installation, testing and commissioning of complete pharmaceutical-grade Water Treatment Plant of Capacity 50Ltr/hr for generation, storage and distribution of Purified Water (PW) and Water for Injection (WFI), including raw water pre-treatment and Course filtration, double-pass RO, EDI, distillation unit, SS316L storage tanks as per design capacity, sanitary distribution loop, online monitoring, PLC-based controls, sanitization system, validation (IQ/OQ/PQ), as per WHO standards, complete in all respects. End user will provide feed water quality parameters. By 50 Lt/hr capacity, it shall be read as capacity of production of 50 L/hr WFi. | Clean Utility System (Water Treatment Plant – PW/WFI) | Job | 1 |
| Note: Accordingly, all associated equipment, components, controls, piping, electrical requirements, and accessories shall be sized appropriately for the revised 50 L/hr capacity. The bidder should provide two (02) years Warranty for the equipment. | ||||
| Engineering, supply, installation, testing and commissioning of Steam Pipeline from already installed Boiler Room to the Filling and Supply Line Lab (approx. 500m in length) Design Pressure & Operating Range: 80 to 100 psi (5.5 bar to 6.9 bar) regulated network Design Operating Temperature: 134°C continuous temperature at the point of use Steam Flow Rate Capacity: Minimum peak capacity of 450 kg/h to 600 kg/h complete in all respect along with insulation and auto steam traps. | ||||
| Existing Laminar Floor Hood | ||||
|  | ·       The existing Laminar flow hood unit to be inspected for suitability and condition. |  |  |  |
| ·       Necessary installation, relocation, connection, testing, and commissioning works shall be carried out as required. | ||||
| ·       Any minor modifications necessary for integration with the revised facility shall be included in the contractor's scope. | ||||
| Supply, installation, testing and commissioning of Backup Diesel Generator System 200 KVA including generator set, acoustic enclosure, AMF/ATS panels, fuel system, exhaust, earthing, synchronization (if required), and integration with facility electrical system for uninterrupted power supply to critical loads, complete with testing and commissioning . | ||||
| 9 | Providing, supplying, installation, testing and commissioning of complete Nitrogen Purging system on filling machine. The complete system includes piping network, control valves, pressure regulations integrating with supply system and safe venting arrangements. Operational Delivery Pressure: 1.0 bar to 3.5 bar (Adjustable; regulated from bulk supply pressure of 6-8 bar) Purging Flow Rate Range: 5 to 50 Nm³/h (Dynamically regulated based on filling machine indexing speed and nozzle configuration) Gas Filtration System: Dual-stage filtration: * 1st Stage: 1.0 µm particulate pre-filter * 2nd Stage: 0.22 µm sterile, hydrophobic PTFE gas filter (Point-of-Use, integrity testable) Complete in all respects as per approved lay out, project requirements and applicable standards of DRAP. | Nitrogen Purging System | Job | 1 |
| Providing, supplying, installation, testing and commissioning of complete plumbing and drainage system as per approved layout plan, including water supply lines (PPRC/UPVC/SS as required), valves, fittings, floor drains, traps, manholes, cleanouts, vent piping, sanitary fixtures connections, insulation, supports, and all associated accessories, complete in all respects, ensuring proper slope, leakage testing and compliance with applicable standards and approved drawings plasco/equivalent | ||||
| 11 | Conventional Fire Alarm system: | Fire Alarm System | Â | Â |
| Â | Providing, supplying, installation, testing and commissioning of complete Conventional Fire Alarm System, including main fire alarm control panel with all necessary modules, indicators and backup power supply, compatible with all connected devices; supply and installation of detection devices including conventional smoke detectors with manual call points (MCPs) at designated locations with proper labeling, mounting and accessibility; installation of audible and visual alarm devices including sounders, bells and strobes ensuring adequate coverage throughout the facility; and supply and installation of all required cabling, conduits, junction boxes and accessories with proper routing, support and termination, complete in all respects as per approved layout, relevant codes and standards, and ensuring full system functionality with as required detection devices (sensors), and Sounders and cabling complete work in all respects including main control panel | Â | Â | Â |
