In terms of Rules 65 of Public Procurement Rules, 2026 Grievance Redressal Committee (GRC) is notified for the subject procurement and notification copy is available on the procuring agency’s website and on Authority’s website at (www.ppra.org.pk).
National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director
Park Road, Islamabad Capital Territory
+92-333-855-4884
purchaseprocurement58@gmail.com
The following specific data for the procurement of Goods to be procured shall complement, supplement, or amend the provisions in the Instructions to Bidders (ITB). Whenever there is a conflict, the provisions herein shall prevail over those in ITB.
|
BDS Clause Number |
ITB Number |
Amendments of, and Supplements to, Clauses in the Instruction to Bidders |
A. Introduction |
||
|
1 |
1.1 |
Name of Procuring Agency: National Institutes of Health (NIH) (National Institutes of Health (NIH)) The subject of procurement is: Re-routing/Installation of Water supply pipeline along Allergy Center Road heading towards NIH Colony at National Institute of Health, Islamabad Expected commencement date: Thursday, December 31, 2026 |
|
2. |
2.1 |
Financial year for the operations of the Procuring Agency: 2026-27 Name and identification number of the Contract: P203478 |
| 3. | 3.1 | JV/Consortium or Association Allowed: No Number of JV/Consortium Members: Nil |
B. Bidding Documents |
||
|
4. |
6.2 & 6.4 |
The Bidders may seek clarifications through EPADS v2.0: Clarification Date: Sunday, November 29, 2026 |
| 5. | 7.2 |
Any addendum, in case issued, shall be published on National Institutes of Health (NIH) (National Institutes of Health (NIH)) website and on EPADS v2.0. |
C. Preparation of Bids |
||
| 6. |
8.1 |
List of documents required along with the bid: No |
| 7. | 9.1 |
The qualification criteria to establish the supply / production capability of the bidder. see Eligibility Criteria |
| 8. | 11.2 |
|
| 9. | 11.1 | Price schedule will be provided according to the format defined and acquired. see section price schedule. |
| 10. | 11.4 |
Specifications: see section of specifications. |
|
11. |
11.5 & 13.5 |
The price shall be Fixed. |
| 12. |
14.1 |
Currency of the Bids shall be : PKR |
| 13. |
16.1 |
The Bids/Bid Validity period shall be: 120 Days |
| 14. |
17.1 |
The amount of Bid Security shall be as defined in Bid Security Section for items and lots given in BDS 6 |
| 15. | 17.2 |
The Bid Security shall be in the form of: Pay Order, Call at Deposit, Demand Draft |
| 16. | 15.1 |
Alternative Bids to the requirements of the bidding documents will not be permitted. |
D. Submission of Bids |
||
|
17. |
18.1 & 21.1 |
Bid shall be submitted online on EPADS v2.0 whereas hard copy of the bid security should be submitted to the following; Park Road, Islamabad Capital Territory Bids that are not submitted on EPADS v2.0 shall be disqualified. The deadline for Bids submission is: Wednesday, December 2, 2026 11:00 AM |
E. Opening and Evaluation of Bids |
||
|
18. |
24.1 |
The Bids opening shall take place on EPADS v2.0. Day : Wednesday Date: December 02, 2026 Time : 11:30 AM |
|
19. |
30.2 |
Selection technique adopted will be: Least Cost Based Selection (LCBS) |
F. Award of Contract |
||
|
20. |
41.1 & 41.2 |
The Performance guarantee shall: 5.00%. The Performance Guarantee shall be acceptable in the form of: Pay Order, Call at Deposit, Bank Guarantee |
| 21. | 45.1 |
Arbitrator shall be appointed by mutual consent of the both parties. |
G. Review of Procurement Decisions |
||
|
22. |
37 |
Grievance against this procurement shall be submitted online on EPADS v2.0. |
All Active Taxpayers shall be eligible to participate in the procurement process, unless expressly excluded or otherwise restricted under the Eligibility Criteria specified by the Procuring Agency.
