Standard Bidding Document

📑 Pre-qualification Notice (NIT)

CONSULTANCY SERVICES FOR EXPANSION OF JINNAH TERMINAL COMPLEX [JTC] AND ALLIED AIRSIDE & LANDSIDE FACILITIES AT JINNAH INTERNATIONAL AIRPORT (JIAP), KARACHI

Published on: Wednesday, September 9, 2026 12:15 PM

Ref# : P115765
QR Code

INVITATION FOR PRE-QUALIFICATION

PROCUREMENT OF CONSULTANCY SERVICES

  1. The Pakistan Airports Authority (Planning & Development Directorate) has reserved Funds for the procurement planned for FY 2026-27. The Pakistan Airports Authority (Planning & Development Directorate) intends to apply part of the proceeds of this Fund to cover eligible payments under the contract for the "CONSULTANCY SERVICES FOR EXPANSION OF JINNAH TERMINAL COMPLEX [JTC] AND ALLIED AIRSIDE & LANDSIDE FACILITIES AT JINNAH INTERNATIONAL AIRPORT (JIAP), KARACHIwith the reference of "P115765"
  2. The Pakistan Airports Authority (Planning & Development Directorate) intends to pre-qualify consulting firms / consultants for subsequent issuance of Request for Proposals (RFP), and sign the contract agreement(s) with the selected consultant(s) following the selection process.
  3. The objective of the intended pre-qualification is the provision of "CONSULTANCY SERVICES FOR EXPANSION OF JINNAH TERMINAL COMPLEX [JTC] AND ALLIED AIRSIDE & LANDSIDE FACILITIES AT JINNAH INTERNATIONAL AIRPORT (JIAP), KARACHI" through engagement of qualified consultants, and the purpose of this Pre-qualification Notice is to provide basic information to enable potential applicants to decide whether or not to respond to this Pre-qualification Notice.
  4. Only the pre-qualified applicants shall be invited to participate in the Request for Proposals (RFP) process, and it is expected that the RFP will be issued to the Pre-qualified Applicants.
  5. The pre-qualification process is open to all International Applicants subject to fulfilling the eligibility requirements mentioned in the respective Pre-qualification Documents. Interested Applicants may obtain further information from the Pakistan Airports Authority (Planning & Development Directorate) through EPADS v2.0 during office hours. A complete set of Pre-qualification Documents may be accessed by interested Applicants through EPADS v2.0 at https://epads.gov.pk/opportunities/federal/procurements/115765.
  6. The application, prepared in accordance with the instructions in the Pre-qualification Documents, must be submitted through EPADS v2.0 on or before Tuesday, October 13, 2026 11:00 AM. E-applications will be opened using EPADS v2.0 on the same day at Tuesday, October 13, 2026 11:30 AM. Manual submission of applications shall not be entertained. Applicants who have not yet registered on the new version of EPADS v2.0 may register themselves at https://vendors.epads.gov.pk/. A tutorial to explain the registration process is available at https://www.youtube.com/watch?v=MNW6T38v7tc.

In terms of Rule 48 of Public Procurement Rules, 2004, a Grievance Redressal Committee (GRC) is notified for the subject procurement and the notification copy is available on the procuring agency’s website and on Authority’s website at (www.ppra.org.pk).

 

Pakistan Airports Authority (Planning & Development Directorate), Director Planning & Development
Headquarters Pakistan Airports Authority, Terminal-1, JIAP Karachi
+92-219-924-2773
director.pdev@paa.gov.pk

📑 Instructions to Applicants (ITB)

CONSULTANCY SERVICES FOR EXPANSION OF JINNAH TERMINAL COMPLEX [JTC] AND ALLIED AIRSIDE & LANDSIDE FACILITIES AT JINNAH INTERNATIONAL AIRPORT (JIAP), KARACHI