| supply, installation, testing and commissioning (EPC) of complete electrical systems for laboratory facility, including detailed design and preparation of drawings for lighting systems (interior and exterior) with fixtures, wiring, circuiting, control systems and compliance with required lux levels and energy efficiency standards; execution of complete power distribution system including cables, conduits, cable trays, receptacles, DBs and panels with load calculations, panel assignments and coordination with all services; design and installation of main and sub-panel boards including feeder sizing, breakers, load balancing and panel board wiring complete with schedules and diagrams; complete earthing and grounding system including electrodes, conductors, bonding and integration with lightning protection and sensitive equipment protection; and provision and installation of backup/emergency power systems including generators, .The scope includes preparation of shop drawings, single-line diagrams, schematics, supply of all materials and equipment, complete installation, termination, testing, commissioning, as-built drawings and handing over of the system, complete in all respects as per approved layout, project requirements and applicable standards. | ||||
| Supply, installation, testing and commissioning of Automatic Vial Washing Machine of Capacity 200 Vials (Range 5 ml to 10ml) with integrated Laminar Flow Hood (LFH) for vaccine production, suitable for washing pharmaceutical glass vials using PW/WFI and sterile compressed air, including SS316L construction, HEPA-filtered ISO 5 / Grade A protection, PLC-based control system, safety interlocks, utility connections, and compliance with GMP requirements, complete in all respects. The bidder should provide two (02) years Warranty for the vial washer. | ||||
| Existing Cold Rooms: Necessary alterations, relocation, modification, reconnection, or adjustment of their existing positions may be carried out as required to suit the revised facility layout and operational requirements. | ||||
| Â | The contractor shall ensure that any modifications do not adversely affect the performance and functionality of the cold rooms. | Â | Â | Â |
| 15 | Testing and Commissioning of Complete System, Submission of As built Drawings, Submittals. Contractor shall support complete HVAC, cleanroom, compressed air system, and water system validation, HEPA integrity testing (PAO), airflow visualization studies, particle count tests, recovery tests 30 minutes, pressure differential verification, temperature/humidity mapping, and all documentation required. | Testing Commissioning | Job | 1 |
| 16 | Waterproofing: Complete waterproofing of the building shall be provided, including: | waterproofing | Job | 1 |
|  | • Internal areas. |  |  |  |
| • External surfaces. | ||||
|  | • Roof areas. |  |  |  |
|  | • All necessary treatment of joints, cracks, penetrations, and other potential sources of water ingress. |  |  |  |
| Â | The waterproofing system shall be suitable for the building conditions and shall provide a durable, watertight installation. Warranty for the waterproofing will be for 7 years. | Â | Â | Â |
| Vinyl Flooring | ||||
| Â | Vinyl flooring shall be provided in designated clean areas where specified in the approved layout/design. | Â | Â | Â |
| Â | The flooring shall be suitable for clean-room/hygienic applications, easy to clean, resistant to routine cleaning and disinfecting agents, and installed with properly sealed joints. | Â | Â | Â |
| Epoxy Flooring | ||||
| Self-leveling epoxy flooring shall be provided in the designated areas. | ||||
| The epoxy flooring system shall provide a smooth, seamless, durable, chemical-resistant, and easily cleanable surface suitable for the intended pharmaceutical/clean-area application. The bidder should provide two (02) years Warranty. | ||||
| Stainless Steel Furniture | ||||
| Stainless steel furniture shall be provided throughout the facility, as applicable, including: | ||||
|  | • Workbenches. |  |  |  |
| • Cabinets. | ||||
| • Drawers. | ||||
|  | • Other required stainless-steel furniture and fixtures. |  |  |  |
| All stainless-steel furniture shall be of suitable hygienic construction, smooth finished, corrosion resistant, and easy to clean. Material should be 304 & 316L whichever is applicable as per DRAP requirements. | ||||
| Storage Racks | ||||
| Â | Suitable storage racks shall be provided throughout the facility as required by the approved layout and operational requirements. | Â | Â | Â |
| The racks shall be constructed from suitable durable and corrosion-resistant SS based materials (as applicable as per DRAP requirements) and shall be appropriate for the intended storage application. | ||||
| Storage Lockers | ||||
