In terms of Rule 48 of Public Procurement Rules, 2004, a Grievance Redressal Committee (GRC) is notified for the subject procurement and the notification copy is available on the procuring agency’s website and on the Authority’s website at (www.ppra.org.pk).
P&D Dte (Bahria University), Deputy Director
Deputy Director (P&D), Basement Room no. 9, Quaid Block, Bahria University, Shangrila Road, E-8, Islamabad, Islamabad Capital Territory
+92-051-926-1930
ddpd2@bahria.edu.pk
Sections of Prequalifica¬tion Documents
The following specific data for the Prequalification of Applicants shall complement, supplement, or amend the provisions in the Instructions to Applicants (ITA). Whenever there is a conflict, the provisions herein shall prevail over those in ITA.
| PDS Clause No. | ITA No. | Amendments of, and Supplements to, Clauses in the Instructions to Applicants |
A. General |
||
| 1. | 1.1 |
Identification Number of the Invitation for Prequalification: P166740 |
| 2. | 2.1 | The name of Procuring Agency is: P&D Dte (Bahria University) The name of Project / Procurement is: PRE-QUALIFICATION OF SOLAR EPC CONTRACTORS BAHRIA UNIVERSITY KARACHI CAMPUSES |
| 3. | 4.2 | Maximum number of members in a Joint Venture (JV): Nil |
| 4. | 4.5 | A list of debarred firms and individuals is available on PPRA website: https://ppra.gov.pk |
B. Contents of the Prequalification Document |
||
| 5. | 7.1 | For clarification, the Applicant shall seek clarifications through: EPADS v2.0 |
| 6. | 7.1 & 8.2 | Information related to Prequalification shall be published on: EPADS v2.0 |
| 7. | 7.2 | Pre-Application Meeting: Clarification Date: Friday, November 13, 2026 |
C. Preparation of Applications |
||
| 8. | 10.1 | This Prequalification Document has been issued in the language: English |
| 9. | 11.1(d) | Additional documents to be submitted through EPADS v2.0: (1)-Valid PEC Registration (C-4) for current year PEC (2)-Valid undertaking/ Declaration of No Litigation/ Blacklisting (3)-NTN certificate (4)-All documentary proof required as per technical evaluation criteria |
| 10. | 14.2 | Source for determining exchange rates: Not Applicable |
D. Submission of Applications |
||
| 11. | 16.1 | Deadline for Application Submission: Day: Monday Date: Monday, November 16, 2026 Time: 11:00 AM |
| 12. | 17.1 | Opening of Applications shall be conducted through: EPADS v2.0 Day: Monday Date: Monday, November 16, 2026 Time: 11:30 AM Virtual participation link: https://vendors.epads.gov.pk/ |
E. Procedures for Evaluation of Applications |
||
| 13. | 21.1 | Margin of Domestic Preference: Not Applicable (Applicable only if authorized in Procurement Plan) |
| 14. | 29.1 | Prequalification-related complaints / grievances shall be submitted in writing through: EPADS v2.0 A complaint may challenge:
|
All Active Taxpayers shall be eligible to participate in the procurement process, unless expressly excluded or otherwise restricted under the Eligibility Criteria specified by the Procuring Agency.