Published on: Wednesday, September 9, 2026 12:15 PM

Ref# : P115765
QR Code

A. General

B. Contents of the Prequalification Documents

Sections of Prequalifica¬tion Documents

  1. Scope of Application
    1. In connection with the “Invitation for Prequalification”, the Procuring Agency, as defined in Section II (Prequalification Data Sheet abbreviated as PDS), issues this set of  Prequalification Documents (PD) to prospective applicants (also hereinafter referred as Applicants) interested in submitting applications (also hereinafter referred as Applications) to determine the capacity and capability of the Applicant(s) for supply of Goods and Related Services incidental thereto as specified in Section VII (Schedule of Requirements). 
  2. Source of Funds
    1. Source of funds is same as referred in Invitation for Pre-qualification.
  3. Fraud and Corruption
    1. The Procuring Agency requires that the Applicants /Bidders/ Suppliers/Contractors under Government financed contracts, observe the highest standard of ethics during the procurement and execution of such agreements and contracts.
    2. The Applicants/Bidders shall permit and shall cause their agents (whether declared or not), sub-contractors, sub-consultants, service providers, suppliers, and their personnel, to permit the Procuring Agency to inspect all accounts, records and other documents relating to any, Application/Bid submission, Secondary Procurement process, and to have them audited by auditors appointed by the Procuring Agency.
    3. Any communications between the Applicant and the Procuring Agency related to matters of alleged corrupt and fraudulent practices must be made in writing or in electronic forms that provide record of the content of communication.
    4. Procuring Agency will reject an application or bid or proposal, if it is established that the Applicant or the Bidder or Prosper was engaged in corrupt and fraudulent practices in competing for the contract. 
    5. Procuring Agency will also declare the Applicant as blacklisted in accordance with rules and predefined standard mechanism.
  4. Eligible Applicants
    1.  An Applicant may be a private entity, a state-owned enterprise or institution subject to ITB 4.6, or any combination of such entities in the form of a joint venture (JV) under an existing JV agreement or with the intent to enter into such an agreement supported by a letter of intent.
      In case of single (private or state-owned entity), it shall be liable for execution of all the provisions of the Contract Agreement.
      In the case of a joint venture, all members shall be jointly and severally liable for the execution of all the provisions of the Contract Agreement (if signed b/w the Procuring Agency and the JV), in accordance with the Contract conditions that apply.
      The JV shall nominate a Representative who shall have the authority to conduct all business for and on behalf of any and all the members of the JV during the Prequalification process, Bidding process (in the event the prequalified JV submits a Bid) and during the period of contract agreement and contract execution (in the event the JV is awarded the Contract). Unless specified in the PDS, there is no limit on the number of members in a JV.
    2. An Applicant may apply for Prequalification both individually, and as part of a joint venture, or participate as a subcontractor. If prequalified as a JV only, it will not be permitted to bid for the same contract as an individual entity. Bids submitted in violation of this provision will be rejected.
    3. An Applicant and any of its affiliates (that directly or   indirectly control, are controlled by or are under common control with that entity) may submit its Application for Prequalification either individually, as joint venture or as a sub-contractor among them for the same contract. However, if prequalified only one prequalified Applicant will be allowed to bid for the same contract. All Bids submitted in violation of this provision will be rejected.
    4. Applicants shall be considered to have a conflict of interest, if they participated as a consultant in the preparation of the design or technical specifications or have been hired or proposed to be hired by the Procuring Agency for execution of subsequent Contract Agreement. In addition, Applicants may be considered to have a conflict of interest if they have a close business or family relationship with such professional staff of the Procuring Agency (or a recipient of a part of the funds) who: 
      1. are directly or indirectly involved in the preparation of the Prequalification Documents or Bidding Documents or specifications of Contract and/or the Prequalification or Bid evaluation process of such Contract; or
      2. would be involved in the implementation or supervision of such Agreement t, unless the conflict stemming from such relationship has been resolved throughout the Procurement Process, Bidding.
    5. An Applicant that has been declared debarred or blacklisted shall be ineligible to be prequalified to bid  for such period of time and for such type of procurement for which he has been declared debarred or blacklisted. The list of debarred firms and individuals is available at PPRA’s website.
    6. An Applicant shall provide such documentary evidence for determining the eligibility of the Applicant to the reasonable satisfaction of the Procuring Agency.
  5. Eligibility (in terms of Nationality)
    1. Applicants may be ineligible if they are nationals of ineligible countries as indicated in Section V. 

B. Contents of the Prequalification Documents

  1. Sections of Prequalification Documents
    1. This set of Prequalification Documents consists of Parts 1 and 2 which comprise all the sections indicated below, and which should be read in conjunction with any Addendum issued in accordance with ITA 8.
      PART 1 Prequalification Procedures PART 2 Supply Requirements
      • Section I -    Instructions to Applicants (ITA)
      • Section II - Prequalification Data Sheet (PDS)
      • Section III - Qualification Criteria and Requirements
      • Section IV - Application Forms
      • Section V - Eligible Countries
      • Section VI - Fraud and Corruption
      • Section VII – Schedule of Requirements 
    2. The Procuring Agency accepts no responsibility for the completeness of the Prequalification documents, responses to requests for clarification, the minutes of the pre-Application meeting (if any), or Addenda to the Prequalification documents in accordance with ITA 8. In case of any discrepancies, documents issued directly through ePADS shall prevail.
    3. The Applicant is expected to examine all instructions, forms, and terms in the Prequalification Documents and to furnish with its Application all information or documentation as is required by the Prequalification Documents.
  2. Clarification of Pre-qualification Documents and Pre-Application Meeting
    1. An Applicant requiring any clarification of the Pre-qualification Documents shall contact the Procuring Agency in writing through ePADS as. The Procuring Agency will respond in writing through ePADS to any request for clarification provided that such request is received no later than three (03) days prior to the deadline for submission of the Applications. The Procuring Agency shall forward a copy of its response to all prospective Applicants through ePADS who have obtained the Prequalification Documents from ePADS , including a description of the inquiry but without identifying its source. If so indicated in the PDS, the Procuring Agency shall also promptly publish its response  through ePADS . Should the Procuring Agency deem it necessary to amend the Prequalification Documents as a result of a clarification, it shall do so in accordance with the provisions of ITA 16.2.
    2. If indicated in the PDS, the Applicant’s designated representative is invited at the Applicant’s cost to attend a pre-Application meeting through online platform / EPADS v2.0 as per date and time mentioned in the PDS. During this Pre-Application meeting, prospective Applicants may request clarification of the schedule of requirement, the qualification criteria or any other aspects of the Pre-qualification Documents.
    3. Minutes of the Pre-Application meeting, if applicable, including the text of the questions asked by Applicants, including those during the meeting (without identifying the source) and the responses given, together with any responses prepared after the meeting will be transmitted promptly through ePADS to all prospective Applicants who have obtained the Pre-qualification Documents. Any modification to the Pre-qualification Documents that may become necessary as a result of the pre-Application meeting shall be made by the Procuring Agency exclusively through the use of an Addendum pursuant to ITA 8 and through EPADS v2.0. Non-attendance at the pre-Application meeting will not be a cause for disqualification of an Applicant.
  3. Amendment of Prequalifica¬tion Documents
    1. At any time prior to the deadline for submission of Applications, the Procuring Agency may amend the Prequalification Documents by issuing an Addendum through EPADS v2.0
    2. Any Addendum issued shall be part of the Prequalification Document and shall be communicated in writing through ePADS to all Applicants who have obtained the Prequalification Documents from the Procuring Agency. The Procuring Agency shall promptly publish the Addendum at the Procuring Agency’s web page and EPADS v2.0.
      Provided that an Applicant who had already submitted their Applications prior to the issuance of any such addendum shall have the right to withdraw his already submitted Application and submit the revised Application prior to the original or extended Application submission deadline through EPADS v2.0.
    3. To give Applicants reasonable time to take an Addendum into account in preparing their Applications, the Procuring Agency may at its discretion, extend the deadline for the submission of Applications in accordance with ITA 16.2: 
      Provided that the Procuring Agency shall extend the deadline for submission of Applications, if such an addendum is issued within last three (03) days of the Application submission deadline.