| Suitable storage lockers SS based material (as applicable as per DRAP requirements) shall be provided for the facility as required. | ||||
| The windows shall provide suitable sealing, thermal insulation, and lockers shall be durable, hygienic, easy to clean, and suitable for the intended personnel/storage requirements. | ||||
| Windows | ||||
| The fixed-panel windows specified in the previous scope shall be replaced with double-glazed fixed windows. | ||||
| Â | The windows shall provide suitable sealing, thermal insulation, and hygienic construction appropriate to their location. | Â | Â | Â |
| CCTV Surveillance System | ||||
| A complete CCTV surveillance system shall be provided for the entire building. | ||||
| Â | The system shall include all necessary cameras, recording equipment, monitors, storage, networking, power supplies, cabling, accessories, software, installation, configuration, testing, and commissioning required for a complete operational system. | Â | Â | Â |
| The CCTV coverage shall be designed in accordance with the approved building layout and security requirements. The bidder should provide two (02) years Warranty for the whole system. | ||||
| PU Panel Construction for Clean Rooms | ||||
| Â | PU insulated panels shall be provided for the walls and ceilings of the designated clean-room areas. | Â | Â | Â |
| The minimum requirements shall be: | ||||
| • Panel thickness: 50 mm. | ||||
|  | • PU insulation density: 40–42 kg/m³. |  |  |  |
| • Panels shall be suitable for clean-room applications. | ||||
| • Surfaces shall be smooth, hygienic, and easy to clean. | ||||
| • Joints shall be properly sealed to minimize air leakage and prevent accumulation of contaminants & seepage. | ||||
|  | • Panel construction shall be suitable for the required environmental and operational conditions. |  |  |  |
| • Waterproofing of the outside walls shall also be done if required. | ||||
| Â | ||||
| Â | ||||
| Â |
1. Design & Engineering Services
The Contractor shall:
Conduct detailed site survey and assessment of the existing facility.
Prepare architectural, structural, HVAC, MEP and utility designs.
Develop equipment layouts and process flow plans.
Prepare detailed BOQs, specifications and drawings.
Obtain DRAP approval of proposed layouts and designs.
Submit all engineering calculations, shop drawings and technical documents.
Provide DQ, IQ, OQ and PQ documentation.
2. HVAC & Clean Room System
Design, supply, installation, testing and commissioning of:
HVAC extension and upgradation works.
Clean room classifications Grade A, B, C & D.
HEPA filtration systems.
Ducting, VFDs, dampers and air balancing.
Pressure cascade systems.
Differential pressure monitoring.
UV disinfection systems.
Air handling units and associated controls.
Validation and commissioning of complete HVAC system.
3. Civil & Architectural Works
Execution of:
Dismantling and modification of existing structures.
Construction of change rooms.
Airlocks and buffer zones.
Personnel and material exits.
Clean-room compatible finishes.
Epoxy flooring, coving and seamless finishes.
Painting and finishing works.
Waterproofing works.
4. Clean Room Doors & Access Control
Supply and installation of:
Pharmaceutical-grade clean room doors.
Electromagnetic interlocking systems.
Airtight sealing systems.
View panels, sensors and controllers.
GMP-compliant access arrangements.
5. Purified Water & WFI System
Design, supply and commissioning of:
Pharmaceutical Water Treatment Plant.
Purified Water (PW) System.
Water for Injection (WFI) System.
Double Pass RO.
EDI System.
Distillation Unit.
SS316L storage tanks.
Distribution loops.
PLC controls.
IQ/OQ/PQ validation.
6. Steam Distribution System
Supply and installation of:
Steam pipeline from Boiler House to Filling Line Facility.
Steam traps.
Insulation system.
Pressure regulation system.
Testing and commissioning.
7. Existing Equipment Integration
Assessment, relocation and integration of:
Existing Laminar Flow Hood.
Existing AHUs and HVAC equipment.
Existing Cold Rooms.
Existing installed utilities and equipment.
8. Electrical Works
Design, supply and installation of:
Complete electrical distribution system.
Lighting systems.
Power systems.
Earthing and grounding.
Main and sub-panels.
Emergency power integration.
Electrical testing and commissioning.
9. Backup Power System
Supply, installation and commissioning of:
200 KVA Diesel Generator.
Acoustic enclosure.
AMF/ATS panels.
Fuel system.
Synchronization system.
Electrical integration.
10. Nitrogen Purging System
Design and installation of:
Nitrogen purging system for filling machine.
Control valves.
Pressure regulators.
Sterile filtration system.
Safe venting arrangements.