| Required Registration |
|---|
| NADRA CITIZENSHIP (CNIC/NICOP) FBR (NTN) FBR (GSTN) PEC |
| Eligibility Criteria | Document |
|---|---|
| Affidavit provided by the firm that “firm has never been blacklisted from any organization”. | Yes |
| PEC valid license at the time of opening of bid, Category C6 or above with Specialization code of CE09 or at least CE09(ii) | Yes |
| Documentary proof of at-least two projects of similar nature to be provided above cost of Rs. 5 Million completed in last 5 years | Yes |
| Bidders should have their own offices with telephone numbers, fax numbers and not operating business in their residence, otherwise their bid will not be entertained.( Attach documentary proof) | Yes |
Least Cost Based Selection (LCBS)
Jobs Without Lots :
| Job | Delivery Schedule | Quantity | Bid Security |
|---|---|---|---|
| Re-routing/Installation of Water supply pipeline along Allergy Center Road heading towards NIH Colony at National Institute of Health, Islamabad | Address: Park Road, Islamabad Capital Territory Schedule: 27 Days Quantity: 1900/rft |
1900/rft | 200000 PKR |
No
Jobs Without Lots :
Job: Re-routing/Installation of Water supply pipeline along Allergy Center Road heading towards NIH Colony at National Institute of Health, Islamabad
Specifications / Requirements:
| Sr. No | Ref. No. | Description | Unit | Qty | Rate | Amount | |
|---|---|---|---|---|---|---|---|
| 1 | 124/141 | Providing, supplying, excavation, laying, jointing, installation, testing and commissioning of complete High-Density Polyethylene (HDPE) water supply pipeline for replacement/diversion of the existing water supply pipeline, including all necessary pipes, fittings, valves, connections, excavation, bedding, backfilling, protective works, civil works, testing and commissioning, complete in all respects as per the following specifications: | rft | 1900 | 5263.16 | (Rupees Ten million only) | 10000000 |
| 2 | 1. HDPE Pipe Specifications | ||||||
| 3 | 1. HDPE pipe shall be manufactured from PE100 grade material, suitable for pressurized water supply, conforming to ISO 4427 or equivalent recognized international standard. | ||||||
| 4 | 2. Pipe shall have 315 mm outside diameter, PN16 pressure rating, SDR11 and nominal wall thickness of 28.6 mm, with an approximate internal diameter of 258 mm suitable with the existing pipeline. | ||||||
| 5 | 3. Pipe shall be free from cracks, defects, deformation and damage, with permanent manufacturer's identification, material grade, dimensions, SDR, pressure rating and manufacturing details. | ||||||
| 6 | 4. Manufacturer's technical datasheets, mill/manufacturing certificates, batch test reports, purchase documentation and potable-water suitability certification shall be provided. | ||||||
| 7 | 5. Pipes and fittings shall be new, unused, manufactured from approved material and subject to inspection and approval by the Employer. | ||||||
| 8 | 6. Material should be of Dadex T Flex, IIL, Alpha, Beta or equivalent. | ||||||
| 9 | 2. Excavation, Laying and Backfilling | ||||||
| 10 | 1. Excavation shall be carried out as required at the site which can assessed at the site visit. | ||||||
| 11 | 2. Trench shall be properly prepared and levelled, with required sand/fine granular bedding beneath the pipeline. | ||||||
| 12 | 3. HDPE pipe shall be properly laid, aligned and supported, without sharp bends, kinks, excessive stresses or damage. | ||||||
| 13 | 4. Jointing shall be carried out through butt fusion welding, conforming to ISO 21307 or approved equivalent procedures, using suitable equipment and trained operators. | ||||||
| 14 | 5. All fusion joints shall be inspected and defective joints shall be replaced by the contractor at its own cost. | ||||||
| 15 | 6. Clean sand/approved fine granular material shall be provided around the pipe followed by backfilling and proper compaction in layers. | ||||||
| 16 | 7. The work shall include removal of surplus excavated material, warning tape, ,trench safety arrangements, protection of existing utilities and restoration of affected surfaces. | ||||||
| 17 | 3. Pipe Connections, Fittings and Valves | ||||||
| 18 | The following shall be included in the complete job: | ||||||
| 19 | 1. 02 Nos. connections with the existing water supply pipeline, including sleeve joints of HDPE to Cast Iron , transition fittings, approved couplings, flanges, gaskets, reducers, nuts, bolts and other necessary accessories. | ||||||
| 20 | 2. 02 Nos. CI combination air release/air-vacuum valves, provisionally 1-inch size, PN16 minimum, including suitable branch connections, isolation valves, fittings and installation at approved locations. | ||||||