C. Preparation of Applications

  1. Cost of Applications
    1. The Applicant shall bear all costs associated with the preparation and submission of its Application. The Procuring Agency will in no case be responsible or liable for those costs, regardless of the conduct or outcome of the Pre-qualification process.
  2. Language of Application
    1. The Application as well as all correspondence and documents relating to the Pre-qualification exchanged by the Applicant and the Procuring Agency, shall be written in the language specified in the PDS. Supporting documents and printed literature that are part of the Application may be in another language, provided they are accompanied by an accurate translation of the relevant passages in the language specified in the PDS, in which case, for purposes of interpretation of the Application, the translation shall govern.
  3. Documents Comprising the Application
    1. The Application shall comprise the following:
      1. Application Submission Letter, in accordance with ITA 12.1;
      2. Eligibility: documentary evidence establishing the Applicant’s eligibility, in accordance with ITA 13.1;
      3. Qualifications: documentary evidence establishing the Applicant’s qualifications, in accordance with ITA 14; and
      4. any other document required as specified in the PDS. 
    2. Application Submission Letter
      1. The Applicant shall complete an Application Submission Letter as provided in Section IV (Application Forms). This Form must be completed without any alteration to its format.
    3. Documents Establishing the Eligibility of the Applicant
      1. To establish its eligibility in accordance with ITA 4, the Applicant shall complete the eligibility declarations in the Application Submission Letter and Form ELI-1.1 (eligibility), included in Section IV (Application Forms).
    4. Documents Establishing the Qualifications of the Applicant
      1. To establish its qualifications to perform the contract(s) in accordance with Section III (Qualification Criteria and Requirements), the Applicant shall provide the information requested in the corresponding Information Sheets included in Section IV (Application Forms).
      2. Wherever an Application Form requires an Applicant to state a monetary amount, Applicants should indicate the Pak Rupee equivalent using the rate of exchange determined as follows:
        1. for turnover or financial data required for each year - Exchange rate prevailing on the last day of the respective calendar year (in which the amounts for that year is to be converted).
        2. value of single contract - Exchange rate prevailing on the date of the contract.
      3. Exchange rates shall be taken from the publicly available source identified in the PDS. Any error in determining the exchange rates in the Application may be corrected by the Procuring Agency.
      4. The documentary evidence of the Applicant’s qualifications to conclude a contract Agreement, shall establish to the Procuring Agency’s satisfaction:
        1. that, if required in the BDS, an Applicant that does not manufacture or produce the Goods it offers to supply shall submit the Manufacturer’s Authorization using the form included in Section IV A (Bidding Forms) to demonstrate that it has been duly authorized by the manufacturer or producer of the Goods to supply these Goods in the Procuring Agency’s Country;
        2. that, if required in the BDS, in case of an Applicant not doing business within Islamic Republic of Pakistan (or the country where the procurement is being made), the Applicant is, or will be, (if awarded the call off contract) represented by an Agent in the country, equipped and able to carry out the Supplier’s maintenance, repair, and spare parts stocking obligations in respect of the Goods.

D. Submission of Applications

  1. Submission of the Applications through EPADS v2.0
    1. The Bidder shall prepare and submit Bid with due diligence after carefully reading all the terms and condition before submission through ePADS in accordance with the procedures specified in the PDS.
    2. In case the Applicant is a JV, the Application shall submit an authorized representative of the JV on behalf of the JV and so as to be legally binding on all the members as evidenced by a power of attorney signed by their legally authorized signatories.
  2. Deadline for Submission of Applications
    1. Applicants shall be submitted through ePADS no later than the deadline indicated in the PDS.
    2. If required in accordance with the provisions of ITA 8.3, the Procuring Agency will extend the deadline for the submission of Applications, in which case all rights and obligations of the Procuring Agency and the Applicants subject to the previous deadline shall thereafter be subject to the deadline as extended.
    3. The deadline will be extended in the same manner as that of original Invitation for Prequalification (or the advertisement) through EPADS v2.0.
  3. Opening of Applications
    1. The Procuring Agency shall open all Applications on the date and time specified in the PDS through EPADS v2.0. Late Applications shall be treated in accordance with ITA 16.1.