System testing and commissioning.
11. Plumbing & Drainage Works
Supply and installation of:
Water supply lines.
Drainage system.
Manholes and cleanouts.
Sanitary connections.
Leakage testing.
Complete commissioning.
12. Fire Detection System
Supply and installation of:
Conventional Fire Alarm System.
Fire Alarm Control Panel.
Smoke detectors.
Manual Call Points.
Sounders and strobes.
Cabling and accessories.
13. Process Equipment
Supply, installation and commissioning of:
Automatic Vial Washing Machine.
Integrated Laminar Flow Hood.
PLC Control System.
Utility Connections.
GMP-compliant operation.
14. Flooring Works
Provision of:
Vinyl flooring in designated clean areas.
Self-leveling epoxy flooring in classified zones.
Hygienic, seamless and chemical-resistant finishes.
15. Stainless Steel Furniture & Storage Systems
Supply and installation of:
SS Workbenches.
Cabinets and Drawers.
Storage Racks.
Storage Lockers.
GMP-compliant SS304/SS316L furniture.
16. Windows & Clean Room Panels
Supply and installation of:
Double-glazed windows.
PU insulated clean room panels.
Clean room ceilings and wall systems.
Hygienic sealed joints and finishes.
17. CCTV Surveillance System
Design, supply and commissioning of:
CCTV cameras.
NVR/recording equipment.
Monitoring stations.
Networking and storage systems.
Complete security surveillance infrastructure.
18. Validation, Testing & Handover
The Contractor shall:
Perform HVAC validation.
HEPA Integrity (PAO) Testing.
Airflow visualization studies.
Particle count testing.
Recovery testing.
Pressure differential verification.
Temperature and humidity mapping.
Prepare As-Built Drawings.
Submit complete documentation.
Hand over fully operational facility.
19. Warranty & Defect Liability
Two (02) years warranty on installed equipment and systems.
Seven (07) years warranty on waterproofing works.
Six (06) months Defect Liability Period (DLP).
For Individual Positions
| # | Position Title | Quantity | Unit Price (PKR) | Total Price (PKR) | Delivery Location | Delivery Period / Year | Country of Origin |
|---|---|---|---|---|---|---|---|
| 1 | |||||||
| 2 |
| # | Lot Title | Total Lot Price (PKR) | Country of Origin |
|---|---|---|---|
| 1 | [Lot 1 Title] |
The following Special Conditions of Contract shall supplement the General Conditions of Contract. Whenever there is a conflict, the provisions herein shall prevail over those in the Conditions of Contract. The corresponding clause number of the GCC is indicated in parentheses.
Number of GC Clause
Amendments of, and Supplements to, Clauses in the General Conditions of Contract
Definitions
The Procuring Agency is: National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director Park Road, Islamabad Capital Territory
The Supplier is:
The title of the subject procurement is:Extension of Vaccine Filling and Supply Line Facility on Design and Build Model at Biological Production Division (BPD), National Institute of Health Islamabad.
Number of GC Clause 2
Applicable/Governing Law:
The Contract shall be interpreted in accordance with the laws of Islamic Republic of Pakistan
Number of GC Clause 3
Language:
The language of the Contract, all correspondence and communications to be given, and all other documentation to be prepared and supplied under the Contract shall be in English.
Number of GC Clause 4
Notices:
The addresses for the notices are:
Procuring Agency:
National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director
Park Road, Islamabad Capital Territory
+92-333-855-4884
purchaseprocurement58@gmail.com
Contractor/ Bidder:
[Name, address and telephone number].
The Contractor/ Bidder’s Representative(s)
[Name, address, telephone number and e-mail address]
Number of GC Clause 6.1
The Authorized Representatives are:
For the Procuring Agency:
National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director
Park Road, Islamabad Capital Territory
+92-333-855-4884
purchaseprocurement58@gmail.com
For the Bidder:
Name: ………………………
Designation: ……………..
Address: ……………………………..
Number of GC Clause 7
Effectiveness of the contract
The Contractor/Bidder shall be effective within ….. days from the date of signature of the Contract by both parties
Number of GC Clause 8
Commencement of Contract:
The Contractor/ Bidder shall provide Non-Consultancy Services from the effective date of contract.
Number of GC Clause 10.2
Expiration of Contract:
The time period shall be ………………….