| 21 | 3. All additional HDPE fittings, bends, tees, reducers, flange adaptors, couplings, mechanical joints, supports and accessories necessary for complete installation. | ||||||
| 22 | 4. Construction of suitable valve chambers and protective arrangements wherever indicated in the approved layout. | ||||||
| 23 | 4. Road/Bridge Crossing and Pipeline Protection | ||||||
| 24 | 1. The pipeline shall be laid through an approved route, considering the ongoing bridge/road construction activities and protection of the pipeline from external loading and future damage. | ||||||
| 25 | 2. Suitable protective casing/sleeve shall be provided at road/bridge crossings wherever specified in the approved design. | ||||||
| 26 | 3. Installation shall not interfere with bridge foundations, road structures, drainage systems or other existing utilities. | ||||||
| 27 | 4. All necessary protection works, excavation, supports, reinstatement and coordination with the concerned construction authority shall be included in the scope. | ||||||
| 28 | 5. The contractor shall ensure that the proposed alignment provides adequate accessibility for future maintenance and minimizes the possibility of recurring damage. | ||||||
| 29 | 6. Cleaning of the existing pipe under the road/bridge so that the passing of this pipe to be installed can be possible. | ||||||
| 30 | 5. Testing and Commissioning | ||||||
| 31 | 1. After installation, the complete pipeline shall undergo hydrostatic pressure testing using water, following ASTM F2164 or an approved equivalent procedure. | ||||||
| 32 | 2. The proposed test pressure shall be 12 bar to be done by the contractor. | ||||||
| 33 | 3. Testing shall be performed using calibrated pressure gauges and suitable equipment in the presence of the Employer/authorized representative. | ||||||
| 34 | 4. All joints, fittings, valves and connections shall be inspected for leakage. Any defects shall be rectified and the pipeline retested at the contractor's cost. | ||||||
| 35 | 5. The pipeline shall be properly flushed, disinfected and commissioned in accordance with applicable potable-water supply requirements. | ||||||
| 36 | 6. Final commissioning shall be carried out after satisfactory testing, verification of water flow and pressure performance, and acceptance by the Employer. | ||||||
| 37 | 6. Warranty and Defect Liability | ||||||
| 38 | The contractor shall provide a minimum one-year warranty/defect liability period from the date of successful commissioning and acceptance. | ||||||
| 39 | The warranty shall cover defects in supplied materials, pipe fittings, joints, fusion welding, workmanship, leakage and installation-related failures. Warranty/guarantee of the whole work and the pipeline of one (01) year. | ||||||
| 40 | Any defect attributable to substandard material or workmanship during the warranty period shall be rectified by the contractor at its own expense. | ||||||
| 41 | The contractor shall provide timely assistance in case of leakage, joint failure or other defects affecting water supply. | ||||||
| 42 | 6. General Terms and Conditions | ||||||
| 43 | a. The bidder shall visit the site before submission of the bid to assess the existing conditions, pipeline route, connections, accessibility and scope of work. | ||||||
| 44 | b. The contractor shall provide all necessary materials, machinery, equipment, skilled labour, transportation, fittings, civil works, jointing, testing and commissioning arrangements for complete execution. | ||||||
| 45 | c. All pipe materials, fittings, valves and accessories shall conform to the specified standards, and relevant certificates, catalogues and technical documentation shall be submitted for approval. | ||||||
| 46 | d. The Employer reserves the right to select pipe/fitting samples for testing at a recognized, reputable and authorized testing laboratory. The cost of contractually required testing shall be borne by the contractor. | ||||||
| 47 | e. All necessary excavation, sand bedding, backfilling, compaction, valve chambers, connections with the existing pipeline, protective works and restoration shall be included in the quoted price. | ||||||
| 48 | f. Any damage caused to existing utilities, structures, roads or other facilities during execution shall be rectified by the contractor at its own expense. | ||||||
| 49 | g. Considering the essential nature of water supply to NIH Colony and departments, the contractor shall execute the work on an urgent priority basis within the stipulated completion period. | ||||||
| 50 | h. The contractor shall provide a minimum one-year warranty covering the quality of supplied materials, fusion joints, fittings, breaking, installation workmanship and leakage-related defects attributable to the contractor. | ||||||