E. Procedures for Evaluation of Applications

  1. Confidentiality
    1. Information relating to the Applications, their evaluation and results of the Prequalification shall not be disclosed to Applicants or any other persons not officially concerned with the Prequalification process until the notification of Prequalification results is made to all Applicants in accordance with ITA 26 through EPADS v2.0.
    2. From the deadline for submission of Applications to the time of notification of the results of the Prequalification in accordance with ITA 26, any Applicant that wishes to contact the Procuring Agency on any matter related to the Prequalification process may do so only in writing through EPADS v2.0
  2. Clarification of Applications
    1. To assist in the evaluation of Applications, the Procuring Agency may, ask an Applicant for a clarification (including missing documents) of its Application, to be submitted within a stated reasonable period of time. Any request for clarification from the Procuring Agency and all clarifications from the Applicant shall be in writing through EPADS v2.0
    2. If an Applicant does not provide clarifications and/or documents requested by the date and time set in the Procuring Agency’s request for clarification, its Application shall be evaluated based on the information and documents available at the time of evaluation of the Application.
  3. Responsiveness of Applications
    1. The Procuring Agency may reject any Application which is not responsive to the requirements of the Prequalification Documents. In case the information furnished by the Applicant is incomplete or otherwise requires clarification as per ITA 19.1, and the Applicant fails to provide satisfactory clarification and/or missing information within prescribed time, it may result in disqualification of the Applicant.
  4. Margin of Preference
    1. Unless otherwise specified in the PDS, a margin of preference shall not apply in the Bidding process resulting from this Pre-qualification.
  5. Sub-contractors
    1. Subcontractors’ qualification and experience will not be considered for evaluation of the Applicant. The Applicant on its own (without taking into account the qualification and experience of the Subcontractor) should meet the qualification criteria.

F. Evaluation of Applications and Prequalification of Applicants

  1. Evaluation of Applications
    1. The Procuring Agency shall use the factors, methods, criteria, and requirements defined in Section III, Qualification Criteria and Requirements, to evaluate the qualifications of the Applicants, and no other methods, criteria, or requirements shall be used. The Procuring Agency reserves the right to waive minor deviations from the qualification criteria if they do not materially affect the technical capability and financial resources of an Applicant to perform the contract, however subject to the provisions of ITA 25.
    2. Subcontractors proposed by the Applicant shall be fully qualified for their parts of the Scope of Supply of the Goods and Allied Services.
    3. In case of multiple contracts, Applicants should indicate in their Applications the individual contract or combination of contracts in which they are interested.  The Procuring Agency shall prequalify each Applicant for the maximum combination of contracts for which the Applicant has thereby indicated its interest and for which the Applicant meets the appropriate aggregate requirements. The Qualification Criteria and Requirements are mentioned in Section III. 
      Only the qualifications of the Applicant shall be considered.  The qualifications of other related entities such as the Applicant’s subsidiaries, parent entities, affiliates, subcontractors or any other firm(s) different from the Applicant shall not be taken into consideration in determining the qualifications of the Applicant.
  2. Procuring Agency’s Right to Accept or Reject Applications
    1. The Procuring Agency reserves the right to accept or reject all the Applications, and to annul the Prequalification process at any time, without thereby incurring any liability to the Applicants.  However, the procuring agency shall record its reasons and justifications on EPADS v2.0, duly approved by the Principal Accounting Officer or Head of Organization.
  3. Pre-qualification of Applicants
    1. All Applicants whose Applications substantially meet or exceed the specified qualification requirements will be prequalified by the Procuring Agency.
    2. An Applicant may be “conditionally prequalified,” that is, qualified subject to the Applicant submitting or correcting certain specified nonmaterial documents or deficiencies to the satisfaction of the Procuring Agency. 
    3. Applicants that are conditionally prequalified will be so informed along with the statement of the condition(s) which must be met to the satisfaction of the Procuring Agency before or at the time of submitting their Bids.
  4. Notification of Prequalification
    1. The Procuring Agency shall notify all Applicants in writing through EPADS v2.0 indicating the names of those Applicants who have been prequalified or conditionally prequalified. In addition, those Applicants who have been disqualified will be informed separately through EPADS v2.0.
    2. The procuring agency shall communicate to those suppliers or contractors who have not been pre-qualified the reasons for not pre-qualifying them through EPADS v2.0
  5. Request for Bids
    1. Promptly after the notification of the results of the Prequalification, the Procuring Agency will invite the Bids from all the Applicants that have been prequalified through EPADS v2.0.
  6. Changes in Qualifications of Applicants
    1. Any change in the structure or formation of an Applicant after being prequalified in accordance with ITA 25 and invited to bid (including, in the case of a JV, any change in the structure or formation of any member thereto) shall be subject to the written approval of the Procuring Agency prior to the deadline for submission of Bids. Such approval shall be denied if:
      1. a prequalified Applicant proposes to associate with a disqualified Applicant or in case of a disqualified joint venture, any of its members;
      2. as a consequence of the change, the Applicant no longer substantially meets the qualification criteria set forth in Section III, Qualification Criteria and Requirements; or
      3. in the opinion of the Procuring Agency, the change may result in a substantial reduction in competition. 
    2. Any such change should be submitted to the Procuring Agency before the date of “Invitation to Bids”. 
  7. Redressal of Grievances
    1. Procuring agency shall constitute a Grievance Redressal Committee (GRC) and proceed in accordance with the procedure and mechanism defined under Rule-48 of Public Procurement Rules, 2004.
    2. The GRC shall not have any of the members of Procurement Evaluation Committee. The committee must have one subject specialist depending on the nature of the procurement. 
  8. Mechanism of Blacklisting
    1. The procuring agency shall initiate blacklisting or debarment proceedings  against any bidder, supplier or contractor in accordance with the mechanism prescribed under Rule-19 of Public Procurement Rules, 2004 read with “Mechanism for Blacklisting Regulations, 2024”.