Number of GC Clause 14
Termination
In the event of termination of the contract due to any reason as already defined in the General Conditions of Contract, the Bidder shall be responsible for providing to the Authority the Services till the time of alternate arrangements.
Number of GC Clause 16
Conflict of Interest:
The Procuring Agency reserves the right to determine on a case-by-case basis whether the Bidder should be disqualified from providing services due to a conflict of a nature described in Clause GCC C2.
Number of GC Clause 20
Liquidated Damages
If the Bidder fails to provide services as required under the contract or in case of any data loss/data breach or any incident compromising the data security or other such failures related to any services, the Bidder shall pay to the Procuring Agency as Liquidated Damages at a rate of 1.00% to 1.00% of the Contract value, in accordance with the extent of performance failure & the cost of investigating such incidents as judged by the Authority.
Number of GC Clause 21
Performance Guarantee:
The amount of performance guarantee shall be 10.00% of the contract price in acceptable form of Call at Deposit, Bank Guarantee, Demand Draft
Number of GC Clause 27
Currency of Payment:
All the payment to be released to the contractor/Bidder shall be in Pakistani Rupees.
Number of GC Clause F
Payment terms:
Payment will be made to the Bidder against the procured Goods and services according to the actual invoice or running bills submitted by the Bidder against the services provided within the time given in the conditions of the contract.
Number of GC Clause F
Identifying Defects:
The Authority reserves the right at any time to inspect the premises of the provider to inspect the goods and monitor the goods being provided.
Number of GC Clause F 5 & 6
Following is the guidance for Dispute Resolution
Notwithstanding any reference to the arbitration herein, the parties shall continue to perform their respective obligations under the Contract unless they otherwise agree that the Authority shall pay the Bidder any monies due to the Bidder.
Arbitrator’s fee:
The fee shall be specified in Pak Rupees, as determined by the Arbitrator, which shall be shared equally by both parties.
Appointing Authority for Arbitrator:
By the Mutual Consent or in accordance with the provisions of Arbitration Act, 1940, in case the parties fail to reach a consensus on the name of sole arbitrator, any party may submit an application to the Chief Justice Islamabad High Court for appointment of sole arbitrator. The Chief Justice IHC may appoint a former judge of any High Court or Supreme Court as the sole arbitrator to resolve the dispute between the parties.
Rules of procedure for arbitration proceedings:
Any dispute between the Authority and a Bidder who is a national of the Islamic Republic of Pakistan arising in connection with the present Contract shall be referred to adjudication or arbitration in accordance with the laws of the Islamic Republic of Pakistan including Arbitration Act 1940, however above provision shall prevail in referring the case to the Arbitrator.
Place of Arbitration and Award:
The arbitration shall be conducted in English language and place of arbitration shall be at Islamabad. The award of the arbitrator shall be final and shall be binding on the parties.
Date: [insert date (as day, month and year)]
Bid No.:P106243
To: National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director Park Road, Islamabad Capital Territory
We, the undersigned, declare that:
We understand that, according to your conditions, Bids must be supported by a Bid Securing Declaration.
We accept that we will be blacklisted and henceforth cross debarred for participating in respective category of public procurement proceedings for a period of (not more than) six months, if fail to abide with a bid securing declaration, however without indulging in corrupt and fraudulent practices, if we are in breach of our obligation(s) under the Bid conditions, because we:
We understand this Bid Securing Declaration shall expire if we are not the successful
Bidder, upon the earlier of (i) our receipt of your notification to us of the name of the successful Bidder; or (ii) twenty-eight (28) days after the expiration of our Bid.
THIS AGREEMENT made the _____ day of __________ 20_____ between National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director Park Road, Islamabad Capital Territory
(hereinafter called “the Procuring Agency”) of the one part and [name of Bidder] of [city and country of Bidder] (hereinafter called “the Bidder”) of the other part:
WHEREAS the Procuring Agency invited Bids for provision of goods, viz., Extension of Vaccine Filling and Supply Line Facility on Design and Build Model at Biological Production Division (BPD), National Institute of Health Islamabad. (P106243) and has accepted a Bids by the Bidder for the provision of Goods in the sum of [contract price in words and figures] (hereinafter called “the Contract Price”).