| 51 | i. The contractor shall submit material certificates, purchase order of the pipes, fittings, etc, testing reports, commissioning records, warranty certificate and as-built pipeline layout upon completion. | ||||||
| 52 | j. The quoted lump-sum rate shall include all materials, labour, equipment, excavation, jointing, fittings, valves, testing, commissioning, applicable taxes and incidental works expressly covered under the approved scope. No additional payment shall be admissible for works already included in the contract. | ||||||
| 53 | k. Complete work in all respects shall be executed to the satisfaction of the Employer, in accordance with the approved specifications, site conditions and applicable standards. | ||||||
| 54 | l. Marking of the pipeline with any suitable procedure. | ||||||
| GRAND TOTAL: | Rs 10,000,000.00 |
The contractor shall undertake the complete re-routing, supply, installation, testing and commissioning of approximately 1,900 running feet (RFT) of High-Density Polyethylene (HDPE) water supply pipeline along the designated route from Allergy Center Road towards NIH Colony, National Institute of Health, Islamabad. The work shall include all materials, labour, equipment, machinery, transportation, excavation, pipe laying, jointing, fittings, connections, protective works, testing, commissioning and restoration necessary for completion of the project in all respects.
The detailed scope shall include, but not be limited to, the following:
1. Supply of HDPE Pipeline and Materials
Supply of approximately 1,900 RFT of new, unused PE100-grade HDPE water supply pipe.
Pipe shall have an outside diameter of 315 mm, pressure rating PN16, SDR11 and nominal wall thickness of 28.6 mm.
Pipes shall conform to ISO 4427 or an equivalent recognized international standard and be suitable for pressurized potable-water supply.
Supply of all required fittings, bends, tees, reducers, flange adaptors, couplings, sleeves, gaskets, bolts and other accessories.
Submit manufacturer datasheets, material certificates, batch test reports and potable-water suitability certificates for approval before installation.
Materials shall be of Dadex T Flex, IIL, Alpha, Beta or equivalent approved quality.
2. Excavation and Pipeline Installation
Conduct site inspection and determine the appropriate pipeline alignment and excavation requirements.
Carry out excavation of trenches along the approved route to the required depth and width.
Prepare and level the trench bed and provide suitable sand/fine granular bedding.
Carefully lay, align and support the HDPE pipeline, ensuring that it is free from kinks, sharp bends and excessive stresses.
Carry out pipe jointing through butt-fusion welding in accordance with ISO 21307 or an approved equivalent procedure.
Employ suitable fusion-welding equipment and trained operators.
Inspect all fusion joints and replace defective joints at the contractor's own cost.
3. Connections, Fittings and Valve Installation
Provide and install two connections with the existing water supply pipeline.
Include HDPE-to-Cast Iron transition arrangements, sleeve joints, approved couplings, flanges, reducers, gaskets, nuts, bolts and all necessary accessories.
Supply and install two CI combination air-release/air-vacuum valves, provisionally 1-inch size, PN16 minimum, including branch connections, isolation valves and associated fittings.
Install all additional fittings and accessories required for a complete and leak-proof pipeline system.
Construct suitable valve chambers and protective arrangements wherever required under the approved layout.
4. Road/Bridge Crossing and Pipeline Protection
Lay the pipeline along the approved alignment, taking into account ongoing road and bridge construction activities.
Provide suitable protective casing/sleeves at road and bridge crossings wherever required by the approved design.
Ensure that the pipeline installation does not interfere with bridge foundations, road structures, drainage systems or existing underground utilities.
Carry out necessary protective works, supports and reinstatement.
Clean the existing pipe beneath the road/bridge, as required, to facilitate the passage/installation of the new pipeline.
Ensure that the pipeline alignment remains accessible for future inspection and maintenance.
5. Backfilling and Restoration
Provide clean sand or approved fine granular material around the installed pipeline.
Carry out backfilling in suitable layers with proper compaction.
Install warning tape and provide necessary trench safety arrangements.
Remove surplus excavated material from the site.
Restore roads, pathways, surfaces and other affected areas to their original condition, as applicable.