📑 Pre-qualification Data Sheet (BDS)

CONSULTANCY SERVICES FOR EXPANSION OF JINNAH TERMINAL COMPLEX [JTC] AND ALLIED AIRSIDE & LANDSIDE FACILITIES AT JINNAH INTERNATIONAL AIRPORT (JIAP), KARACHI

Published on: Wednesday, September 9, 2026 12:15 PM

Ref# : P115765
QR Code

Prequalification Data Sheet (PDS)

The following specific data for the Prequalification of Applicants shall complement, supplement, or amend the provisions in the Instructions to Applicants (ITA). Whenever there is a conflict, the provisions herein shall prevail over those in ITA.

PDS Clause Number
ITA Number

Amendments of, and Supplements to, Clauses in the Instructions to Applicants

A. General

PDS Clause Number 1
ITA Number 1.1

Identification Number of the Invitation for Prequalification: P115765
The Procuring Agency is: Pakistan Airports Authority (Planning & Development Directorate)
List of Service Contracts:
See section services and Lots

PDS Clause Number 2
ITA Number 2.1

The name of Procuring Agency is: Pakistan Airports Authority (Planning & Development Directorate)
The name of Project / Procurement is: CONSULTANCY SERVICES FOR EXPANSION OF JINNAH TERMINAL COMPLEX [JTC] AND ALLIED AIRSIDE & LANDSIDE FACILITIES AT JINNAH INTERNATIONAL AIRPORT (JIAP), KARACHI

PDS Clause Number 3
ITA Number 4.2

Maximum number of members in a Joint Venture (JV): 3

PDS Clause Number 4
ITA Number 4.5

A list of debarred firms and individuals is available on PPRA website: https://ppra.gov.pk

B. Contents of the Prequalification Document

PDS Clause Number 5
ITA Number 7.1

For clarification, the Applicant shall seek clarifications through: EPADS v2.0

PDS Clause Number 6
ITA Number 7.1 & 8.2

Information related to Prequalification shall be published on: EPADS v2.0

PDS Clause Number 7
ITA Number 7.2

Pre-Application Meeting: Clarification Date: Tuesday, October 6, 2026

C. Preparation of Applications

PDS Clause Number 8
ITA Number 10.1

This Prequalification Document has been issued in the language: English

PDS Clause Number 9
ITA Number 11.1(d)

Additional documents to be submitted through EPADS v2.0:
No

PDS Clause Number 10
ITA Number 14.2

Source for determining exchange rates: Not Applicable

D. Submission of Applications

PDS Clause Number 11
ITA Number 16.1

Deadline for Application Submission:
Day: Tuesday
Date: Tuesday, October 13, 2026
Time: 11:00 AM

PDS Clause Number 12
ITA Number 17.1

Opening of Applications shall be conducted through: EPADS v2.0
Day: Tuesday
Date: Tuesday, October 13, 2026
Time: 11:30 AM
Virtual participation link: https://vendors.epads.gov.pk/

E. Procedures for Evaluation of Applications

PDS Clause Number 13
ITA Number 21.1

Margin of Domestic Preference: Not Applicable
(Applicable only if authorized in Procurement Plan)

PDS Clause Number 14
ITA Number 29.1

Prequalification-related complaints / grievances shall be submitted in writing through: EPADS v2.0
A complaint may challenge:

  • The terms of the Prequalification Documents
  • The Procuring Agency’s decision not to prequalify an Applicant

Eligibility & Qualification Criteria

Bidder's Type Required Registration

Any

FBR (NTN)