| Required Registration |
|---|
|
NADRA CITIZENSHIP (CNIC/NICOP) FBR (NTN) PEC |
| Eligibility Criteria | Document |
|---|---|
| The Contractor must have a valid Pakistan Engineering Council (PEC) registration (C-4 Category) with 5 years above experience. | Yes |
| Termination - The EMPLOYER may terminate the Contract by giving 14 days’ written notice if the Contractor fails to remedy performance deficiencies within the stipulated time; becomes insolvent or bankrupt; fails to comply with an arbitration decision; submits materially false statements affecting the Client’s rights; breaches the Contract or BOQ specifications; or is unable to perform substantial services for 30 days due to Force Majeure. | No |
| Liquidated Damages 1% of the cost of entire order for every day up to maximum of 10 days. If work is not done even after penalty for 10 consecutive days, the university shall have the right to cancel the contract/work order and to give the contract to next lowest bidder on risk and cost of the contractor. | No |
| Retention money - 5% Retention money will be withheld for the Defect Liability Period i.e One Year. | No |
| Risk and Cost- If the Contractor fails to complete or abandons the Works within the stipulated or extended time, the EMPLOYER may engage another firm to complete them at the Contractor’s risk and Cost. Any additional cost shall be recovered from the Retention Money and/or Performance Security; any remaining balance, after forfeiture thereof, shall be recovered through arbitration. | No |
| Defect Liability Period - a. The Contractor/Vendor shall ensure that all construction/fixing works and materials/goods supplied under this LOI are brand new and free from defects arising from design, materials, workmanship, or prevailing weather conditions. Any defect caused by the Contractor/Vendor’s act or omission shall remain its liability. b. A one-year Defect Liability Period (DLP) shall apply, commencing from the date of acceptance of the material by the end user. | No |
| c. A one-year Defect Liability Period (DLP) shall apply, commencing from the date of acceptance of the material by the end user. d. The Contractor/Vendor shall provide a Defect Liability Certificate and shall, upon written notification by the Client, rectify any defect without cost within the specified period. e. If the Contractor/Vendor fails to remedy the defect within 10 days of notice, the Client may undertake remedial action at the Contractor/Vendor’s risk and cost | No |
| Minimum amount of the running IPC should be 02 million and the payment shall be made within 30 days after verification of work by the Site Engineer or Project Director. Final Payment will be made after issuance of Acceptance Certificate by the Engineer in the shape of cheque within 56 days of completion of work. Payment will be made on actual quantity of work. | No |
| All jobs will be approved by the Engineer-(Director P&D). | No |
| The contractor will be responsible for repair/replacement of items damaged/broken during the job. | No |
| Provision of water, electricity and other amenities required at site during construction will be the responsibility of contractor. | No |
| Bid Security amounting to Rs. 10,00,000/- in the favor of Bahria University Islamabad must be submitted in hard form before the bid closing time at P&D Dte BUHO or Project Director Office, BUKC | Yes |
| Prices are to be quoted on form and format provided by Bahria University.The same is to be filled with Ball Point with hand writing in Price and Total Amount Column.All Taxes/Transportation charges etc. are to be included in the Total Cost Column. No erasing/cutting in Total Cost Column is allowed. The Grand total must be calculated arithmetically. BOQs placed as an annexure to the EPADS bidding documents shall be duly signed and stamped and submitted in original to obviate any queries. | Yes |
| Re-typed/re-generated/Photocopied format of BoQs by Supplier/Contractor are unacceptable and will make the bid non-responsive. | Yes |
| The bid, along with all required supporting documents, Bid Security and a Pay Order ofRs. 5,000/- (Non-Refundable) towards the bidding document fee, must be submitted in hard copy at the P&D Directorate, Bahria University Head Office (BUHO) or Project Director Office, BUKC Karachi , before the closing time. Failure to submit these documents within the prescribed time shall render the bid non-responsive and liable to disqualification | Yes |
Quality Based Selection (QBS)
Weightage (Without Financial Criteria)
| Technical Evaluation % |
|---|
| 100 |
| Technical Marks | 100 | |
|---|---|---|
| Passing Marks | 50 | |
| Technical Evaluation Criteria | ||
| Techincal proposal for installing of Solar System ( BOQ, drawing & enginering Estimate) (Qualitative)(Doc Required) | 40 | |
| Techinical Profile including Experience of 5 years in executing 2MW projects (at least 3) Financial Soundings : Audit Report of last Three Years Average annual Turnover Avaliable Bank Credit Line Working Capital of last five years Personal Cabaliblities : Enginners with 8 years of experience Technical Capabilities: Testing equipment and relevent machinery (Qualitative)(Doc Required) | 60 | |
This is to be considered as part of Bidding DocumentÂ
These Instructions are to be considered as part of Bidiing Document