Repair any damage caused to existing utilities, structures or facilities during execution at the contractor's own expense.
6. Testing, Flushing and Commissioning
Conduct hydrostatic pressure testing of the complete installed pipeline using water in accordance with ASTM F2164 or an approved equivalent procedure.
Carry out the specified pressure test at 12 bar using calibrated pressure gauges and suitable testing equipment.
Conduct testing in the presence of the NIH authorized representative.
Inspect all joints, fittings, valves and connections for leakage.
Rectify any leakage or defects and repeat the testing at the contractor's own cost.
Flush and disinfect the pipeline in accordance with applicable potable-water supply requirements.
Demonstrate satisfactory water flow and pressure performance before final commissioning and acceptance by NIH.
7. Documentation, Warranty and Handover
The contractor shall provide the following documents upon completion:
Manufacturer's material certificates and technical datasheets.
Purchase documentation for supplied pipes, fittings and accessories.
Fusion-jointing and pressure-testing reports.
Flushing and disinfection records.
Final commissioning report.
As-built pipeline alignment/layout drawing.
Minimum one-year warranty/defect liability certificate covering materials, fittings, fusion joints, workmanship and leakage-related defects attributable to the contractor.
Any defect arising from substandard materials or poor workmanship during the warranty/defect liability period shall be rectified by the contractor at its own expense.
8. General Execution Requirements
The contractor shall inspect the site before submitting its bid and satisfy itself regarding the route, accessibility, existing utilities and execution requirements.
The contractor shall arrange all materials, skilled and unskilled labour, machinery, tools, transportation and safety equipment.
All work shall be carried out under the supervision and satisfaction of the NIH authorized representative.
The contractor shall coordinate with NIH and other concerned authorities to avoid disruption to existing services and ongoing construction activities.
Considering the essential nature of water supply to NIH Colony and NIH departments, the work shall be executed on an urgent priority basis.
The complete project shall be finished within the stipulated 10 calendar days from the date of commencement/work order, subject to the contract conditions.
The quoted price shall cover all materials, labour, equipment, excavation, jointing, fittings, valves, testing, commissioning, applicable taxes and incidental works included in the approved scope. No additional payment shall be admissible for items already covered by the contract.
Completion and acceptance: The project shall be considered complete only after successful installation, pressure testing, flushing, disinfection, restoration of affected areas, satisfactory commissioning and submission of the required completion documents, followed by formal acceptance by NIH.
For Individual Jobs
| # | Job Title | Quantity | Unit Price (PKR) | Total Price (PKR) | Delivery Location | Delivery Period / Year | Country of Origin |
|---|---|---|---|---|---|---|---|
| 1 | |||||||
| 2 |
| # | Lot Title | Total Lot Price (PKR) | Country of Origin |
|---|---|---|---|
| 1 | [Lot 1 Title] |
The following Special Conditions of Contract shall supplement the General Conditions of Contract. Whenever there is a conflict, the provisions herein shall prevail over those in the Conditions of Contract. The corresponding clause number of the GCC is indicated in parentheses.
Number of GC Clause
Amendments of, and Supplements to, Clauses in the General Conditions of Contract
Number of GC Clause 1
Definitions
The Procuring Agency is: National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director Park Road, Islamabad Capital Territory
The Supplier is:
The title of the subject procurement is: Re-routing/Installation of Water supply pipeline along Allergy Center Road heading towards NIH Colony at National Institute of Health, Islamabad
Number of GC Clause 2
Applicable/Governing Law:
The Contract shall be interpreted in accordance with the laws of Islamic Republic of Pakistan
Number of GC Clause 3
Language:
The language of the Contract, all correspondence and communications to be given, and all other documentation to be prepared and supplied under the Contract shall be in English.
Number of GC Clause 4
Notices:
The addresses for the notices are:
Procuring Agency:
National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director
Park Road, Islamabad Capital Territory
+92-333-855-4884
purchaseprocurement58@gmail.com
Contractor/ Bidder:
[Name, address and telephone number]
The Contractor/ Bidder’s Representative(s)
[Name, address, telephone number and e-mail address]
Number of GC Clause 6.1
The Authorized Representatives are:
For the Procuring Agency:
National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director
Park Road, Islamabad Capital Territory
+92-333-855-4884
purchaseprocurement58@gmail.com
For the Bidder:
Name: ………………………………………
Designation: ……………………..