SECP

PEC

Eligibility Criteria Document
Applicant shall be a Joint Venture comprising a Foreign Lead Partner that is an internationally recognized engineering firm duly registered with a relevant international engineering body, in association with a local engineering firm registered in accordance with the PEC Bye-Laws. Evidence of Lead Partner being an internationally recognized engineering firm registered with a relevant international engineering body shall be provided. Yes
The local JV partner shall possess valid Pakistan Engineering Council (PEC) registration with Profile Code 1216 and Service Codes 0531, 0532, 0537, 0540, and 0547, for the relevant consultancy services. Documentary evidence of the current PEC registration shall be submitted. Yes
Foreign firms must form a Joint Venture (JV) with a PEC-registered Pakistani firm. At the shortlisting stage, only a Letter of Intent (LOI) to form JV on each partner's letterhead is required. Project-specific PEC registration is not needed at this stage. To proceed to the RFP stage, shortlisted firms must submit evidence of the JV's project-specific PEC registration with their proposal. Yes
Local Applicant/JV member(s) shall be registered with the Federal Board of Revenue (FBR) as active taxpayers and active Sales Tax Registration with relevant Revenue Board. Foreign JV member(s) shall provide registration with the relevant authority in the jurisdiction of registration Yes
Local Applicant/JV member(s) shall provide valid registration with the Securities & Exchange Commission of Pakistan (SECP), where applicable. Foreign JV member(s) shall provide certificate of incorporation/registration in the country of origin. Yes
Letter of Application (Annexure A), duly signed by the authorized representative of the Applicant. Yes
JV Agreement or Letter of Intent (LOI) to form a JV, duly signed by all participating members and clearly identifying the Lead Partner and the local PEC-registered partner. Yes
Power of Attorney, on non-judicial stamp paper valuing PKR 500, specifically authorizing the authorized representative to sign and submit the shortlisting application on behalf of the Applicant/JV. Yes
Affidavit/undertaking of non-blacklisting/debarment and confirmation that the Applicant/JV members are not ineligible under the applicable procurement regulatory framework Yes
Affidavit/undertaking confirming that all documents, particulars and information submitted with the shortlisting application are true, complete and correct Yes
Affidavit/undertaking confirming that the Applicant/JV members have not indulged in corrupt, fraudulent or collusive practices in competing for contracts. Yes
Declaration regarding absence of actual or potential conflict of interest with the Employer, its staff, consultants, contractors or other entities engaged for the assignment. Yes

Evaluation Criteria

Quality Based Selection (QBS)

Weightage (Without Financial Criteria)

Technical Evaluation %
100
Technical Marks300
Passing Marks210
Financial Soundness – Refer to Section 3.3.1.1. of Evaluation Criteria Annexure
Average Annual Turnover for any three of last five the last five completed financial years based on audited financial statements. Average Turnover = [(Year 1 + Year 2 + Year 3)] ÷ 3• 09 marks if average annual turnover is PKR 400 million or its equivalent in US$.• Three (03) additional mark for every PKR 100 million or equivalent increase in average annual turnover above PKR400 million.• Full 15 marks for average annual turnover of PKR 600 million or above Attach audited financial statements duly certified by a Chartered Accounting Firm submitted with Form A-4 (Qualitative)(Doc Required)15
Average annual working capital for any three of last five completed financial years based on audited financial statements. Average Working Capital = [(Year 1 + Year 2 + Year 3)] ÷ 3• 09 marks if average working capital is PKR 300 million or its equivalent in US$.• Three (03) additional mark for every PKR 50 million orequivalent increase in average working capital above PKR 300million.• Full 15 marks for average working capital of PKR 400 million or above Attach audited financial statements duly certified by a Chartered Accounting Firm submitted with Form A-4 (Qualitative)(Doc Required)15
Engineering Design Experience - Refer to Section 3.3.1.2. of Evaluation Criteria Annexure
Experience in successfully completing international airport passenger terminal projects handling at least ten (10) million passengers per annum (MPPA) within the last fifteen (15) years. Attach relevant Consultancy Services Completion Certificate or other satisfactory supporting document with Forms A-2 and A-3. (Qualitative)(Doc Required)

  03 or more projects   (90)

  02 projects   (60)

  01 project   (30)