NOW THIS CONTRACT WITNESSETH AS FOLLOWS:
1. In this Contract words and expressions shall have the same meanings as are respectively assigned to them in the Conditions of Contract referred to.
2. The following documents shall be deemed to form and be read and construed as part of this Contract, In the event of any ambiguity or conflict between the Contract Documents listed below, the order of precedence shall be the order in which the Contract Documents are listed below:-
3. In consideration of the payments to be made by the Procuring Agency to the Bidder as hereinafter mentioned, the Bidder hereby covenants with the Procuring Agency to provide the Goods related services and to remedy defects therein in conformity in all respects with the provisions of the Contract.
4. The Procuring Agency hereby covenants to pay the Bidder in consideration of the provision of Goods and the remedying of defects therein, the Contract Price or such other sum as may become payable under the provisions of the contract at the times and in the manner prescribed by the contract.
IN WITNESS whereof the parties hereto have caused this Contract to be executed in accordance with their respective laws the day and year first above written.
Signed, sealed, delivered by __________________the ________________ (for the Procuring Agency)
Witness to the signatures of the Procuring Agency:
………………………………………………
Signed, sealed, delivered by __________________the ________________ (for the Procuring Agency)
Witness to the signatures of the Bidder: …………………………………………………
Contract Number: Contract Value: Contract Title:
Dated:
[Name of Supplier] hereby declares that it has not obtained or induced the procurement of any contract, right, interest, privilege or other obligation or benefit from Government of Pakistan or any administrative subdivision or agency thereof or any other entity owned or controlled by it (GoP) through any corrupt business practice.
Without limiting the generality of the foregoing [Name of Supplier] represents and warrants that it has fully declared the brokerage, commission, fee etc. paid or payable to anyone and not given or agreed to give and shall not give or agree to give to anyone within or outside Pakistan either directly or indirectly through any natural or juridical person, including its affiliate, agent, associate, broker, consultant, director, promoter, shareholder, sponsor or subsidiary, any commission, gratification, bribe, finder's fee or kickback, whether described as consultations fee or otherwise, with the object of obtaining or inducing the procurement of a contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP, except that which has been expressly declared pursuant hereto.
[Name of Supplier] certifies that it has made and will make full disclosure of all agreements and arrangements with all persons in respect of or related to the transaction with GoP and has not taken any action or will not take any action to circumvent the above declaration, representative or warranty.
[Name of Supplier] accepts full responsibility and strict liability for making and false declaration, not making full disclosure, misrepresenting fact or taking any action likely to defeat the purpose of this declaration, representation and warranty. It agrees that any contract, right interest, privilege or other obligation or benefit obtained or procured as aforesaid shall, without prejudice to any other right and remedies available to GoP under any law, contract or other instrument, be voidable at the option of GoP.
Notwithstanding any rights and remedies exercised by GoP in this regard, [Name of Supplier] agrees to indemnify GoP for any loss or damage incurred by it on account of its corrupt business practices and further pay compensation to GoP in an amount equivalent to ten time the sum of any commission, gratification, bribe, finder's fee or kickback given by [Name of Supplier] as aforesaid for the purpose of obtaining or inducing the procurement of any contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP.
To: National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director Park Road, Islamabad Capital Territory
WHEREAS [name of Bidder] (hereinafter called “the Bidder”) has undertaken, in pursuance of Contract No. [reference number of the contract] dated [insert date] for provision of Goods(hereinafter called “the Contract”).
AND WHEREAS it has been stipulated by you in the said Contract that the Bidder shall furnish you with a Bank Guarantee by a reputable bank for the sum specified therein as security for compliance with the Bidder’s performance obligations in accordance with the Contract.
AND WHEREAS we have agreed to give the Bidders guarantee:
THEREFORE, WE hereby affirm that we are Guarantors and responsible to you, on behalf of the Bidder, up to a total of [amount of the guarantee in words and figures], and we undertake to pay you, upon your first written demand declaring the Bidder to be in default under the Contract and without cavil or argument, any sum or sums within the limits of [amount of guarantee] as aforesaid, without your needing to prove or to show grounds or reasons for your demand or the sum specified therein.
This guarantee is valid until the: [insert date]
Signature and seal of the Guarantors
_____________________________________________________________________
[name of bank or financial institution]
_____________________________________________________________________
[address]
_____________________________________________________________________
[date}