Address: …………………………………………..
Number of GC Clause 7
Effectiveness of the contract
The Contractor/Bidder shall be effective within ….. days from the date of signature of the Contract by both parties
Number of GC Clause 8
Commencement of Contract:
The Contractor/Bidder shall provide Non-Consultancy Services from the effective date of contract.
Number of GC Clause 10.2
Expiration of Contract:
The time period shall be ……………………………
Number of GC Clause 14
Termination
In the event of termination of the contract due to any reason as already defined in the General Conditions of Contract, the Bidder shall be responsible for providing to the Authority the Goods till the time of alternate arrangements.
Number of GC Clause 16
Conflict of Interest:
The Procuring Agency reserves the right to determine on a case-by-case basis whether the Bidder should be disqualified from providing goods or services due to a conflict of a nature described in Clause GCC 17.
Number of GC Clause 20
Liquidated Damages
If the Bidder fails to provide services as required under the contract or in case of any data loss/data breach or any incident compromising the data security or other such failures related to any services, the Bidder shall pay to the Procuring Agency as Liquidated Damages at a rate of 1.00% to 1.00% of the Contract value, in accordance with the extent of performance failure & the cost of investigating such incidents as judged by the Authority.
Number of GC Clause 21
Performance Guarantee:
The amount of performance guarantee shall be 5.00% of the contract price in acceptable form of Pay Order, Call at Deposit, Bank Guarantee
Number of GC Clause 27
Currency of Payment:
All the payment to be released to the contractor/Bidder shall be in Pakistani Rupees.
Number of GC Clause 28
Payment terms:
Payment will be made to the Bidder against the procured Goods and services according to the actual invoice or running bills submitted by the Bidder against the services provided within the time given in the conditions of the contract.
Number of GC Clause 29
Identifying Defects:
The Authority reserves the right at any time to inspect the premises of the provider to inspect the goods and monitor the goods being provided.
The above documents would be required even if the equipment has already been imported and is available with the supplier ex-stock
Number of GC Clause 31
Following is the guidance for Dispute Resolution
Notwithstanding any reference to the arbitration herein, the parties shall continue to perform their respective obligations under the Contract.
Rules of procedure for arbitration proceedings:
Any dispute between the Authority and a Bidder shall be referred to arbitration under the laws of Pakistan including Arbitration Act 1940.
Place of Arbitration and Award:
The arbitration shall be conducted in English language and place shall be Islamabad. The award shall be final and binding.
Date: [insert date (as day, month and year)]
Bid No.:P203478
To: National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director Park Road, Islamabad Capital Territory
We, the undersigned, declare that:
We understand that, according to your conditions, Bids must be supported by a Bid Securing Declaration.
We accept that we will be blacklisted and henceforth cross debarred for participating in respective category of public procurement proceedings for a period of (not more than) six months, if fail to abide with a bid securing declaration, however without indulging in corrupt and fraudulent practices, if we are in breach of our obligation(s) under the Bid conditions, because we:
We understand this Bid Securing Declaration shall expire if we are not the successful
Bidder, upon the earlier of (i) our receipt of your notification to us of the name of the successful Bidder; or (ii) twenty-eight (28) days after the expiration of our Bid.
THIS AGREEMENT made the _____ day of __________ 20_____ between National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director Park Road, Islamabad Capital Territory
(hereinafter called “the Procuring Agency”) of the one part and [name of Bidder] of [city and country of Bidder] (hereinafter called “the Bidder”) of the other part:
WHEREAS the Procuring Agency invited Bids for provision of goods, viz., Re-routing/Installation of Water supply pipeline along Allergy Center Road heading towards NIH Colony at National Institute of Health, Islamabad (P203478) and has accepted a Bids by the Bidder for the provision of Goods in the sum of [contract price in words and figures] (hereinafter called “the Contract Price”).
NOW THIS CONTRACT WITNESSETH AS FOLLOWS:
1. In this Contract words and expressions shall have the same meanings as are respectively assigned to them in the Conditions of Contract referred to.