90
Experience of at least one (01) project involving the expansion of Terminal Building & allied facilities on an operational international airport site handling at least five (05) million passengers per annum (MPPA) within the last fifteen (15) years. 60 points for one qualifying completed project Attach relevant Consultancy Services Completion Certificate or other satisfactory supporting document with Forms A-2 and A-3. (Qualitative)(Doc Required)60
Key Personnel - Refer to Section 3.3.1.3. of Evaluation Criteria Annexure
Team Leader / Project Manager [Must be current employee of the foreign Lead Partner]: Bachelor’s degree in Civil Engineering [2.4] Masters in Transportation Engineering, Airport Planning or related aviation infrastructure discipline. [0.6] Minimum 20 years general experience in Civil Engineering [2.4] Minimum 10 years in airport master planning and design; or handled at least 04 Airport Master design [9.6] Attach Form A6 and A7 for the proposed key expert and the required documentary evidence. For foreign experts, registration with the relevant professional authority in the country of practice, where applicable, shall be submitted in place of PEC registration. Documentary evidence of qualifications shall be provided for each Key Expert. Documents in foreign languages must include an English translation. (Qualitative)(Doc Required)15
Airport Planner / Constructability Specialist [Must be current employee of the foreign Lead Partner] Bachelor’s degree in Civil Engineering [2.4] Masters in Transportation Engineering, Airport Planning or related aviation infrastructure discipline. [0.6] Minimum 20 years of General Experience [2.4] Minimum 10 years in airport master planning and design; or handled at least 02 Airport Master design [9.6] Attach Form A6 and A7 for the proposed key expert and the required documentary evidence. For foreign experts, registration with the relevant professional authority in the country of practice, where applicable, shall be submitted in place of PEC registration. Documentary evidence of qualifications shall be provided for each Key Expert. Documents in foreign languages must include an English translation (Qualitative)(Doc Required)15
Architect [Must be current employee of the foreign Lead Partner]: Bachelor’s degree in Architecture. [2.4] Minimum 15 years of General Experience in field of Architecture [1.92] Minimum 10 years in building and airport terminal building design or handled at least 02 Terminal Building Projects [7.68] Attach Form A6 and A7 for the proposed key expert and the required documentary evidence. For foreign experts, registration with the relevant professional authority in the country of practice, where applicable, shall be submitted in place of PEC registration. Documentary evidence of qualifications shall be provided for each Key Expert. Documents in foreign languages must include an English translation (Qualitative)(Doc Required)12
Interior Designer [Must be current employee of the foreign Lead Partner]: Bachelor’s degree in Interior Designing or equivalent [1.8] Minimum 15 years of General Experience in field of Interior Designing [1.44] Minimum 10 years in mass-scale public building and airport terminal building design or handled at least 01 Terminal Building Projects [5.76] Attach Form A6 and A7 for the proposed key expert and the required documentary evidence. For foreign experts, registration with the relevant professional authority in the country of practice, where applicable, shall be submitted in place of PEC registration. Documentary evidence of qualifications shall be provided for each Key Expert. Documents in foreign languages must include an English translation (Qualitative)(Doc Required)9
Airport Infrastructure Design Engineer [Must be current employee of the foreign Lead Partner]: Bachelor’s degree in Civil Engineering [1.92] Masters in Civil Engineering [0.48] Minimum 15 years general experience in Civil Engineering [1.92] Minimum 15 years in geometric, pavement, drainage and sewerage system design; or handled at least 02 Airport pertinent projects [7.68] Attach Form A6 and A7 for the proposed key expert and the required documentary evidence. For foreign experts, registration with the relevant professional authority in the country of practice, where applicable, shall be submitted in place of PEC registration. Documentary evidence of qualifications shall be provided for each Key Expert. Documents in foreign languages must include an English translation (Qualitative)(Doc Required)12
ICT / Network Design Engineer: Bachelors in Electronics / Telecommunication / Avionics / Electrical Engineering [0.36] Masters in related field [1.44] Minimum 10 years general experience in related field [1.44] Minimum 07 years in communication and navigation system design of airport; or handled at least 01 Airport ICT/Network related project [5.76] Attach Form A6 and A7 for the proposed key expert and the required documentary evidence. For foreign experts, registration with the relevant professional authority in the country of practice, where applicable, shall be submitted in place of PEC registration. Documentary evidence of qualifications shall be provided for each Key Expert. Documents in foreign languages must include an English translation (Qualitative)(Doc Required)9
Electrical Design Engineer: Bachelors in Electrical Engineering. [0.36] Masters in Electrical Engineering. [1.44] Minimum 15 years general experience in related field [1.44] Minimum 10 years in relevant electrical design and power distribution; or handled at least 01 Airport related project [5.76] Attach Form A6 and A7 for the proposed key expert and the required documentary evidence. For foreign experts, registration with the relevant professional authority in the country of practice, where applicable, shall be submitted in place of PEC registration. Documentary evidence of qualifications shall be provided for each Key Expert. Documents in foreign languages must include an English translation (Qualitative)(Doc Required)9
Terminal Electronics Facilities Design Engineer [Must be current employee of the foreign Lead Partner]: Bachelor’s degree in Electronics / Telecommunication [1.8] Minimum 15 years of General Experience in related field [1.44] Minimum 10 years in design, planning, specification and implementation of terminal facilities including FIDS, PA, EPABX, MCS, AFDS and ACS; or handled at least 02 Terminal Building Projects [5.76] Attach Form A6 and A7 for the proposed key expert and the required documentary evidence. For foreign experts, registration with the relevant professional authority in the country of practice, where applicable, shall be submitted in place of PEC registration. Documentary evidence of qualifications shall be provided for each Key Expert. Documents in foreign languages must include an English translation (Qualitative)(Doc Required)9
BHS Specialist: Bachelors in Mechanical Engineering [0.96] Masters in Mechanical Engineering [0.24] Minimum 10 years general experience in related field [0.96] Minimum 07 Years of experience in design and O&M of BHS or handled at least 02 Airport BHS related project [3.84] Attach Form A6 and A7 for the proposed key expert and the required documentary evidence. For foreign experts, registration with the relevant professional authority in the country of practice, where applicable, shall be submitted in place of PEC registration. Documentary evidence of qualifications shall be provided for each Key Expert. Documents in foreign languages must include an English translation (Qualitative)(Doc Required)6
Mechanical / HVAC Design Engineer: Bachelors in Mechanical Engineering [1.92] Masters in Mechanical Engineering [0.48] Minimum 15 years general experience in related field [1.92] Minimum 12 years in HVAC, plumbing, passenger conveying systems and fire protection systems or handled at least 02 Airport HVAC related project [7.68] Attach Form A6 and A7 for the proposed key expert and the required documentary evidence. For foreign experts, registration with the relevant professional authority in the country of practice, where applicable, shall be submitted in place of PEC registration. Documentary evidence of qualifications shall be provided for each Key Expert. Documents in foreign languages must include an English translation (Qualitative)(Doc Required)12
AFL Design Engineer: Bachelors in Electrical Engineering [1.92] Masters in Electrical Engineering [0.48 Minimum 10 years general experience in related field [1.92] Minimum 12 years at Airports or handled at least 02 Airport AFL related project [7.68] Attach Form A6 and A7 for the proposed key expert and the required documentary evidence. For foreign experts, registration with the relevant professional authority in the country of practice, where applicable, shall be submitted in place of PEC registration. Documentary evidence of qualifications shall be provided for each Key Expert. Documents in foreign languages must include an English translation (Qualitative)(Doc Required)12

 

📑 Annexure (ANX)

CONSULTANCY SERVICES FOR EXPANSION OF JINNAH TERMINAL COMPLEX [JTC] AND ALLIED AIRSIDE & LANDSIDE FACILITIES AT JINNAH INTERNATIONAL AIRPORT (JIAP), KARACHI

Published on: Wednesday, September 9, 2026 12:15 PM

Ref# : P115765
QR Code

Scope of Services

The Annexure attached hereto shall constitute an integral, essential, and binding part of the EOI Documents. The Applicant shall download the aforesaid Annexures, duly sign and stamp each page thereof, and upload the complete scanned copy as an integral part of its submission. Failure to comply with this requirement may render the application non-responsive, in accordance with the applicable procurement rules and the provisions of the EOI Documents

Technical Submission (Vendor)

Document Required

Evaluation Criteria

The Annexure attached hereto shall constitute an integral, essential, and binding part of the EOI Documents. The Applicant shall download the aforesaid Annexures, duly sign and stamp each page thereof, and upload the complete scanned copy as an integral part of its submission. Failure to comply with this requirement may render the application non-responsive, in accordance with the applicable procurement rules and the provisions of the EOI Documents

Technical Submission (Vendor)

Document Required

Letter of Application

The application forms attached as annexure shall be duly completed/filled, signed and stamped, together with all supporting documents required therein and the applicant shall upload the complete scanned copy as an integral part of its submission. Failure to comply with this requirement may render the application non-responsive, in accordance with the applicable procurement rules and the provisions of the EOI Documents.

Technical Submission (Vendor)

Document Required

Form A1

The application forms attached as annexure shall be duly completed/filled, signed and stamped, together with all supporting documents required therein and the applicant shall upload the complete scanned copy as an integral part of its submission. Failure to comply with this requirement may render the application non-responsive, in accordance with the applicable procurement rules and the provisions of the EOI Documents.

Technical Submission (Vendor)

Document Required

Form A2-A3

The application forms attached as annexure shall be duly completed/filled, signed and stamped, together with all supporting documents required therein and the applicant shall upload the complete scanned copy as an integral part of its submission. Failure to comply with this requirement may render the application non-responsive, in accordance with the applicable procurement rules and the provisions of the EOI Documents.

Technical Submission (Vendor)

Document Required

Form A4

The application forms attached as annexure shall be duly completed/filled, signed and stamped, together with all supporting documents required therein and the applicant shall upload the complete scanned copy as an integral part of its submission. Failure to comply with this requirement may render the application non-responsive, in accordance with the applicable procurement rules and the provisions of the EOI Documents.

Technical Submission (Vendor)

Document Required

Form A5

The application forms attached as annexure shall be duly completed/filled, signed and stamped, together with all supporting documents required therein and the applicant shall upload the complete scanned copy as an integral part of its submission. Failure to comply with this requirement may render the application non-responsive, in accordance with the applicable procurement rules and the provisions of the EOI Documents.

Technical Submission (Vendor)

Document Required

Form A6-A7

The application forms attached as annexure shall be duly completed/filled, signed and stamped, together with all supporting documents required therein and the applicant shall upload the complete scanned copy as an integral part of its submission. Failure to comply with this requirement may render the application non-responsive, in accordance with the applicable procurement rules and the provisions of the EOI Documents.

Technical Submission (Vendor)

Document Required

Form A8

The application forms attached as annexure shall be duly completed/filled, signed and stamped, together with all supporting documents required therein and the applicant shall upload the complete scanned copy as an integral part of its submission. Failure to comply with this requirement may render the application non-responsive, in accordance with the applicable procurement rules and the provisions of the EOI Documents.

Technical Submission (Vendor)

Document Required

Form A9

The application forms attached as annexure shall be duly completed/filled, signed and stamped, together with all supporting documents required therein and the applicant shall upload the complete scanned copy as an integral part of its submission. Failure to comply with this requirement may render the application non-responsive, in accordance with the applicable procurement rules and the provisions of the EOI Documents.

Technical Submission (Vendor)

Document Required

📑 Procurement Forms (PFD)

CONSULTANCY SERVICES FOR EXPANSION OF JINNAH TERMINAL COMPLEX [JTC] AND ALLIED AIRSIDE & LANDSIDE FACILITIES AT JINNAH INTERNATIONAL AIRPORT (JIAP), KARACHI

Published on: Wednesday, September 9, 2026 12:15 PM

Ref# : P115765
QR Code