2. The following documents shall be deemed to form and be read and construed as part of this Contract, In the event of any ambiguity or conflict between the Contract Documents listed below, the order of precedence shall be the order in which the Contract Documents are listed below:-
3. In consideration of the payments to be made by the Procuring Agency to the Bidder as hereinafter mentioned, the Bidder hereby covenants with the Procuring Agency to provide the Goods related services and to remedy defects therein in conformity in all respects with the provisions of the Contract.
4. The Procuring Agency hereby covenants to pay the Bidder in consideration of the provision of Goods and the remedying of defects therein, the Contract Price or such other sum as may become payable under the provisions of the contract at the times and in the manner prescribed by the contract.
IN WITNESS whereof the parties hereto have caused this Contract to be executed in accordance with their respective laws the day and year first above written.
Signed, sealed, delivered by __________________the ________________ (for the Procuring Agency)
Witness to the signatures of the Procuring Agency:
………………………………………………
Signed, sealed, delivered by __________________the ________________ (for the Procuring Agency)
Witness to the signatures of the Bidder: …………………………………………………
Contract Number: Contract Value: Contract Title:
Dated:
[Name of Supplier] hereby declares that it has not obtained or induced the procurement of any contract, right, interest, privilege or other obligation or benefit from Government of Pakistan or any administrative subdivision or agency thereof or any other entity owned or controlled by it (GoP) through any corrupt business practice.
Without limiting the generality of the foregoing [Name of Supplier] represents and warrants that it has fully declared the brokerage, commission, fee etc. paid or payable to anyone and not given or agreed to give and shall not give or agree to give to anyone within or outside Pakistan either directly or indirectly through any natural or juridical person, including its affiliate, agent, associate, broker, consultant, director, promoter, shareholder, sponsor or subsidiary, any commission, gratification, bribe, finder's fee or kickback, whether described as consultations fee or otherwise, with the object of obtaining or inducing the procurement of a contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP, except that which has been expressly declared pursuant hereto.
[Name of Supplier] certifies that it has made and will make full disclosure of all agreements and arrangements with all persons in respect of or related to the transaction with GoP and has not taken any action or will not take any action to circumvent the above declaration, representative or warranty.
[Name of Supplier] accepts full responsibility and strict liability for making and false declaration, not making full disclosure, misrepresenting fact or taking any action likely to defeat the purpose of this declaration, representation and warranty. It agrees that any contract, right interest, privilege or other obligation or benefit obtained or procured as aforesaid shall, without prejudice to any other right and remedies available to GoP under any law, contract or other instrument, be voidable at the option of GoP.
Notwithstanding any rights and remedies exercised by GoP in this regard, [Name of Supplier] agrees to indemnify GoP for any loss or damage incurred by it on account of its corrupt business practices and further pay compensation to GoP in an amount equivalent to ten time the sum of any commission, gratification, bribe, finder's fee or kickback given by [Name of Supplier] as aforesaid for the purpose of obtaining or inducing the procurement of any contract, right, interest, privilege or other obligation or benefit in whatsoever form from GoP.
To: National Institutes of Health (NIH) (National Institutes of Health (NIH)), Assistant Director Park Road, Islamabad Capital Territory
WHEREAS [name of Bidder] (hereinafter called “the Bidder”) has undertaken, in pursuance of Contract No. [reference number of the contract] dated [insert date] for provision of Goods(hereinafter called “the Contract”).
AND WHEREAS it has been stipulated by you in the said Contract that the Bidder shall furnish you with a Bank Guarantee by a reputable bank for the sum specified therein as security for compliance with the Bidder’s performance obligations in accordance with the Contract.
AND WHEREAS we have agreed to give the Bidders guarantee:
THEREFORE, WE hereby affirm that we are Guarantors and responsible to you, on behalf of the Bidder, up to a total of [amount of the guarantee in words and figures], and we undertake to pay you, upon your first written demand declaring the Bidder to be in default under the Contract and without cavil or argument, any sum or sums within the limits of [amount of guarantee] as aforesaid, without your needing to prove or to show grounds or reasons for your demand or the sum specified therein.
This guarantee is valid until the: [insert date]
Signature and seal of the Guarantors
_____________________________________________________________________
[name of bank or financial institution]
_____________________________________________________________________
[address]
_____________________________________________________________________
[date}